Message boards :
Number crunching :
The Server Issues / Outages Thread - Panic Mode On! (117)
Message board moderation
Previous · 1 . . . 43 · 44 · 45 · 46 · 47 · 48 · 49 . . . 52 · Next
Author | Message |
---|---|
Grant (SSSF) Send message Joined: 19 Aug 99 Posts: 13854 Credit: 208,696,464 RAC: 304 |
Unable to contact the Scheduler again, 21/12/2019 08:29:56 | SETI@home | Scheduler request failed: HTTP internal server error and :Timeout was reached. The large number of shorties going through at the moment won't be helping matters either. Grant Darwin NT |
Tom M Send message Joined: 28 Nov 02 Posts: 5126 Credit: 276,046,078 RAC: 462 |
I just switched one of my Weekend Warriors to "all cpu" with a dinky little gpu on there that has no hope of processing most anything. What do I get? "Project down" try again in an hour. Reminds me of "all dressed up and no place to go". Tom A proud member of the OFA (Old Farts Association). |
betreger Send message Joined: 29 Jun 99 Posts: 11416 Credit: 29,581,041 RAC: 66 |
Well it won't let me report completed tasks, sometimes it says it may be down, or it says it can't connect to server. |
juan BFP Send message Joined: 16 Mar 07 Posts: 9786 Credit: 572,710,851 RAC: 3,799 |
Well it won't let me report completed tasks, sometimes it says it may be down, or it says it can't connect to server. i offer to do the sacrifice.... Again. |
wujj123456 Send message Joined: 5 Sep 04 Posts: 40 Credit: 20,877,975 RAC: 219 |
I see that they brought the missing validators back up again after they were down. Don't see any improvement on validation tasks outstanding. They really need to whittle that down to something manageable. I haven't been able to pull up any task web page on any of my hosts since the outage. Don't know if the hosts are doing OK or not. Hmm, I couldn't get tasks either, but I have no problem visiting my host task page like this one: https://setiathome.berkeley.edu/results.php?hostid=8846357. I don't have as many tasks as you guys do though. |
Grant (SSSF) Send message Joined: 19 Aug 99 Posts: 13854 Credit: 208,696,464 RAC: 304 |
The large number of shorties going through at the moment won't be helping matters either.Results-received-in-last-hour 186,386- much more than 140k often causes issues. But that many, on top of the existing problems? No wonder the system has choked up. At least the return rate will drop off with people unable to contact the Scheduler, then of course go through the roof again when they can, but hopefully by then some of the other backlogs will have cleared. Grant Darwin NT |
Speedy Send message Joined: 26 Jun 04 Posts: 1643 Credit: 12,921,799 RAC: 89 |
If you want to help this situation the best thing to do would be to have a look through your task list and see if you have any ending with _2 or higher and return these so that "work waiting to be administered" can drop. I am aware this is not possible for everybody. Just my 2 cents. |
Jimbocous Send message Joined: 1 Apr 13 Posts: 1856 Credit: 268,616,081 RAC: 1,349 |
If you want to help this situation the best thing to do would be to have a look through your task list and see if you have any ending with _2 or higher and return these so that "work waiting to be administered" can drop. I am aware this is not possible for everybody. Just my 2 cents.No clue here how I could select tasks to prioritize reporting... |
Speedy Send message Joined: 26 Jun 04 Posts: 1643 Credit: 12,921,799 RAC: 89 |
If you want to help this situation the best thing to do would be to have a look through your task list and see if you have any ending with _2 or higher and return these so that "work waiting to be administered" can drop. I am aware this is not possible for everybody. Just my 2 cents.No clue here how I could select tasks to prioritize reporting... On Windows you have to select the tasks then on the left-hand side you will see an option saying suspend. So suspend all tasks and then click each task that has _2 or higher and then click resume. The suspend/resume button is located under the graphics button. I imagine it would be a similar process using the graphical interface on Linux. Of course after they are all processed you will need to resume the other work units |
Wiggo Send message Joined: 24 Jan 00 Posts: 36786 Credit: 261,360,520 RAC: 489 |
If you want to help this situation the best thing to do would be to have a look through your task list and see if you have any ending with _2 or higher and return these so that "work waiting to be administered" can drop. I am aware this is not possible for everybody. Just my 2 cents.Now that's easier said than done Speedy for some of us and seeing as I go through my GPU cache in 9-10hrs anyway the time required for me to go through all those tasks just isn't worth it. Even just doing the CPU tasks I consider a waste of time when they'll be returned in 2-3 days anyway ;-) Though that'll work ok I guess for those with slower rigs using a minimal cache or those like yourself who share their time around other projects as well and not the straight out SETI only with the 3/0.1 day setting that I'm currently using. Once I get my personal experiments done with here I will initiate my "back up only projects" again, but not until then. Cheers. |
Stephen "Heretic" Send message Joined: 20 Sep 12 Posts: 5557 Credit: 192,787,363 RAC: 628 |
If you want to help this situation the best thing to do would be to have a look through your task list and see if you have any ending with _2 or higher and return these so that "work waiting to be administered" can drop. I am aware this is not possible for everybody. Just my 2 cents.No clue here how I could select tasks to prioritize reporting... . . Select all tasks with _0 or _1 at the end and suspend them, then when the _2 and above WUs are crunched unfreeze the others and let it report the completed units. If you want to go to that trouble. It should help clear some older tasks hanging around though. Stephen . . |
Speedy Send message Joined: 26 Jun 04 Posts: 1643 Credit: 12,921,799 RAC: 89 |
Thanks Wingo I completely understand. All the best with your goals |
Grant (SSSF) Send message Joined: 19 Aug 99 Posts: 13854 Credit: 208,696,464 RAC: 304 |
Linux system out of GPU work. Occasionally contacting the Scheduler, but "Project has no tasks available" is the response. Grant Darwin NT |
Stephen "Heretic" Send message Joined: 20 Sep 12 Posts: 5557 Credit: 192,787,363 RAC: 628 |
Linux system out of GPU work. . . I notice you have not implemented the spoofed client ... Stephen ? ? |
Grant (SSSF) Send message Joined: 19 Aug 99 Posts: 13854 Credit: 208,696,464 RAC: 304 |
I notice you have not implemented the spoofed clientGave it a go, couldn't get it to run, went back to what worked. Probably needed to set the permissions for the new files. Grant Darwin NT |
Stephen "Heretic" Send message Joined: 20 Sep 12 Posts: 5557 Credit: 192,787,363 RAC: 628 |
I notice you have not implemented the spoofed clientGave it a go, couldn't get it to run, went back to what worked. Probably needed to set the permissions for the new files. . . Maybe it was a permissions thing but maybe it was the dependencies. The reason that I only have it running on one of my major systems is that it was the only one already running libcurl4.0 (I think that is the dependency missing on the other 3 rigs). . . If you go to the directory in which the spoof version files are stored and type sudo ldd and the filename (boinc, boinccmd, boincmgr) it will list all the dependencies and show any that are missing. There was only the same one missing on all of the other three rigs so I hesitated updating that file in case I needed to roll back. With the new limits the 2 slower rigs are AOK now anyway but I really should get it working on the highest performer to ensure its continued operation. Stephen . . |
Jimbocous Send message Joined: 1 Apr 13 Posts: 1856 Credit: 268,616,081 RAC: 1,349 |
. . If you go to the directory in which the spoof version files are stored and type sudo ldd and the filename (boinc, boinccmd, boincmgr) it will list all the dependencies and show any that are missing. There was only the same one missing on all of the other three rigs so I hesitated updating that file in case I needed to roll back. With the new limits the 2 slower rigs are AOK now anyway but I really should get it working on the highest performer to ensure its continued operation.Probably so. I did need a sudo apt install libcurl4 on mine. |
halfempty Send message Joined: 2 Jun 99 Posts: 97 Credit: 35,236,901 RAC: 114 |
First I was getting these: Scheduler request completed: got 0 new tasks Project has no tasks available Now it's this: Scheduler request failed: Couldn't connect to server Project communication failed: attempting access to reference site Internet access OK - project servers may be temporarily down. But the rest of the site is working fine. Is there something I can do? (Other than PANIC) |
Tom M Send message Joined: 28 Nov 02 Posts: 5126 Credit: 276,046,078 RAC: 462 |
First I was getting these: A proud member of the OFA (Old Farts Association). |
Grant (SSSF) Send message Joined: 19 Aug 99 Posts: 13854 Credit: 208,696,464 RAC: 304 |
Not too sure about the server status page numbers. It shows a return rate of 144k, but it's been over 4 hours since either of my systems were able to contact the Scheduler & get a response that wasn't one type of an error or another. Grant Darwin NT |
©2024 University of California
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.