Yes, I didn't know what to do, so I tried this too. But it said "http internal server error" before. I (still) don't know what to do. When I try to connect myself to SETI (again) it says that I'm already attached to the project, which is of course the truth.
I have a cable modem, my connections to internet and e-mail are OK.
"Boinc Manager-Options": "Http Proxy": Address "setiathome.berkeley.edu", Port "80" - this is all.
My windows firewall works, I took it off, but "http internal server error" was still there.
Any suggestion?
Real thanks and BR, Dusa

5.8.2007 16:40:05||Contacting account manager at http://setiathome.berkeley.edu/

You tried to make SETI the BOINC Account Manager (BAM), which it can not do. You have to only attach to SETI, or find a BAM site you want to use. This is what is now causing your error.

Clear all HTTP proxy information from the options. It should be left blank for normal internet connection.

Yes, I didn't know what to do, so I tried this too. But it said "http internal server error" before. I (still) don't know what to do. When I try to connect myself to SETI (again) it says that I'm already attached to the project, which is of course the truth.
I have a cable modem, my connections to internet and e-mail are OK.
"Boinc Manager-Options": "Http Proxy": Address "setiathome.berkeley.edu", Port "80" - this is all.
My windows firewall works, I took it off, but "http internal server error" was still there.
Any suggestion?
Real thanks and BR, Dusa

5.8.2007 16:40:05||Contacting account manager at http://setiathome.berkeley.edu/

You tried to make SETI the BOINC Account Manager (BAM), which it can not do. You have to only attach to SETI, or find a BAM site you want to use. This is what is now causing your error.

5.8.2007 16:40:05||Contacting account manager at http://setiathome.berkeley.edu/

You tried to make SETI the BOINC Account Manager (BAM), which it can not do. You have to only attach to SETI, or find a BAM site you want to use. This is what is now causing your error.

4.8.2007 21:08:58||Version change (5.10.13 -> 5.4.11); running CPU benchmarks

This shows you went from a newer to older version. The newer version has some new things in the configuration files the old software does not understand, so you may get things like the http errors you are receiving.

It is recommended you go back to the 5.10.13. You can go back to the 5.8.16, which will understand most of it, and still should work. Going back to 5.4 and before it will not.

THANK YOU, THANK YOU AND THANK YOU!!!
Best regards
Dusa

"Suspended by user, won't get new tasks." is the information about my status when I click "Projects".

The above indicates that your have told Boinc to stop processing WU from the project and to not get any new work.
Solution: Go to Projects tab and highlight the project line (Seti@home).
Click on the 'Resume' button, it will change to 'Suspend'.
Click on the 'Allow new task' button, it will change to 'No new task'.

For future reference the buttons indicates the action taken when clicked not the current state. The Status column indicates blocking action you have done and/or project requested time delays. You may also want to look under the Activity menu to see that Boinc is not suspended there.

Please confirm if this helped.

This is a recent copy of my messages from "Messages":
4.8.2007 21:08:58||Starting BOINC client version 5.4.11 for windows_intelx86
4.8.2007 21:08:58||libcurl/7.15.3 OpenSSL/0.9.8a zlib/1.2.3
4.8.2007 21:08:58||Data directory: C:\\Program Files\\BOINC
4.8.2007 21:08:58||Processor: 1 GenuineIntel Intel(R) Celeron(R) CPU 2.80GHz
4.8.2007 21:08:58||Memory: 511.48 MB physical, 1.22 GB virtual
4.8.2007 21:08:58||Disk: 58.59 GB total, 40.07 GB free
4.8.2007 21:08:58||Version change (5.10.13 -> 5.4.11); running CPU benchmarks
4.8.2007 21:08:58|SETI@home|URL: http://setiathome.berkeley.edu/; Computer ID: not assigned yet; location: ; project prefs: default
4.8.2007 21:08:58||No general preferences found - using BOINC defaults
4.8.2007 21:08:58||Reading preferences override file
4.8.2007 21:08:58||Local control only allowed
4.8.2007 21:08:58||Listening on port 31416
4.8.2007 21:08:58||Suspending network activity - running CPU benchmarks
4.8.2007 21:09:00||Running CPU benchmarks
4.8.2007 21:09:59||Benchmark results:
4.8.2007 21:09:59|| Number of CPUs: 1
4.8.2007 21:09:59|| 1331 floating point MIPS (Whetstone) per CPU
4.8.2007 21:09:59|| 2098 integer MIPS (Dhrystone) per CPU
4.8.2007 21:09:59||Finished CPU benchmarks
4.8.2007 21:10:00||Resuming computation
4.8.2007 21:10:00||Rescheduling CPU: Resuming computation
4.8.2007 21:10:00||Resuming network activity
4.8.2007 21:13:58||Fetching configuration file from http://setiathome.berkeley.edu/get_project_config.php
I hope this will help. Thanks and BR, Dusa

The trailing slash is simply the difference between:

http://boinc.bakerlab.org/rosetta

and

http://boinc.bakerlab.org/rosetta/ <--- Note the trailing slash.

I'll admit it does seem strange BOINC comes back and says it can't even find the sites, rather than a nag about syntax or something like that.

Hmmmm....

I just tried the Attach dialog for EAH both with and without the trailing slash and it connected to the project and moved on to the next step in the the attach process. So something is definitely not working right on your end for some reason.

Also, I noticed that there aren't any hosts listed for the account you are posting from, so the host you took the message tab snippet from must be attached to a different account than this one.

<edit> Oh Boy!! I went to BOINCStats, and sure enough there are two separate accounts with your Username, one attached to SAH and the other to Rosetta.

The usual cause for that is not using the same email address for all projects when you attach to them. Do you still have the signup email reply for the original SAH account?

Is this your Real Account?

Alinator

"Suspended by user, won't get new tasks." is the information about my status when I click "Projects".

The above indicates that your have told Boinc to stop processing WU from the project and to not get any new work.
Solution: Go to Projects tab and highlight the project line (Seti@home).
Click on the 'Resume' button, it will change to 'Suspend'.
Click on the 'Allow new task' button, it will change to 'No new task'.

For future reference the buttons indicates the action taken when clicked not the current state. The Status column indicates blocking action you have done and/or project requested time delays. You may also want to look under the Activity menu to see that Boinc is not suspended there.

Please confirm if this helped.

This is a recent copy of my messages from "Messages":
4.8.2007 21:08:58||Starting BOINC client version 5.4.11 for windows_intelx86
4.8.2007 21:08:58||libcurl/7.15.3 OpenSSL/0.9.8a zlib/1.2.3
4.8.2007 21:08:58||Data directory: C:\\Program Files\\BOINC
4.8.2007 21:08:58||Processor: 1 GenuineIntel Intel(R) Celeron(R) CPU 2.80GHz
4.8.2007 21:08:58||Memory: 511.48 MB physical, 1.22 GB virtual
4.8.2007 21:08:58||Disk: 58.59 GB total, 40.07 GB free
4.8.2007 21:08:58||Version change (5.10.13 -> 5.4.11); running CPU benchmarks
4.8.2007 21:08:58|SETI@home|URL: http://setiathome.berkeley.edu/; Computer ID: not assigned yet; location: ; project prefs: default
4.8.2007 21:08:58||No general preferences found - using BOINC defaults
4.8.2007 21:08:58||Reading preferences override file
4.8.2007 21:08:58||Local control only allowed
4.8.2007 21:08:58||Listening on port 31416
4.8.2007 21:08:58||Suspending network activity - running CPU benchmarks
4.8.2007 21:09:00||Running CPU benchmarks
4.8.2007 21:09:59||Benchmark results:
4.8.2007 21:09:59|| Number of CPUs: 1
4.8.2007 21:09:59|| 1331 floating point MIPS (Whetstone) per CPU
4.8.2007 21:09:59|| 2098 integer MIPS (Dhrystone) per CPU
4.8.2007 21:09:59||Finished CPU benchmarks
4.8.2007 21:10:00||Resuming computation
4.8.2007 21:10:00||Rescheduling CPU: Resuming computation
4.8.2007 21:10:00||Resuming network activity
4.8.2007 21:13:58||Fetching configuration file from http://setiathome.berkeley.edu/get_project_config.php
I hope this will help. Thanks and BR, Dusa

WHY WAS I SUSPENDED AND WHY I WON'T GET NEW TASKS? THANKS AND BR, DUSA

You will need to explain yourself better than this. What do you mean by 'suspended'?
Do you mean that the Seti in the Project tab is suspended?
Do you mean that the WU in the Tasks tab is suspended?
Do you mean that you are seeing seeing that the project is suspended in the Message tab log?
Do you mean the network connection is suspended?
Any of the above you could have accidentally done by clicking the Suspend button or possibly making a change in your preferences or Activity Menu.

We need some information in context to help.
Posting the message log might also help us understand what you're getting at.

I have very stupidly (although with a good purpose)made several accounts for SETI - all from my home computer. Please remove all my accounts but the last one: e-mail XXXXX@email.si. It was made today (30. 7. 2007). You can check all my accounts: xxxx@amis.net, xxxx@amis.net, xxxx@gmail.com and the last one xxxx@email.si- all these accounts are connected from one (= my personal) computer at my home. I'm very sorry for all kinds of inconveniences. Thank you and best regards, Dusanka

Accounts are never deleted. Scientist don't like to mess with the integrety of the database.

I suggest you edit out your email address since spam bot roam the net looking for good email address to spam. You have one hr from the time you post to edit it.