Message boards :
Number crunching :
Mayday ! Mayday !
Message board moderation
Author | Message |
---|---|
The_bestest Send message Joined: 7 Oct 06 Posts: 36 Credit: 82,706,887 RAC: 79 |
Sorry about posting this here, not sure that any other area would be a better fit. Managed to kill my main crunching machine this morning, looking to see if anyone has any thoughts on this. Home built system, i7 920, 6GB RAM, 2 250 video cards, Win 7 64-bit, ASUS P6T system board. Everything was running perfect for the past 4 months, then I get the brilliant idea to overclock it some this morning. Used the ASUS TURBO V utility to slightly (I thought) speed things up. Sorry, don't have the changes available. System froze up. No problem I think. Power down, go reset BIOS to default, try again. Power down went fine. But the system will not power up. No fans, no POST, no nothing. I have disconnected peripherals from the power supply (it's a modular 1000 Watt PS, so in theory I have plenty of 'juice'), removed the video cards, etc. Nothing still. There are jumpers on the system board for allowing changing component voltages. Set those. No luck. I appear to be getting voltage to the system board, as the internal Reset and Power buttons are lit. Will try some of the ASUS discussion boards, but thought I would try here too. Any help would be appreciated. Thanks again. Scott |
hiamps Send message Joined: 23 May 99 Posts: 4292 Credit: 72,971,319 RAC: 0 |
Sorry about posting this here, not sure that any other area would be a better fit. Reset your board bios by clearing your CMOS, do your overclocking in the bios. Official Abuser of Boinc Buttons... And no good credit hound! |
hiamps Send message Joined: 23 May 99 Posts: 4292 Credit: 72,971,319 RAC: 0 |
Check your power strip and make sure it didn't trip. Official Abuser of Boinc Buttons... And no good credit hound! |
geoff Send message Joined: 25 Apr 00 Posts: 123 Credit: 34,100,351 RAC: 18 |
I had similar problem after mains failure, I removed battery on my ASUS motherboard and then put it back and all was then OK PS I do my overclocking in the BIOS Geoff |
The_bestest Send message Joined: 7 Oct 06 Posts: 36 Credit: 82,706,887 RAC: 79 |
Thanks everyone, removing the RTC battery reset BIOS also. Should have known that. I am surprised that the system was completely dead though. Oh well. |
Luke Send message Joined: 31 Dec 06 Posts: 2546 Credit: 817,560 RAC: 0 |
Thanks everyone, removing the RTC battery reset BIOS also. Should have known that. I am surprised that the system was completely dead though. Oh well. Did you fry your whole system? Check the motherboard. I'd be suprised if you fried the CPU. Do your overclocking in the BIOS - don't trust these overclocking utilities. When you raise the mult., try setting the vcore at a reasonable level as well (1.00V to 1.300V) - DON'T LEAVE IT ON AUTO WHATEVER YOU DO!. I got a stable clock of 3.78GHz (mult. 21x, bus 180MHz, vcore 1.232V) and I didn't even fiddle with the RAM timings or clocks. Let us know if you have another go at it. - Luke. |
BilBg Send message Joined: 27 May 07 Posts: 3720 Credit: 9,385,827 RAC: 0 |
Sometimes when electricity stops for a very short time (0.5-1 seconds) my computer go off but "thinks" that it is on. I press the (soft)Power button but computer do not start. So I press the (soft)Power button for 10 seconds (to "pretend" that I switch the computer off). Then press the (soft)Power button shortly as usual and the computer starts. Â - ALF - "Find out what you don't do well ..... then don't do it!" :) Â |
Al Send message Joined: 3 Apr 99 Posts: 1682 Credit: 477,343,364 RAC: 482 |
A small, inexpensive UPS in this case is your best friend, from a system longevity standpoint. You might want to check into one, to help you ride out these minor power issues, if they happen with any frequency. |
©2024 University of California
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.