SETI orphans

Message boards : Number crunching : SETI orphans
Message board moderation

To post messages, you must log in.

Previous · 1 . . . 35 · 36 · 37 · 38 · 39 · 40 · 41 . . . 43 · Next

AuthorMessage
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 2086689 - Posted: 22 Oct 2021, 23:26:58 UTC

@ Ian

. . Well it's been fun. The weather is entering the too hot to handle season, 28 C overnight and up to 35 C during the day in the computer room. The hottest machine doesn't budge far from the 80C mark so I have already shut it down. The other machines might last out the month but no longer I fear.

. . Did the boffins take any notice of the results on Maxwell cards. I would like to think it made some difference by getting them running v1.28.

Stephen
ID: 2086689 · Report as offensive     Reply Quote
Profile tullio
Volunteer tester

Send message
Joined: 9 Apr 04
Posts: 8797
Credit: 2,930,782
RAC: 1
Italy
Message 2086706 - Posted: 23 Oct 2021, 12:34:44 UTC

Crunching for World Community Grid, now managed by Krembil Research Institute, Ontario, Canada, Its project, Mapping CancerMarkers, is mostly what I get. Coincidence?
Tullio
ID: 2086706 · Report as offensive     Reply Quote
alanb1951 Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor

Send message
Joined: 25 May 99
Posts: 10
Credit: 6,904,127
RAC: 34
United Kingdom
Message 2086707 - Posted: 23 Oct 2021, 12:42:20 UTC - in response to Message 2086706.  

Crunching for World Community Grid, now managed by Krembil Research Institute, Ontario, Canada, Its project, Mapping CancerMarkers, is mostly what I get. Coincidence?
Tullio

Nope - it is easily explained... There's an enormous amount of MCM1 work to be done, and if you don't have any control over the workload mix you'll tend to get MCM1, then OPN1, then whatever else might be available... And it was like that long before the [still ongoing] transfer from IBM to Krembil :-)

Users with conventional BOINC accounts on WCG can tune the amount of each project type they receive - however, I don't know whether that's possible for those connecting via Science United...

Cheers - Al.
ID: 2086707 · Report as offensive     Reply Quote
Ian&Steve C.
Avatar

Send message
Joined: 28 Sep 99
Posts: 4267
Credit: 1,282,604,591
RAC: 6,640
United States
Message 2086717 - Posted: 23 Oct 2021, 14:00:19 UTC - in response to Message 2086689.  

not yet, waiting for a reply
Seti@Home classic workunits: 29,492 CPU time: 134,419 hours

ID: 2086717 · Report as offensive     Reply Quote
Speedy
Volunteer tester
Avatar

Send message
Joined: 26 Jun 04
Posts: 1643
Credit: 12,921,799
RAC: 89
New Zealand
Message 2086773 - Posted: 24 Oct 2021, 2:44:56 UTC - in response to Message 2086706.  

Out of curiosity do you get any GPU work along the way? It would be awesome if it was possible to make a GPU app for Mapping Cancer Makers, it would certainly help the project along nicely. I wonder if they would run into the same situation as the current GPU project? We will only find this out if an app is made
ID: 2086773 · Report as offensive     Reply Quote
Profile tullio
Volunteer tester

Send message
Joined: 9 Apr 04
Posts: 8797
Credit: 2,930,782
RAC: 1
Italy
Message 2086791 - Posted: 24 Oct 2021, 17:11:09 UTC - in response to Message 2086773.  

Out of curiosity do you get any GPU work along the way? It would be awesome if it was possible to make a GPU app for Mapping Cancer Makers, it would certainly help the project along nicely. I wonder if they would run into the same situation as the current GPU project? We will only find this out if an app is made

I am getting vey few OPNG tasks on my GTX 1060.
Tullio
ID: 2086791 · Report as offensive     Reply Quote
Speedy
Volunteer tester
Avatar

Send message
Joined: 26 Jun 04
Posts: 1643
Credit: 12,921,799
RAC: 89
New Zealand
Message 2086803 - Posted: 24 Oct 2021, 21:11:29 UTC - in response to Message 2086791.  

Out of curiosity do you get any GPU work along the way? It would be awesome if it was possible to make a GPU app for Mapping Cancer Makers, it would certainly help the project along nicely. I wonder if they would run into the same situation as the current GPU project? We will only find this out if an app is made

I am getting vey few OPNG tasks on my GTX 1060.
Tullio

Thanks for the feedback. It's nice to know it's not just me. :)
ID: 2086803 · Report as offensive     Reply Quote
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 2086824 - Posted: 25 Oct 2021, 3:02:36 UTC - in response to Message 2086717.  

not yet, waiting for a reply


. . OK Ian, thanks for the response.

Stephen
ID: 2086824 · Report as offensive     Reply Quote
Ian&Steve C.
Avatar

Send message
Joined: 28 Sep 99
Posts: 4267
Credit: 1,282,604,591
RAC: 6,640
United States
Message 2086885 - Posted: 26 Oct 2021, 13:48:38 UTC - in response to Message 2086824.  

not yet, waiting for a reply


. . OK Ian, thanks for the response.

Stephen


Bernd just replied and stated that he has opened up the scheduler to allow Maxwell cards to get the new app.
Seti@Home classic workunits: 29,492 CPU time: 134,419 hours

ID: 2086885 · Report as offensive     Reply Quote
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 2086930 - Posted: 27 Oct 2021, 8:39:58 UTC - in response to Message 2086885.  
Last modified: 27 Oct 2021, 8:41:09 UTC

Bernd just replied and stated that he has opened up the scheduler to allow Maxwell cards to get the new app.



. . (doing my best Mr Burns impression) ... Excellent!!!

. . Some people out there are going to get a pleasant surprise when their old Nvidia cards are suddenly matching the AMI units ... :)

Stephen
ID: 2086930 · Report as offensive     Reply Quote
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 2087160 - Posted: 31 Oct 2021, 12:41:57 UTC

. . FWIW I have fun a couple of 9xx series wingmen but they still seem to be running v1.22. :(

Stephen
ID: 2087160 · Report as offensive     Reply Quote
Ian&Steve C.
Avatar

Send message
Joined: 28 Sep 99
Posts: 4267
Credit: 1,282,604,591
RAC: 6,640
United States
Message 2087161 - Posted: 31 Oct 2021, 12:45:45 UTC - in response to Message 2087160.  

. . FWIW I have fun a couple of 9xx series wingmen but they still seem to be running v1.22. :(

Stephen


if they have a large cache, it could take some time before the 1.28 comes into rotation.

also the delivery of the app still depends on having the right driver and openCL version. if they don't have newer drivers, they wont get the new app
Seti@Home classic workunits: 29,492 CPU time: 134,419 hours

ID: 2087161 · Report as offensive     Reply Quote
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 2087207 - Posted: 1 Nov 2021, 6:48:41 UTC - in response to Message 2087161.  
Last modified: 1 Nov 2021, 7:01:31 UTC

if they have a large cache, it could take some time before the 1.28 comes into rotation.

also the delivery of the app still depends on having the right driver and openCL version. if they don't have newer drivers, they wont get the new app


. . After posting that it occurred to me to check what sort of workload they were carrying. Both seemed to be the kind of hosts that run workfetch at something like 20 days. So even with the right drivers it would be weeks before their results showed the new app. I have found a good host (thank you Harri), running a similar unit to myself with two GTX970's and apparently running the right drivers and a sensible workfetch, who began getting the new app partway through Wednesday the 26th. His rig is looking good. Well done Berndt. Maybe a little notice somewhere to let Maxwell users know that they should update their drivers if they want to improve the efficiency of their GPUs. :)

Stephen

PS I picked up some new fans for my rig with the 970s. The rear fan bearing had seized completely and it was just blocking the vent opening so I had removed it, but the 2 front fans are pretty sickly as well, literally 'limping'* and not being very helpful. So I am replacing them all with nice new Corsair MagLev fans, with higher air flow rates and static pressures. The rear is staying at 120mm because that is all it can mount, but the new front fans are 140mm up from 120mm. I am hoping the improved air flow will allow me to continue running that unit for a while longer.

*the fans are slowing down for no reason and then spinning back up so I am sure their bearings are about to die as well.

. . While things are in pieces I will remove the GPU cowlings as well and make sure their heat sinks are not clogged with dust. Every little bit helps.
ID: 2087207 · Report as offensive     Reply Quote
Grant (SSSF)
Volunteer tester

Send message
Joined: 19 Aug 99
Posts: 13833
Credit: 208,696,464
RAC: 304
Australia
Message 2087208 - Posted: 1 Nov 2021, 7:52:43 UTC - in response to Message 2087207.  

.... So I am replacing them all with nice new Corsair MagLev fans, with higher air flow rates and static pressures.
Good fans.
I've replaced both front fans in both of my cases with ML140s, and was able to move the existing 140mm front fans to replace the 120mm rear fan. That & setting the case fans to be controlled by the VRM (Voltage Regulator Module) temperatures, dropped the temperatures in the case (and the VRM) by several degrees, even when the ambient temperatures are up in the high 30s (°c).
They are noisier than the original fans, but the drop in temperature is well worth the extra noise.
Grant
Darwin NT
ID: 2087208 · Report as offensive     Reply Quote
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 2087300 - Posted: 2 Nov 2021, 5:50:04 UTC - in response to Message 2087208.  

Good fans.
I've replaced both front fans in both of my cases with ML140s, and was able to move the existing 140mm front fans to replace the 120mm rear fan. That & setting the case fans to be controlled by the VRM (Voltage Regulator Module) temperatures, dropped the temperatures in the case (and the VRM) by several degrees, even when the ambient temperatures are up in the high 30s (°c).
They are noisier than the original fans, but the drop in temperature is well worth the extra noise.


. . Hi Grant,
. . Thanks for that feedback. The noise spec (37dba) was worrying but the temp is the main issue. If I can get the temps down by a few degrees it will be worth it.

Stephen
ID: 2087300 · Report as offensive     Reply Quote
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13164
Credit: 1,160,866,277
RAC: 1,873
United States
Message 2087301 - Posted: 2 Nov 2021, 6:51:18 UTC - in response to Message 2087300.  

Just dropping the ML140 fan rpm's to 1700-1800 from their full blast 2000 rpm knocks the offending whine noise down to tolerable and doesn't really diminish their air moving capability.
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 2087301 · Report as offensive     Reply Quote
Ian&Steve C.
Avatar

Send message
Joined: 28 Sep 99
Posts: 4267
Credit: 1,282,604,591
RAC: 6,640
United States
Message 2087326 - Posted: 2 Nov 2021, 16:41:34 UTC

#teamnoctua ;P
Seti@Home classic workunits: 29,492 CPU time: 134,419 hours

ID: 2087326 · Report as offensive     Reply Quote
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13164
Credit: 1,160,866,277
RAC: 1,873
United States
Message 2087327 - Posted: 2 Nov 2021, 16:42:57 UTC - in response to Message 2087326.  

#teamnoctua ;P

+1
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 2087327 · Report as offensive     Reply Quote
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 2087374 - Posted: 3 Nov 2021, 7:05:56 UTC - in response to Message 2087301.  

Just dropping the ML140 fan rpm's to 1700-1800 from their full blast 2000 rpm knocks the offending whine noise down to tolerable and doesn't really diminish their air moving capability.


. . I will give that a try, thanks Keith. But after the noise of the grime encrusted old fans with their shot bearings the new ones are a pleasure :) Also I was pleasantly surprised to find that cleaning the fans on the 970s has rendered them somewhat quieter too. But best of all the hot 970 is now running almost 10 C cooler ..... yay!

Stephen
ID: 2087374 · Report as offensive     Reply Quote
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 2087375 - Posted: 3 Nov 2021, 7:09:57 UTC - in response to Message 2087326.  
Last modified: 3 Nov 2021, 7:10:39 UTC

#teamnoctua ;P


. Hi Ian,
. . I considered the Noctua option because they are good fans, I am using a 90mm Noctua in another rig. But when I was window shopping I discovered I could get the 2 x Corsair 140mms for less than 1 x 140mm Noctua. That sold me :).

Stephen
ID: 2087375 · Report as offensive     Reply Quote
Previous · 1 . . . 35 · 36 · 37 · 38 · 39 · 40 · 41 . . . 43 · Next

Message boards : Number crunching : SETI orphans


 
©2024 University of California
 
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.