Privileged Instruction (0xc0000096) at address 0x0023FE4C

Message boards : Number crunching : Privileged Instruction (0xc0000096) at address 0x0023FE4C
Message board moderation

To post messages, you must log in.

Previous · 1 · 2

AuthorMessage
Profile darsys (Rev. CMOT TMPV)
Volunteer tester
Avatar

Send message
Joined: 21 Jun 99
Posts: 33
Credit: 1,480,143
RAC: 0
United States
Message 292772 - Posted: 1 May 2006, 22:36:01 UTC - in response to Message 289648.  

I did get permission from work to install this client as screen saver on all our systems.

- exit code -1073741819 (0xc0000005) is concurrent with problems with the videocard or videochip on the motherboard.

Is it OpenGL capable? Are the drivers up to date? DirectX installed?
Have you tried running it without the screensaver, to see if the errors then go away?

1. Yes both are and are using the current drivers. (One is a Dell and the other an HP so it's not a brand issue)
2. How do I tell if Direct-X is installed? (I am sure this is an idiotic question)
3. No, I have yet to try it w/o the screensaver but it was working fine on the second machine for YEARS without an issue.

I'm wondering, perhaps, if any of the recent Windoze updates could have broken something.


Visit my website where you can see my Seti page, my blog, and anything else of interest. Write me at darsys at aol dot com if you want. My blog is at http;//www.darsys.net/quagmire.html
ID: 292772 · Report as offensive
Profile MikeSW17
Volunteer tester

Send message
Joined: 3 Apr 99
Posts: 1603
Credit: 2,700,523
RAC: 0
United Kingdom
Message 293576 - Posted: 2 May 2006, 22:38:23 UTC - in response to Message 292772.  

I did get permission from work to install this client as screen saver on all our systems.

- exit code -1073741819 (0xc0000005) is concurrent with problems with the videocard or videochip on the motherboard.

Is it OpenGL capable? Are the drivers up to date? DirectX installed?
Have you tried running it without the screensaver, to see if the errors then go away?

1. Yes both are and are using the current drivers. (One is a Dell and the other an HP so it's not a brand issue)
2. How do I tell if Direct-X is installed? (I am sure this is an idiotic question)
3. No, I have yet to try it w/o the screensaver but it was working fine on the second machine for YEARS without an issue.

I'm wondering, perhaps, if any of the recent Windoze updates could have broken something.



Don't see it could be a Windows update, others would have those and get similar problems if it were. You have two different machines, so it's not likely to be a specific hardware update.

That said, your machines are Dell and HP, but what common hardware do they share?
Same kind of video card? same network controller? Anything common to both?



ID: 293576 · Report as offensive
Profile Jord
Volunteer tester
Avatar

Send message
Joined: 9 Jun 99
Posts: 15184
Credit: 4,362,181
RAC: 3
Netherlands
Message 293599 - Posted: 2 May 2006, 23:05:54 UTC - in response to Message 293576.  
Last modified: 2 May 2006, 23:08:28 UTC

Don't see it could be a Windows update

I could. My Windows Update once wrecked the drivers for my Promise Ultra 133 TX2 card, which left me sitting through a boot up of 2.5 hours before I was in Windows... It was the last time I used Windows Update for drivers. :)
ID: 293599 · Report as offensive
Profile William T. Guiher

Send message
Joined: 15 Feb 01
Posts: 7
Credit: 46,768,864
RAC: 30
United States
Message 296072 - Posted: 5 May 2006, 12:01:48 UTC

Since a search for "run time errors" brought me to this page, this morning as I wiggled the mouse for the first time I was shown a C++ illegal termination message which, upon doing anything, disappeared. The BOINC manager showed the work unit as having a computational error. I just checked again to get the packet number, but it is gone.

It has now moved on to other packets.

I just thought someone should know....
ID: 296072 · Report as offensive
Profile darsys (Rev. CMOT TMPV)
Volunteer tester
Avatar

Send message
Joined: 21 Jun 99
Posts: 33
Credit: 1,480,143
RAC: 0
United States
Message 308928 - Posted: 17 May 2006, 22:50:27 UTC

Okay, you want weird? Now //ALL// the systems are reporting errors. There is no way all these PCs all had memory go bad. Oddly, it's the PC's only. These systems are not on the same network or anything like that. There has GOT to be something in common. There is no software that is on ALL the machines -- ZERO. Some have Norton and some don't. All but one have Firefox. Only two have office installed. It's just bizzare.


(The Mac shows two errors but those were caused by my client upgrade and that's my system at home.)
Visit my website where you can see my Seti page, my blog, and anything else of interest. Write me at darsys at aol dot com if you want. My blog is at http;//www.darsys.net/quagmire.html
ID: 308928 · Report as offensive
Rudy
Volunteer tester

Send message
Joined: 23 Jun 99
Posts: 189
Credit: 794,998
RAC: 0
Canada
Message 308970 - Posted: 17 May 2006, 23:27:07 UTC

Are you using a disk defragmenter on the systems?

http://www.updatexp.com/0xC0000005.html
ID: 308970 · Report as offensive
Profile darsys (Rev. CMOT TMPV)
Volunteer tester
Avatar

Send message
Joined: 21 Jun 99
Posts: 33
Credit: 1,480,143
RAC: 0
United States
Message 308987 - Posted: 17 May 2006, 23:47:28 UTC - in response to Message 308970.  

Are you using a disk defragmenter on the systems?

http://www.updatexp.com/0xC0000005.html


No, not normally. Once in a blue moon I may run one manually on my machine (Eric's Office).


Visit my website where you can see my Seti page, my blog, and anything else of interest. Write me at darsys at aol dot com if you want. My blog is at http;//www.darsys.net/quagmire.html
ID: 308987 · Report as offensive
Profile MikeSW17
Volunteer tester

Send message
Joined: 3 Apr 99
Posts: 1603
Credit: 2,700,523
RAC: 0
United Kingdom
Message 309039 - Posted: 18 May 2006, 0:28:41 UTC - in response to Message 308928.  

Okay, you want weird? Now //ALL// the systems are reporting errors. There is no way all these PCs all had memory go bad. Oddly, it's the PC's only. These systems are not on the same network or anything like that. There has GOT to be something in common. There is no software that is on ALL the machines -- ZERO. Some have Norton and some don't. All but one have Firefox. Only two have office installed. It's just bizzare.


(The Mac shows two errors but those were caused by my client upgrade and that's my system at home.)


Wierd for sure.
Just to eliminate one thing, perhaps you should run md5 against the failing exe program and post the filename and checksum.
We can check against our exes to make sure your files arn't somehow compromised.

ID: 309039 · Report as offensive
Profile darsys (Rev. CMOT TMPV)
Volunteer tester
Avatar

Send message
Joined: 21 Jun 99
Posts: 33
Credit: 1,480,143
RAC: 0
United States
Message 309565 - Posted: 18 May 2006, 15:01:31 UTC

Help me out. I've downloaded MD5. How do I make it work? I looked at but do not understand what to do. I ran the EXE file but nothing happens. How do I pass the argument to it?

Signed,
The Retard :(

Visit my website where you can see my Seti page, my blog, and anything else of interest. Write me at darsys at aol dot com if you want. My blog is at http;//www.darsys.net/quagmire.html
ID: 309565 · Report as offensive
Richard Haselgrove Project Donor
Volunteer tester

Send message
Joined: 4 Jul 99
Posts: 14679
Credit: 200,643,578
RAC: 874
United Kingdom
Message 309579 - Posted: 18 May 2006, 15:24:07 UTC - in response to Message 309565.  
Last modified: 18 May 2006, 15:24:51 UTC

Help me out. I've downloaded MD5. How do I make it work? I looked at but do not understand what to do. I ran the EXE file but nothing happens. How do I pass the argument to it?
C:\\Program Files\\BOINC\\projects\\setiathome.berkeley.edu>md5 -oseti_md5.txt setiathome_5.12_windows_intelx86.exe

does it for me: put a copy of the md5.exe into your project folder to save messing around with paths.

The example I've given puts the output into a text file 'seti_md5.txt' in the same folder. Post the contents of this textfile for MikeSW17 to look at.

ID: 309579 · Report as offensive
Richard Haselgrove Project Donor
Volunteer tester

Send message
Joined: 4 Jul 99
Posts: 14679
Credit: 200,643,578
RAC: 874
United Kingdom
Message 309586 - Posted: 18 May 2006, 15:41:46 UTC

For those that haven't come across them before, there are some very useful PowerToys available for download from Microsoft.

'Open Command Window Here' (CmdHere.exe) is very useful for this sort of job: it adds 'command prompt' to the options you get when you right-click on a folder.
ID: 309586 · Report as offensive
Profile darsys (Rev. CMOT TMPV)
Volunteer tester
Avatar

Send message
Joined: 21 Jun 99
Posts: 33
Credit: 1,480,143
RAC: 0
United States
Message 314401 - Posted: 23 May 2006, 16:52:28 UTC - in response to Message 309579.  

Help me out. I've downloaded MD5. How do I make it work? I looked at but do not understand what to do. I ran the EXE file but nothing happens. How do I pass the argument to it?
C:\\Program Files\\BOINC\\projects\\setiathome.berkeley.edu>md5 -oseti_md5.txt setiathome_5.12_windows_intelx86.exe

does it for me: put a copy of the md5.exe into your project folder to save messing around with paths.

The example I've given puts the output into a text file 'seti_md5.txt' in the same folder. Post the contents of this textfile for MikeSW17 to look at.


better late than never -- I did notice it updated 5.15 and the 5.12 was gone so I've used that.

F79C0F74478153F35471AD1678E6BABD setiathome_5.15_windows_intelx86.exe



Visit my website where you can see my Seti page, my blog, and anything else of interest. Write me at darsys at aol dot com if you want. My blog is at http;//www.darsys.net/quagmire.html
ID: 314401 · Report as offensive
Profile MikeSW17
Volunteer tester

Send message
Joined: 3 Apr 99
Posts: 1603
Credit: 2,700,523
RAC: 0
United Kingdom
Message 314518 - Posted: 23 May 2006, 21:46:28 UTC - in response to Message 314401.  


better late than never -- I did notice it updated 5.15 and the 5.12 was gone so I've used that.

F79C0F74478153F35471AD1678E6BABD setiathome_5.15_windows_intelx86.exe



Can't help now, as I am running an optimized 5.12 app and don't have a standard Berkeley release on any machine to run MD5 against.

Perhaps someone else running the standard app can do an md5 on theirs an post the finger-print?

Of course, when your problem started, it was pre-enhanced app. Since then you've downloaded two versions of enhanced, it makes the likelyhood of a corrupt download muck less likely ;(
Never the less, it is still possible that something on your systems is corrupting the file once downloaded, the MD5 comparison could still be useful in the elimination process.

ID: 314518 · Report as offensive
CJOrtega

Send message
Joined: 15 May 99
Posts: 186
Credit: 1,126,273
RAC: 0
United States
Message 314544 - Posted: 23 May 2006, 22:29:41 UTC - in response to Message 314401.  

Help me out. I've downloaded MD5. How do I make it work? I looked at but do not understand what to do. I ran the EXE file but nothing happens. How do I pass the argument to it?
C:\\Program Files\\BOINC\\projects\\setiathome.berkeley.edu>md5 -oseti_md5.txt setiathome_5.12_windows_intelx86.exe

does it for me: put a copy of the md5.exe into your project folder to save messing around with paths.

The example I've given puts the output into a text file 'seti_md5.txt' in the same folder. Post the contents of this textfile for MikeSW17 to look at.


better late than never -- I did notice it updated 5.15 and the 5.12 was gone so I've used that.

F79C0F74478153F35471AD1678E6BABD setiathome_5.15_windows_intelx86.exe





I get:

F79C0F74478153F35471AD1678E6BABD setiathome_5.15_windows_intelx86.exe

Which matches the OPs result.


ID: 314544 · Report as offensive
Profile darsys (Rev. CMOT TMPV)
Volunteer tester
Avatar

Send message
Joined: 21 Jun 99
Posts: 33
Credit: 1,480,143
RAC: 0
United States
Message 314617 - Posted: 23 May 2006, 23:54:20 UTC

As I said, this is just REALLY odd. It started with one machine and then has been slowly spreading to the other PCs. It's happening with different versions of the clients on different PCs. These machines are NOT networked in any way (though they do share a Linksys router to connect to the outside world). We have different CPUs, different OS, not even the same software. It's really, really, really, weird.

I want to say I appreciate the help so far.

Visit my website where you can see my Seti page, my blog, and anything else of interest. Write me at darsys at aol dot com if you want. My blog is at http;//www.darsys.net/quagmire.html
ID: 314617 · Report as offensive
Profile darsys (Rev. CMOT TMPV)
Volunteer tester
Avatar

Send message
Joined: 21 Jun 99
Posts: 33
Credit: 1,480,143
RAC: 0
United States
Message 329225 - Posted: 7 Jun 2006, 0:01:28 UTC - in response to Message 314617.  

Want a weird one. All of my PC clients today crashed with some sort of windows exception involving the screensaver not talking to the Seti Client. A reboot of all machines in questions cured the problem. It's just weird. REALLY weird. I somehow suspect this is all related.

Visit my website where you can see my Seti page, my blog, and anything else of interest. Write me at darsys at aol dot com if you want. My blog is at http;//www.darsys.net/quagmire.html
ID: 329225 · Report as offensive
Previous · 1 · 2

Message boards : Number crunching : Privileged Instruction (0xc0000096) at address 0x0023FE4C


 
©2024 University of California
 
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.