Message boards :
Number crunching :
Crunching / Gaming Computer Build 2010
Message board moderation
Previous · 1 . . . 4 · 5 · 6 · 7 · 8 · 9 · 10 . . . 21 · Next
Author | Message |
---|---|
Smariga Send message Joined: 13 Jun 99 Posts: 49 Credit: 30,454,070 RAC: 0 |
Luke, Just finished a build of similar machine. Using the i7-860 and EGA P55 mobo,ith an EVGA GTX 275, tho. I'm hoping to get RAC time around 15k but so far am only at 8000. I have the mobo oc'd at 20% and the 275 oc'd at 8%. Am having stability problems above that. Particularly the GTX 275. If I push it too hard, it faults and drops down to only 50% of normal. Think it may be a Win 7 issue. Won't come back until I reboot the machine. The 20% on the mobo is a bios option by EVGA (3360mhz). Tried following some oclocking instructions to take it to 4200 but would only run for a few minutes at that speed. Once things settle down, I hope to go back and oc more. But as it is, I should get to the mid teens. Anxious to see how your puppy performs. Alex |
Luke Send message Joined: 31 Dec 06 Posts: 2546 Credit: 817,560 RAC: 0 |
Thanks for the replies all! I use Speedfan to monitor the temps only. I'm not going to go fiddling around with fan voltages on my laptop, where things get hot really quick! It has been at 92C before I gave it a blast of compressed air. It cooled down to 60C after that. Once I have my build up and running at stock clocks, I'll try out all the progs you folks have mentioned (Speedfan, GPU-Z, CPU-Z, Coretemp, Realtemp, is that all?) and see which I like best. As for the OC I plan on applying, I want a quite powerful, but still really stable clock. I don't want to OC it to the point were it is only stable for 1 or 2 programs. I'm thinking 3.5Ghz-4Ghz and nothing more. At first, I'll put on a small, modest clock of perhaps 2.8Ghz-3.1Ghz and go from there. RAC wise, I am aiming for 20k. - Luke. |
Fred W Send message Joined: 13 Jun 99 Posts: 2524 Credit: 11,954,210 RAC: 0 |
Once I have my build up and running at stock clocks, I'll try out all the progs you folks have mentioned (Speedfan, GPU-Z, CPU-Z, Coretemp, Realtemp, is that all?) and see which I like best. The one other prog that I would include is EVGA Precision to set the fan speed on your GPU manually even if you don't o/c it. The automatic fan speed control can let it get rather over-hot for my liking. As to 20k RAC, back in March I got my heavily o/c'd (but very stable) Q9450 + stock speed GTX295 to its highest position ever of No 9 in the top hosts list with a RAC of 17015 (took a screen-shot for posterity ;-) so 20k should be well within reach for your beast. Good luck F. |
kittyman Send message Joined: 9 Jul 00 Posts: 51468 Credit: 1,018,363,574 RAC: 1,004 |
The EVGA Precision tool will come with the 260..... Can control the fan speed, but most importantly, will control the OC on the card. 10% or better, with some luck. And most have reported that the fan speed on the card doesn't do jack. It either OC's or the dog don't hunt. "Freedom is just Chaos, with better lighting." Alan Dean Foster |
zoom3+1=4 Send message Joined: 30 Nov 03 Posts: 65751 Credit: 55,293,173 RAC: 49 |
As I said elsewhere I bought 3 Magnetic DEMCiflex filters for the PCs, 2-120mm filters in Metallic Silver and 1-140mm filter in Black from Performance PCs, they even have round ones and have some custom type filters I see(HAF932, HAF922, and for the Lian Li PC-A7X and 7XXX). 2 x DEMCiflex 120mm Magnetic Fan Dust Filter - Metallic Silver (DEMCIFILTER120-SL) = $15.98 1 x DEMCiflex 140mm Magnetic Fan Dust Filter - Black (DEMCIFILTER140-BK) = $8.99 All this cost Me $31.92 delivered by Priority Mail to My PO Box in town. :) The silver ones are for pc3(a silver HP PC) and the black version is for the HAF932 case, I need to test how they'll fit before I order anymore. If You have Dust problems like I do, These should help, They require no screws or glue, As their magnetic as they stick to steel cases, there is a version for plastic and aluminum of course, But It's about $1(US) more. Hope the Information is useful for You Luke. The T1 Trust, PRR T1 Class 4-4-4-4 #5550, 1 of America's First HST's |
Luke Send message Joined: 31 Dec 06 Posts: 2546 Credit: 817,560 RAC: 0 |
@SJ: Thanks for the products! I believe my case has fan filters pre-installed... but I'll look into that deeper at a later point. A little update here as well... I will be buying myself the desk tomorrow after work. Only problem is that it is too high so it doesn't fit, so I have to saw about 2-2.5 inches off of the base. And then to make it look nice, I'll have to sand it etc. But I'll do that in the weekend. I was also taking a closer look at the monitors today, and I found Dell din't include DVI cables, instead they gave me crappy VGA... you'd think with a HD monitor they'd include HD cables, no?! So, that's 2 more items that I'll buy from the local tech shop this weekend. I'm also scouting for a electricity usage meter, however, we don't have Kill-a-watt's in NZ, so does anyone know or use another brand that I may be able to purchase here? - Luke. - Luke. |
Ianab Send message Joined: 11 Jun 08 Posts: 732 Credit: 20,635,586 RAC: 5 |
Hi Luke Dick Smith has a little power meter like a Killawatt. http://www.dse.co.nz/dse.shop/4b249c610046ef522740c0a87f3b0699/Product/View/M7319 I got one like it from the Warehouse for $20, but you never know if they have them in stock Ian |
Luke Send message Joined: 31 Dec 06 Posts: 2546 Credit: 817,560 RAC: 0 |
Hi Luke Hey there Ian. Can you vouch for the accuracy of the readings? Because I've read alot of reviews and forum posts of electricity usage meters and I've seen many of the brands described as woefully inaccurate... Thanks for the link anyways friend. - Luke. - Luke. |
zoom3+1=4 Send message Joined: 30 Nov 03 Posts: 65751 Credit: 55,293,173 RAC: 49 |
@SJ: Thanks for the products! I believe my case has fan filters pre-installed... but I'll look into that deeper at a later point. Sounds good, Remember for carpentry, Measure twice, Cut once. As to No kill a watt, If NZ followed Japan or the US or some other countries too numerous to mention(in the Americas), You could probably buy one, sigh, But I know that's not how It worked out. :o HP on their Monitors that I've seen they provide for both, But on the HP PC that I have they only provided VGA, No DVI and a 300w psu that means either very limited expansion or none at all, Hence why there's no way to turn off the built in video when one has a real video card in the PCI-E slot. And have I tried flashing the Bios? Yep, No luck, usb fdd isn't supported, The HP does know what a bootable cd rom is, but the cd I use does not use ms-dos(dr-dos) and as such the flash program won't flash the Bios, So I have the old internal (teac) fdd on standby waiting for the fact that I'd have to open up both sides of the HP PC case to find the power connector for the fdd and to plug in the fdd cable on to the motherboard, then I should be able flash the Bios of the HP Bios(ms-7184/3.47) with an MSI Bios(ms-7093/3.90) and that should then solve a few other problems too. The T1 Trust, PRR T1 Class 4-4-4-4 #5550, 1 of America's First HST's |
FiveHamlet Send message Joined: 5 Oct 99 Posts: 783 Credit: 32,638,578 RAC: 0 |
Looks loike you are about to hit the MAGIC NUMBER SJ |
Ianab Send message Joined: 11 Jun 08 Posts: 732 Credit: 20,635,586 RAC: 5 |
I wouldn't say they were Lab quality or anything, and I dont have a good power meter to compare it too. But I did plug it in with a 1kw electic heater, and the meter read 998 watts. Maybe that was a coincidence, and Chinese power meters may only be as accurate as Chinese heater elements. I dont know how accurate they are if the Power Factor is not 1.0, that may cause inaccurate readings. It should be in the ball park though. Ian |
zoom3+1=4 Send message Joined: 30 Nov 03 Posts: 65751 Credit: 55,293,173 RAC: 49 |
Looks loike you are about to hit the MAGIC NUMBER SJ That might happen anytime in the next 24 hours. Luke and others, You ought to See My thread that's entitled: Plans of Mice and Men... sigh The T1 Trust, PRR T1 Class 4-4-4-4 #5550, 1 of America's First HST's |
Luke Send message Joined: 31 Dec 06 Posts: 2546 Credit: 817,560 RAC: 0 |
Well, It's Tuesday afternoon here. I received the Scythe Kaze Master FC and the Razer Diamondback 3G Gaming mouse today. So here are the pics... A few things have changed on my spreadsheet as well... It's getting really close to the build date, which is probably going to happen 26-28 December. Can't wait! Also a quick question to you all... How do you folks apply your thermal paste? Grain of rice, Long thin line, spread out with a credit card, etc... or do you just have any comments about the thermal paste application process? So far, I like the long line idea... just apply a thin line across the CPU and let it spread out on contact with the HS. - Luke. - Luke. |
zoom3+1=4 Send message Joined: 30 Nov 03 Posts: 65751 Credit: 55,293,173 RAC: 49 |
Lets see spread thin with a credit card or a card like one that's not so valuable as I'd rather not use a credit/debit card for that. The heatsink I have is suffering from dust and keeping It totally clean is very hard to do, So I get higher temps as a result, sigh. The T1 Trust, PRR T1 Class 4-4-4-4 #5550, 1 of America's First HST's |
Fred W Send message Joined: 13 Jun 99 Posts: 2524 Credit: 11,954,210 RAC: 0 |
... I just follow the instruction supplied by Arctic Silver here. They should know what they are on about. F. |
IFRS Send message Joined: 21 May 99 Posts: 1736 Credit: 259,180,282 RAC: 0 |
Luke, Alex, that sounds like the nvidia underclocking problem that kicks on some machines. It just goes to 2d mode. You may want to try RivaTuner (guru3d.com) to force 3d performance all the times. Too bad RivaTuner still didn´t see the second gpu on my machines. Sometimes my GTX 295s suffer on that. You may take a look at your nvidia panel for Win 7, because i read somewhere that vista drivers have a force 3d performance somewhere. Dont have my Win 7 machines around to check that now. |
dnolan Send message Joined: 30 Aug 01 Posts: 1228 Credit: 47,779,411 RAC: 32 |
I use the above, too. -Dave |
Luke Send message Joined: 31 Dec 06 Posts: 2546 Credit: 817,560 RAC: 0 |
I have received the Thermalright heatsink, the blue cold cathode set, the Scythe 2000rpm fan, and the OCNZ fan. And oops... I just discovered a problem. And I am not even up to the build phase yet! I just noticed that the Thermalright Ultra 120 Extreme 1366RT uses a fan holder instead of the wire clips like the standard model. And the fan holder only takes fans 25mm in depth... the Scythe Ultra Kaze is 38mm. So I've added a Thermalright Ultra 120 Extreme wire clip set (NZ$9.17) to my list of purchases. - Luke. - Luke. |
Luke Send message Joined: 31 Dec 06 Posts: 2546 Credit: 817,560 RAC: 0 |
Well, it is a Friday night, and it is time to post an update. Nearly done with all the ordering, just a few things to go. Over the past few days, I have received the heatsink, the tri-LED fan, my 2000rpm backup Scythe Fan and 1 cold cathode. Here are the pics... And here is what is left to order... I will keep the few that are watching updated. - Luke. - Luke. |
kittyman Send message Joined: 9 Jul 00 Posts: 51468 Credit: 1,018,363,574 RAC: 1,004 |
Well, It's Tuesday afternoon here. I received the Scythe Kaze Master FC and the Razer Diamondback 3G Gaming mouse today. I suggest you visit the Arctic Silver website and follow their reccomendations...... I have been using MX-2 as of late, and it seems to work well with the 'long thin line' application technique. But I think it also flows a bit better than Arctic Silver does....... I have checked how it does by applying it, seating the heatsink, and running it thought a few full power runs and shutdowns before removing the heatsink to check how well it has covered the base of the heatsink and the face of the CPU... Many in the OCing forums used to recommend the 'credit card scrape' method with the Arctic Silver products....which I also used with success..... Apply a small amount to the CPU face.....and scrape all excess off with a good straightedge. A clean, sharp, credit card was the preferred tool at the time (probably a good choice, as you usually had one handy after buying the bits, but it might get a tad tattered in the process). And then repeat the process on the base of the heatsink. The result should be no excess heatsink compound on either surface, so when you mate the two, you should get a very good thermal interface. I have become very happy with the thin line technique using MX-2...as it is very forgiving due to the flow characteristics of the MX-2 paste. "Freedom is just Chaos, with better lighting." Alan Dean Foster |
©2024 University of California
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.