Panic Mode On (110) Server Problems?

Message boards : Number crunching : Panic Mode On (110) Server Problems?
Message board moderation

To post messages, you must log in.

Previous · 1 . . . 23 · 24 · 25 · 26 · 27 · 28 · 29 . . . 37 · Next

AuthorMessage
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 1921998 - Posted: 2 Mar 2018, 0:59:02 UTC - in response to Message 1921961.  

I'll never purchase one of those. Just curious about the cost/benefit calculations.


. . Well I could if I mortgaged the house ... :)

. . From what Petri had to say there are a lot of pluses, but he didn't mention how hot they run, or not as the case may be. I especially like that they are slimmer and allow more ventilation, that has to be a good thing, though even 1080ti's are slim enough if you kick off the standard cooler and go water cooling. I would like to go Nitrogen cooling but that must cost an arm and a leg. :)

Stephen

:)
ID: 1921998 · Report as offensive
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 1921999 - Posted: 2 Mar 2018, 1:00:56 UTC - in response to Message 1921962.  

I just pulled up some of your tasks and they got displayed quickly. Looking at anyone else with several thousand tasks in any category is painfully slow, if the page ever populates.

[Edit] I'm specifically trying to look at Petri's Titan V results.


. . Don't! You'll only covet his hardware ... :)

Stephen

:)

Runs too hot, goes straight into auto throttling.

Would need a full waterblock on it to make it useful for us.


. . That was exactly what I was thinking ...

. . Where did you get the details on how hot they run?

Stephen

? ?
ID: 1921999 · Report as offensive
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 1922000 - Posted: 2 Mar 2018, 1:03:51 UTC - in response to Message 1921964.  

13 tasks to come in, none of them do.
Edit...
Added the servers to my hosts file, now I get
01/03/2018 22:29:49 | SETI@home | Temporarily failed download of blc12_2bit_guppi_58137_40992_HIP64241_0041.13129.818.21.44.14.vlar: connect() failed
Oh well.


. . The upload/download servers have been somewhat flaky since the last outage. They have gone into Limbo on me just this morning (AEDT) and I had to give then a manual kick start but that did the trick.

Stephen

:(
ID: 1922000 · Report as offensive
Profile Zalster Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 27 May 99
Posts: 5517
Credit: 528,817,460
RAC: 242
United States
Message 1922005 - Posted: 2 Mar 2018, 1:21:16 UTC - in response to Message 1921999.  



. . Where did you get the details on how hot they run?

Stephen

? ?


Gamer's Nexus did a review. (I like to watch and see if he screws up and destroys any more GPUs. ) Sometime's it painful to watch, other times there is something useful in what they do.
ID: 1922005 · Report as offensive
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13164
Credit: 1,160,866,277
RAC: 1,873
United States
Message 1922006 - Posted: 2 Mar 2018, 1:26:01 UTC - in response to Message 1921998.  

I haven't seen any data anywhere so far about how hot they run doing a compute load. They have the same 250W TDP as previous card families in the top models. My 1080Ti's have the same 250W TDP and only run around 50-60% of TDP which puts the wattage consumed right around the 130W figure Petri quoted.

The chip is based on the new 12nm TSMC feature size and that is smaller and less power hungry than the previous 16nm feature size of the 1080Ti, so it may in fact run cooler.
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 1922006 · Report as offensive
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13164
Credit: 1,160,866,277
RAC: 1,873
United States
Message 1922008 - Posted: 2 Mar 2018, 1:31:19 UTC - in response to Message 1922005.  


Gamer's Nexus did a review. (I like to watch and see if he screws up and destroys any more GPUs. ) Sometime's it painful to watch, other times there is something useful in what they do.

I like Steve's Channel a lot. I like the technical details. Not sure what he screwed up though. Are you talking about the deliberate overclocking on motherboards and APUs he did recently to show that you can't believe software and BIOS settings and that you need to check actual voltages with a digital multimeter to know what exactly is being delivered to a component? I thought was very illustrative and helpful and something I did myself in the early days of Ryzen.
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 1922008 · Report as offensive
Profile Zalster Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 27 May 99
Posts: 5517
Credit: 528,817,460
RAC: 242
United States
Message 1922009 - Posted: 2 Mar 2018, 1:54:00 UTC - in response to Message 1922008.  


Gamer's Nexus did a review. (I like to watch and see if he screws up and destroys any more GPUs. ) Sometime's it painful to watch, other times there is something useful in what they do.

I like Steve's Channel a lot. I like the technical details. Not sure what he screwed up though. Are you talking about the deliberate overclocking on motherboards and APUs he did recently to show that you can't believe software and BIOS settings and that you need to check actual voltages with a digital multimeter to know what exactly is being delivered to a component? I thought was very illustrative and helpful and something I did myself in the early days of Ryzen.


No, I was referring to when he first started and was trying to disassemble a GPU with standard tools from his trucks toolbox. Stripping screwheads and breaking off posts. I think I posted a link a long time about with the label "How NOT to disassemble a GPU". There are some other videos where it's just painful to watch him mod GPUs. I think he put on an AOI cooler with the piping coming out of the front rather than from the top. He's gotten a lot better since then.
ID: 1922009 · Report as offensive
Admiral Gloval
Avatar

Send message
Joined: 31 Mar 13
Posts: 21110
Credit: 5,308,449
RAC: 0
United States
Message 1922013 - Posted: 2 Mar 2018, 2:32:07 UTC

Wanting to get something to crunch a wu so my rac won't die. Looking at a android tablet. Next book ares 8a looks interesting. tablet specs
Price tag is $68.

ID: 1922013 · Report as offensive
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13164
Credit: 1,160,866,277
RAC: 1,873
United States
Message 1922017 - Posted: 2 Mar 2018, 2:57:07 UTC - in response to Message 1922013.  

Wanting to get something to crunch a wu so my rac won't die. Looking at a android tablet. Next book ares 8a looks interesting. tablet specs
Price tag is $68.

My Amazon Kindle Fires do pretty good, especially the quad cores. Would allow you to keep posting. That tablet looks good for the price and doesn't lock you into the closed Kindle software store. The Kindle 7 is cheaper at $50 though.
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 1922017 · Report as offensive
Grant (SSSF)
Volunteer tester

Send message
Joined: 19 Aug 99
Posts: 13835
Credit: 208,696,464
RAC: 304
Australia
Message 1922041 - Posted: 2 Mar 2018, 7:02:29 UTC

Hmm.
The daily server hiccup has moved back to it's original time.
Grant
Darwin NT
ID: 1922041 · Report as offensive
Profile Stargate (SA)
Volunteer tester
Avatar

Send message
Joined: 4 Mar 10
Posts: 1854
Credit: 2,258,721
RAC: 0
Australia
Message 1922050 - Posted: 2 Mar 2018, 8:35:36 UTC

Stayed at the same time here..
ID: 1922050 · Report as offensive
Grant (SSSF)
Volunteer tester

Send message
Joined: 19 Aug 99
Posts: 13835
Credit: 208,696,464
RAC: 304
Australia
Message 1922051 - Posted: 2 Mar 2018, 8:50:00 UTC - in response to Message 1922050.  
Last modified: 2 Mar 2018, 8:57:03 UTC

Stayed at the same time here..

I've been away for a week, so it might have happened back then. But it's definitely moved back to it's original time from what it had been before I went on holidays.

Edit-
or not.
Being on holidays makes the memory not nearly as good as it was. Particularly with things such as dates, and times.
Grant
Darwin NT
ID: 1922051 · Report as offensive
kittyman Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 9 Jul 00
Posts: 51477
Credit: 1,018,363,574
RAC: 1,004
United States
Message 1922072 - Posted: 2 Mar 2018, 11:19:00 UTC
Last modified: 2 Mar 2018, 11:21:52 UTC

Check yer downloads, folks.
While I was sitting here, my GPUs stopped crunching.
Had a look-see, and all my downloads were in big backoff land....the whole GPU cache.
Probably from the server's nightly entanglement.
Had to kick them loose.
"Time is simply the mechanism that keeps everything from happening all at once."

ID: 1922072 · Report as offensive
Phil Burden

Send message
Joined: 26 Oct 00
Posts: 264
Credit: 22,303,899
RAC: 0
United Kingdom
Message 1922094 - Posted: 2 Mar 2018, 13:23:14 UTC - in response to Message 1922072.  

Check yer downloads, folks.
While I was sitting here, my GPUs stopped crunching.
Had a look-see, and all my downloads were in big backoff land....the whole GPU cache.
Probably from the server's nightly entanglement.
Had to kick them loose.


Everything fine here, maybe just a glitch?

P.
ID: 1922094 · Report as offensive
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 1922095 - Posted: 2 Mar 2018, 13:28:56 UTC - in response to Message 1922009.  
Last modified: 2 Mar 2018, 13:29:23 UTC


No, I was referring to when he first started and was trying to disassemble a GPU with standard tools from his trucks toolbox. Stripping screwheads and breaking off posts. I think I posted a link a long time about with the label "How NOT to disassemble a GPU". There are some other videos where it's just painful to watch him mod GPUs. I think he put on an AOI cooler with the piping coming out of the front rather than from the top. He's gotten a lot better since then.


. . We learn best from our mistakes .....

Stephen

<shrug>
ID: 1922095 · Report as offensive
kittyman Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 9 Jul 00
Posts: 51477
Credit: 1,018,363,574
RAC: 1,004
United States
Message 1922098 - Posted: 2 Mar 2018, 13:51:15 UTC - in response to Message 1922094.  

Check yer downloads, folks.
While I was sitting here, my GPUs stopped crunching.
Had a look-see, and all my downloads were in big backoff land....the whole GPU cache.
Probably from the server's nightly entanglement.
Had to kick them loose.


Everything fine here, maybe just a glitch?

P.

Yeah, it's all good now. The server entanglement occurs every night after midnight CST.
The download backoffs just did not run out, so my whole cache was still waiting to download.
One kick, and they all came through very well.
"Time is simply the mechanism that keeps everything from happening all at once."

ID: 1922098 · Report as offensive
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13164
Credit: 1,160,866,277
RAC: 1,873
United States
Message 1922111 - Posted: 2 Mar 2018, 15:23:47 UTC
Last modified: 2 Mar 2018, 15:24:33 UTC

No changes in the server glitch here. Still occurs just after 11PM PST or 7:00 UTC.
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 1922111 · Report as offensive
Profile Brent Norman Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester

Send message
Joined: 1 Dec 99
Posts: 2786
Credit: 685,657,289
RAC: 835
Canada
Message 1922231 - Posted: 2 Mar 2018, 23:57:33 UTC - in response to Message 1922095.  

No, I was referring to when he first started and was trying to disassemble a GPU with standard tools from his trucks toolbox. Stripping screwheads and breaking off posts. I think I posted a link a long time about with the label "How NOT to disassemble a GPU". There are some other videos where it's just painful to watch him mod GPUs. I think he put on an AOI cooler with the piping coming out of the front rather than from the top. He's gotten a lot better since then.
. . We learn best from our mistakes .....

Stephen

<shrug>
BTW, How's that Ryzen working out?
ID: 1922231 · Report as offensive
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13164
Credit: 1,160,866,277
RAC: 1,873
United States
Message 1922254 - Posted: 3 Mar 2018, 1:04:00 UTC - in response to Message 1922231.  

No, I was referring to when he first started and was trying to disassemble a GPU with standard tools from his trucks toolbox. Stripping screwheads and breaking off posts. I think I posted a link a long time about with the label "How NOT to disassemble a GPU". There are some other videos where it's just painful to watch him mod GPUs. I think he put on an AOI cooler with the piping coming out of the front rather than from the top. He's gotten a lot better since then.
. . We learn best from our mistakes .....

Stephen

<shrug>
BTW, How's that Ryzen working out?


Ha ha. LOL I think Stephen steals the World's Best Procrastinator trophy from me on that account.
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 1922254 · Report as offensive
TBar
Volunteer tester

Send message
Joined: 22 May 99
Posts: 5204
Credit: 840,779,836
RAC: 2,768
United States
Message 1922306 - Posted: 3 Mar 2018, 4:07:37 UTC
Last modified: 3 Mar 2018, 4:10:03 UTC

Anyone else having trouble pulling up the Results pages? It was Slow a little while ago, now all it does is sit there loading.

Seems there is a 48 minute delay on the SSP too, https://setiathome.berkeley.edu/show_server_status.php
ID: 1922306 · Report as offensive
Previous · 1 . . . 23 · 24 · 25 · 26 · 27 · 28 · 29 . . . 37 · Next

Message boards : Number crunching : Panic Mode On (110) Server Problems?


 
©2024 University of California
 
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.