Downloads stuck.


log in

Advanced search

Message boards : Number crunching : Downloads stuck.

1 · 2 · Next
Author Message
Batter Up
Avatar
Send message
Joined: 5 May 99
Posts: 509
Credit: 24,826,615
RAC: 22,650
United States
Message 1466064 - Posted: 19 Jan 2014, 4:21:02 UTC

I have reset the program several times, I reinstalled it twice and the firsat download still freezes at 78%.
____________

Batter Up
Avatar
Send message
Joined: 5 May 99
Posts: 509
Credit: 24,826,615
RAC: 22,650
United States
Message 1466128 - Posted: 19 Jan 2014, 9:02:37 UTC

OK somebody kick the server; I did a format C and still my downloads freeze.
____________

Profile Wiggo
Avatar
Send message
Joined: 24 Jan 00
Posts: 5250
Credit: 83,468,213
RAC: 73,995
Australia
Message 1466129 - Posted: 19 Jan 2014, 9:06:56 UTC

No problems here and both the SSP and Cricket graphs are fine.

Have you rebooted your modem?

Cheers.

Batter Up
Avatar
Send message
Joined: 5 May 99
Posts: 509
Credit: 24,826,615
RAC: 22,650
United States
Message 1466136 - Posted: 19 Jan 2014, 9:30:01 UTC - in response to Message 1466129.

No problems here and both the SSP and Cricket graphs are fine.

Have you rebooted your modem?

Cheers.

I'm on line now; it has to be the server, I formatted C and got the same thing the first download freezes.

I have another machine off the same router downloading just fine.
____________

Profile Wiggo
Avatar
Send message
Joined: 24 Jan 00
Posts: 5250
Credit: 83,468,213
RAC: 73,995
Australia
Message 1466141 - Posted: 19 Jan 2014, 9:40:09 UTC

I can only think that the problem must be just with that rig then as if it was the servers then the "Panic Mode On" thread would be buzzing.

Cheers.

Profile Wiggo
Avatar
Send message
Joined: 24 Jan 00
Posts: 5250
Credit: 83,468,213
RAC: 73,995
Australia
Message 1466145 - Posted: 19 Jan 2014, 9:56:53 UTC

You could try this trick, http://setiathome.berkeley.edu/forum_thread.php?id=71002&postid=1343415, and see if that helps you.

Cheers.

Profile Ageless
Avatar
Send message
Joined: 9 Jun 99
Posts: 12131
Credit: 2,525,065
RAC: 551
Netherlands
Message 1466208 - Posted: 19 Jan 2014, 13:52:30 UTC - in response to Message 1466136.
Last modified: 19 Jan 2014, 13:53:21 UTC

I have another machine off the same router downloading just fine.

Which shows that it isn't the server, then. If another one of your computers on the same network can download without problems, and your freshly formatted machine cannot, it's a problem with your freshly formatted machine. I take it that you installed an OS on it after formatting? And that you set up the network and firewall in that OS correctly?

When doing CTRL+SHIFT+E in BOINC Manager, what does it say when the download stalls? Post those messages, please.
____________
Jord

Loving awareness is free.

Batter Up
Avatar
Send message
Joined: 5 May 99
Posts: 509
Credit: 24,826,615
RAC: 22,650
United States
Message 1466226 - Posted: 19 Jan 2014, 14:56:09 UTC

This is my log. When I formatted C I used the same name for the machine and the server found it.

1/19/2014 9:44:06 AM | | cc_config.xml not found - using defaults
1/19/2014 9:44:06 AM | | Starting BOINC client version 7.2.33 for windows_x86_64
1/19/2014 9:44:06 AM | | log flags: file_xfer, sched_ops, task
1/19/2014 9:44:06 AM | | Libraries: libcurl/7.25.0 OpenSSL/1.0.1 zlib/1.2.6
1/19/2014 9:44:06 AM | | Data directory: C:\ProgramData\BOINC
1/19/2014 9:44:06 AM | | Running under account Computer Genius Man
1/19/2014 9:44:06 AM | | CUDA: NVIDIA GPU 0: GeForce GTX 690 (driver version 332.21, CUDA version 6.0, compute capability 3.0, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 9:44:06 AM | | CUDA: NVIDIA GPU 1: GeForce GTX 690 (driver version 332.21, CUDA version 6.0, compute capability 3.0, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 9:44:06 AM | | CUDA: NVIDIA GPU 2: GeForce GTX 690 (driver version 332.21, CUDA version 6.0, compute capability 3.0, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 9:44:06 AM | | CUDA: NVIDIA GPU 3: GeForce GTX 690 (driver version 332.21, CUDA version 6.0, compute capability 3.0, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 9:44:06 AM | | CUDA: NVIDIA GPU 4: GeForce GTX 690 (driver version 332.21, CUDA version 6.0, compute capability 3.0, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 9:44:06 AM | | CUDA: NVIDIA GPU 5: GeForce GTX 690 (driver version 332.21, CUDA version 6.0, compute capability 3.0, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 9:44:06 AM | | CUDA: NVIDIA GPU 6: GeForce GTX 690 (driver version 332.21, CUDA version 6.0, compute capability 3.0, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 9:44:06 AM | | CUDA: NVIDIA GPU 7: GeForce GTX 690 (driver version 332.21, CUDA version 6.0, compute capability 3.0, 2048MB, 1887MB available, 3132 GFLOPS peak)
1/19/2014 9:44:06 AM | | OpenCL: NVIDIA GPU 0: GeForce GTX 690 (driver version 332.21, device version OpenCL 1.1 CUDA, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 9:44:06 AM | | OpenCL: NVIDIA GPU 1: GeForce GTX 690 (driver version 332.21, device version OpenCL 1.1 CUDA, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 9:44:06 AM | | OpenCL: NVIDIA GPU 2: GeForce GTX 690 (driver version 332.21, device version OpenCL 1.1 CUDA, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 9:44:06 AM | | OpenCL: NVIDIA GPU 3: GeForce GTX 690 (driver version 332.21, device version OpenCL 1.1 CUDA, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 9:44:06 AM | | OpenCL: NVIDIA GPU 4: GeForce GTX 690 (driver version 332.21, device version OpenCL 1.1 CUDA, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 9:44:06 AM | | OpenCL: NVIDIA GPU 5: GeForce GTX 690 (driver version 332.21, device version OpenCL 1.1 CUDA, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 9:44:06 AM | | OpenCL: NVIDIA GPU 6: GeForce GTX 690 (driver version 332.21, device version OpenCL 1.1 CUDA, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 9:44:06 AM | | OpenCL: NVIDIA GPU 7: GeForce GTX 690 (driver version 332.21, device version OpenCL 1.1 CUDA, 2048MB, 1887MB available, 3132 GFLOPS peak)
1/19/2014 9:44:06 AM | | Host name: Scary
1/19/2014 9:44:06 AM | | Processor: 12 GenuineIntel Intel(R) Core(TM) i7-3960X CPU @ 3.30GHz [Family 6 Model 45 Stepping 7]
1/19/2014 9:44:06 AM | | Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss htt tm pni ssse3 cx16 sse4_1 sse4_2 popcnt aes nx lm vmx tm2 dca pbe
1/19/2014 9:44:06 AM | | OS: Microsoft Windows 8.1: x64 Edition, (06.03.9600.00)
1/19/2014 9:44:06 AM | | Memory: 11.94 GB physical, 14.32 GB virtual
1/19/2014 9:44:06 AM | | Disk: 118.72 GB total, 97.34 GB free
1/19/2014 9:44:06 AM | | Local time is UTC -8 hours
1/19/2014 9:44:06 AM | SETI@home | URL http://setiathome.berkeley.edu/; Computer ID 7189954; resource share 100
1/19/2014 9:44:06 AM | SETI@home | General prefs: from SETI@home (last modified 15-Jan-2014 10:56:10)
1/19/2014 9:44:06 AM | SETI@home | Computer location: home
1/19/2014 9:44:06 AM | SETI@home | General prefs: no separate prefs for home; using your defaults
1/19/2014 9:44:06 AM | | Preferences:
1/19/2014 9:44:06 AM | | max memory usage when active: 6113.51MB
1/19/2014 9:44:06 AM | | max memory usage when idle: 11004.31MB
1/19/2014 9:44:06 AM | | max disk usage: 59.36GB
1/19/2014 9:44:06 AM | | (to change preferences, visit a project web site or select Preferences in the Manager)
1/19/2014 9:44:06 AM | | Not using a proxy
1/19/2014 9:44:10 AM | SETI@home | Started download of setiathome_7.00_windows_intelx86__cuda50.exe
1/19/2014 9:44:10 AM | SETI@home | Started download of cudart32_50_35.dll
1/19/2014 9:44:10 AM | SETI@home | Sending scheduler request: To fetch work.
1/19/2014 9:44:10 AM | SETI@home | Requesting new tasks for NVIDIA
1/19/2014 9:44:11 AM | SETI@home | Temporarily failed download of setiathome_7.00_windows_intelx86__cuda50.exe: can't resolve hostname
1/19/2014 9:44:11 AM | SETI@home | Backing off 00:07:26 on download of setiathome_7.00_windows_intelx86__cuda50.exe
1/19/2014 9:44:11 AM | SETI@home | Temporarily failed download of cudart32_50_35.dll: can't resolve hostname
1/19/2014 9:44:11 AM | SETI@home | Backing off 00:04:18 on download of cudart32_50_35.dll
1/19/2014 9:44:11 AM | SETI@home | Started download of cufft32_50_35.dll
1/19/2014 9:44:11 AM | SETI@home | Started download of 28mr08ai.26771.11933.438086664201.12.189
1/19/2014 9:44:11 AM | SETI@home | Scheduler request failed: Couldn't resolve host name
1/19/2014 9:44:12 AM | SETI@home | Temporarily failed download of cufft32_50_35.dll: can't resolve hostname
1/19/2014 9:44:12 AM | SETI@home | Backing off 00:03:08 on download of cufft32_50_35.dll
1/19/2014 9:44:12 AM | SETI@home | Temporarily failed download of 28mr08ai.26771.11933.438086664201.12.189: can't resolve hostname
1/19/2014 9:44:12 AM | SETI@home | Backing off 00:05:49 on download of 28mr08ai.26771.11933.438086664201.12.189
1/19/2014 9:44:12 AM | SETI@home | Started download of 21oc13ac.26736.54158.438086664207.12.230
1/19/2014 9:44:12 AM | SETI@home | Started download of 28mr08ai.26771.11933.438086664201.12.141
1/19/2014 9:44:36 AM | | Project communication failed: attempting access to reference site
1/19/2014 9:44:38 AM | | Internet access OK - project servers may be temporarily down.
1/19/2014 9:49:14 AM | SETI@home | Temporarily failed download of 21oc13ac.26736.54158.438086664207.12.230: transient HTTP error
1/19/2014 9:49:14 AM | SETI@home | Backing off 00:03:35 on download of 21oc13ac.26736.54158.438086664207.12.230
1/19/2014 9:49:14 AM | SETI@home | Temporarily failed download of 28mr08ai.26771.11933.438086664201.12.141: transient HTTP error
1/19/2014 9:49:14 AM | SETI@home | Backing off 00:03:47 on download of 28mr08ai.26771.11933.438086664201.12.141
1/19/2014 9:49:14 AM | SETI@home | Started download of 28mr08ai.26771.11933.438086664201.12.196
1/19/2014 9:49:14 AM | SETI@home | Started download of 21oc13ac.26736.54158.438086664207.12.137
1/19/2014 9:49:15 AM | | Project communication failed: attempting access to reference site
1/19/2014 9:49:18 AM | | Internet access OK - project servers may be temporarily down.

____________

Profile Guy
Volunteer moderator
Send message
Joined: 3 Apr 99
Posts: 1987
Credit: 30,396,814
RAC: 159,902
United States
Message 1466234 - Posted: 19 Jan 2014, 15:08:51 UTC
Last modified: 21 Mar 2014, 23:35:17 UTC

--

Batter Up
Avatar
Send message
Joined: 5 May 99
Posts: 509
Credit: 24,826,615
RAC: 22,650
United States
Message 1466240 - Posted: 19 Jan 2014, 15:17:55 UTC
Last modified: 19 Jan 2014, 15:21:46 UTC

I'm posting from the machine I post therefore I am. I am cold too; "polar vortex" and no heat. :-(

From my log;

1/19/2014 9:49:15 AM | | Project communication failed: attempting access to reference site
1/19/2014 9:49:18 AM | | Internet access OK - project servers may be temporarily down.

____________

Profile Ageless
Avatar
Send message
Joined: 9 Jun 99
Posts: 12131
Credit: 2,525,065
RAC: 551
Netherlands
Message 1466247 - Posted: 19 Jan 2014, 15:35:18 UTC - in response to Message 1466226.
Last modified: 19 Jan 2014, 15:36:56 UTC

1/19/2014 9:44:11 AM | SETI@home | Scheduler request failed: Couldn't resolve host name

Mind, this error has nothing to do with your computer name, or the hostID it gets at Seti. This is a TCP/IP error that means that you do not have the entry for the server you are trying to connect to --in this case the Seti server-- in your hosts file or TCP/IP network configuration (ipconfig).

Now, the Seti server you're trying to connect to through BOINC is NOT the same server as we're posting on, so it will not have IP address 169.229.217.150 and therefore you cannot say that since you can post here, that your machine does not have problems connecting to Seti.

So, time to see what BOINC makes of it. Let's make a cc_config.xml file, if you don't have one yet. Open Notepad and type/copy into it:
<cc_config>
<log_flags>
<http_debug>1</http_debug>
<http_xfer_debug>1</http_xfer_debug>
</log_flags>
</cc_config>

Save as...
Save as type: All Files
file name cc_config.xml
format: ANSI
Save to C:\Programdata\BOINC\
(double check in the directory that the extension is only .xml, not .xml.txt)
(The directory will be hidden. Either navigate to it directly by filling in the path in Windows Explorer, or tell Windows to show hidden files and folders.)


Next open BOINC Manager->Advanced view->Advanced->Read config files.
Then open Event Log (CTRL+SHIFT+E) and copy and paste (post) the whole communication, including any IP addresses it resolves.
____________
Jord

Loving awareness is free.

Batter Up
Avatar
Send message
Joined: 5 May 99
Posts: 509
Credit: 24,826,615
RAC: 22,650
United States
Message 1466281 - Posted: 19 Jan 2014, 16:37:06 UTC

1/19/2014 11:29:10 AM | | Starting BOINC client version 7.2.33 for windows_x86_64
1/19/2014 11:29:10 AM | | log flags: file_xfer, sched_ops, task, http_debug, http_xfer_debug
1/19/2014 11:29:10 AM | | Libraries: libcurl/7.25.0 OpenSSL/1.0.1 zlib/1.2.6
1/19/2014 11:29:10 AM | | Data directory: C:\ProgramData\BOINC
1/19/2014 11:29:10 AM | | Running under account Computer Genius Man
1/19/2014 11:29:10 AM | | CUDA: NVIDIA GPU 0: GeForce GTX 690 (driver version 332.21, CUDA version 6.0, compute capability 3.0, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 11:29:10 AM | | CUDA: NVIDIA GPU 1: GeForce GTX 690 (driver version 332.21, CUDA version 6.0, compute capability 3.0, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 11:29:10 AM | | CUDA: NVIDIA GPU 2: GeForce GTX 690 (driver version 332.21, CUDA version 6.0, compute capability 3.0, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 11:29:10 AM | | CUDA: NVIDIA GPU 3: GeForce GTX 690 (driver version 332.21, CUDA version 6.0, compute capability 3.0, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 11:29:10 AM | | CUDA: NVIDIA GPU 4: GeForce GTX 690 (driver version 332.21, CUDA version 6.0, compute capability 3.0, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 11:29:10 AM | | CUDA: NVIDIA GPU 5: GeForce GTX 690 (driver version 332.21, CUDA version 6.0, compute capability 3.0, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 11:29:10 AM | | CUDA: NVIDIA GPU 6: GeForce GTX 690 (driver version 332.21, CUDA version 6.0, compute capability 3.0, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 11:29:10 AM | | CUDA: NVIDIA GPU 7: GeForce GTX 690 (driver version 332.21, CUDA version 6.0, compute capability 3.0, 2048MB, 1882MB available, 3132 GFLOPS peak)
1/19/2014 11:29:10 AM | | OpenCL: NVIDIA GPU 0: GeForce GTX 690 (driver version 332.21, device version OpenCL 1.1 CUDA, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 11:29:10 AM | | OpenCL: NVIDIA GPU 1: GeForce GTX 690 (driver version 332.21, device version OpenCL 1.1 CUDA, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 11:29:10 AM | | OpenCL: NVIDIA GPU 2: GeForce GTX 690 (driver version 332.21, device version OpenCL 1.1 CUDA, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 11:29:10 AM | | OpenCL: NVIDIA GPU 3: GeForce GTX 690 (driver version 332.21, device version OpenCL 1.1 CUDA, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 11:29:10 AM | | OpenCL: NVIDIA GPU 4: GeForce GTX 690 (driver version 332.21, device version OpenCL 1.1 CUDA, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 11:29:10 AM | | OpenCL: NVIDIA GPU 5: GeForce GTX 690 (driver version 332.21, device version OpenCL 1.1 CUDA, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 11:29:10 AM | | OpenCL: NVIDIA GPU 6: GeForce GTX 690 (driver version 332.21, device version OpenCL 1.1 CUDA, 2048MB, 1949MB available, 3132 GFLOPS peak)
1/19/2014 11:29:10 AM | | OpenCL: NVIDIA GPU 7: GeForce GTX 690 (driver version 332.21, device version OpenCL 1.1 CUDA, 2048MB, 1882MB available, 3132 GFLOPS peak)
1/19/2014 11:29:10 AM | | Host name: Scary
1/19/2014 11:29:10 AM | | Processor: 12 GenuineIntel Intel(R) Core(TM) i7-3960X CPU @ 3.30GHz [Family 6 Model 45 Stepping 7]
1/19/2014 11:29:10 AM | | Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss htt tm pni ssse3 cx16 sse4_1 sse4_2 popcnt aes nx lm vmx tm2 dca pbe
1/19/2014 11:29:10 AM | | OS: Microsoft Windows 8.1: x64 Edition, (06.03.9600.00)
1/19/2014 11:29:10 AM | | Memory: 11.94 GB physical, 14.32 GB virtual
1/19/2014 11:29:10 AM | | Disk: 118.72 GB total, 97.15 GB free
1/19/2014 11:29:10 AM | | Local time is UTC -5 hours
1/19/2014 11:29:10 AM | SETI@home | URL http://setiathome.berkeley.edu/; Computer ID 7189954; resource share 100
1/19/2014 11:29:10 AM | SETI@home | General prefs: from SETI@home (last modified 15-Jan-2014 13:56:10)
1/19/2014 11:29:10 AM | SETI@home | Computer location: home
1/19/2014 11:29:10 AM | SETI@home | General prefs: no separate prefs for home; using your defaults
1/19/2014 11:29:10 AM | | Preferences:
1/19/2014 11:29:10 AM | | max memory usage when active: 6113.51MB
1/19/2014 11:29:10 AM | | max memory usage when idle: 11004.31MB
1/19/2014 11:29:10 AM | | max disk usage: 59.36GB
1/19/2014 11:29:10 AM | | (to change preferences, visit a project web site or select Preferences in the Manager)
1/19/2014 11:29:10 AM | | Not using a proxy
1/19/2014 11:29:13 AM | SETI@home | [http] HTTP_OP::init_get(): http://boinc2.ssl.berkeley.edu/sah/download_fanout/390/21oc13ac.26736.54158.438086664207.12.137
1/19/2014 11:29:13 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle 'C:\Program Files (x86)\BOINC\ca-bundle.crt'
1/19/2014 11:29:13 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle set
1/19/2014 11:29:13 AM | SETI@home | Started download of 21oc13ac.26736.54158.438086664207.12.137
1/19/2014 11:29:13 AM | SETI@home | [http] HTTP_OP::init_get(): http://boinc2.ssl.berkeley.edu/sah/download_fanout/26b/28mr08ai.26771.11933.438086664201.12.96
1/19/2014 11:29:13 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle 'C:\Program Files (x86)\BOINC\ca-bundle.crt'
1/19/2014 11:29:13 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle set
1/19/2014 11:29:13 AM | SETI@home | Started download of 28mr08ai.26771.11933.438086664201.12.96
1/19/2014 11:29:13 AM | | [http] HTTP_OP::init_get(): http://setiathome.berkeley.edu/notices.php?userid=77803&auth=77803_8fadee86540409dd65b3f2e69c3c307b
1/19/2014 11:29:13 AM | | [http] HTTP_OP::libcurl_exec(): ca-bundle 'C:\Program Files (x86)\BOINC\ca-bundle.crt'
1/19/2014 11:29:13 AM | | [http] HTTP_OP::libcurl_exec(): ca-bundle set
1/19/2014 11:29:13 AM | SETI@home | [http] [ID#2] Info: Could not resolve host: (nil); Host not found
1/19/2014 11:29:13 AM | SETI@home | [http] [ID#2] Info: Closing connection #0
1/19/2014 11:29:13 AM | SETI@home | [http] [ID#3] Info: Could not resolve host: (nil); Host not found
1/19/2014 11:29:13 AM | SETI@home | [http] [ID#3] Info: Closing connection #1
1/19/2014 11:29:13 AM | | [http] [ID#0] Info: Could not resolve host: (nil); Host not found
1/19/2014 11:29:13 AM | | [http] [ID#0] Info: Closing connection #2
1/19/2014 11:29:13 AM | SETI@home | [http] HTTP error: Couldn't resolve host name
1/19/2014 11:29:13 AM | SETI@home | [http] HTTP error: Couldn't resolve host name
1/19/2014 11:29:13 AM | | [http] HTTP error: Couldn't resolve host name
1/19/2014 11:29:14 AM | SETI@home | Temporarily failed download of 21oc13ac.26736.54158.438086664207.12.137: can't resolve hostname
1/19/2014 11:29:14 AM | SETI@home | Backing off 00:08:50 on download of 21oc13ac.26736.54158.438086664207.12.137
1/19/2014 11:29:14 AM | SETI@home | Temporarily failed download of 28mr08ai.26771.11933.438086664201.12.96: can't resolve hostname
1/19/2014 11:29:14 AM | SETI@home | Backing off 00:07:57 on download of 28mr08ai.26771.11933.438086664201.12.96
1/19/2014 11:29:14 AM | SETI@home | [http] HTTP_OP::init_get(): http://boinc2.ssl.berkeley.edu/sah/download_fanout/47/21oc13ac.26736.54158.438086664207.12.189
1/19/2014 11:29:14 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle 'C:\Program Files (x86)\BOINC\ca-bundle.crt'
1/19/2014 11:29:14 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle set
1/19/2014 11:29:14 AM | SETI@home | Started download of 21oc13ac.26736.54158.438086664207.12.189
1/19/2014 11:29:14 AM | SETI@home | [http] HTTP_OP::init_get(): http://boinc2.ssl.berkeley.edu/sah/download_fanout/32/28mr08ai.26771.11933.438086664201.12.100
1/19/2014 11:29:14 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle 'C:\Program Files (x86)\BOINC\ca-bundle.crt'
1/19/2014 11:29:14 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle set
1/19/2014 11:29:14 AM | SETI@home | Started download of 28mr08ai.26771.11933.438086664201.12.100
1/19/2014 11:29:15 AM | SETI@home | [http] [ID#7] Info: Could not resolve host: (nil); Host not found
1/19/2014 11:29:15 AM | SETI@home | [http] [ID#7] Info: Closing connection #0
1/19/2014 11:29:15 AM | SETI@home | [http] [ID#8] Info: Could not resolve host: (nil); Host not found
1/19/2014 11:29:15 AM | SETI@home | [http] [ID#8] Info: Closing connection #1
1/19/2014 11:29:15 AM | SETI@home | [http] HTTP error: Couldn't resolve host name
1/19/2014 11:29:15 AM | SETI@home | [http] HTTP error: Couldn't resolve host name
1/19/2014 11:29:15 AM | SETI@home | Temporarily failed download of 21oc13ac.26736.54158.438086664207.12.189: can't resolve hostname
1/19/2014 11:29:15 AM | SETI@home | Backing off 00:06:39 on download of 21oc13ac.26736.54158.438086664207.12.189
1/19/2014 11:29:15 AM | SETI@home | Temporarily failed download of 28mr08ai.26771.11933.438086664201.12.100: can't resolve hostname
1/19/2014 11:29:15 AM | SETI@home | Backing off 00:07:28 on download of 28mr08ai.26771.11933.438086664201.12.100
1/19/2014 11:29:15 AM | SETI@home | [http] HTTP_OP::init_get(): http://boinc2.ssl.berkeley.edu/sah/download_fanout/dd/28mr08ai.26771.11933.438086664201.12.104
1/19/2014 11:29:15 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle 'C:\Program Files (x86)\BOINC\ca-bundle.crt'
1/19/2014 11:29:15 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle set
1/19/2014 11:29:15 AM | SETI@home | Started download of 28mr08ai.26771.11933.438086664201.12.104
1/19/2014 11:29:15 AM | SETI@home | [http] HTTP_OP::init_get(): http://boinc2.ssl.berkeley.edu/sah/download_fanout/325/28mr08ai.26771.11933.438086664201.12.146
1/19/2014 11:29:15 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle 'C:\Program Files (x86)\BOINC\ca-bundle.crt'
1/19/2014 11:29:15 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle set
1/19/2014 11:29:15 AM | SETI@home | Started download of 28mr08ai.26771.11933.438086664201.12.146
1/19/2014 11:29:16 AM | SETI@home | [http] [ID#9] Info: Could not resolve host: (nil); Host not found
1/19/2014 11:29:16 AM | SETI@home | [http] [ID#9] Info: Closing connection #0
1/19/2014 11:29:16 AM | SETI@home | [http] [ID#10] Info: Could not resolve host: (nil); Host not found
1/19/2014 11:29:16 AM | SETI@home | [http] [ID#10] Info: Closing connection #1
1/19/2014 11:29:16 AM | SETI@home | [http] HTTP error: Couldn't resolve host name
1/19/2014 11:29:16 AM | SETI@home | [http] HTTP error: Couldn't resolve host name
1/19/2014 11:29:16 AM | SETI@home | Temporarily failed download of 28mr08ai.26771.11933.438086664201.12.104: can't resolve hostname
1/19/2014 11:29:16 AM | SETI@home | Backing off 00:03:56 on download of 28mr08ai.26771.11933.438086664201.12.104
1/19/2014 11:29:16 AM | SETI@home | Temporarily failed download of 28mr08ai.26771.11933.438086664201.12.146: can't resolve hostname
1/19/2014 11:29:16 AM | SETI@home | Backing off 00:03:29 on download of 28mr08ai.26771.11933.438086664201.12.146
1/19/2014 11:29:16 AM | SETI@home | [http] HTTP_OP::init_get(): http://boinc2.ssl.berkeley.edu/sah/download_fanout/d1/28mr08ai.26771.11933.438086664201.12.108
1/19/2014 11:29:16 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle 'C:\Program Files (x86)\BOINC\ca-bundle.crt'
1/19/2014 11:29:16 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle set
1/19/2014 11:29:16 AM | SETI@home | Started download of 28mr08ai.26771.11933.438086664201.12.108
1/19/2014 11:29:16 AM | SETI@home | [http] HTTP_OP::init_get(): http://boinc2.ssl.berkeley.edu/sah/download_fanout/1f7/28mr08ai.26771.11933.438086664201.12.153
1/19/2014 11:29:16 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle 'C:\Program Files (x86)\BOINC\ca-bundle.crt'
1/19/2014 11:29:16 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle set
1/19/2014 11:29:16 AM | SETI@home | Started download of 28mr08ai.26771.11933.438086664201.12.153
1/19/2014 11:29:17 AM | SETI@home | [http] [ID#11] Info: Could not resolve host: (nil); Host not found
1/19/2014 11:29:17 AM | SETI@home | [http] [ID#11] Info: Closing connection #0
1/19/2014 11:29:17 AM | SETI@home | [http] [ID#12] Info: Could not resolve host: (nil); Host not found
1/19/2014 11:29:17 AM | SETI@home | [http] [ID#12] Info: Closing connection #1
1/19/2014 11:29:17 AM | SETI@home | [http] HTTP error: Couldn't resolve host name
1/19/2014 11:29:17 AM | SETI@home | [http] HTTP error: Couldn't resolve host name
1/19/2014 11:29:17 AM | SETI@home | Temporarily failed download of 28mr08ai.26771.11933.438086664201.12.108: can't resolve hostname
1/19/2014 11:29:17 AM | SETI@home | Backing off 00:02:46 on download of 28mr08ai.26771.11933.438086664201.12.108
1/19/2014 11:29:17 AM | SETI@home | Temporarily failed download of 28mr08ai.26771.11933.438086664201.12.153: can't resolve hostname
1/19/2014 11:29:17 AM | SETI@home | Backing off 00:03:19 on download of 28mr08ai.26771.11933.438086664201.12.153
1/19/2014 11:29:17 AM | SETI@home | [http] HTTP_OP::init_get(): http://boinc2.ssl.berkeley.edu/sah/download_fanout/23b/21oc13ac.26736.54158.438086664207.12.240
1/19/2014 11:29:17 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle 'C:\Program Files (x86)\BOINC\ca-bundle.crt'
1/19/2014 11:29:17 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle set
1/19/2014 11:29:17 AM | SETI@home | Started download of 21oc13ac.26736.54158.438086664207.12.240
1/19/2014 11:29:17 AM | SETI@home | [http] HTTP_OP::init_get(): http://boinc2.ssl.berkeley.edu/sah/download_fanout/316/21oc13ac.26736.54158.438086664207.12.201
1/19/2014 11:29:17 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle 'C:\Program Files (x86)\BOINC\ca-bundle.crt'
1/19/2014 11:29:17 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle set
1/19/2014 11:29:17 AM | SETI@home | Started download of 21oc13ac.26736.54158.438086664207.12.201
1/19/2014 11:29:17 AM | SETI@home | [http] [ID#13] Info: About to connect() to boinc2.ssl.berkeley.edu port 80 (#0)
1/19/2014 11:29:17 AM | SETI@home | [http] [ID#13] Info: Trying 208.68.240.21...
1/19/2014 11:29:17 AM | SETI@home | [http] [ID#14] Info: About to connect() to boinc2.ssl.berkeley.edu port 80 (#1)
1/19/2014 11:29:17 AM | SETI@home | [http] [ID#14] Info: Trying 208.68.240.21...
1/19/2014 11:29:18 AM | SETI@home | [http] [ID#14] Info: Connected to boinc2.ssl.berkeley.edu (208.68.240.21) port 80 (#1)
1/19/2014 11:29:18 AM | SETI@home | [http] [ID#14] Info: Connected to boinc2.ssl.berkeley.edu (208.68.240.21) port 80 (#1)
1/19/2014 11:29:18 AM | SETI@home | [http] [ID#14] Sent header to server: GET /sah/download_fanout/316/21oc13ac.26736.54158.438086664207.12.201 HTTP/1.1
1/19/2014 11:29:18 AM | SETI@home | [http] [ID#14] Sent header to server: User-Agent: BOINC client (windows_x86_64 7.2.33)
1/19/2014 11:29:18 AM | SETI@home | [http] [ID#14] Sent header to server: Host: boinc2.ssl.berkeley.edu
1/19/2014 11:29:18 AM | SETI@home | [http] [ID#14] Sent header to server: Accept: */*
1/19/2014 11:29:18 AM | SETI@home | [http] [ID#14] Sent header to server: Accept-Encoding: deflate, gzip
1/19/2014 11:29:18 AM | SETI@home | [http] [ID#14] Sent header to server: Content-Type: application/x-www-form-urlencoded
1/19/2014 11:29:18 AM | SETI@home | [http] [ID#14] Sent header to server:
1/19/2014 11:29:18 AM | SETI@home | [http] [ID#14] Received header from server: HTTP/1.1 200 OK
1/19/2014 11:29:18 AM | SETI@home | [http] [ID#14] Received header from server: Server: nginx/1.0.15
1/19/2014 11:29:18 AM | SETI@home | [http] [ID#14] Received header from server: Date: Sun, 19 Jan 2014 16:29:19 GMT
1/19/2014 11:29:18 AM | SETI@home | [http] [ID#14] Received header from server: Content-Type: application/octet-stream
1/19/2014 11:29:18 AM | SETI@home | [http] [ID#14] Received header from server: Content-Length: 375724
1/19/2014 11:29:18 AM | SETI@home | [http] [ID#14] Received header from server: Last-Modified: Sun, 19 Jan 2014 02:41:14 GMT
1/19/2014 11:29:18 AM | SETI@home | [http] [ID#14] Received header from server: Connection: keep-alive
1/19/2014 11:29:18 AM | SETI@home | [http] [ID#14] Received header from server: Accept-Ranges: bytes
1/19/2014 11:29:18 AM | SETI@home | [http] [ID#14] Received header from server:
1/19/2014 11:29:18 AM | | [http_xfer] [ID#14] HTTP: wrote 2872 bytes
1/19/2014 11:29:19 AM | | [http_xfer] [ID#14] HTTP: wrote 1436 bytes
1/19/2014 11:29:19 AM | | [http_xfer] [ID#14] HTTP: wrote 10052 bytes
1/19/2014 11:29:19 AM | | [http_xfer] [ID#14] HTTP: wrote 2872 bytes
1/19/2014 11:29:19 AM | | [http_xfer] [ID#14] HTTP: wrote 2872 bytes
1/19/2014 11:29:19 AM | | [http_xfer] [ID#14] HTTP: wrote 8616 bytes
1/19/2014 11:29:19 AM | | [http_xfer] [ID#14] HTTP: wrote 1436 bytes
1/19/2014 11:29:19 AM | SETI@home | [http] [ID#13] Info: Connected to boinc2.ssl.berkeley.edu (208.68.240.21) port 80 (#0)
1/19/2014 11:29:19 AM | SETI@home | [http] [ID#13] Info: Connected to boinc2.ssl.berkeley.edu (208.68.240.21) port 80 (#0)
1/19/2014 11:29:19 AM | SETI@home | [http] [ID#13] Sent header to server: GET /sah/download_fanout/23b/21oc13ac.26736.54158.438086664207.12.240 HTTP/1.1
1/19/2014 11:29:19 AM | SETI@home | [http] [ID#13] Sent header to server: User-Agent: BOINC client (windows_x86_64 7.2.33)
1/19/2014 11:29:19 AM | SETI@home | [http] [ID#13] Sent header to server: Host: boinc2.ssl.berkeley.edu
1/19/2014 11:29:19 AM | SETI@home | [http] [ID#13] Sent header to server: Accept: */*
1/19/2014 11:29:19 AM | SETI@home | [http] [ID#13] Sent header to server: Accept-Encoding: deflate, gzip
1/19/2014 11:29:19 AM | SETI@home | [http] [ID#13] Sent header to server: Content-Type: application/x-www-form-urlencoded
1/19/2014 11:29:19 AM | SETI@home | [http] [ID#13] Sent header to server:
1/19/2014 11:29:19 AM | SETI@home | [http] [ID#13] Received header from server: HTTP/1.1 200 OK
1/19/2014 11:29:19 AM | SETI@home | [http] [ID#13] Received header from server: Server: nginx/1.0.15
1/19/2014 11:29:19 AM | SETI@home | [http] [ID#13] Received header from server: Date: Sun, 19 Jan 2014 16:29:20 GMT
1/19/2014 11:29:19 AM | SETI@home | [http] [ID#13] Received header from server: Content-Type: application/octet-stream
1/19/2014 11:29:19 AM | SETI@home | [http] [ID#13] Received header from server: Content-Length: 375716
1/19/2014 11:29:19 AM | SETI@home | [http] [ID#13] Received header from server: Last-Modified: Sun, 19 Jan 2014 02:41:16 GMT
1/19/2014 11:29:19 AM | SETI@home | [http] [ID#13] Received header from server: Connection: keep-alive
1/19/2014 11:29:19 AM | SETI@home | [http] [ID#13] Received header from server: Accept-Ranges: bytes
1/19/2014 11:29:19 AM | SETI@home | [http] [ID#13] Received header from server:
1/19/2014 11:29:20 AM | | [http_xfer] [ID#13] HTTP: wrote 1436 bytes
1/19/2014 11:29:20 AM | | [http_xfer] [ID#13] HTTP: wrote 1436 bytes
1/19/2014 11:29:20 AM | | [http_xfer] [ID#13] HTTP: wrote 1436 bytes
1/19/2014 11:29:20 AM | | [http_xfer] [ID#13] HTTP: wrote 1436 bytes
1/19/2014 11:29:20 AM | | [http_xfer] [ID#13] HTTP: wrote 1436 bytes
1/19/2014 11:29:20 AM | | [http_xfer] [ID#13] HTTP: wrote 1436 bytes
1/19/2014 11:29:20 AM | | [http_xfer] [ID#13] HTTP: wrote 1436 bytes
1/19/2014 11:29:20 AM | | [http_xfer] [ID#13] HTTP: wrote 1436 bytes
1/19/2014 11:29:20 AM | | [http_xfer] [ID#13] HTTP: wrote 1436 bytes
1/19/2014 11:29:20 AM | | [http_xfer] [ID#13] HTTP: wrote 1436 bytes
1/19/2014 11:29:20 AM | | [http_xfer] [ID#13] HTTP: wrote 1436 bytes
1/19/2014 11:29:20 AM | | [http_xfer] [ID#13] HTTP: wrote 1436 bytes
1/19/2014 11:29:20 AM | | [http_xfer] [ID#13] HTTP: wrote 1436 bytes
1/19/2014 11:29:20 AM | | [http_xfer] [ID#13] HTTP: wrote 1436 bytes
1/19/2014 11:29:20 AM | | [http_xfer] [ID#13] HTTP: wrote 1436 bytes
1/19/2014 11:29:20 AM | | [http_xfer] [ID#13] HTTP: wrote 2872 bytes
1/19/2014 11:29:22 AM | | [http_xfer] [ID#13] HTTP: wrote 1436 bytes
1/19/2014 11:29:40 AM | | Project communication failed: attempting access to reference site
1/19/2014 11:29:40 AM | | [http] HTTP_OP::init_get(): http://www.google.com/
1/19/2014 11:29:40 AM | | [http] HTTP_OP::libcurl_exec(): ca-bundle set
1/19/2014 11:29:40 AM | | [http] [ID#0] Info: About to connect() to www.google.com port 80 (#2)
1/19/2014 11:29:40 AM | | [http] [ID#0] Info: Trying 74.125.226.211...
1/19/2014 11:29:41 AM | | [http] [ID#0] Info: Connected to www.google.com (74.125.226.211) port 80 (#2)
1/19/2014 11:29:41 AM | | [http] [ID#0] Info: Connected to www.google.com (74.125.226.211) port 80 (#2)
1/19/2014 11:29:41 AM | | [http] [ID#0] Sent header to server: GET / HTTP/1.1
1/19/2014 11:29:41 AM | | [http] [ID#0] Sent header to server: User-Agent: BOINC client (windows_x86_64 7.2.33)
1/19/2014 11:29:41 AM | | [http] [ID#0] Sent header to server: Host: www.google.com
1/19/2014 11:29:41 AM | | [http] [ID#0] Sent header to server: Accept: */*
1/19/2014 11:29:41 AM | | [http] [ID#0] Sent header to server: Accept-Encoding: deflate, gzip
1/19/2014 11:29:41 AM | | [http] [ID#0] Sent header to server: Content-Type: application/x-www-form-urlencoded
1/19/2014 11:29:41 AM | | [http] [ID#0] Sent header to server:
1/19/2014 11:29:41 AM | | [http] [ID#0] Received header from server: HTTP/1.1 200 OK
1/19/2014 11:29:41 AM | | [http] [ID#0] Received header from server: Date: Sun, 19 Jan 2014 16:29:42 GMT
1/19/2014 11:29:41 AM | | [http] [ID#0] Received header from server: Expires: -1
1/19/2014 11:29:41 AM | | [http] [ID#0] Received header from server: Cache-Control: private, max-age=0
1/19/2014 11:29:41 AM | | [http] [ID#0] Received header from server: Content-Type: text/html; charset=ISO-8859-1
1/19/2014 11:29:41 AM | | [http] [ID#0] Received header from server: Set-Cookie: PREF=ID=1f14b463d7774756:FF=0:TM=1390148982:LM=1390148982:S=66g1iqY3iPGsYyPg; expires=Tue, 19-Jan-2016 16:29:42 GMT; path=/; domain=.google.com
1/19/2014 11:29:41 AM | | [http] [ID#0] Received header from server: Set-Cookie: NID=67=a1fMK4wt8ArgnaCjoC45HBpuY2WxCsEEqFQf3JADx9394jJDtLg639CdzndZMom7KyLlFeZ5_i0yhAdVg24wCs8zRIE8KukyymGDrqcr7UTd_38oU3F5Q4tTelz7I4xe; expires=Mon, 21-Jul-2014 16:29:42 GMT; path=/; domain=.google.com; HttpOnly
1/19/2014 11:29:41 AM | | [http] [ID#0] Received header from server: P3P: CP="This is not a P3P policy! See http://www.google.com/support/accounts/bin/answer.py?hl=en&answer=151657 for more info."
1/19/2014 11:29:41 AM | | [http] [ID#0] Received header from server: Server: gws
1/19/2014 11:29:41 AM | | [http] [ID#0] Received header from server: X-XSS-Protection: 1; mode=block
1/19/2014 11:29:41 AM | | [http] [ID#0] Received header from server: X-Frame-Options: SAMEORIGIN
1/19/2014 11:29:41 AM | | [http] [ID#0] Received header from server: Alternate-Protocol: 80:quic
1/19/2014 11:29:41 AM | | [http] [ID#0] Received header from server: Transfer-Encoding: chunked
1/19/2014 11:29:41 AM | | [http] [ID#0] Received header from server:
1/19/2014 11:29:41 AM | | [http_xfer] [ID#0] HTTP: wrote 10641 bytes
1/19/2014 11:29:42 AM | | [http_xfer] [ID#0] HTTP: wrote 262 bytes
1/19/2014 11:29:42 AM | | [http] [ID#0] Info: Connection #2 to host www.google.com left intact
1/19/2014 11:29:42 AM | | Internet access OK - project servers may be temporarily down.
1/19/2014 11:31:19 AM | SETI@home | update requested by user
1/19/2014 11:31:20 AM | | [http] HTTP_OP::init_get(): http://setiathome.berkeley.edu/notices.php?userid=77803&auth=77803_8fadee86540409dd65b3f2e69c3c307b
1/19/2014 11:31:20 AM | | [http] HTTP_OP::libcurl_exec(): ca-bundle set
1/19/2014 11:31:20 AM | | [http] [ID#0] Info: About to connect() to setiathome.berkeley.edu port 80 (#3)
1/19/2014 11:31:20 AM | | [http] [ID#0] Info: Trying 169.229.217.150...
1/19/2014 11:31:21 AM | | [http] [ID#0] Info: Connected to setiathome.berkeley.edu (169.229.217.150) port 80 (#3)
1/19/2014 11:31:21 AM | | [http] [ID#0] Info: Connected to setiathome.berkeley.edu (169.229.217.150) port 80 (#3)
1/19/2014 11:31:21 AM | | [http] [ID#0] Sent header to server: GET /notices.php?userid=77803&auth=77803_8fadee86540409dd65b3f2e69c3c307b HTTP/1.1
1/19/2014 11:31:21 AM | | [http] [ID#0] Sent header to server: User-Agent: BOINC client (windows_x86_64 7.2.33)
1/19/2014 11:31:21 AM | | [http] [ID#0] Sent header to server: Host: setiathome.berkeley.edu
1/19/2014 11:31:21 AM | | [http] [ID#0] Sent header to server: Accept: */*
1/19/2014 11:31:21 AM | | [http] [ID#0] Sent header to server: Accept-Encoding: deflate, gzip
1/19/2014 11:31:21 AM | | [http] [ID#0] Sent header to server: Content-Type: application/x-www-form-urlencoded
1/19/2014 11:31:21 AM | | [http] [ID#0] Sent header to server:
1/19/2014 11:31:22 AM | | [http] [ID#0] Received header from server: HTTP/1.1 200 OK
1/19/2014 11:31:22 AM | | [http] [ID#0] Received header from server: Date: Sun, 19 Jan 2014 16:31:22 GMT
1/19/2014 11:31:22 AM | | [http] [ID#0] Received header from server: Server: Apache/2.2.15 (Scientific Linux)
1/19/2014 11:31:22 AM | | [http] [ID#0] Received header from server: X-Powered-By: PHP/5.3.3
1/19/2014 11:31:22 AM | | [http] [ID#0] Received header from server: Expires: Sun, 19 Jan 2014 16:31:22 GMT
1/19/2014 11:31:22 AM | | [http] [ID#0] Received header from server: Last-Modified: Sun, 19 Jan 2014 16:31:22 GMT
1/19/2014 11:31:22 AM | | [http] [ID#0] Received header from server: Content-Length: 1132
1/19/2014 11:31:22 AM | | [http] [ID#0] Received header from server: Connection: close
1/19/2014 11:31:22 AM | | [http] [ID#0] Received header from server: Content-Type: application/xml
1/19/2014 11:31:22 AM | | [http] [ID#0] Received header from server:
1/19/2014 11:31:22 AM | | [http_xfer] [ID#0] HTTP: wrote 1132 bytes
1/19/2014 11:31:22 AM | | [http] [ID#0] Info: Closing connection #3
1/19/2014 11:31:23 AM | SETI@home | Sending scheduler request: Requested by user.
1/19/2014 11:31:23 AM | SETI@home | Not requesting tasks: some download is stalled
1/19/2014 11:31:23 AM | SETI@home | [http] HTTP_OP::init_post(): http://setiboinc.ssl.berkeley.edu/sah_cgi/cgi
1/19/2014 11:31:23 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle 'C:\Program Files (x86)\BOINC\ca-bundle.crt'
1/19/2014 11:31:23 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle set
1/19/2014 11:31:27 AM | SETI@home | [http] [ID#1] Info: About to connect() to setiboinc.ssl.berkeley.edu port 80 (#3)
1/19/2014 11:31:27 AM | SETI@home | [http] [ID#1] Info: Trying 208.68.240.20...
1/19/2014 11:31:28 AM | SETI@home | [http] [ID#1] Info: Connected to setiboinc.ssl.berkeley.edu (208.68.240.20) port 80 (#3)
1/19/2014 11:31:28 AM | SETI@home | [http] [ID#1] Info: Connected to setiboinc.ssl.berkeley.edu (208.68.240.20) port 80 (#3)
1/19/2014 11:31:28 AM | SETI@home | [http] [ID#1] Sent header to server: POST /sah_cgi/cgi HTTP/1.1
1/19/2014 11:31:28 AM | SETI@home | [http] [ID#1] Sent header to server: User-Agent: BOINC client (windows_x86_64 7.2.33)
1/19/2014 11:31:28 AM | SETI@home | [http] [ID#1] Sent header to server: Host: setiboinc.ssl.berkeley.edu
1/19/2014 11:31:28 AM | SETI@home | [http] [ID#1] Sent header to server: Accept: */*
1/19/2014 11:31:28 AM | SETI@home | [http] [ID#1] Sent header to server: Accept-Encoding: deflate, gzip
1/19/2014 11:31:28 AM | SETI@home | [http] [ID#1] Sent header to server: Content-Type: application/x-www-form-urlencoded
1/19/2014 11:31:28 AM | SETI@home | [http] [ID#1] Sent header to server: Content-Length: 27948
1/19/2014 11:31:28 AM | SETI@home | [http] [ID#1] Sent header to server: Expect: 100-continue
1/19/2014 11:31:28 AM | SETI@home | [http] [ID#1] Sent header to server:
1/19/2014 11:31:29 AM | SETI@home | [http] [ID#1] Received header from server: HTTP/1.1 100 Continue
1/19/2014 11:31:30 AM | SETI@home | [http] [ID#1] Received header from server: HTTP/1.1 200 OK
1/19/2014 11:31:30 AM | SETI@home | [http] [ID#1] Received header from server: Date: Sun, 19 Jan 2014 16:31:29 GMT
1/19/2014 11:31:30 AM | SETI@home | [http] [ID#1] Received header from server: Server: Apache/2.2.15 (Scientific Linux)
1/19/2014 11:31:30 AM | SETI@home | [http] [ID#1] Received header from server: Connection: close
1/19/2014 11:31:30 AM | SETI@home | [http] [ID#1] Received header from server: Transfer-Encoding: chunked
1/19/2014 11:31:30 AM | SETI@home | [http] [ID#1] Received header from server: Content-Type: text/xml
1/19/2014 11:31:30 AM | SETI@home | [http] [ID#1] Received header from server:
1/19/2014 11:31:30 AM | | [http_xfer] [ID#1] HTTP: wrote 1261 bytes
1/19/2014 11:31:30 AM | | [http_xfer] [ID#1] HTTP: wrote 1436 bytes
1/19/2014 11:31:30 AM | | [http_xfer] [ID#1] HTTP: wrote 1436 bytes
1/19/2014 11:31:30 AM | | [http_xfer] [ID#1] HTTP: wrote 1047 bytes
1/19/2014 11:31:30 AM | SETI@home | [http] [ID#1] Info: Closing connection #3
1/19/2014 11:31:30 AM | SETI@home | Scheduler request completed
1/19/2014 11:34:24 AM | SETI@home | [http] [ID#14] Info: Operation too slow. Less than 10 bytes/sec transferred the last 300 seconds
1/19/2014 11:34:24 AM | SETI@home | [http] [ID#14] Info: Closing connection #1
1/19/2014 11:34:24 AM | SETI@home | [http] HTTP error: Timeout was reached
1/19/2014 11:34:25 AM | SETI@home | Temporarily failed download of 21oc13ac.26736.54158.438086664207.12.201: transient HTTP error
1/19/2014 11:34:25 AM | SETI@home | Backing off 00:02:19 on download of 21oc13ac.26736.54158.438086664207.12.201
1/19/2014 11:34:25 AM | SETI@home | [http] HTTP_OP::init_get(): http://boinc2.ssl.berkeley.edu/sah/download_fanout/c0/28mr08ai.26771.11933.438086664201.12.169
1/19/2014 11:34:25 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle 'C:\Program Files (x86)\BOINC\ca-bundle.crt'
1/19/2014 11:34:25 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle set
1/19/2014 11:34:25 AM | SETI@home | Started download of 28mr08ai.26771.11933.438086664201.12.169
1/19/2014 11:34:25 AM | SETI@home | [http] [ID#15] Info: Connection #2 seems to be dead!
1/19/2014 11:34:25 AM | SETI@home | [http] [ID#15] Info: Closing connection #2
1/19/2014 11:34:26 AM | | Project communication failed: attempting access to reference site
1/19/2014 11:34:26 AM | | [http] HTTP_OP::init_get(): http://www.google.com/
1/19/2014 11:34:26 AM | | [http] HTTP_OP::libcurl_exec(): ca-bundle set
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#15] Info: About to connect() to boinc2.ssl.berkeley.edu port 80 (#1)
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#15] Info: Trying 208.68.240.21...
1/19/2014 11:34:27 AM | | [http] [ID#0] Info: About to connect() to www.google.com port 80 (#2)
1/19/2014 11:34:27 AM | | [http] [ID#0] Info: Trying 173.194.43.50...
1/19/2014 11:34:27 AM | | [http] [ID#0] Info: Connected to www.google.com (173.194.43.50) port 80 (#2)
1/19/2014 11:34:27 AM | | [http] [ID#0] Info: Connected to www.google.com (173.194.43.50) port 80 (#2)
1/19/2014 11:34:27 AM | | [http] [ID#0] Sent header to server: GET / HTTP/1.1
1/19/2014 11:34:27 AM | | [http] [ID#0] Sent header to server: User-Agent: BOINC client (windows_x86_64 7.2.33)
1/19/2014 11:34:27 AM | | [http] [ID#0] Sent header to server: Host: www.google.com
1/19/2014 11:34:27 AM | | [http] [ID#0] Sent header to server: Accept: */*
1/19/2014 11:34:27 AM | | [http] [ID#0] Sent header to server: Accept-Encoding: deflate, gzip
1/19/2014 11:34:27 AM | | [http] [ID#0] Sent header to server: Content-Type: application/x-www-form-urlencoded
1/19/2014 11:34:27 AM | | [http] [ID#0] Sent header to server:
1/19/2014 11:34:27 AM | | [http] [ID#0] Received header from server: HTTP/1.1 200 OK
1/19/2014 11:34:27 AM | | [http] [ID#0] Received header from server: Date: Sun, 19 Jan 2014 16:34:27 GMT
1/19/2014 11:34:27 AM | | [http] [ID#0] Received header from server: Expires: -1
1/19/2014 11:34:27 AM | | [http] [ID#0] Received header from server: Cache-Control: private, max-age=0
1/19/2014 11:34:27 AM | | [http] [ID#0] Received header from server: Content-Type: text/html; charset=ISO-8859-1
1/19/2014 11:34:27 AM | | [http] [ID#0] Received header from server: Set-Cookie: PREF=ID=5456557ee2b362d9:FF=0:TM=1390149267:LM=1390149267:S=0UcvDKkUVYVVAJDU; expires=Tue, 19-Jan-2016 16:34:27 GMT; path=/; domain=.google.com
1/19/2014 11:34:27 AM | | [http] [ID#0] Received header from server: Set-Cookie: NID=67=f4aTxeN9-FRNUH6Hi7QAmwN876T3NBQ6r9O1p_yleidiX0O8hOXnIh3Jk46T_yl6O4sjqiqEXyY0M1S6IK1hVlS405pCy4IEv0LhBiqQM6HqJ_2la6orbNNOLv4aiRzv; expires=Mon, 21-Jul-2014 16:34:27 GMT; path=/; domain=.google.com; HttpOnly
1/19/2014 11:34:27 AM | | [http] [ID#0] Received header from server: P3P: CP="This is not a P3P policy! See http://www.google.com/support/accounts/bin/answer.py?hl=en&answer=151657 for more info."
1/19/2014 11:34:27 AM | | [http] [ID#0] Received header from server: Server: gws
1/19/2014 11:34:27 AM | | [http] [ID#0] Received header from server: X-XSS-Protection: 1; mode=block
1/19/2014 11:34:27 AM | | [http] [ID#0] Received header from server: X-Frame-Options: SAMEORIGIN
1/19/2014 11:34:27 AM | | [http] [ID#0] Received header from server: Alternate-Protocol: 80:quic
1/19/2014 11:34:27 AM | | [http] [ID#0] Received header from server: Transfer-Encoding: chunked
1/19/2014 11:34:27 AM | | [http] [ID#0] Received header from server:
1/19/2014 11:34:27 AM | | [http_xfer] [ID#0] HTTP: wrote 631 bytes
1/19/2014 11:34:27 AM | | [http_xfer] [ID#0] HTTP: wrote 1430 bytes
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#15] Info: Connected to boinc2.ssl.berkeley.edu (208.68.240.21) port 80 (#1)
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#15] Info: Connected to boinc2.ssl.berkeley.edu (208.68.240.21) port 80 (#1)
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#15] Sent header to server: GET /sah/download_fanout/c0/28mr08ai.26771.11933.438086664201.12.169 HTTP/1.1
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#15] Sent header to server: User-Agent: BOINC client (windows_x86_64 7.2.33)
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#15] Sent header to server: Host: boinc2.ssl.berkeley.edu
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#15] Sent header to server: Accept: */*
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#15] Sent header to server: Accept-Encoding: deflate, gzip
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#15] Sent header to server: Content-Type: application/x-www-form-urlencoded
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#15] Sent header to server:
1/19/2014 11:34:27 AM | | [http_xfer] [ID#0] HTTP: wrote 5720 bytes
1/19/2014 11:34:27 AM | | [http_xfer] [ID#0] HTTP: wrote 3138 bytes
1/19/2014 11:34:27 AM | | [http] [ID#0] Info: Connection #2 to host www.google.com left intact
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#15] Received header from server: HTTP/1.1 200 OK
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#15] Received header from server: Server: nginx/1.0.15
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#15] Received header from server: Date: Sun, 19 Jan 2014 16:34:28 GMT
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#15] Received header from server: Content-Type: application/octet-stream
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#15] Received header from server: Content-Length: 375717
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#15] Received header from server: Last-Modified: Sun, 19 Jan 2014 02:41:16 GMT
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#15] Received header from server: Connection: keep-alive
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#15] Received header from server: Accept-Ranges: bytes
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#15] Received header from server:
1/19/2014 11:34:27 AM | | [http_xfer] [ID#15] HTTP: wrote 1436 bytes
1/19/2014 11:34:27 AM | | [http_xfer] [ID#15] HTTP: wrote 1436 bytes
1/19/2014 11:34:27 AM | | [http_xfer] [ID#15] HTTP: wrote 1436 bytes
1/19/2014 11:34:27 AM | | [http_xfer] [ID#15] HTTP: wrote 1436 bytes
1/19/2014 11:34:27 AM | | [http_xfer] [ID#15] HTTP: wrote 1436 bytes
1/19/2014 11:34:27 AM | | [http_xfer] [ID#15] HTTP: wrote 1436 bytes
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#13] Info: Operation too slow. Less than 10 bytes/sec transferred the last 300 seconds
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#13] Info: Closing connection #0
1/19/2014 11:34:27 AM | | [http_xfer] [ID#15] HTTP: wrote 8616 bytes
1/19/2014 11:34:27 AM | SETI@home | [http] HTTP error: Timeout was reached
1/19/2014 11:34:28 AM | | [http_xfer] [ID#15] HTTP: wrote 2872 bytes
1/19/2014 11:34:28 AM | | Internet access OK - project servers may be temporarily down.
1/19/2014 11:34:28 AM | SETI@home | Temporarily failed download of 21oc13ac.26736.54158.438086664207.12.240: transient HTTP error
1/19/2014 11:34:28 AM | SETI@home | Backing off 00:02:22 on download of 21oc13ac.26736.54158.438086664207.12.240
1/19/2014 11:34:28 AM | SETI@home | [http] HTTP_OP::init_get(): http://boinc2.ssl.berkeley.edu/sah/download_fanout/73/28mr08ai.26771.11933.438086664201.12.184
1/19/2014 11:34:28 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle 'C:\Program Files (x86)\BOINC\ca-bundle.crt'
1/19/2014 11:34:28 AM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle set
1/19/2014 11:34:28 AM | SETI@home | Started download of 28mr08ai.26771.11933.438086664201.12.184
1/19/2014 11:34:28 AM | SETI@home | [http] [ID#16] Info: About to connect() to boinc2.ssl.berkeley.edu port 80 (#0)
1/19/2014 11:34:28 AM | SETI@home | [http] [ID#16] Info: Trying 208.68.240.21...
1/19/2014 11:34:29 AM | SETI@home | [http] [ID#16] Info: Connected to boinc2.ssl.berkeley.edu (208.68.240.21) port 80 (#0)
1/19/2014 11:34:29 AM | SETI@home | [http] [ID#16] Info: Connected to boinc2.ssl.berkeley.edu (208.68.240.21) port 80 (#0)
1/19/2014 11:34:29 AM | SETI@home | [http] [ID#16] Sent header to server: GET /sah/download_fanout/73/28mr08ai.26771.11933.438086664201.12.184 HTTP/1.1
1/19/2014 11:34:29 AM | SETI@home | [http] [ID#16] Sent header to server: User-Agent: BOINC client (windows_x86_64 7.2.33)
1/19/2014 11:34:29 AM | SETI@home | [http] [ID#16] Sent header to server: Host: boinc2.ssl.berkeley.edu
1/19/2014 11:34:29 AM | SETI@home | [http] [ID#16] Sent header to server: Accept: */*
1/19/2014 11:34:29 AM | SETI@home | [http] [ID#16] Sent header to server: Accept-Encoding: deflate, gzip
1/19/2014 11:34:29 AM | SETI@home | [http] [ID#16] Sent header to server: Content-Type: application/x-www-form-urlencoded
1/19/2014 11:34:29 AM | SETI@home | [http] [ID#16] Sent header to server:
1/19/2014 11:34:29 AM | SETI@home | [http] [ID#16] Received header from server: HTTP/1.1 200 OK
1/19/2014 11:34:29 AM | SETI@home | [http] [ID#16] Received header from server: Server: nginx/1.0.15
1/19/2014 11:34:29 AM | SETI@home | [http] [ID#16] Received header from server: Date: Sun, 19 Jan 2014 16:34:29 GMT
1/19/2014 11:34:29 AM | SETI@home | [http] [ID#16] Received header from server: Content-Type: application/octet-stream
1/19/2014 11:34:29 AM | SETI@home | [http] [ID#16] Received header from server: Content-Length: 375709
1/19/2014 11:34:29 AM | SETI@home | [http] [ID#16] Received header from server: Last-Modified: Sun, 19 Jan 2014 02:41:17 GMT
1/19/2014 11:34:29 AM | SETI@home | [http] [ID#16] Received header from server: Connection: keep-alive
1/19/2014 11:34:29 AM | SETI@home | [http] [ID#16] Received header from server: Accept-Ranges: bytes
1/19/2014 11:34:29 AM | SETI@home | [http] [ID#16] Received header from server:
1/19/2014 11:34:29 AM | | [http_xfer] [ID#16] HTTP: wrote 11488 bytes
1/19/2014 11:34:29 AM | | [http_xfer] [ID#16] HTTP: wrote 1436 bytes
1/19/2014 11:34:29 AM | | [http_xfer] [ID#16] HTTP: wrote 2872 bytes
1/19/2014 11:34:29 AM | | [http_xfer] [ID#16] HTTP: wrote 1436 bytes
1/19/2014 11:34:29 AM | | [http_xfer] [ID#16] HTTP: wrote 1436 bytes
1/19/2014 11:34:30 AM | | [http_xfer] [ID#16] HTTP: wrote 4308 bytes
____________

msattler
Volunteer tester
Avatar
Send message
Joined: 9 Jul 00
Posts: 37503
Credit: 503,107,073
RAC: 566,151
United States
Message 1466284 - Posted: 19 Jan 2014, 16:47:09 UTC

'Couldn't resolve host name' is a network connection problem on your end, I believe.
I get that when my router throws a wobbly and my XP rigs can't get reconnected to it without rebooting them.
____________
******************
Just a kittyman kinda guy.

Crunching Seti, loving all of God's kitties.

I have met a few friends in my life.
Most were cats.

Richard Haselgrove
Volunteer tester
Send message
Joined: 4 Jul 99
Posts: 8278
Credit: 45,030,089
RAC: 13,649
United Kingdom
Message 1466288 - Posted: 19 Jan 2014, 17:04:06 UTC - in response to Message 1466281.
Last modified: 19 Jan 2014, 17:25:21 UTC

All looks normal, except those early DNS lookup failures:

1/19/2014 11:29:13 AM | SETI@home | [http] HTTP_OP::init_get(): http://boinc2.ssl.berkeley.edu/sah/download_fanout/390/21oc13ac.26736.54158.438086664207.12.137
1/19/2014 11:29:13 AM | SETI@home | Started download of 21oc13ac.26736.54158.438086664207.12.137
1/19/2014 11:29:13 AM | SETI@home | [http] [ID#2] Info: Could not resolve host: (nil); Host not found
1/19/2014 11:29:13 AM | SETI@home | [http] [ID#2] Info: Closing connection #0

Later on, the same thing worked properly:

1/19/2014 11:29:17 AM | SETI@home | [http] HTTP_OP::init_get(): http://boinc2.ssl.berkeley.edu/sah/download_fanout/23b/21oc13ac.26736.54158.438086664207.12.240
1/19/2014 11:29:17 AM | SETI@home | Started download of 21oc13ac.26736.54158.438086664207.12.240
1/19/2014 11:29:17 AM | SETI@home | [http] [ID#13] Info: About to connect() to boinc2.ssl.berkeley.edu port 80 (#0)
1/19/2014 11:29:17 AM | SETI@home | [http] [ID#13] Info: Trying 208.68.240.21...
1/19/2014 11:29:19 AM | SETI@home | [http] [ID#13] Info: Connected to boinc2.ssl.berkeley.edu (208.68.240.21) port 80 (#0)

DNS found the notice server (this web server) OK at the second attempt:

1/19/2014 11:29:13 AM | | [http] HTTP_OP::init_get(): http://setiathome.berkeley.edu/notices.php?userid=77803&auth=77803_8fadee86540409dd65b3f2e69c3c307b
1/19/2014 11:29:13 AM | | [http] HTTP error: Couldn't resolve host name
...
1/19/2014 11:31:20 AM | | [http] HTTP_OP::init_get(): http://setiathome.berkeley.edu/notices.php?userid=77803&auth=[redacted]
1/19/2014 11:31:20 AM | | [http] [ID#0] Info: About to connect() to setiathome.berkeley.edu port 80 (#3)
1/19/2014 11:31:20 AM | | [http] [ID#0] Info: Trying 169.229.217.150...

and likewise the scheduler:

1/19/2014 11:31:23 AM | SETI@home | Sending scheduler request: Requested by user.
1/19/2014 11:31:23 AM | SETI@home | [http] HTTP_OP::init_post(): http://setiboinc.ssl.berkeley.edu/sah_cgi/cgi
1/19/2014 11:31:27 AM | SETI@home | [http] [ID#1] Info: About to connect() to setiboinc.ssl.berkeley.edu port 80 (#3)
1/19/2014 11:31:27 AM | SETI@home | [http] [ID#1] Info: Trying 208.68.240.20...

But then, the first download connection hit a snag:

1/19/2014 11:29:22 AM | | [http_xfer] [ID#13] HTTP: wrote 1436 bytes
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#13] Info: Operation too slow. Less than 10 bytes/sec transferred the last 300 seconds
1/19/2014 11:34:27 AM | SETI@home | [http] [ID#13] Info: Closing connection #0

(note the five minute pause). You definitely have networking problems: when you re-installed the operating system, are you sure you loaded the right network card driver?

Batter Up
Avatar
Send message
Joined: 5 May 99
Posts: 509
Credit: 24,826,615
RAC: 22,650
United States
Message 1466300 - Posted: 19 Jan 2014, 17:31:34 UTC

Everything works except SETI download. My machine shows it contacted the server and the server also shows it was contacted. This is the same thing I was getting before I formatted C. I can reset the project and the server complies showing 0 WU in progress. Then when I update I get a bunch of downloads but the first one dies after a few bites and the server shows 100 WUs in progress.

The downloads got suck when I suspended some tasks on the old HD but now everything is new but something is stuck
____________

Profile Sirius B
Volunteer tester
Avatar
Send message
Joined: 26 Dec 00
Posts: 9329
Credit: 1,391,715
RAC: 3,124
United Kingdom
Message 1466303 - Posted: 19 Jan 2014, 17:38:50 UTC

I had similar problems after deleting Win 7 Beta/RC and reformatting/installing win 7.

Win 7 detected the network card and assigned 192.168.1.2 to that host which conflicted with another host with the same IP address.

I eventually got around the networking issues by assigning all hosts on my network static IP addresses and reserving them via the routers DHCP. This was made easy due to the individual host names.

On doing a fresh install of my main workstation, it was assigned .1.15 which I knew was my network printer, so reassigned to the same static address as previously.

On reinstalling boinc, got sent all the lost tasks.

I see you're using Win 8.1. Is it possible that the O/S is assigning IP address automatically with your router also acting as a DHCP server?
____________

juan BFB
Volunteer tester
Avatar
Send message
Joined: 16 Mar 07
Posts: 4623
Credit: 235,486,581
RAC: 363,424
Brazil
Message 1466304 - Posted: 19 Jan 2014, 17:44:02 UTC
Last modified: 19 Jan 2014, 18:00:35 UTC

Three "maybe stupid" "or" sugestions:

1 - ipconfig /flushdns

2 - Look if something corrupt or add the wrong adress to the file hosts.txt

C:\Windows\System32\drivers\etc - file location on Windows 7 for example

3 - Disable your AV/Firewall and try

My guess, your hosts goes to the wrong place when try to comunicate with the SETI servers, in theory the #1 or 2 could correct that.

Of course, i assume your host has the right ethernet driver and a unique IP in you network, if not fix that first.
____________

Richard Haselgrove
Volunteer tester
Send message
Joined: 4 Jul 99
Posts: 8278
Credit: 45,030,089
RAC: 13,649
United Kingdom
Message 1466323 - Posted: 19 Jan 2014, 18:20:08 UTC - in response to Message 1466303.

I had similar problems after deleting Win 7 Beta/RC and reformatting/installing win 7.

Win 7 detected the network card and assigned 192.168.1.2 to that host which conflicted with another host with the same IP address.

I eventually got around the networking issues by assigning all hosts on my network static IP addresses and reserving them via the routers DHCP. This was made easy due to the individual host names.

On doing a fresh install of my main workstation, it was assigned .1.15 which I knew was my network printer, so reassigned to the same static address as previously.

On reinstalling boinc, got sent all the lost tasks.

I see you're using Win 8.1. Is it possible that the O/S is assigning IP address automatically with your router also acting as a DHCP server?

If Windows is assigning IPv4 addresses automatically, it will be choosing them from the 169.254.0.0/16 Link-local subnet as endorsed by RFC 3927 - see Wikipedia IPv4.

Addresses in the 192.168.0.0 class C private network range will have been assigned by some other DHCP server. I expect (and configure) my router to perform that role - not having a dedicated server at the moment - but I find that too many other devices want to take the role too, even a humble one-disk network backup drive. You need to be careful that there is precisely one DHCP server active per local subnet, otherwise things like that happen.

ipconfig /all

will give you the IP address of the DHCP server that gave your network adapter the unexpected class C private address - then you just have to work out what device answers to that address.

Batter Up
Avatar
Send message
Joined: 5 May 99
Posts: 509
Credit: 24,826,615
RAC: 22,650
United States
Message 1466361 - Posted: 19 Jan 2014, 19:32:04 UTC

I thank all of you for the replays. The problem is with my LAN IP; why it only affects SETI and why in the middle of a download is a question for another time.
____________

Profile Guy
Volunteer moderator
Send message
Joined: 3 Apr 99
Posts: 1987
Credit: 30,396,814
RAC: 159,902
United States
Message 1466412 - Posted: 19 Jan 2014, 21:54:20 UTC
Last modified: 21 Mar 2014, 23:34:43 UTC

--

1 · 2 · Next

Message boards : Number crunching : Downloads stuck.

Copyright © 2014 University of California