Message boards :
Number crunching :
GPU tribulations
Message board moderation
Author | Message |
---|---|
robertmiles Send message Joined: 16 Jan 12 Posts: 213 Credit: 4,117,756 RAC: 6 |
SIV only partly installed. It looks like Windows Vista does not recognize its method of driver signatures, and refuses to install its drivers. It still produces a flood of information, which makes it hard to find the relevant parts. On my other computer, the 440 is now producing many valids and no inconclusives, but few of what it runs are SoG. |
robertmiles Send message Joined: 16 Jan 12 Posts: 213 Credit: 4,117,756 RAC: 6 |
Yeah, have to agree about the "kiss of death" regarding bulging capacitors on motherboards. Unlikely too that he will be able to see small ripple voltages with just a simple DVM unless he's ordered a really expensive one which the bulging capacitor almost certainly is producing. If I remember an earlier post correctly, the motherboard is a 1999 Dell vintage. That puts in right at the beginning of the bad capacitor plague caused by the bad stolen industrial espionage electrolyte recipe. The legs are not long enough for that. |
robertmiles Send message Joined: 16 Jan 12 Posts: 213 Credit: 4,117,756 RAC: 6 |
[snip] I tried IObit Uninstaller on the computer that keeps thinking the GTS 450 is a 9800 GT. Two problems with it so far: It makes it too easy to uninstall programs without knowing what they are. I let it uninstall a program because I did not recognize it as anything I wanted - but that program turned out to be the way that computer was connecting to the internet. I'm now looking where I can download it (Bonjour for Windows) - rather hard to find. Whenever I tell it to uninstall the Nvidia driver, the next Windows restart makes it find an even older version of that driver that it did not see before - and that older version also thinks the GTS 450 is a 9800GT. |
Stephen "Heretic" Send message Joined: 20 Sep 12 Posts: 5557 Credit: 192,787,363 RAC: 628 |
. . I have a policy that unless I know what a program is, if software says to uninstall it I don't. Then I look up what the program is and if not important/useful the next time I let the "cleanup" software remove it. . . Wouldn't another internet interface work? Try looking up alternative/replacement programs for bonjour. . . I suggested you remove ALL existing drivers but I might not have made that clear. That way you get what you are after, a CLEAN install. Stephen . |
Wiggo Send message Joined: 24 Jan 00 Posts: 34841 Credit: 261,360,520 RAC: 489 |
Removing "Bonjour for Windows" should not interfere with your internet connection and that program is usually installed with iTunes. Now to the GTS 450, if that is the OEM version then yes I can see how that would be confused with the 9800GT as it's just an overclocked version of the 9800GT with all other spec's being the same. If it's not the OEM version then something strange is going on. Cheers. |
Jimbocous Send message Joined: 1 Apr 13 Posts: 1853 Credit: 268,616,081 RAC: 1,349 |
Now to the GTS 450, if that is the OEM version then yes I can see how that would be confused with the 9800GT as it's just an overclocked version of the 9800GT with all other spec's being the same. So if nothing has changed in the last little bit, that means that 341.96 would be the last appropriate driver for that board.... Running that and specifying a "clean install" during it's installation should be all that's needed to resolve this. Just went through this exercise with a 9800 I sold... |
Keith Myers Send message Joined: 29 Apr 01 Posts: 13164 Credit: 1,160,866,277 RAC: 1,873 |
What you do is to cut the electrolytic canister apart down the side and peel the shell away from the guts. That will expose the internal solder legs terminating on the plates. That gives you enough length to solder the new capacitor onto the original caps solder pins. You don't even need to unsolder the original cap from the motherboard. That way you don't risk damaging things further. This is the common method to replace the failed bad recipe capacitors from the motherboard. Seti@Home classic workunits:20,676 CPU time:74,226 hours A proud member of the OFA (Old Farts Association) |
Stephen "Heretic" Send message Joined: 20 Sep 12 Posts: 5557 Credit: 192,787,363 RAC: 628 |
. . And if available it would be cautious to use a new one with slightly higher voltage rating than the old one. Just to be sure to be sure. Stephen . |
Stephen "Heretic" Send message Joined: 20 Sep 12 Posts: 5557 Credit: 192,787,363 RAC: 628 |
leaving this current thread for a sec ... . . Hi Ed, . . That is the beauty/purpose of higher level instruction sets, they are what can be called a hardware abstraction layer which allows the execution of software that is written more independently of the hardware platform it will be running on. And from what you have said, AMD have done a better job than Nvidia. :) . . It is strange that the AMD OpenCL engine could work so well with the Nvidia hardware interface. Probably it was that the app was using the AMD OpenCL instruction set because the old AMD drivers were there, but it was the Nvidia OpenCL engine that was executing them. Might be something to be learned from that. Stephen . |
Jimbocous Send message Joined: 1 Apr 13 Posts: 1853 Credit: 268,616,081 RAC: 1,349 |
. . It is strange that the AMD OpenCL engine could work so well with the Nvidia hardware interface. Probably it was that the app was using the AMD OpenCL instruction set because the old AMD drivers were there, but it was the Nvidia OpenCL engine that was executing them. Might be something to be learned from that. Does raise some interesting thoughts, does it not? |
robertmiles Send message Joined: 16 Jan 12 Posts: 213 Credit: 4,117,756 RAC: 6 |
Removing "Bonjour for Windows" should not interfere with your internet connection and that program is usually installed with iTunes. I used the uninstall program (name not currently visible) to remove the Nvidia driver. I restarted Windows (twice - some of the changes didn't complete fully the first time) and found that it was now using an older version of the same driver. Repeated this around 30 times, until the uninstall program could no longer find a driver to remove, but the other software said some driver was still in use and finding a 9800 gt. Perhaps 10 GB of hard drive space recovered by all this, though. I decided the check if the graphics board was marked as a GTS 450. Surprise - it's only marked with an HP part number. I now suspect that it is actually a 9800 GT, even though it was in the box for the GTS 450 I replaced the 9800 GT with. Two more motherboard electrolytic capacitors with rounded ends spotted. Unclear if they were there before but not spotted. I no longer have enough use of one hand to think it's worthwhile to get new soldering tools and try to replace them, even with the suggestions above. I then replaced it with a GTX 750 Ti. Most of the software agreed that it actually was a GTX 750 Ti. MSI Afterburner wouldn't even start with it, though. I'm now upgrading the driver to 362.00 (the latest driver known to both install under Vista and work properly for OpenCL) to see if that fixes more of the problems. I'll also install iTunes, to see if that restores Bonjour for Windows. A package that may contain the voltmeter has arrived, so I'll prepare to check voltages. |
EdwardPF Send message Joined: 26 Jul 99 Posts: 389 Credit: 236,772,605 RAC: 374 |
Does raise some interesting thoughts, does it not? Perhaps about my sanity ... I restored the old drivers Just 'cause Ed F |
Jeff Buck Send message Joined: 11 Feb 00 Posts: 1441 Credit: 148,764,870 RAC: 0 |
Does raise some interesting thoughts, does it not? What I find interesting is that both with your original setup, and now with your restored drivers, the Stderr is showing both AMD and NVIDIA OpenCL being detected, with AMD first, followed by NVIDIA: Priority of process adjusted successfully, below normal priority class used OpenCL platform detected: Advanced Micro Devices, Inc. OpenCL platform detected: NVIDIA Corporation BOINC assigns device 0 For those hours in between, it was only showing NVIDIA: Priority of process adjusted successfully, below normal priority class used OpenCL platform detected: NVIDIA Corporation BOINC assigns device 0 So, while the AMD OpenCL was recognized, I'm not sure it was actually being used, as long as the NVIDIA was found afterwards. EDIT: Also, if you look further down in the Stderr currently, you'll see: Number of OpenCL platforms: 2 whereas it only showed 1 platform when you just had the NVIDIA driver installed. EDIT2: And continuing on down, it shows: OpenCL Platform Name: ATI Stream Number of devices: 0 OpenCL Platform Name: NVIDIA CUDA Number of devices: 1 It knows there's just 1 device, and it's NVIDIA. I think Raistmer's got it covered. :^) |
robertmiles Send message Joined: 16 Jan 12 Posts: 213 Credit: 4,117,756 RAC: 6 |
For the computer that had the 560: [snip] 362.00 failed to install, and did not show why. iTunes failed to install, and said Windows Installer Service could not be accessed. I started Services, scrolled down, and found two entries for Windows Installer Service. One was 32-bit, and was already started even though it was under 64-bit Windows Vista. The other was 64-bit and labelled as to be started manually. All attempts to start it failed with an error message saying that it could not start in Safe Mode - even though I didn't tell Windows to start in Safe Mode. The package contained the voltmeter, so I'll check voltages the next time I have the case open. I found two diagnostic programs for checking the hardware. One passed, but did not check the Ethernet interface needed for an internet connection. The other said it it could not run the section for checking the Ethernet interface but did not explain why. A Google search for the HP part number indicates that the board the drivers called a 9800 GT is actually a 9800 GT. On a related subject, do any of you know whether it is safe to use a USB cable with type A connectors to connect two computers in hopes that will give an internet connection that does not use Ethernet? |
Wiggo Send message Joined: 24 Jan 00 Posts: 34841 Credit: 261,360,520 RAC: 489 |
Does raise some interesting thoughts, does it not? Do you have any left over Steam directories, games, installations that were installed from when you were running that AMD/ATi card? If you do then that's likely why, but I wouldn't worry about it too much as you get "OpenCL Platform Name: ATI Stream: Number of devices: 0" as SETI knows that there arn't any. ;-) Cheers. |
Stephen "Heretic" Send message Joined: 20 Sep 12 Posts: 5557 Credit: 192,787,363 RAC: 628 |
Does raise some interesting thoughts, does it not? . . But that does not explain why it stopped working when he first uninstalled the AMD drivers. That would tend to suggest it had been using them. Computers can be such "interesting" things. :) Stephen . |
Jeff Buck Send message Joined: 11 Feb 00 Posts: 1441 Credit: 148,764,870 RAC: 0 |
. . But that does not explain why it stopped working when he first uninstalled the AMD drivers. That would tend to suggest it had been using them. Computers can be such "interesting" things. :) It could be that the uninstall of the AMD driver took out a .dll that was common to both platforms. I'm thinking that might happen if the AMD driver was installed first and the NVIDIA driver added later. If there's an uninstall log, that might provide a clue, but probably not worth trying to track it down. |
robertmiles Send message Joined: 16 Jan 12 Posts: 213 Credit: 4,117,756 RAC: 6 |
For the computer that had the 560: The last few restarts did not ask me if I wanted Safe Mode, so I suspect it was going into that mode without asking, and therefore blocking iTunes plus Bonjour from installing. A mistake in BIOS settings kept me from even booting the computer for several hours. Now probably fixed. I found the GTS 450 and my analog modems - I may try them later. |
Stephen "Heretic" Send message Joined: 20 Sep 12 Posts: 5557 Credit: 192,787,363 RAC: 628 |
. . But that does not explain why it stopped working when he first uninstalled the AMD drivers. That would tend to suggest it had been using them. Computers can be such "interesting" things. :) . . True, once the problem is solved move on :) Stephen |
Stephen "Heretic" Send message Joined: 20 Sep 12 Posts: 5557 Credit: 192,787,363 RAC: 628 |
For the computer that had the 560: . . Hopefully the GTS450 will give much better results. Stephen |
©2024 University of California
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.