41)
Message boards :
Number crunching :
Faster GPUs with Nvidia 310.70?
(Message 1315395)
Posted 15 Dec 2012 by Paul D Harris Post: I am confused is Jason multibeam x41zb Cuda, supposed to replace the lunatics unified installer as if being faster or better than the lunitics? So I should run this now since lunatics no longer has a download for their versions. This is the first I have heard of multibeam x41zb from Jason. I realize it is a hand install. So this is what crunchers are using now? |
42)
Message boards :
Number crunching :
Faster GPUs with Nvidia 310.70?
(Message 1315385)
Posted 15 Dec 2012 by Paul D Harris Post: I am confused is Jason multibeam x41zb Cuda, supposed to replace the lunatics unified installer as if being faster or better than the lunitics? |
43)
Message boards :
Number crunching :
Going from a GTX460 to GTX 600 Series.
(Message 1313372)
Posted 10 Dec 2012 by Paul D Harris Post: I found at tigerdirect had ASUS P9X79 for 259 dollars and i7 3820 for 279 dollars if I can get the 600 dollars up I will upgrade to that. I just upgraded since September to now Coolmax ZU Series ZU-1000B 1000W ATX12V v2.31 & EPS12V v2.91 SLI Ready CrossFire Ready 80 PLUS Bronze Certified Modular Power Supply = $87.74 win 8 pro upgrade = $39.99 Acer G276HL Dbd 27-Inch Screen LED-Lit Monitor = $244.76 AZZA Solano 1000 CSAZ-1000 Full Tower Case (Black) = $114.99 Antec Kuhler H2O 620 Liquid CPU Cooler System = $59.99 OCZ Technology 128GB Agility 4 Series SATA 6Gb/s 2.5-Inch Solid State Drive( SSD) With Up to 420 MB/s Read And 72K Max.IOPS- AGT4-25SAT3-128G = $99.99 So these upgrades cost a little over $700 including S&H so Iguess I will get the new I7 3820 and ASUS P9X79 which will replace the i7 920 and the ASUS P6T board and get 2 more sticks of corsair vengeance memory and keep my 2 460 cards |
44)
Message boards :
Number crunching :
Going from a GTX460 to GTX 600 Series.
(Message 1313365)
Posted 9 Dec 2012 by Paul D Harris Post: I guess Windows has installed the default drivers for the MB/chipset and probably thats why it doesnt see the 3rd channel (and the memory attached to it)... Good idea I upgraded from win7 ultimate to win8 pro using drivers from my upgrade which is win7. ASUS web sit has only up to win7 ultimate drivers for P6T board no win8 drivers so I guess I am out of luck unless they write win8 drivers for P6T which is an old board. I found at tigerdirect had ASUS P9X79 for 259 dollars and i7 3820 for 279 dollars if I can get the 600 dollars up I will upgrade to that. I just upgraded since September to now Coolmax ZU Series ZU-1000B 1000W ATX12V v2.31 & EPS12V v2.91 SLI Ready CrossFire Ready 80 PLUS Bronze Certified Modular Power Supply = $87.74 win 8 pro upgrade = $39.99 Acer G276HL Dbd 27-Inch Screen LED-Lit Monitor = $244.76 AZZA Solano 1000 CSAZ-1000 Full Tower Case (Black) = $114.99 Antec Kuhler H2O 620 Liquid CPU Cooler System = $59.99 OCZ Technology 128GB Agility 4 Series SATA 6Gb/s 2.5-Inch Solid State Drive( SSD) With Up to 420 MB/s Read And 72K Max.IOPS- AGT4-25SAT3-128G = $99.99 So these upgrades cost a little over $700 including S&H so Iguess I will get the new I7 3820 and ASUS P9X79 which will replace the i7 920 and the ASUS P6T board and get 2 more sticks of corsair vengeance memory and keep my 2 460 cards |
45)
Message boards :
Number crunching :
Win8 Pro only sees 16gb of 24gb memory
(Message 1313273)
Posted 9 Dec 2012 by Paul D Harris Post: ASUS P6T win7 ultimate saw all of my 24gb but not at first it saw 16gb I forgot what I had to do to make it see all 24gb of my memory. I will look for Memory Remap Feature I reset the bios and the bios sees 16gb and the os while cpuz and piriform speccy see 24gb. edit I could not find Memory Remap Feature or anything related to 64 bit os. I will flash the bios although I have the updated bios already and asus does not have any bios utilities that work with win8 I will download the latest bios and flash the bios through the bios itself. edit I flashed the bios 1408 which is the latest for my P6T and ASUS does not have a bios for win8 pro only up to win7 ultimate. So I doubt that ASUS will add a win8 bios for the P6T board. |
46)
Message boards :
Number crunching :
Win8 Pro only sees 16gb of 24gb memory
(Message 1313245)
Posted 9 Dec 2012 by Paul D Harris Post: ASUS P6T win7 ultimate saw all of my 24gb but not at first it saw 16gb I forgot what I had to do to make it see all 24gb of my memory. |
47)
Message boards :
Number crunching :
Win8 Pro only sees 16gb of 24gb memory
(Message 1313180)
Posted 9 Dec 2012 by Paul D Harris Post: From Microsoft Version Limit on X86 Limit on X64 Windows 8 Enterprise 4 GB 512 GB Windows 8 Professional 4 GB 512 GB Windows 8 4 GB 128 GB From Piriform Speccy RAM 24.0 GB Dual-Channel DDR3 @ 801MHz (9-9-9-24) So utilities like Piriform Speccy and cpuz all show 24gb of memory yet win8 pro shows only 16gb of memory. And it is triple cjannel yet these show dual channel. I guess I will take out the memory and reseat them and do a memtest 86 on them. |
48)
Message boards :
Number crunching :
Win8 Pro only sees 16gb of 24gb memory
(Message 1312942)
Posted 9 Dec 2012 by Paul D Harris Post: Can any one tell me how to get my win8 pro to see all of my memory. |
49)
Message boards :
Number crunching :
Windows 8 Release Preview now available
(Message 1312567)
Posted 8 Dec 2012 by Paul D Harris Post: Well I just upgraded to win8 pro upgrade download for 39.99 for my desktop and installed the same on my laptop but Microsoft said it was used on another pc so I bought a full win8 pro key for 69.99 pretty inexpensive 2 os for 110 dollars. Better hurry sale ends in January.. I don't like the metro and no start button even though metro replace the start menus. There are work around I can get to my computer buy clicking the file button and I can add a start button by downloading from vendors which by passes the metro also. I miss the side bar and the aero effect and win7 had better backgrounds. Unlike win7 once I upgraded to win8 there was no way to restore back to win7. I could also put the same copy of win7 on different pc's not so with win8. |
50)
Message boards :
Number crunching :
Going from a GTX460 to GTX 600 Series.
(Message 1312547)
Posted 8 Dec 2012 by Paul D Harris Post: I just changed my cooling from stock which was running at 97 degrees to Antec Kuhler H2O 620 Liquid CPU Cooler System which runs at 54 degrees. My Thermaltake V1 Max-Performance CPU Cooler with Massive 110mm Fan kept temps to around 68 degrees but the pins broke and I put the stock cooler in until I bought and replaced it with the Antec Kuhler H2O 620 Liquid CPU Cooler. I also upgraded to win 8 pro for 39.99 upgrad and a full win 8 pro for 69.99 on my laptop I tried to use the same one from my desktop to my lap top but Microsoft said it was already being used so I got a new key. I also got a new Acer G276HL Dbd 27-Inch Screen LED-Lit Monitor and AZZA Solano 1000 CSAZ-1000 Full Tower Case (Black) and just got my cruncher back up and running nice and cool and quite. |
51)
Message boards :
Number crunching :
app_info.xml - Please review
(Message 1289120)
Posted 29 Sep 2012 by Paul D Harris Post: I am getting MB nvida and AP cpu work. |
52)
Message boards :
Number crunching :
How hot is too hot - GPU
(Message 1278935)
Posted 1 Sep 2012 by Paul D Harris Post: Oh its possible Mark. A 690 cost about a grand. |
53)
Message boards :
Number crunching :
New AstroPulse for GPU ( ATi & NV) released (r1316)
(Message 1271355)
Posted 14 Aug 2012 by Paul D Harris Post: So what should my app_info.xml look like? Here is my graphics. Graphics AL2016W (1680x1050@59Hz) 767MB GeForce GTX 460 (nVidia) 75 °C 767MB GeForce GTX 460 (nVidia) 76 °C ForceWare version 304.48 SLI Disabled MY 3 WU errored out how to fix? Workunit 1032412105 http://setiathome.berkeley.edu/workunit.php?wuid=1032412105 Exit status -1073741515 (0xffffffffc0000135) Unknown error number Workunit 1032343887 http://setiathome.berkeley.edu/workunit.php?wuid=1032343887 Exit status -1073741515 (0xffffffffc0000135) Unknown error number Workunit 1032246042 http://setiathome.berkeley.edu/workunit.php?wuid=1032246042 Exit status -1073741515 (0xffffffffc0000135) Unknown error number |
54)
Message boards :
Number crunching :
New AstroPulse for GPU ( ATi & NV) released (r1316)
(Message 1271238)
Posted 13 Aug 2012 by Paul D Harris Post: Only one typo that i can see, just remove the -ve sign from the last <cmdline>-</cmdline> entry, Thanks Claggy You mean this <cmdline>-</cmdline> to this <cmdline></cmdline> |
55)
Message boards :
Number crunching :
New AstroPulse for GPU ( ATi & NV) released (r1316)
(Message 1271186)
Posted 13 Aug 2012 by Paul D Harris Post: I finally got an AP for my 460 NV card I have everything set to default it should run OK? <app> <name>astropulse_v6</name> </app> <file_info> <name>AP6_win_x86_SSE2_OpenCL_NV_r1316.exe</name> <executable/> </file_info> <file_info> <name>libfftw3f-3.dll</name> <executable/> </file_info> <app_version> <app_name>astropulse_v6</app_name> <version_num>601</version_num> <avg_ncpus>0.04</avg_ncpus> <max_ncpus>0.04</max_ncpus> <platform>windows_intelx86</platform> <plan_class>cuda_fermi</plan_class> <cmdline></cmdline> <coproc> <type>CUDA</type> <count>0.5</count> </coproc> <file_ref> <file_name>AP6_win_x86_SSE2_OpenCL_NV_r1316.exe</file_name> <main_program/> </file_ref> <file_info> <name>llibfftw3f-3.dll</name> <executable/> </file_info> </app_version> <app_version> <app_name>astropulse_v6</app_name> <version_num>601</version_num> <avg_ncpus>0.04</avg_ncpus> <max_ncpus>0.04</max_ncpus> <platform>windows_x86_64</platform> <plan_class>cuda_fermi</plan_class> <cmdline>-</cmdline> <coproc> <type>CUDA</type> <count>0.5</count> </coproc> <file_ref> <file_name>AP6_win_x86_SSE2_OpenCL_NV_r1316.exe</file_name> <main_program/> </file_ref> <file_info> <name>llibfftw3f-3.dll</name> <executable/> </file_info> </app_version> |
56)
Message boards :
Number crunching :
Win 7 and XP
(Message 1270785)
Posted 12 Aug 2012 by Paul D Harris Post: I had an old XP but I had a power outage and it killed my cruncher hard drive and I had to borrow that XP box hard drive and put it in my crunched and now the XP box sits idle not able to run and I ran out of money I had to put full two rear strut assembly and a wheel cylinder and sway bar links for my car it had a harsh ride but is butter smooth now. BCD works just fine. |
57)
Message boards :
Number crunching :
Win 7 and XP
(Message 1270516)
Posted 11 Aug 2012 by Paul D Harris Post: In XP mode control panel it list under Display adapters as Virtual PC Integration COMPONETS s3 Trio32/64. Other devices as Virtual PC Integration Device this entry have 3 entries. Universal Serial Bus controllers have 2 entries as USB Virtualization Hub Driver. I think this is causing the problems because I have Nvidia 460 cards and the scanner is USB. The error I get is 1607 isscript and unable to connect to scanner. I googled the 1607 error and solution are for XP outright and do not fix anything in XP mode. I googled the unable to connect to scanner and same result as before did not fix anything in XP mode. So I thought I should install XP and I discovered my problem and I expanded my drive back to normal. Then I did the BCD and screwed up the XP install by loading the MB drivers instead of the Video drivers first and the MB drivers second after the video drivers install. So I am on my 3 XP install but out of time I have to go to my dialysis treatment so I will be of no use until tomorrow after I recover from my treatment. So bye for now. |
58)
Message boards :
Number crunching :
Win 7 and XP
(Message 1270506)
Posted 11 Aug 2012 by Paul D Harris Post: Thanks Swordfish |
59)
Message boards :
Number crunching :
Win 7 and XP
(Message 1270455)
Posted 11 Aug 2012 by Paul D Harris Post: That's good and OK but mine I get software and driver errors and I looked up the errors and the solutions does not work either so I guess I will need XP installed. It is a discontinued Visioneer 9320 and I need to digitize film and slides. I use it for my photo art for creative reasons and it won't work with Vista/Win 7. I think it is mostly a software errors or maybe Motherboard chipset drivers errors because ASUS MB disk doesn't work right in XP mode or my Nvida drivers or graphic card audio drivers or something like that all in XP mode. |
60)
Message boards :
Number crunching :
Win 7 and XP
(Message 1270440)
Posted 11 Aug 2012 by Paul D Harris Post: Why do that? I use this & it works a charm. From my first post How can I put XP on my Win 7 cruncher? I need XP in order to use my film scanner that is only XP and earlier compatible. I have tried virtual XP but it will not work. So I need an XP installation on my win 7 cruncher. I don't know how to do it. The film scanner does not work in XP mode. This link helps explain it. But since it's a virtualized environment, it can't use hardware acceleration (read: "XP Mode is lousy for gaming"). Even though I am trying to use my film scanner and not for gaming. http://www.tomshardware.com/forum/687-63-installing-windows Beside BCD worked. I asked how to help. |
©2024 University of California
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.