Boinc is out ?

Author	Message
daFonseca Send message Joined: 16 May 99 Posts: 9 Credit: 250,142 RAC: 0	Message 140231 - Posted: 21 Jul 2005, 15:16:40 UTC Since some days the exchange with BOINC is horrible, today the wosrt, no jobs out or in :.(. And itÂ´s being said that a new equipment is on ... Antonio Antonio da Fonseca daFonseca - Brasil antonio@dafonseca.no-ip.org ID: 140231 ·

ldzppln Send message Joined: 19 Oct 03 Posts: 20 Credit: 640,921 RAC: 0	Message 140236 - Posted: 21 Jul 2005, 15:26:01 UTC - in response to Message 140231. Since some days the exchange with BOINC is horrible, today the wosrt, no jobs out or in :.(. And itÂ´s being said that a new equipment is on ... Antonio No work here either. BOINC is idle!! Jockstocks.com ID: 140236 ·

Pooh Bear 27 Volunteer tester Send message Joined: 14 Jul 03 Posts: 3224 Credit: 4,603,826 RAC: 0	Message 140238 - Posted: 21 Jul 2005, 15:27:14 UTC The new equipment was the up and downloaders, not splitters. The splitters are working fine, and ran out of tapes. There were plenty of tapes in last night, but we went through them all. Berkeley is just getting on campus, and I am betting new tapes will be in shortly. My movie https://vimeo.com/manage/videos/502242 ID: 140238 ·

Don Erway Volunteer tester Send message Joined: 18 May 99 Posts: 305 Credit: 471,946 RAC: 0	Message 140268 - Posted: 21 Jul 2005, 16:34:25 UTC I never ran out of work to do, all through the problem. If you leave your computers on 24/7, just up your contact frequency to 3 or 4 days, and it will stock up WUs to crunch through any slow times. If your computer is only on intermittently, it is not good to stock up so many, which may not get done in time. So maybe just 1 day contact frequency... Don ID: 140268 ·

D.J. Schweitz Volunteer tester Send message Joined: 29 Oct 02 Posts: 157 Credit: 871,078 RAC: 0	Message 140279 - Posted: 21 Jul 2005, 17:14:02 UTC Last modified: 21 Jul 2005, 17:15:31 UTC Bet ya 5 cents , Matt pops in any moment now, soon as hes finished his breakfast that is.... Click below for our Team Website ID: 140279 ·

Matt Lebofsky Volunteer moderator Project administrator Project developer Project scientist Send message Joined: 1 Mar 99 Posts: 1444 Credit: 957,058 RAC: 0	Message 140303 - Posted: 21 Jul 2005, 18:46:35 UTC Here I am. Actually working at home this morning. My arms are less than 5 miles long otherwise I'd be able to stick a new tape in the drive at the lab. I'll be up this afternoon (and it takes a while for 35GB to be read off the first tape). In the meantime, work is being generated, just not enough to keep up with all the demand (just most of the demand). - Matt -- BOINC/SETI@home network/web/science/development person -- "Any idiot can have a good idea. What is hard is to do it." - Jeanne-Claude ID: 140303 ·

D.J. Schweitz Volunteer tester Send message Joined: 29 Oct 02 Posts: 157 Credit: 871,078 RAC: 0	Message 140306 - Posted: 21 Jul 2005, 18:47:53 UTC Hi Matt.........recovered from the camping trip I hope :-) Click below for our Team Website ID: 140306 ·

daFonseca Send message Joined: 16 May 99 Posts: 9 Credit: 250,142 RAC: 0	Message 140753 - Posted: 22 Jul 2005, 10:09:40 UTC Boing, it seems, now is on but... not so well, itÂ´s confusing Where are my credits? A lot :( Antonio da Fonseca daFonseca - Brasil antonio@dafonseca.no-ip.org ID: 140753 ·

Jim Baize Volunteer tester Send message Joined: 6 May 00 Posts: 758 Credit: 149,536 RAC: 0	Message 140841 - Posted: 22 Jul 2005, 13:51:07 UTC - in response to Message 140753. The validator has to work through all of the newly uploaded WU's to make sure they are valid. Only then can the credits be issued. Plus, all the errors due to the pre-v4.19 clients might negate any positive spikes we could have possibly seen after the outage. Jim Boing, it seems, now is on but... not so well, itÂ´s confusing Where are my credits? A lot :( ID: 140841 ·

Paul D. Buck Volunteer tester Send message Joined: 19 Jul 00 Posts: 3898 Credit: 1,158,042 RAC: 0	Message 140877 - Posted: 22 Jul 2005, 15:22:02 UTC - in response to Message 140753. Boing, it seems, now is on but... not so well, itÂ´s confusing Where are my credits? A lot :( There is a "natural" delay between the time you do the work and the time you get the credit. If you look in the Wiki you can dig up explanations of the all of the issues that go into the process. Some key terms: Result Deadline Validation process Reporting Process ID: 140877 ·

daFonseca Send message Joined: 16 May 99 Posts: 9 Credit: 250,142 RAC: 0	Message 141370 - Posted: 23 Jul 2005, 11:46:50 UTC A ora es bona, a super, a su e atualiza es laborante entra tempo reasonabla. Now is working, up and download e update for credits within reasonable time. Antonio Antonio da Fonseca daFonseca - Brasil antonio@dafonseca.no-ip.org ID: 141370 ·

Simon Wiesenthal Send message Joined: 8 Feb 02 Posts: 105 Credit: 80,113 RAC: 0	Message 142608 - Posted: 25 Jul 2005, 17:30:52 UTC - in response to Message 140268. I never ran out of work to do, all through the problem. If you leave your computers on 24/7, just up your contact frequency to 3 or 4 days, and it will stock up WUs to crunch through any slow times. If your computer is only on intermittently, it is not good to stock up so many, which may not get done in time. So maybe just 1 day contact frequency... Don Ok, I give up...exactly how does one "up your contact frequency?" I've scoured the BOINC manager program without success. ID: 142608 ·

Jord Volunteer tester Send message Joined: 9 Jun 99 Posts: 15184 Credit: 4,362,181 RAC: 3	Message 142616 - Posted: 25 Jul 2005, 17:44:22 UTC - in response to Message 142608. Go to your preferences, edit, Set "Connect to network about every" to something other than it is now, Save changes. Open Boinc manager, Projects tab, select the Seti project and either use the Update button on the left or rightclick on Seti and choose Update manually from the drop down menu. (That depends on which Boinc version you use) ID: 142616 ·

Simon Wiesenthal Send message Joined: 8 Feb 02 Posts: 105 Credit: 80,113 RAC: 0	Message 142648 - Posted: 25 Jul 2005, 18:14:28 UTC - in response to Message 142616. Go to your preferences, edit, Set "Connect to network about every" to something other than it is now, Save changes. Open Boinc manager, Projects tab, select the Seti project and either use the Update button on the left or rightclick on Seti and choose Update manually from the drop down menu. (That depends on which Boinc version you use) Got 'er done, Ageless, thanks! ID: 142648 ·

©2024 University of California

SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.