Questions and Answers :
Windows :
What happened to my CPU'S?
Message board moderation
Previous · 1 · 2 · 3
Author | Message |
---|---|
dagmardan Send message Joined: 22 Oct 02 Posts: 19 Credit: 2,688,034 RAC: 11 |
Bonze82: Some purchases are from Amazon and some from Newegg. Computer one is an = AMD Ryzen 7 2700X 8-Core 3.7 GHz (4.3 GHz Max Boost) Socket AM4. ( from Amazon) 2. ASUS AM4 TUF GAMING X570-Plus ATX Motherboard with PCIe 4.0, Dual M.2, 12+2 with Dr. MOS Power Stage, HDMI, DP, SATA 6 Gb/s, USB 3.2 Gen 2 and Aura Sync RGB Lighting ( copied and pasted from Newegg web site) 3. Corsair Force MP600 M.2 2280 1TB PCI-Express Gen 4.0 x4 NVMe 3D TLC Internal Solid State Drive (SSD) 4. Corsair Vengeance RGB PRO 16GB (2x8GB) DDR4 3200MHz( believe this is what i have in the x570 i can't remember) 5. I can't find the graphics card on website but it is an Radeon rx550 4 GB GDDR 5. Computer 2= AMD 2nd Gen Ryzen Threadripper 24-Core, 48-Thread, 2970WX 4.2 GHz Max Boost (3.0 GHz Base), Socket sTR4. 2. ASUS ROG Strix X399-E Gaming sTR4 AMD X399 SATA 6Gb/s USB 3.1 Extended ATX AMD Motherboard 3. Corsair Vengeance RGB PRO 16GB (2x8GB) DDR4 3200MHz ( i have 4 intalled =32gb) 4. Corsair Force MP600 M.2 2280 1TB PCI-Expre ss Gen 4.0 x4 NVMe 3D TLC Internal Solid State Drive (SSD) CSSD-F1000GBMP60 and 3 Sata drives that won't work on these boards. 5. XFX RX-570P8DFD6 Radeon RX 570 RS XXX Edition 1286MHz, 8gb GDDR5, DX12 VR Ready, Dual BIOS, 3xDP HDMI DVI, AMD That's all folks. Jake. |
dagmardan Send message Joined: 22 Oct 02 Posts: 19 Credit: 2,688,034 RAC: 11 |
I will give it a shot. Thanks. |
dagmardan Send message Joined: 22 Oct 02 Posts: 19 Credit: 2,688,034 RAC: 11 |
Grant: NO yellow , all 3 are are clear. Under General it says " this device is working properly" Under DETAILS " Standard SATA AHCI Controller" I give up. LOL |
Grant (SSSF) Send message Joined: 19 Aug 99 Posts: 13854 Credit: 208,696,464 RAC: 304 |
Grant: NO yellow , all 3 are are clear. Under General it says " this device is working properly" Under DETAILS " Standard SATA AHCI Controller" So, as i posted in my previous post- Have you tried a different SATA port on the motherboard? On my motherboard, when using an M.2 drive it means one of the SATA ports is no long usable. The only other thing that comes to mind would be to try a different power supply (or at least a different SATA power connector). If the controller on the motherboard is OK (which it appears to be) the only things left are the drive, the data lead, or the power to the drive- or the port on the motherboard being used has an issue. Maybe try them all? A dodgy port OK, but no way all of them would be dead if the controller itself is OK. Edit- Looking at the manual for the Strix X399-E Gaming sTR4, the extra lanes the CPU supports means the M.2 drive doesn't reduce the number of usable SATA ports. So i'd try a couple of others to see if they will get the HDD recognised. As i said- if the controller is OK (which the OS considers it to be) the problem then can only be the data lead, the HDD, it's power supply, or the port on the motherboard. And the odds of all the ports on the motherboard being dead, and the controller OK, are pretty damn remote. Grant Darwin NT |
Grant (SSSF) Send message Joined: 19 Aug 99 Posts: 13854 Credit: 208,696,464 RAC: 304 |
3. Corsair Vengeance RGB PRO 16GB (2x8GB) DDR4 3200MHz ( i have 4 intalled =32gb) Only 16GB showing on the BOINC info there, but that seems to be a BOINC issue- my system with 32GB of RAM only shows up as 16GB in the project system specs also. Threadrippers are Quad channel boards, so with 4 DIMMs, 4 slots will still be empty so you need to make sure they are in the right slots to get maximum memory performance and enable Quad channel mode- which appears to be the light coloured DIMM slots. 2 on one side of the CPU, 2 on the other. Grant Darwin NT |
bonze82 Send message Joined: 31 May 03 Posts: 6 Credit: 180,493 RAC: 8 |
Do the drives show up in the bios...if not are the ports disabled or set to raid instead of ahci. |
dagmardan Send message Joined: 22 Oct 02 Posts: 19 Credit: 2,688,034 RAC: 11 |
Do the drives show up in the bios...if not are the ports disabled or set to raid instead of ahci. They do not show up in the bios, everything is set at default, and no overclocking , all sata ports are enabled and default set at ACHI. |
©2024 University of California
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.