Hooray? (Aug 08 2007)

Message boards : Technical News : Hooray? (Aug 08 2007)
Message board moderation

To post messages, you must log in.

1 · 2 · 3 · Next

AuthorMessage
Profile Matt Lebofsky
Volunteer moderator
Project administrator
Project developer
Project scientist
Avatar

Send message
Joined: 1 Mar 99
Posts: 1444
Credit: 957,058
RAC: 0
United States
Message 616574 - Posted: 8 Aug 2007, 22:37:26 UTC

Yesterday afternoon we were visited by many students who work with Dan Werthimer on the CASPER project. We made them analyze all the dozens of random server pieces (cases, motherboards, memory, disks, CPUs, power supplies...) that have been recently donated and try to assemble them into useful machines. They ultimately were able to only get one fully working system, and even that had only half a case. We'll probably use that system as a CASPER dedicated web server. Among these students was Daniel who is off to grad school soon so we're finally revisiting the work he did with us on web-based skymaps. We don't want that effort to go to waste (this side project languished as all parties got too busy with other things).

The database eventually recovered after we tweaked the right parameter. We were back in business by the end of the day, except one of the assimilators is still failing on a particular record in the database (one we'll probably end up needing to delete) and we still haven't been able to build up a results-to-send queue.

Jeff returned today and we all tackled getting the new multibeam client out. So the Windows version has been released, in case you haven't noticed. A Linux version, and a working Mac version (should be recompiled eventually) are also available. This client will chew on classic work until multibeam data becomes available. Speaking of that, Jeff and I are working on the splitter now. We actually fired one up, and a few hundred multibeam workunits went out to the public, but we're still doing work on the automation backend and otherwise, so don't expect a flood of new work just yet. Besides, we really should get the formal press release in order before we dive all the way into the new data. In any event: Woo-hoo!!

- Matt

-- BOINC/SETI@home network/web/science/development person
-- "Any idiot can have a good idea. What is hard is to do it." - Jeanne-Claude
ID: 616574 · Report as offensive
James Nelson
Volunteer tester
Avatar

Send message
Joined: 23 Mar 02
Posts: 381
Credit: 4,806,382
RAC: 0
United States
Message 616583 - Posted: 8 Aug 2007, 22:50:07 UTC

Great news bring on the beam (multi beam that is)
ID: 616583 · Report as offensive
Profile Dr. C.E.T.I.
Avatar

Send message
Joined: 29 Feb 00
Posts: 16019
Credit: 794,685
RAC: 0
United States
Message 616682 - Posted: 9 Aug 2007, 0:23:11 UTC

Thanks for the Update Matt - All @ Berkeley - Keep up the Great Work . . .
ID: 616682 · Report as offensive
Profile JDWhale
Volunteer tester
Avatar

Send message
Joined: 6 Apr 99
Posts: 921
Credit: 21,935,817
RAC: 3
United States
Message 616701 - Posted: 9 Aug 2007, 0:40:13 UTC

Or "Jim Beam" 'll do in a pinch !!!

> Great news bring on the beam (multi beam that is)

ID: 616701 · Report as offensive
OzzFan Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 9 Apr 02
Posts: 15691
Credit: 84,761,841
RAC: 28
United States
Message 616722 - Posted: 9 Aug 2007, 1:05:57 UTC

That's great news about MultiBeam! Another major milestone for SETI science.
ID: 616722 · Report as offensive
Arthur L. Smith

Send message
Joined: 17 Apr 02
Posts: 28
Credit: 244,050,922
RAC: 9
United States
Message 617143 - Posted: 9 Aug 2007, 19:32:39 UTC

Matt,

I have a bunch of quads that are out of work. They keep getting the following message. Any ideas?


8/9/2007 3:30:41 PM|SETI@home|Requesting 3490560 seconds of new work
8/9/2007 3:30:46 PM|SETI@home|Scheduler RPC succeeded [server version 511]
8/9/2007 3:30:46 PM|SETI@home|Deferring communication for 11 sec
8/9/2007 3:30:46 PM|SETI@home|Reason: requested by project
8/9/2007 3:30:46 PM|SETI@home|Deferring communication for 1 hr 15 min 36 sec
8/9/2007 3:30:46 PM|SETI@home|Reason: no work from project
ID: 617143 · Report as offensive
Profile KWSN - Chicken of Angnor
Volunteer developer
Volunteer tester
Avatar

Send message
Joined: 9 Jul 99
Posts: 1199
Credit: 6,615,780
RAC: 0
Austria
Message 617160 - Posted: 9 Aug 2007, 19:56:18 UTC

Hi Matt,

a rather important question that I've not got definitive information on -

what's the new stock multiplier? Right now, our info says 2.8 (vs. 3.35 for stock til now and 3.81 for MB on Beta).

Is this correct?

Without this info, we can't (won't, actually) release MB apps, so it'd be neat to have ;o)

Thanks,
Simon.
Donate to SETI@Home via PayPal!

Optimized SETI@Home apps + Information
ID: 617160 · Report as offensive
Profile Corruptor

Send message
Joined: 1 Mar 00
Posts: 4
Credit: 8,877,400
RAC: 0
Hungary
Message 617177 - Posted: 9 Aug 2007, 20:25:50 UTC - in response to Message 617143.  

Matt,

I have a bunch of quads that are out of work. They keep getting the following message. Any ideas?


8/9/2007 3:30:41 PM|SETI@home|Requesting 3490560 seconds of new work
8/9/2007 3:30:46 PM|SETI@home|Scheduler RPC succeeded [server version 511]
8/9/2007 3:30:46 PM|SETI@home|Deferring communication for 11 sec
8/9/2007 3:30:46 PM|SETI@home|Reason: requested by project
8/9/2007 3:30:46 PM|SETI@home|Deferring communication for 1 hr 15 min 36 sec
8/9/2007 3:30:46 PM|SETI@home|Reason: no work from project



The "why" can be found at this address:
http://setiathome.berkeley.edu/sah_status.html

Actually what you are interested in is the following:

sah_splitter1 kosh Disabled
sah_splitter2 klaatu Disabled
sah_splitter3 penguin Disabled
sah_splitter4 kang Disabled

Results ready to send 0 0m
Current result creation rate 0.10/sec 0m

This is why you get "no work from project" messages.
ID: 617177 · Report as offensive
Jesse Viviano

Send message
Joined: 27 Feb 00
Posts: 100
Credit: 3,949,583
RAC: 0
United States
Message 617267 - Posted: 9 Aug 2007, 22:36:37 UTC - in response to Message 617177.  

Matt,

I have a bunch of quads that are out of work. They keep getting the following message. Any ideas?


8/9/2007 3:30:41 PM|SETI@home|Requesting 3490560 seconds of new work
8/9/2007 3:30:46 PM|SETI@home|Scheduler RPC succeeded [server version 511]
8/9/2007 3:30:46 PM|SETI@home|Deferring communication for 11 sec
8/9/2007 3:30:46 PM|SETI@home|Reason: requested by project
8/9/2007 3:30:46 PM|SETI@home|Deferring communication for 1 hr 15 min 36 sec
8/9/2007 3:30:46 PM|SETI@home|Reason: no work from project



The "why" can be found at this address:
http://setiathome.berkeley.edu/sah_status.html

Actually what you are interested in is the following:

sah_splitter1 kosh Disabled
sah_splitter2 klaatu Disabled
sah_splitter3 penguin Disabled
sah_splitter4 kang Disabled

Results ready to send 0 0m
Current result creation rate 0.10/sec 0m

This is why you get "no work from project" messages.

It is better now (4.43 results per second compared to 0.10 results per second), but kang's splitter is still down. I guess that is why we are still getting no work from project messages.
ID: 617267 · Report as offensive
Profile Fuzzy Hollynoodles
Volunteer tester
Avatar

Send message
Joined: 3 Apr 99
Posts: 9659
Credit: 251,998
RAC: 0
Message 617298 - Posted: 9 Aug 2007, 23:32:38 UTC



I have finished and uploaded my last 5.17's, deleted my chicken app_info.xml, my computer is wide open and ready to grasp a main 5.27 as soon as possible. :-D

Congrats.


"I'm trying to maintain a shred of dignity in this world." - Me

ID: 617298 · Report as offensive
Profile Fred G
Avatar

Send message
Joined: 17 May 99
Posts: 185
Credit: 24,109,481
RAC: 0
United States
Message 617325 - Posted: 10 Aug 2007, 0:58:48 UTC - in response to Message 617267.  

Matt,

I have a bunch of quads that are out of work. They keep getting the following message. Any ideas?


8/9/2007 3:30:41 PM|SETI@home|Requesting 3490560 seconds of new work
8/9/2007 3:30:46 PM|SETI@home|Scheduler RPC succeeded [server version 511]
8/9/2007 3:30:46 PM|SETI@home|Deferring communication for 11 sec
8/9/2007 3:30:46 PM|SETI@home|Reason: requested by project
8/9/2007 3:30:46 PM|SETI@home|Deferring communication for 1 hr 15 min 36 sec
8/9/2007 3:30:46 PM|SETI@home|Reason: no work from project



The "why" can be found at this address:
http://setiathome.berkeley.edu/sah_status.html

Actually what you are interested in is the following:

sah_splitter1 kosh Disabled
sah_splitter2 klaatu Disabled
sah_splitter3 penguin Disabled
sah_splitter4 kang Disabled

Results ready to send 0 0m
Current result creation rate 0.10/sec 0m

This is why you get "no work from project" messages.

It is better now (4.43 results per second compared to 0.10 results per second), but kang's splitter is still down. I guess that is why we are still getting no work from project messages.


I'm still having the same problem with a couple of my systems. All but two are getting work just fine.

http://www.teamstarfire.org/
ID: 617325 · Report as offensive
Profile Ghery S. Pettit
Avatar

Send message
Joined: 7 Nov 99
Posts: 325
Credit: 28,109,066
RAC: 82
United States
Message 617422 - Posted: 10 Aug 2007, 5:55:06 UTC

I had two WUs that had been hung up trying to download for hours. And the computer wouldn't request more. So, on a hunch, I deleted the two that wouldn't download and what do you know? The computer started requesting work units again. Took a while to get some, but it's crunching again and requesting more work as well. Check and see if you have this problem, as well. It was a simple fix, but one that required that I be at the effected computer.

ID: 617422 · Report as offensive
Profile Kenn Benoît-Hutchins
Volunteer tester
Avatar

Send message
Joined: 24 Aug 99
Posts: 46
Credit: 18,091,320
RAC: 31
Canada
Message 617445 - Posted: 10 Aug 2007, 8:13:08 UTC - in response to Message 616574.  

So, and this is perhaps a question to which I should know the answer.

Are the multibeam clients the 5.10.18 (Wind) and 5.10.17 (Mac) clients
located at:

http://boinc.berkeley.edu/download_all.php

Thanks


Jeff returned today and we all tackled getting the new multibeam client out. So the Windows version has been released, in case you haven't noticed. A Linux version, and a working Mac version (should be recompiled eventually) are also available. This client will chew on classic work until multibeam data becomes available. Speaking of that, Jeff and I are working on the splitter now. We actually fired one up, and a few hundred multibeam workunits went out to the public, but we're still doing work on the automation backend and otherwise, so don't expect a flood of new work just yet. Besides, we really should get the formal press release in order before we dive all the way into the new data. In any event: Woo-hoo!!
- Matt


Kenn

What is left unsaid is neither heard, nor heeded.
Ce qui est laissé inexprimé ni n'est entendu, ni est observé.
ID: 617445 · Report as offensive
Richard Haselgrove Project Donor
Volunteer tester

Send message
Joined: 4 Jul 99
Posts: 14677
Credit: 200,643,578
RAC: 874
United Kingdom
Message 617448 - Posted: 10 Aug 2007, 8:28:17 UTC - in response to Message 617422.  

I had two WUs that had been hung up trying to download for hours. And the computer wouldn't request more. So, on a hunch, I deleted the two that wouldn't download and what do you know? The computer started requesting work units again. Took a while to get some, but it's crunching again and requesting more work as well. Check and see if you have this problem, as well. It was a simple fix, but one that required that I be at the effected computer.

Reported as a BOINC bug here. See also trac ticket 366.

Actually, I don't think we're going to see much more of this one: now that the initial replication has been cut to two, there won't be any redundant results to be cancelled by the server.
ID: 617448 · Report as offensive
Richard Haselgrove Project Donor
Volunteer tester

Send message
Joined: 4 Jul 99
Posts: 14677
Credit: 200,643,578
RAC: 874
United Kingdom
Message 617449 - Posted: 10 Aug 2007, 8:31:44 UTC - in response to Message 617445.  

So, and this is perhaps a question to which I should know the answer.

Are the multibeam clients the 5.10.18 (Wind) and 5.10.17 (Mac) clients
located at:

http://boinc.berkeley.edu/download_all.php

No. Those are BOINC clients, which manage the system and the communications with the servers for every project you're participating in.

The term 'multibeam' refers to a science application, specific to SETI@home. It will be downloaded automatically by your current version of BOINC as and when needed.
ID: 617449 · Report as offensive
Donald Ritchey

Send message
Joined: 5 Aug 99
Posts: 1
Credit: 5,884,360
RAC: 1
United States
Message 617450 - Posted: 10 Aug 2007, 8:34:37 UTC - in response to Message 616574.  

Yesterday afternoon we were visited by many students who work with Dan Werthimer on the CASPER project. We made them analyze all the dozens of random server pieces (cases, motherboards, memory, disks, CPUs, power supplies...) that have been recently donated and try to assemble them into useful machines. They ultimately were able to only get one fully working system, and even that had only half a case. We'll probably use that system as a CASPER dedicated web server. Among these students was Daniel who is off to grad school soon so we're finally revisiting the work he did with us on web-based skymaps. We don't want that effort to go to waste (this side project languished as all parties got too busy with other things).

The database eventually recovered after we tweaked the right parameter. We were back in business by the end of the day, except one of the assimilators is still failing on a particular record in the database (one we'll probably end up needing to delete) and we still haven't been able to build up a results-to-send queue.

Jeff returned today and we all tackled getting the new multibeam client out. So the Windows version has been released, in case you haven't noticed. A Linux version, and a working Mac version (should be recompiled eventually) are also available. This client will chew on classic work until multibeam data becomes available. Speaking of that, Jeff and I are working on the splitter now. We actually fired one up, and a few hundred multibeam workunits went out to the public, but we're still doing work on the automation backend and otherwise, so don't expect a flood of new work just yet. Besides, we really should get the formal press release in order before we dive all the way into the new data. In any event: Woo-hoo!!

- Matt


This is probably a dumb question BUT, do we need to download the new MB client (windows) or is it automatically upgraded? If we have to download it does it wipe out whatever we are presently doing?

Don

ID: 617450 · Report as offensive
Profile Crunch3r
Volunteer tester
Avatar

Send message
Joined: 15 Apr 99
Posts: 1546
Credit: 3,438,823
RAC: 0
Germany
Message 617453 - Posted: 10 Aug 2007, 8:45:32 UTC - in response to Message 617450.  


This is probably a dumb question BUT, do we need to download the new MB client (windows) or is it automatically upgraded? If we have to download it does it wipe out whatever we are presently doing?

Don


You don't have to do anything. It's upgraded automatically and you're allready using it ;)




Join BOINC United now!
ID: 617453 · Report as offensive
Profile Kenn Benoît-Hutchins
Volunteer tester
Avatar

Send message
Joined: 24 Aug 99
Posts: 46
Credit: 18,091,320
RAC: 31
Canada
Message 617476 - Posted: 10 Aug 2007, 10:57:46 UTC - in response to Message 617449.  

Grazie, obrigado, danke, tak, merçi, thanks.

Kenn

So, and this is perhaps a question to which I should know the answer.

Are the multibeam clients the 5.10.18 (Wind) and 5.10.17 (Mac) clients
located at:

http://boinc.berkeley.edu/download_all.php

No. Those are BOINC clients, which manage the system and the communications with the servers for every project you're participating in.

The term 'multibeam' refers to a science application, specific to SETI@home. It will be downloaded automatically by your current version of BOINC as and when needed.


Kenn

What is left unsaid is neither heard, nor heeded.
Ce qui est laissé inexprimé ni n'est entendu, ni est observé.
ID: 617476 · Report as offensive
Profile marsinph
Volunteer tester

Send message
Joined: 7 Apr 01
Posts: 172
Credit: 23,823,824
RAC: 0
Belgium
Message 617517 - Posted: 10 Aug 2007, 14:02:49 UTC
Last modified: 10 Aug 2007, 14:05:00 UTC

I hope soon we will be able to download new WU !!!
At this time, all my systems are requiring together ( not at the same time )
about 34,000,000 seconds of work, but The past 2 days i receive totally about 250,000 ( 4 WU ) . Less than 1 percent !!!
Some of my systems are now waiting from monday !!!

What happen ???
When can we hope WU again ???

It seems all server are working ( exept 1 splitter and the fixing missing results ).

ID: 617517 · Report as offensive
Profile Mad Max
Volunteer tester
Avatar

Send message
Joined: 16 Mar 00
Posts: 475
Credit: 213,231,775
RAC: 407
United States
Message 617523 - Posted: 10 Aug 2007, 14:26:48 UTC - in response to Message 616736.  
Last modified: 10 Aug 2007, 14:27:32 UTC

Does "Blame Misfit" make it into the press release?


As long as there is no 'NDA'.

Long time no see.....
IAS - Where Space Is Golden!
ID: 617523 · Report as offensive
1 · 2 · 3 · Next

Message boards : Technical News : Hooray? (Aug 08 2007)


 
©2024 University of California
 
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.