Some tasks postponing...

Message boards : Number crunching : Some tasks postponing...
Message board moderation

To post messages, you must log in.

AuthorMessage
Loren Datlof

Send message
Joined: 24 Jan 14
Posts: 73
Credit: 19,652,385
RAC: 0
United States
Message 1997071 - Posted: 6 Jun 2019, 18:50:17 UTC
Last modified: 6 Jun 2019, 19:04:13 UTC

I have noticed that WUs starting with numbers like 15fe, 15ap, 12jl and 12mr run for about 15 seconds and then are postponed on my t1700 machine. The WUs starting with blc26 run all the way to completion. I have had to suspend those postponed task to get a blc26 WU to start.

The computer is running Ubuntu 18.04.2 LTS (4.15.0-51-generic) and I am using the Beta SOG app for the GPU's.

The only thing I changed was going from 50% to 25% CPU use through Boinc Manager. I have subsequently changed it back to 50% and restarted BOINC but no dice.

Anyone have any ideas how to fix this?
ID: 1997071 · Report as offensive
Profile Unixchick Project Donor
Avatar

Send message
Joined: 5 Mar 12
Posts: 815
Credit: 2,361,516
RAC: 22
United States
Message 1997073 - Posted: 6 Jun 2019, 18:58:53 UTC - in response to Message 1997071.  

Does it say anything useful in the event log?
ID: 1997073 · Report as offensive
Loren Datlof

Send message
Joined: 24 Jan 14
Posts: 73
Credit: 19,652,385
RAC: 0
United States
Message 1997075 - Posted: 6 Jun 2019, 19:03:48 UTC - in response to Message 1997073.  

Does it say anything useful in the event log?

Not that I can see

Thu 06 Jun 2019 11:27:36 AM PDT | SETI@home | Task 12jl12ab.17477.81727.10.37.195_1 postponed for 30 seconds:
Thu 06 Jun 2019 11:27:52 AM PDT | SETI@home | Task 15ap10ab.29110.4161.4.31.14_0 postponed for 30 seconds:
Thu 06 Jun 2019 11:28:06 AM PDT | SETI@home | Task 12mr09aa.24054.23794.9.36.36_0 postponed for 30 seconds:
Thu 06 Jun 2019 11:28:23 AM PDT | SETI@home | Task 12jl12ab.17477.81727.10.37.195_1 postponed for 30 seconds:
Thu 06 Jun 2019 11:28:39 AM PDT | SETI@home | Task 15ap10ab.29110.4161.4.31.14_0 postponed for 30 seconds:
Thu 06 Jun 2019 11:28:54 AM PDT | SETI@home | Task 12mr09aa.24054.23794.9.36.36_0 postponed for 30 seconds:
Thu 06 Jun 2019 11:29:11 AM PDT | SETI@home | Task 12jl12ab.17477.81727.10.37.195_1 postponed for 30 seconds:
Thu 06 Jun 2019 11:29:27 AM PDT | SETI@home | Task 15ap10ab.29110.4161.4.31.14_0 postponed for 30 seconds:
Thu 06 Jun 2019 11:29:41 AM PDT | SETI@home | Task 12mr09aa.24054.23794.9.36.36_0 postponed for 30 seconds:
Thu 06 Jun 2019 11:29:58 AM PDT | SETI@home | Task 12jl12ab.17477.81727.10.37.195_1 postponed for 30 seconds:
Thu 06 Jun 2019 11:30:14 AM PDT | SETI@home | Task 15ap10ab.29110.4161.4.31.14_0 postponed for 30 seconds:
Thu 06 Jun 2019 11:30:28 AM PDT | SETI@home | Task 12mr09aa.24054.23794.9.36.36_0 postponed for 30 seconds:
Thu 06 Jun 2019 11:30:45 AM PDT | SETI@home | Task 12jl12ab.17477.81727.10.37.195_1 postponed for 30 seconds:
Thu 06 Jun 2019 11:31:01 AM PDT | SETI@home | Task 15ap10ab.29110.4161.4.31.14_0 postponed for 30 seconds:
Thu 06 Jun 2019 11:31:15 AM PDT | SETI@home | Task 12mr09aa.24054.23794.9.36.36_0 postponed for 30 seconds:
Thu 06 Jun 2019 11:31:33 AM PDT | SETI@home | Task 12jl12ab.17477.81727.10.37.195_1 postponed for 30 seconds:
Thu 06 Jun 2019 11:31:49 AM PDT | SETI@home | Task 15ap10ab.29110.4161.4.31.14_0 postponed for 30 seconds:
Thu 06 Jun 2019 11:32:03 AM PDT | SETI@home | Task 12mr09aa.24054.23794.9.36.36_0 postponed for 30 seconds:
Thu 06 Jun 2019 11:32:20 AM PDT | SETI@home | Task 12jl12ab.17477.81727.10.37.195_1 postponed for 30 seconds:
Thu 06 Jun 2019 11:32:36 AM PDT | SETI@home | Task 15ap10ab.29110.4161.4.31.14_0 postponed for 30 seconds:
Thu 06 Jun 2019 11:32:50 AM PDT | SETI@home | Task 12mr09aa.24054.23794.9.36.36_0 postponed for 30 seconds:
Thu 06 Jun 2019 11:33:07 AM PDT | SETI@home | Task 12jl12ab.17477.81727.10.37.195_1 postponed for 30 seconds:
Thu 06 Jun 2019 11:33:23 AM PDT | SETI@home | Task 15ap10ab.29110.4161.4.31.14_0 postponed for 30 seconds:
ID: 1997075 · Report as offensive
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13161
Credit: 1,160,866,277
RAC: 1,873
United States
Message 1997080 - Posted: 6 Jun 2019, 19:33:51 UTC

My guess is the compute kernel primitives are corrupted. I would exit BOINC and delete all the files in the ComputeCache folder and then restart BOINC. The ComputeCache is here in Ubuntu 18.04.

/home/{username}/.nv/ComputeCache

The .nv directory is a hidden directory. You can view it by turning on Show Hidden Files in the File Manager hamburger menu.

The gpu app will recreate all the primitives once it starts crunching again and that should clear up the too many exits.
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 1997080 · Report as offensive
Loren Datlof

Send message
Joined: 24 Jan 14
Posts: 73
Credit: 19,652,385
RAC: 0
United States
Message 1997081 - Posted: 6 Jun 2019, 19:57:18 UTC - in response to Message 1997080.  

I deleted all files and folders in ComputeCache folder and the postponing problem still persists. BTW the ComputeCache folder was here: /var/lib/boinc-client/.nv/ and not in the home directory. The contents of the ComputeCache folder:

/var/lib/boinc-client/.nv/ComputeCache# ls
0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f  index


Also this is a headless system so I have to ssh into the computer using the terminal.
ID: 1997081 · Report as offensive
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13161
Credit: 1,160,866,277
RAC: 1,873
United States
Message 1997083 - Posted: 6 Jun 2019, 20:02:23 UTC - in response to Message 1997081.  

OK, didn't know you were running the repo client or were headless. Reinstall the graphics drivers if deleting the compute cache didn't work.
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 1997083 · Report as offensive
Loren Datlof

Send message
Joined: 24 Jan 14
Posts: 73
Credit: 19,652,385
RAC: 0
United States
Message 1997090 - Posted: 6 Jun 2019, 20:48:11 UTC - in response to Message 1997083.  
Last modified: 6 Jun 2019, 20:48:43 UTC

Ok. I upgraded from 390 to 430 (I probably should have just reinstalled 390) and when I restarted boinc I got a missing .cl file error. I aborted the WUs and of course I am in the penalty box. I will keep you updated when I get some GPU WUs.
ID: 1997090 · Report as offensive
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13161
Credit: 1,160,866,277
RAC: 1,873
United States
Message 1997093 - Posted: 6 Jun 2019, 21:17:08 UTC - in response to Message 1997090.  

Ok. I upgraded from 390 to 430 (I probably should have just reinstalled 390) and when I restarted boinc I got a missing .cl file error. I aborted the WUs and of course I am in the penalty box. I will keep you updated when I get some GPU WUs.

Shouldn't have aborted, just stopped BOINC and installed the OpenCL drivers. For some reason, some people don't get the full meta package of the new drivers that is missing the OpenCL components. All you have to do is install them with:

sudo apt-get install ocl-icd-libopencl1

Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 1997093 · Report as offensive
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13161
Credit: 1,160,866,277
RAC: 1,873
United States
Message 1997106 - Posted: 6 Jun 2019, 23:41:33 UTC

Since I hate dumping work because of a simple oversight, I always run clinfo after any changes to the system to verify both the CUDA and OpenCL drivers are present before I fire up BOINC.
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 1997106 · Report as offensive
Loren Datlof

Send message
Joined: 24 Jan 14
Posts: 73
Credit: 19,652,385
RAC: 0
United States
Message 1997141 - Posted: 7 Jun 2019, 5:54:57 UTC - in response to Message 1997093.  

Ok. I upgraded from 390 to 430 (I probably should have just reinstalled 390) and when I restarted boinc I got a missing .cl file error. I aborted the WUs and of course I am in the penalty box. I will keep you updated when I get some GPU WUs.

Shouldn't have aborted, just stopped BOINC and installed the OpenCL drivers. For some reason, some people don't get the full meta package of the new drivers that is missing the OpenCL components. All you have to do is install them with:

sudo apt-get install ocl-icd-libopencl1


I tiried to install it and it came back I already have the newest version. I must have gotten it when I installed 430.
I installed clinfo.

Meanwhile I am still in the penalty box...
ID: 1997141 · Report as offensive
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13161
Credit: 1,160,866,277
RAC: 1,873
United States
Message 1997148 - Posted: 7 Jun 2019, 7:35:53 UTC - in response to Message 1997141.  

I tiried to install it and it came back I already have the newest version. I must have gotten it when I installed 430.
I installed clinfo.


So what does the output of clinfo show for your OpenCL driver component? Look at the end of the output in the Terminal window for the status of OpenCL.
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 1997148 · Report as offensive
Loren Datlof

Send message
Joined: 24 Jan 14
Posts: 73
Credit: 19,652,385
RAC: 0
United States
Message 1997185 - Posted: 7 Jun 2019, 13:33:51 UTC - in response to Message 1997148.  
Last modified: 7 Jun 2019, 14:18:05 UTC

sudo apt-get install ocl-icd-libopencl1
Reading package lists... Done
Building dependency tree       
Reading state information... Done
ocl-icd-libopencl1 is already the newest version (2.2.11-1ubuntu1).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.


clinfo
NULL platform behavior
  clGetPlatformInfo(NULL, CL_PLATFORM_NAME, ...)  No platform
  clGetDeviceIDs(NULL, CL_DEVICE_TYPE_ALL, ...)   No platform
  clCreateContext(NULL, ...) [default]            No platform
  clCreateContext(NULL, ...) [other]              Success [NV]
  clCreateContextFromType(NULL, CL_DEVICE_TYPE_DEFAULT)  No platform
  clCreateContextFromType(NULL, CL_DEVICE_TYPE_CPU)  No platform
  clCreateContextFromType(NULL, CL_DEVICE_TYPE_GPU)  No platform
  clCreateContextFromType(NULL, CL_DEVICE_TYPE_ACCELERATOR)  No platform
  clCreateContextFromType(NULL, CL_DEVICE_TYPE_CUSTOM)  No platform
  clCreateContextFromType(NULL, CL_DEVICE_TYPE_ALL)  No platform


nvcc --version
nvcc: NVIDIA (R) Cuda compiler driver
Copyright (c) 2005-2017 NVIDIA Corporation
Built on Fri_Sep__1_21:08:03_CDT_2017
Cuda compilation tools, release 9.0, V9.0.176


nvidia-smi
Fri Jun  7 07:15:10 2019       
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 430.14       Driver Version: 430.14       CUDA Version: 10.2     |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  GeForce GT 720      Off  | 00000000:01:00.0 N/A |                  N/A |
| 19%   41C    P0    N/A /  N/A |      0MiB /   980MiB |     N/A      Default |
+-------------------------------+----------------------+----------------------+
|   1  GeForce GT 730      Off  | 00000000:05:00.0 N/A |                  N/A |
| 30%   41C    P0    N/A /  N/A |      0MiB /  2002MiB |     N/A      Default |
+-------------------------------+----------------------+----------------------+
                                                                               
+-----------------------------------------------------------------------------+
| Processes:                                                       GPU Memory |
|  GPU       PID   Type   Process name                             Usage      |
|=============================================================================|
|    0                    Not Supported                                       |
|    1                    Not Supported                                       |
+-----------------------------------------------------------------------------+
ID: 1997185 · Report as offensive
Loren Datlof

Send message
Joined: 24 Jan 14
Posts: 73
Credit: 19,652,385
RAC: 0
United States
Message 1997198 - Posted: 7 Jun 2019, 14:48:12 UTC - in response to Message 1997192.  
Last modified: 7 Jun 2019, 15:27:27 UTC

I got it fixed. The t1700 is crunching away on its GPUs

I changed to this special app: MBv8_8.23r3602_sse2_clNV_SoG_x86_64-pc-linux-gnu

and added this file: MultiBeam_Kernels_r3602.cl to the /var/lib/boinc-client/projects/setiathome.berkeley.edu folder

Thanks for the help
ID: 1997198 · Report as offensive
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13161
Credit: 1,160,866,277
RAC: 1,873
United States
Message 1997207 - Posted: 7 Jun 2019, 16:54:10 UTC - in response to Message 1997198.  

Didn't realize you had the CUDA toolkit installed. That was probably the problem. The toolkit installs its own files and drivers outside of the normal downloaded versions in a different location.
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 1997207 · Report as offensive
Loren Datlof

Send message
Joined: 24 Jan 14
Posts: 73
Credit: 19,652,385
RAC: 0
United States
Message 1997212 - Posted: 7 Jun 2019, 17:24:09 UTC - in response to Message 1997207.  

Shows how much I know. I thought that the CUDA toolkit was necessary to crunch.
ID: 1997212 · Report as offensive
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13161
Credit: 1,160,866,277
RAC: 1,873
United States
Message 1997225 - Posted: 7 Jun 2019, 19:05:40 UTC - in response to Message 1997212.  

Shows how much I know. I thought that the CUDA toolkit was necessary to crunch.

No the CUDA toolkit is not necessary to crunch. All that is needed is the manufacturer drivers with both the CUDA and OpenCL components.
The CUDA toolkit installs its own driver versions that is normally not the same as the current manufacturer driver version unless you specifically tell the toolkit installer NOT to install the toolkit driver and keep the manufacturer drivers. The toolkit drivers get installed into a different location from the normal manufacturer drivers. They also change the Path and LD Library paths and environment variables.
Likely the reason why even after you installed the OpenCL library separately they were not found.
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 1997225 · Report as offensive
Profile Joseph Stateson Project Donor
Volunteer tester
Avatar

Send message
Joined: 27 May 99
Posts: 309
Credit: 70,759,933
RAC: 3
United States
Message 2003298 - Posted: 19 Jul 2019, 17:56:34 UTC

I have this same problem. Just started on a new 18.04 system I put together yesterday. I googled around and found several of the "postponed for 30 seconds" problems but no solutions seems to work and I probably need to enable some log flags to get more info about that is happening.

Ati drivers were installed from amdgpu-pro-19.10-785425-ubuntu-18.04.tar
using
sudo ./amdgpu-install --OpenCL=legacy

WCG tasks run fine but gpu tasks have problems:
all milkway error out (no 30 second stuff)

all setiathome run 2 seconds and generate that 30 second error message

Going to post this over at boinc questions also. This is the first Linux system I have built that uses those S9000 "pro" AMD cards.
I noticed that "amdgpu-pro-install" is just a link to amdgpu-install so there is no longer any specific "pro" driver from AMD for Linux unlike windows..

1			7/19/2019 12:00:16 PM	Starting BOINC client version 7.14.2 for x86_64-pc-linux-gnu	
2			7/19/2019 12:00:16 PM	log flags: file_xfer, sched_ops, task	
3			7/19/2019 12:00:16 PM	Libraries: libcurl/7.58.0 OpenSSL/1.1.1 zlib/1.2.11 libidn2/2.0.4 libpsl/0.19.1 (+libidn2/2.0.4) nghttp2/1.30.0 librtmp/2.3	
4			7/19/2019 12:00:16 PM	Data directory: /var/lib/boinc-client	
5			7/19/2019 12:00:17 PM	OpenCL: AMD/ATI GPU 0: ATI FirePro V (FireGL V) Graphics Adapter (driver version 2841.4, device version OpenCL 1.2 AMD-APP (2841.4), 3072MB, 3072MB available, 1613 GFLOPS peak)	
6			7/19/2019 12:00:17 PM	OpenCL: AMD/ATI GPU 1: ATI FirePro V (FireGL V) Graphics Adapter (driver version 2841.4, device version OpenCL 1.2 AMD-APP (2841.4), 3072MB, 3072MB available, 1613 GFLOPS peak)	
7			7/19/2019 12:00:17 PM	OpenCL: AMD/ATI GPU 2: ATI FirePro V (FireGL V) Graphics Adapter (driver version 2841.4, device version OpenCL 1.2 AMD-APP (2841.4), 3072MB, 3072MB available, 1613 GFLOPS peak)	
8			7/19/2019 12:00:17 PM	[libc detection] gathered: 2.27, Ubuntu GLIBC 2.27-3ubuntu1	
9			7/19/2019 12:00:17 PM	Host name: jysdualxeon	
10			7/19/2019 12:00:17 PM	Processor: 24 GenuineIntel Intel(R) Xeon(R) CPU X5675 @ 3.07GHz [Family 6 Model 44 Stepping 2]	
11			7/19/2019 12:00:17 PM	Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmper	
12			7/19/2019 12:00:17 PM	OS: Linux Ubuntu: Ubuntu 18.04.2 LTS [4.18.0-25-generic|libc 2.27 (Ubuntu GLIBC 2.27-3ubuntu1)]	
13			7/19/2019 12:00:17 PM	Memory: 11.72 GB physical, 2.00 GB virtual	
14			7/19/2019 12:00:17 PM	Disk: 109.53 GB total, 95.54 GB free	
15			7/19/2019 12:00:17 PM	Local time is UTC -5 hours	
16			7/19/2019 12:00:17 PM	Config: GUI RPC allowed from any host	
17			7/19/2019 12:00:17 PM	Config: GUI RPCs allowed from:	
18			7/19/2019 12:00:17 PM	    jysarea51	
19			7/19/2019 12:00:17 PM	Config: use all coprocessors	
20	Milkyway@Home	7/19/2019 12:00:17 PM	URL http://milkyway.cs.rpi.edu/milkyway/; Computer ID 810090; resource share 100	
21	SETI@home	7/19/2019 12:00:17 PM	URL http://setiathome.berkeley.edu/; Computer ID 8772790; resource share 100	


and 100's of the following but no error'ed tasks

70	SETI@home	7/19/2019 12:01:51 PM	Task 17jl19ab.1022.17245.15.42.242.vlar_1 postponed for 30 seconds: 	
71	SETI@home	7/19/2019 12:01:52 PM	Task blc45_2bit_guppi_58642_03722_HIP55210_0016.25435.818.22.45.130.vlar_1 postponed for 30 seconds: 	
72	SETI@home	7/19/2019 12:01:53 PM	Task blc42_2bit_guppi_58642_03722_HIP55210_0016.26020.409.22.45.219.vlar_1 postponed for 30 seconds: 	
73	SETI@home	7/19/2019 12:01:54 PM	Task blc42_2bit_guppi_58642_03722_HIP55210_0016.26020.409.22.45.216.vlar_1 postponed for 30 seconds: 	
74	SETI@home	7/19/2019 12:01:55 PM	Task blc42_2bit_guppi_58642_04042_HIP55426_0017.26054.409.22.45.119.vlar_1 postponed for 30 seconds: 	
75	SETI@home	7/19/2019 12:01:56 PM	Task blc42_2bit_guppi_58642_04362_HIP55210_0018.26043.409.22.45.161.vlar_1 postponed for 30 seconds: 	
76	SETI@home	7/19/2019 12:01:57 PM	Task 17jl19ab.1022.17245.15.42.252.vlar_0 postponed for 30 seconds: 	
ID: 2003298 · Report as offensive
Profile Tom M
Volunteer tester

Send message
Joined: 28 Nov 02
Posts: 5124
Credit: 276,046,078
RAC: 462
Message 2003315 - Posted: 19 Jul 2019, 20:49:16 UTC

Plugged directly into the MB or on Riser cards?

When the riser card stuff is not quite right. It postpones but then the gpu tasks are "waiting". Because it starts another up. So it generates a LOT of gpu tasks waiting. This doesn't exactly sound like your symptoms though.

Tom
A proud member of the OFA (Old Farts Association).
ID: 2003315 · Report as offensive
Profile Joseph Stateson Project Donor
Volunteer tester
Avatar

Send message
Joined: 27 May 99
Posts: 309
Credit: 70,759,933
RAC: 3
United States
Message 2003317 - Posted: 19 Jul 2019, 21:21:46 UTC - in response to Message 2003315.  

Plugged directly into the MB or on Riser cards?

When the riser card stuff is not quite right. It postpones but then the gpu tasks are "waiting". Because it starts another up. So it generates a LOT of gpu tasks waiting. This doesn't exactly sound like your symptoms though.

Tom



I just checked that and the risers are locked into position correctly.

I had actually damaged an RX570 by not watching how the riser fit it in and have been careful ever since. While there are fusers for the 12v line there are none for the 3.3 and while there is no obvious damage on the PCB the lights blink and the fans spin but board never worked again.
ID: 2003317 · Report as offensive
Profile Tom M
Volunteer tester

Send message
Joined: 28 Nov 02
Posts: 5124
Credit: 276,046,078
RAC: 462
Message 2003377 - Posted: 20 Jul 2019, 2:59:50 UTC - in response to Message 2003317.  

Plugged directly into the MB or on Riser cards?

When the riser card stuff is not quite right. It postpones but then the gpu tasks are "waiting". Because it starts another up. So it generates a LOT of gpu tasks waiting. This doesn't exactly sound like your symptoms though.

Tom



I just checked that and the risers are locked into position correctly.

I had actually damaged an RX570 by not watching how the riser fit it in and have been careful ever since. While there are fusers for the 12v line there are none for the 3.3 and while there is no obvious damage on the PCB the lights blink and the fans spin but board never worked again.


Unfortunately, I have had to resort to "unplug/plugin again" as well as replacing (if that is what you are using) the USB cables with higher grade Ugreen data transfer 3.0 cables.

Tom
A proud member of the OFA (Old Farts Association).
ID: 2003377 · Report as offensive

Message boards : Number crunching : Some tasks postponing...


 
©2024 University of California
 
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.