Task 8703903660
| Name | blc66_2bit_guppi_58838_27577_TIC67772767_0105.10255.818.20.29.27.vlar_3 |
| Workunit | 3940970641 |
| Created | 22 Apr 2020, 18:36:56 UTC |
| Sent | 22 Apr 2020, 18:38:37 UTC |
| Report deadline | 14 Jun 2020, 23:38:19 UTC |
| Received | 24 Apr 2020, 17:46:42 UTC |
| Server state | Over |
| Outcome | Success |
| Client state | Done |
| Exit status | 0 (0x00000000) |
| Computer ID | 8927978 |
| Run time | 2 hours 7 min 52 sec |
| CPU time | 15 min 17 sec |
| Validate state | Valid |
| Credit | 152.59 |
| Device peak FLOPS | 122.99 GFLOPS |
| Application version | SETI@home v8 v8.00 (cuda32) windows_intelx86 |
| Peak working set size | 100.78 MB |
| Peak swap size | 128.06 MB |
| Peak disk usage | 0.09 MB |
Stderr output
<core_client_version>7.14.2</core_client_version>
<![CDATA[
<stderr_txt>
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
Work Unit Info:
...............
WU true angle range is : 0.013480
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 3.32 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
boinc_exit(): worker didn't respond to exit request within 2 seconds, exiting anyway.
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 4.68 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 5.30 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 5.33 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
boinc_exit(): worker didn't respond to exit request within 2 seconds, exiting anyway.
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 5.33 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 5.33 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
boinc_exit(): worker didn't respond to exit request within 2 seconds, exiting anyway.
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 5.33 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 6.64 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 7.91 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 9.20 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
boinc_exit(): worker didn't respond to exit request within 2 seconds, exiting anyway.
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 11.27 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
boinc_exit(): worker didn't respond to exit request within 2 seconds, exiting anyway.
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 11.27 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 11.69 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 11.69 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 11.93 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
boinc_exit(): worker didn't respond to exit request within 2 seconds, exiting anyway.
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 15.75 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
boinc_exit(): worker didn't respond to exit request within 2 seconds, exiting anyway.
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 15.75 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 17.06 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 17.06 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 18.35 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 19.66 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 20.97 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
boinc_exit(): worker didn't respond to exit request within 2 seconds, exiting anyway.
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 22.29 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
boinc_exit(): worker didn't respond to exit request within 2 seconds, exiting anyway.
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 22.29 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 23.66 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
boinc_exit(): worker didn't respond to exit request within 2 seconds, exiting anyway.
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 25.02 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 26.30 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 26.63 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
boinc_exit(): worker didn't respond to exit request within 2 seconds, exiting anyway.
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 26.63 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 27.10 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
boinc_exit(): worker didn't respond to exit request within 2 seconds, exiting anyway.
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 28.32 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
boinc_exit(): worker didn't respond to exit request within 2 seconds, exiting anyway.
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 28.32 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 29.61 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
boinc_exit(): worker didn't respond to exit request within 2 seconds, exiting anyway.
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 30.13 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
boinc_exit(): worker didn't respond to exit request within 2 seconds, exiting anyway.
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 30.63 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
boinc_exit(): worker didn't respond to exit request within 2 seconds, exiting anyway.
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 31.24 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 32.29 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 44.00 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
boinc_exit(): worker didn't respond to exit request within 2 seconds, exiting anyway.
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 44.00 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 44.01 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 46.86 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 47.75 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
Worker Acknowledging exit request, spinning-> boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
v8 task detected
setiathome_CUDA: Found 1 CUDA device(s):
nVidia Driver Version 301.42
Device 1: GeForce GTX 260, 1792 MiB, regsPerBlock 16384
computeCap 1.3, multiProcs 27
pciBusID = 1, pciSlotID = 0
clockRate = 1262 MHz
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 260 is okay
SETI@home using CUDA accelerated device GeForce GTX 260
pulsefind: blocks per SM 1 (Pre-Fermi default)
pulsefind: periods per launch 100 (default)
Priority of process set to BELOW_NORMAL (default) successfully
Priority of worker thread set successfully
Restarted at 49.35 percent, with setiathome enhanced x41zi (baseline v8), Cuda 3.20
setiathome_v8 task detected
Detected Autocorrelations as enabled, size 128k elements.
re-using dev_GaussFitResults array for dev_AutoCorrIn, 4194304 bytes
re-using dev_GaussFitResults+524288x8 array for dev_AutoCorrOut, 4194304 bytes
cudaAcc_free() called...
cudaAcc_free() running...
cudaAcc_free() PulseFind freed...
cudaAcc_free() Gaussfit freed...
cudaAcc_free() AutoCorrelation freed...
cudaAcc_free() DONE.
Flopcounter: 39383180011574.937000
Spike count: 12
Autocorr count: 0
Pulse count: 9
Triplet count: 0
Gaussian count: 0
Worker preemptively acknowledging a normal exit.->
called boinc_finish
Exit Status: 0
boinc_exit(): requesting safe worker shutdown ->
boinc_exit(): received safe worker shutdown acknowledge ->
Cuda threadsafe ExitProcess() initiated, rval 0
</stderr_txt>
]]>
©2020 University of California
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.