It appears that I have uploaded a couple of the work units that are pending upload since last week.

I have also completed downloading 2 of the 10 or so work units that it has been trying to download for a day.

So be patient, it may be slowly working.
I can imagine even if they are all up 100%, it will take a few days to get the uploads cleared up, and the downloads finished.

Remember
Patience, Persistence, Truth

---

Thanks, and Keep on crunchin'
John Henry KI4JPL
Sevierville TN

I started with nothing,
and I still have some of it left.
<img src="http://www.boincstats.com/stats/banner.php?cpid=989478996ebd8eadba8f0809051cdde2">

Yep, just uploaded another one.
So that makes 3 today that made it so far, be patient, and if you are constantly connected, they will slowly make it. It will take many attempts, failures, but they seem to be going slowly.
If you are not constantly connected "dial up", then you will have a tougher time, but occasionally when you do dial up yours may make it, or not, but eventually, they will all drain.

Patience, Persistence, Truth

---

Thanks, and Keep on crunchin'
John Henry KI4JPL
Sevierville TN

I started with nothing,
and I still have some of it left.
<img src="http://www.boincstats.com/stats/banner.php?cpid=989478996ebd8eadba8f0809051cdde2">

It's not that bad for us dial uppers either, I've uploaded 5 since yesterday and two Beta WUs.

[edit] dang, spoke to soon, 5 Beta WUs are now attempting to download. 5x10 hours/wu = 50 hours of work, but then I already have 12 Betas in the queue and 1 running.

I've uploaded a total of 5 results from my list... that's a little less than 4% as I figure it. I've downloaded about that many as well.

---

7,049 S@H Classic Credits

Tony,
You are having much better luck than I am I've only uploaded one seti unit, the last one crunched. It also hasn't managed to keep uploading as fast as I can crunch, Einstein has gained. And have not managed any connection to Beta.

And I'm on 24h cable connection.

Andy

I continually got the 500 message with every attempt to contact Beta prior to the outage today, after the outage it seemed to change, maybe they turned Beta back on?

[edit] OK, now it's up to 8 betas in download (none finished)

I just uploaded 3 WUs wey-hey!!
Just another couple of hundred to go :-(

---

Beta is up&running, or I must've had a free window. ;)

01/09/2005 00:03:35|SETI@home Beta Test|Started download of 03oc03aa.9124.497.261062.100
01/09/2005 00:04:53|SETI@home Beta Test|Finished download of 03oc03aa.9124.497.261062.100
01/09/2005 00:04:53|SETI@home Beta Test|Throughput 4662 bytes/sec
01/09/2005 00:04:53||request_reschedule_cpus: files downloaded

Uploads are slipping through extremely slowly. 2 Seti units so far.

---

A quick tip before I turn in for the night.

Try connecting via HTTP proxy 128.32.18.173 in the tools>options tab

I had well over a hundred WU waiting to upload (actually probably many more, but I didn't count them). They zipped through, a bit slower than normal, but with no dropped connections, downloads too.

I now have a full Seti cache on all machines and have set Einstein back to a very low priority.

---

A quick tip before I turn in for the night.

Try connecting via HTTP proxy 128.32.18.173 in the tools>options tab

I had well over a hundred WU waiting to upload (actually probably many more, but I didn't count them). They zipped through, a bit slower than normal, but with no dropped connections, downloads too.

I now have a full Seti cache on all machines and have set Einstein back to a very low priority.

finialy a helpfull post thanks so much worked like a charm.

---

A quick tip before I turn in for the night.

Try connecting via HTTP proxy 128.32.18.173 in the tools>options tab

Hi,
Many thanks for the tip - seems to work for me.

BTW: This tip would certainly win "The Tip of the Month" award (if there is any such)

Kiva

---

Greetings from Norway

Crunch3er & AK-V8 Inside

Thanks for the tip. It allowed me to upload, but now I get the requesting 0 secs of work. At least my machine is still busy with CPDN and Einstein....

/edit -
silly me, during the outage, I had set up my machine to No New Work. Changed back to Allow New Work and I just downloaded a unit...

/edit

Wendy

---

Wendy



Click Here for BOINC FAQ Service

Worked fine for me, thanks. :)

---

Yes, the proxy worked for exactly 1 WU, now it's as dead as the rest of this *censored*... :/

---

Aloha, Uli

A quick tip before I turn in for the night.

Try connecting via HTTP proxy 128.32.18.173 in the tools>options tab

I had well over a hundred WU waiting to upload (actually probably many more, but I didn't count them). They zipped through, a bit slower than normal, but with no dropped connections, downloads too.

I now have a full Seti cache on all machines and have set Einstein back to a very low priority.

Worked for me as well (hippee), shame I can't get to my other machines for 10hrs. Why would a proxy work and not a standard connection?

I'll be waiting with baited(?) breath (I wondered why my breath smelt) to see if they get validated since they were all passed the deadline.

Live long and crunch.

Paul.

Try connecting via HTTP proxy 128.32.18.173 in the tools>options tab

Worked for me as well. All Seti and Seti-beta ups and downs now complete.

If we had a "post of the month" scheme here you would get my vote, in the mean time a + will have to suffice.

A quick tip before I turn in for the night.

Try connecting via HTTP proxy 128.32.18.173 in the tools>options tab

I had well over a hundred WU waiting to upload (actually probably many more, but I didn't count them). They zipped through, a bit slower than normal, but with no dropped connections, downloads too.

I now have a full Seti cache on all machines and have set Einstein back to a very low priority.

Wow, now that is what i called help !!!! Thank You !! Mr. Nightlord !!!

---

BOINC SYNERGY is an International Team and We Welcome All BOINC Participants!
BOINC Synergy Click to Join BOINC Synergy

That proxy worked for me too, uploaded 2 WUs that had been trying for 24 hours and downloaded 2 that had been trying for that long as well.
THANKS

---

now thats the kind of info we need on the front page, something as simple as use HTTP proxy 128.32.18.137 for now.

---

now thats the kind of info we need on the front page, something as simple as use HTTP proxy 128.32.18.137 for now.

I would only use it for as long as needed to clear your cache, and then go back to 'normal.' Having many, many users keeping the proxy setting for long periods could cause all sorts of problems with the server.

BTW, excellent bit of detective work on finding that work-around!