Posts by Bhagwanmike

1) Questions and Answers : Windows : EEEP! Where did my WU's go? (Message 1933384)
Posted 3 May 2018 by Profile Bhagwanmike
Post:
Boy, is my face red. Bhagwan, always check to see that you have "Show All Tasks"!

Never mind.....

This dementia can be fun, sometimes. Others...

Keep crunching!
2) Questions and Answers : Windows : EEEP! Where did my WU's go? (Message 1933381)
Posted 3 May 2018 by Profile Bhagwanmike
Post:
So, after this week's downtime, I sit down at BOINC to see where we are at, and find about 10 WUs.
OK, there are problems getting back up to my cache, let's see what is going on at my SETI page, and
I found that I have over 150 WUs have been sent out. Hmmm.

What would be the quickest way to return these WUs to the fold so they can be processed. I am
relatively sure that my preferences didn't change, but I am concerned about what looks like over
150 time outs in the making!
3) Message boards : Number crunching : User achievements thread......... (Message 1918632)
Posted 13 Feb 2018 by Profile Bhagwanmike
Post:
Hello Fellow SETIzens,

A long time coming: we hit 13,000,000 and I am finally starting to pick up the pace.
Congratulations to all my fellow crunchers. Excelsior!!
4) Message boards : Number crunching : Gridcoin...? (Message 1907536)
Posted 16 Dec 2017 by Profile Bhagwanmike
Post:
It is a good thing I clicked on this thread; found out I could donate my Gridcoin to directly benefit
my first and favorite BOINC project. So far, I kicked in 700 (about $50.00) to the kitty! Have a great
holiday season, all!
5) Message boards : Number crunching : SETI/BOINC Milestones [ v2.0 ] - XXIX (Message 1899022)
Posted 4 Nov 2017 by Profile Bhagwanmike
Post:
Well, we have another million in the bank at 12. While I am working on getting more
assets on-line, I am happy to have contributed my meager! Congratulations to all on their
crunching milestones.
6) Message boards : Number crunching : SETI/BOINC Milestones [ v2.0 ] - XXIX (Message 1878758)
Posted 17 Jul 2017 by Profile Bhagwanmike
Post:
The power folks have me over a barrel, but I have hit 11,000,000.... finally!
Congratulations to all with new milestones. I will be happy when summer ends
and I can actually use my computer/GPU's horsepower. Until then, I will have
to console myself with existing progress. Excelsior!
7) Message boards : Number crunching : Welcome to the 18 Year Club! (Message 1872499)
Posted 11 Jun 2017 by Profile Bhagwanmike
Post:
Late again!! Pretty amazed the way the thing has grown. Congratulations to all, and to all a grand new year of crunching.
8) Message boards : Number crunching : SETI/BOINC Milestones [ v2.0 ] - XXIX (Message 1833781)
Posted 3 Dec 2016 by Profile Bhagwanmike
Post:
Hi there,

Not anywhere near the giants, but just posted my 10,000,000th. Will keep at it.
Congratulations to all participants, and thanks to the community
9) Message boards : Number crunching : SETI/BOINC Milestones [ v2.0 ] - XXIX (Message 1800952)
Posted 5 Jul 2016 by Profile Bhagwanmike
Post:
Just over a hundredth of your output! Hit 9M today. Wish I had more compute power and electric bill paying ability! Congratulations on an herculean effort.
10) Message boards : Number crunching : SETI/BOINC Milestones [ v2.0 ] - XXIX (Message 1761108)
Posted 31 Jan 2016 by Profile Bhagwanmike
Post:
Hi there!

My own modest progress:
I hit 8M today. Now that things are up and running with V8, I expect to pick up the pace here shortly.
Congratulations to all on their achievements!
Excelsior!
11) Message boards : Number crunching : SETI/BOINC Milestones [ v2.0 ] - XXIX (Message 1733084)
Posted 9 Oct 2015 by Profile Bhagwanmike
Post:
Just cracked 7 million. The last one here took two months, which is starting to look like real production. The replacement for the 590 furnace, my 660, is not half bad! Now if only I could get my hands on, say, a 980..... wishes and fishes! Congrats to all my crunching compatriots.
12) Message boards : Number crunching : SETI/BOINC Milestones [ v2.0 ] - XXIX (Message 1698919)
Posted 6 Jul 2015 by Profile Bhagwanmike
Post:
Just hit 6 million. The 590 died, but the 660 is working pretty fine. It is too bloody hot to run in the daytime with no air, though!
13) Message boards : Number crunching : Welcome to the 16 year club (Message 1696262)
Posted 27 Jun 2015 by Profile Bhagwanmike
Post:
Always seem to be late to these celebrations; I hope not "fashionably" late!

Congratulations to all! Stalwart comrades and all that stuff

I am happy to be amongst all you crunchers


Bhagwanmike
14) Message boards : Number crunching : PCIe x1 GPU cards? (Message 1666907)
Posted 18 Apr 2015 by Profile Bhagwanmike
Post:
The spec for X1 PCI-e states that the max is 25W. I would think that the cards intended for an X1 slot should conform to that standard. YMMV of course, but I would think that if the MB is plumbed for X1, the traces should be able to handle it.
15) Message boards : Number crunching : CLOSED** SETI/BOINC Milestones [ v2.0 ] - XXVIII **CLOSED (Message 1654059)
Posted 18 Mar 2015 by Profile Bhagwanmike
Post:
Finally made 5 million. Took considerable time, but not a lot of effort. Thanks for the work units! Setting my sights on 10 million.
16) Message boards : Politics : GOod GOodly MOogly.*** U.S. Embassy in ***Yemen ***Oh Heeba Habba GOoba Gabba (Message 1604965)
Posted 24 Nov 2014 by Profile Bhagwanmike
Post:
Do you ever write in English? Just asking.
17) Message boards : Number crunching : CLOSED** SETI/BOINC Milestones [ v2.0 ] - XXVIII **CLOSED (Message 1592759)
Posted 27 Oct 2014 by Profile Bhagwanmike
Post:
Pretty bloody amazing!! Congratulations are certainly in order!
18) Message boards : Number crunching : CLOSED** SETI/BOINC Milestones [ v2.0 ] - XXVIII **CLOSED (Message 1590141)
Posted 22 Oct 2014 by Profile Bhagwanmike
Post:
Happy to report crossing 4 million on SETI, and have dedicated the new machine to getting to 5 as quickly as possible. It will be easier now that it is getting cooler; the i7 990 and GTX 590 are real space heaters!!
19) Message boards : Number crunching : cpu heatsink/fan (Message 1585847)
Posted 12 Oct 2014 by Profile Bhagwanmike
Post:
Install manual at link:

http://www.coolermaster.com/xresserver01-DLFILE-P130607000186b8-F130607000241d5.html

has installs for combined LGA 1366/1156/1155/1150/775, and some separate
instructions for LGA 2011.

Hope this helps.

Also remember your case and RAM clearances, too!
20) Message boards : Number crunching : cpu heatsink/fan (Message 1585845)
Posted 12 Oct 2014 by Profile Bhagwanmike
Post:
Hi there,

Site specs from Cooler Master are as follows:

Model RR-V8VC-16PR-R1
CPU Socket Intel® LGA 2011-3/2011/1366/1156/1155/1150/775
AMD FM2+/FM2/FM1/AM3+/AM3 /AM2
Dimensions (LxWxH) 154 x 149.8 x 166.5mm (6.1 x 5.9 x 6.6 in)
Heat Sink Dimensions (LxWxH) 154 x 140 x 153.5mm (6.1 x 5.5 x 6.0 in)
Heat Sink Material Vapor Chamber / 8 Heat Pipes / Aluminum Fins
Heat Sink Weight 854g (1.9lb)
Heat Pipe Dimensions Ø6mm
Fan Dimensions Ø 140 x 20 mm (5.5 x 0.8 inch)
Fan Speed 600 – 1,600 RPM (PWM) ± 10%
Fan Air Flow 28 – 82 CFM ± 10%
Fan Air Pressure 0. 3 – 1.45 mmH2O ± 10%
Fan Life Expectancy 160,000 hrs
Noise Level 16~36 dBA
Bearing Type POM bearing – Cooler Master 4th Gen. Bearing (*POM = Polyoxymethylene)
Connector 4-Pin
Rated Voltage 12 VDC
Rated Current 0.31A
Power Consumption 3.72W
Fan Weight 110g (0.24 lb) x 2


Next 20


 
©2018 University of California
 
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.