Questions and Answers :
GPU applications :
ATI GPU loops at 21.611 % for almost all units
Message board moderation
Previous · 1 . . . 3 · 4 · 5 · 6 · 7 · 8 · 9 · Next
Author | Message |
---|---|
merle van osdol Send message Joined: 23 Oct 02 Posts: 809 Credit: 1,980,117 RAC: 0 |
Total screwup? I installed my new hd 7770. It runs fine but now my two 6570's won't work. Did I totally screwup expecting I could get all three to run seti/lunatics? I have no sli capability with these cards. |
Darrell Wilcox Send message Joined: 11 Nov 99 Posts: 303 Credit: 180,954,940 RAC: 118 |
I left in that MB stuff in config_app because I didn't want to wind up without anything for my gpu in case the astropulse gpu wu's didn't come through. Hi Merle, you did not mention "setiathome_enhanced", but I think those are all gone now (someone please correct me if I am wrong here). As always, follow the advice from Zalster and copy app_info.xml to a safe location before making this change, just in case something goes sideways on you. If you want to ONLY run MB on the CPUs, and ONLY run AP on the GPUs, here is a simple change to make that happen: 1) just search your app_info.xml using Notepad for the string "<name>setiathome_v7</name>". It will be found on line 3. 2) Repeat the search to find the second occurrence. Go up 1 line, and insert a line BEFORE the " <app>" line. The inserted line will read " </app_info>". That section of code will now read: <open_name>ap_cmdline.txt</open_name> </file_ref> </app_version> <app> <name>setiathome_v7</name> </app> <file_info> <name>MB7_win_x86_SSE_OpenCL_ATi_r1843.exe</name> The remainder of that file will be ignored by BOINC so you can leave it in or remove it as you wish. Have BOINC manager reload your configuration files (Advanced tab -> Read config files). You should then get MB for CPU and AP for GPU ONLY, and no setihome_enhanced if your preferences are set to get both. |
merle van osdol Send message Joined: 23 Oct 02 Posts: 809 Credit: 1,980,117 RAC: 0 |
It didn't work for me. No astropulse gpu's available. Are they scarce? I did however figure out how to get all 3 gpu's running again with cc_config.xml. |
merle van osdol Send message Joined: 23 Oct 02 Posts: 809 Credit: 1,980,117 RAC: 0 |
dup_error |
Zalster Send message Joined: 27 May 99 Posts: 5517 Credit: 528,817,460 RAC: 242 |
The datacenter is undergoing maintenance today (just now, I still can not connect to upload or download) and a larger portion of tomorrow. So there will be periods of time when access to the database will not be available. Zalster |
BilBg Send message Joined: 27 May 07 Posts: 3720 Credit: 9,385,827 RAC: 0 |
It didn't work for me. .... Don't mind the Darrell Wilcox's post - he answers to VERY OLD post which is totally out of date now - you have new app_info.xml with only MultiBeam CPU + AstroPulse GPU, right? I did however figure out how to get all 3 gpu's running again with cc_config.xml If you mean <use_all_gpus>1</use_all_gpus> - yes, that's it :) I have no sli capability with these cards. 1) SLI is NVIDIA technology, ATI AMD uses the name CrossFireX http://en.wikipedia.org/wiki/AMD_CrossFireX 2) No, you don't need SLI or CrossFireX for CUDA or OpenCL Computing   - ALF - "Find out what you don't do well ..... then don't do it!" :)  |
merle van osdol Send message Joined: 23 Oct 02 Posts: 809 Credit: 1,980,117 RAC: 0 |
- you have new app_info.xml with only MultiBeam CPU + AstroPulse GPU, right? App_info.xml is a complex piece of work. I shall have to work on that. |
BilBg Send message Joined: 27 May 07 Posts: 3720 Credit: 9,385,827 RAC: 0 |
app_info.xml is created a fresh-new every time you run Lunatics' Installer It is created by merging all .aistub files (which were just extracted from inside of Lunatics' Installer) Merging is performed by calling aimerge.cmd So app_info.xml contains descriptions for only the apps you selected in last run of Lunatics' Installer To see (out of curiosity) what's inside of Lunatics' Installer (and extract files): http://www.7-zip.org/ Â - ALF - "Find out what you don't do well ..... then don't do it!" :) Â |
merle van osdol Send message Joined: 23 Oct 02 Posts: 809 Credit: 1,980,117 RAC: 0 |
Well I screwed up editing my own app_info.xml. Then I put the original back and only got cpu tasks. Then I read your last comment and reinstalled lunatics. Now it is still not giving me gpu tasks but I read the latest app_info.xml that lunatics created and it looks good so I suppose now I must have patience and wait until the system regains trust in me to give me some astropulse gpu tasks. :-) , but it's not really funny. Patience, patience! And as soon as I said that and turned around, lo and behold the astropulse gpu wu's appeared from that dark and dangerous place of the system. Thanks, thanks. |
BilBg Send message Joined: 27 May 07 Posts: 3720 Credit: 9,385,827 RAC: 0 |
Well I screwed up editing my own app_info.xml What do you use to edit it? And what was in need of edit? (what change did you wanted?) Â - ALF - "Find out what you don't do well ..... then don't do it!" :) Â |
merle van osdol Send message Joined: 23 Oct 02 Posts: 809 Credit: 1,980,117 RAC: 0 |
That msg from Darrell Wilcox got me thinking along the line that I had to manually edit app_info.xml. |
merle van osdol Send message Joined: 23 Oct 02 Posts: 809 Credit: 1,980,117 RAC: 0 |
Today, MSI afterburner is showing that all 3 gpus are running at about 99%. So too does SIV64X but Boinc Mgr is now showing no progress % increases in the gpu's wu's. Will it eventually register to boinc mgr or are these units in some kind of perpetual loop? |
Zalster Send message Joined: 27 May 99 Posts: 5517 Credit: 528,817,460 RAC: 242 |
try suspending and then restarting the work units |
merle van osdol Send message Joined: 23 Oct 02 Posts: 809 Credit: 1,980,117 RAC: 0 |
I tried that once and it didn't work. Will try again. From time to time at least some of them will all of a sudden show an increase. |
merle van osdol Send message Joined: 23 Oct 02 Posts: 809 Credit: 1,980,117 RAC: 0 |
Because astropulse is a much larger wu than MB which I was used to, I think it is just the slow pace of the % changes, that make it seem like they are not "turning over". |
merle van osdol Send message Joined: 23 Oct 02 Posts: 809 Credit: 1,980,117 RAC: 0 |
Is it possible to set 2 gpu's to run 2 wu's concurrently while setting the 3rd gpu to run 3 wu's concurrently. My 7770 is hungry for more work. |
Zalster Send message Joined: 27 May 99 Posts: 5517 Credit: 528,817,460 RAC: 242 |
Beyond my knowledge, lol.....Maybe if you had 2 instance of Boinc managers running.. But that's just a wild guess so don't take me serious on that....Lets see what some of the others say.. |
Darrell Wilcox Send message Joined: 11 Nov 99 Posts: 303 Credit: 180,954,940 RAC: 118 |
To Merle van Osdol Message 1547037: Here is what you need from the BOINC Wiki: <coproc> specify a GPU. Used in combination with the Anonymous platform mechanism. The element has the form <coproc> <type>some_name</type> <count>1</count> <device_nums>0 2</device_nums> [ <peak_flops>1e10</peak_flops> ] </coproc> The name given in <type> must match that in the <coproc> element in app_info.xml. <count> is the number of GPU instances, and <device_nums> is their device numbers. <peak_flops> is the GPU peak FLOPS; it can be omitted if your app_info.xml specifies estimated application FLOPS. This mechanism has two purposes: to provide fine-grained control of the coprocessors recognized by BOINC (NVIDIA, AMD, and Intel GPUs), and to let you use coprocessors not recognized by BOINC. Now go read that page and develop an understanding before modifying your BOINC parameter file(s). And always, always, backup before modifying. Good luck in your endeavors. |
merle van osdol Send message Joined: 23 Oct 02 Posts: 809 Credit: 1,980,117 RAC: 0 |
Thanks, I'll be working on that. May have to get back to you with additional questions. |
merle van osdol Send message Joined: 23 Oct 02 Posts: 809 Credit: 1,980,117 RAC: 0 |
I understand the AP's deliver more points than MB's with the gpu's. Is it the same as far as cpu's? Is there a clear winner - AP's vs. MB's with the cpu? I use intel. Is there a readily available supply of AP tasks? Thanks for reading. |
©2024 University of California
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.