Ryzen and Threadripper

Message boards : Number crunching : Ryzen and Threadripper
Message board moderation

To post messages, you must log in.

Previous · 1 . . . 23 · 24 · 25 · 26 · 27 · 28 · 29 . . . 69 · Next

AuthorMessage
jsm

Send message
Joined: 1 Oct 16
Posts: 124
Credit: 51,135,572
RAC: 298
Isle of Man
Message 2004606 - Posted: 28 Jul 2019, 7:00:44 UTC - in response to Message 2004326.  

If the die is bigger won't that mean the TR4 socket will be incompatible so that a claim for backwards compatibility woud not hold water?
Personally I think if a new chipset is required that a new MB is mandatory so why not have an enlarged socket?
jsm
ID: 2004606 · Report as offensive     Reply Quote
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13161
Credit: 1,160,866,277
RAC: 1,873
United States
Message 2004613 - Posted: 28 Jul 2019, 8:49:43 UTC - in response to Message 2004606.  

If the die is bigger won't that mean the TR4 socket will be incompatible so that a claim for backwards compatibility woud not hold water?
Personally I think if a new chipset is required that a new MB is mandatory so why not have an enlarged socket?
jsm

No the dies are smaller. The process node for the chiplets is 7nm versus the old process node size of 14nm. The I/O die is 14nm. So basically the new chiplet dies are 1/2 the size of the old Threadripper CCD complexes. The socket is still the same at 4094 pin count. The Threadripper socket is the same socket used for Epyc server cpus.

Who said a new chipset is mandatory? If the new X599 chipset only adds PCI Gen. 4, then you can basically skip it just like most people are skipping upgrading to the X570 chipset. Unless you have massive storage needs, the old x470 motherboards are fine for Zen 2. I expect the same case to hold true for the Threadripper 3000 cpus and the old X399 motherboards.
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 2004613 · Report as offensive     Reply Quote
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13161
Credit: 1,160,866,277
RAC: 1,873
United States
Message 2004713 - Posted: 29 Jul 2019, 5:03:44 UTC

Ponder this image to get an idea of scale. The image shows the interconnects on a Ryzen 3000 cpu substrate to connect one chiplet to its I/O die. Amazing.

Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 2004713 · Report as offensive     Reply Quote
mrchips
Avatar

Send message
Joined: 12 Dec 04
Posts: 17
Credit: 26,590,842
RAC: 8
United States
Message 2004734 - Posted: 29 Jul 2019, 11:03:20 UTC

Alien Technology at its finest.
ID: 2004734 · Report as offensive     Reply Quote
Profile Jord
Volunteer tester
Avatar

Send message
Joined: 9 Jun 99
Posts: 15184
Credit: 4,362,181
RAC: 3
Netherlands
Message 2004808 - Posted: 29 Jul 2019, 20:52:30 UTC

New CPUs coming over the horizon: https://www.tomshardware.com/news/ryzen-9-3900-ryzen-7-3700-ryzen-5-3500-amd-3000-series,40040.html

A 12 core, 24 thread 3900 with a TDP of 65W now sounds interesting enough for me to definitively wait with buying the hardware part of my new system.

The Ryzen 9 3900 features the same 12-core, 24-thread configuration as the Ryzen 3 3900X. The non-X variant has a 65W TDP (thermal design power) rating, and as a result, the chip will likely come with lower operating clocks. The same could probably be said for the Ryzen 7 3700 eight-core, 16-thread part.
ID: 2004808 · Report as offensive     Reply Quote
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13161
Credit: 1,160,866,277
RAC: 1,873
United States
Message 2004850 - Posted: 30 Jul 2019, 2:39:56 UTC

Been having a discussion over in the Threadripper threads at OCN. Lots of speculation what TR3 will bring to the table. I expect both leaks and announcements in December prior to January 2020 CES event.
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 2004850 · Report as offensive     Reply Quote
Profile Tom M
Volunteer tester

Send message
Joined: 28 Nov 02
Posts: 5124
Credit: 276,046,078
RAC: 462
Message 2004907 - Posted: 30 Jul 2019, 20:24:48 UTC

Zen2's 7nm Complications: Why not All Ryzen 3000 Cores Are Created Equal - Tom's Hardware


https://www.tomshardware.com/reviews/amd-ryzen-3000-turbo-boost-frequency-analysis,6253.html


Interesting.
A proud member of the OFA (Old Farts Association).
ID: 2004907 · Report as offensive     Reply Quote
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13161
Credit: 1,160,866,277
RAC: 1,873
United States
Message 2004913 - Posted: 30 Jul 2019, 20:58:04 UTC - in response to Message 2004907.  

Zen2's 7nm Complications: Why not All Ryzen 3000 Cores Are Created Equal - Tom's Hardware


https://www.tomshardware.com/reviews/amd-ryzen-3000-turbo-boost-frequency-analysis,6253.html


Interesting.

Nothing unexpected from what I have seen. This is a new process. As the process node improves, the binning will get better and there will be better parity among cores of each CCX. Just give TSMC and AMD a year to sort things out. Took that long to sort out Ryzen 1 too to get to Ryzen +.

One of the practical reasons to never adopt first generation or first iteration of a product. Let the pioneers be beta testers to find out the kinks and quirks and THEN buy a properly finished product.
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 2004913 · Report as offensive     Reply Quote
Profile Kissagogo27 Special Project $75 donor
Avatar

Send message
Joined: 6 Nov 99
Posts: 715
Credit: 8,032,827
RAC: 62
France
Message 2005058 - Posted: 31 Jul 2019, 20:41:34 UTC

R9 3900X + RX 5700 XT lot of GPU invalid ^^

https://setiathome.berkeley.edu/show_host_detail.php?hostid=8778660

i post it in Invalid Host Topic
ID: 2005058 · Report as offensive     Reply Quote
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13161
Credit: 1,160,866,277
RAC: 1,873
United States
Message 2005062 - Posted: 31 Jul 2019, 21:15:44 UTC - in response to Message 2005058.  

R9 3900X + RX 5700 XT lot of GPU invalid ^^

https://setiathome.berkeley.edu/show_host_detail.php?hostid=8778660

i post it in Invalid Host Topic

This is a well known problem with the current AMD drivers that are for the Navi 5700XT cards. OpenCL is totally broken. So no 5700XT cards should be run on BOINC using the AMD OpenCL drivers.
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 2005062 · Report as offensive     Reply Quote
Profile Bill Special Project $75 donor
Volunteer tester
Avatar

Send message
Joined: 30 Nov 05
Posts: 282
Credit: 6,916,194
RAC: 60
United States
Message 2005140 - Posted: 1 Aug 2019, 12:39:40 UTC - in response to Message 2003070.  

SoC voltage can have a large effect on attainable overclocks and stability. You might try around 1.13 - 1.15V on the SoC. If the mobo wasn't a APU host, I would say go the other way and drop SoC down to 0.95V. A lot of people have found that cranking ever more voltage into the SoC is counterproductive for achieving higher memory overclocks. But again, the APU is whole different animal. Tuning memory on Ryzen is much harder than on Intel since the platform doesn't have ten years of prior experience like Intel. The Calculator really helps get you to a starting point faster.

Also Samsung B-die memory likes voltage. Up to 1.5V is acceptable. You have those in your Flare-X kit. I would raise the Vdimm voltage to 1.4V right off the bat and see if you can't get 3333 or 3400 stable.
I finally got 3333 stable! I'm not sure if it is because I updated the Bios to the latest (went from 3.40 to 3.50, which uses AGESA 1.0.0.3), 1usmus' new calculator, or the fact that I didn't set the bclock. I'm guessing the latter. While trying to OC the ram, I noticed in HWinfo that my clock was at 99.9, which I know is probably close enough, but it wasn't 100. Bclock was set to auto, so I set it to a firm 100, which HWinfo read as 100.1. With the bios updated, I couldn't find a way to adjust the bclock, so I am assuming it is on auto.

I did try 1.4V earlier, when I was setting bclock, and that didn't help (I think it made it worse). I'm within the recommended range (1.375 Dram, if I recall, and 1.0875 for SOC). I'll play with it a little more tonight, but for now I'm happy with the little boost I've gotten!
Seti@home classic: 1,456 results, 1.613 years CPU time
ID: 2005140 · Report as offensive     Reply Quote
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13161
Credit: 1,160,866,277
RAC: 1,873
United States
Message 2005144 - Posted: 1 Aug 2019, 13:02:56 UTC - in response to Message 2005140.  

You shouldn't worry about the reporting of the BCLK being not exactly 100.0Mhz. Ryzen does not have any internal sensors to measure BCLK unlike Intel. So any monitoring program is only guessing. Some people are anal about that and go to changing BCLK from Auto to a manual number just to get the BCLK to read 100. But that messes with Ryzen's automatic internal adjustments.
The change in AGESA versions is likely why you can achieve 3333Mhz now. The BIOS' keep improving the memory performance.
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 2005144 · Report as offensive     Reply Quote
Profile Mr. Kevvy Crowdfunding Project Donor*Special Project $250 donor
Volunteer moderator
Volunteer tester
Avatar

Send message
Joined: 15 May 99
Posts: 3776
Credit: 1,114,826,392
RAC: 3,319
Canada
Message 2005576 - Posted: 3 Aug 2019, 22:14:55 UTC
Last modified: 3 Aug 2019, 22:15:58 UTC

The Ryzen line is doing so well that last month 79% of CPU sales were AMD and only 21% Intel.
(I'll definitely be giving one a go next time I need a new CPU/board combo.)
ID: 2005576 · Report as offensive     Reply Quote
Grant (SSSF)
Volunteer tester

Send message
Joined: 19 Aug 99
Posts: 13720
Credit: 208,696,464
RAC: 304
Australia
Message 2005583 - Posted: 3 Aug 2019, 22:50:23 UTC - in response to Message 2005576.  

The Ryzen line is doing so well that last month 79% of CPU sales were AMD and only 21% Intel.
(I'll definitely be giving one a go next time I need a new CPU/board combo.)

I was disappointed when my old systems died earlier last year within weeks of each other as I was waiting for these new Ryzen cpus to come out.
I'll just have to wait and see how things stand in another 5-8 years.
Grant
Darwin NT
ID: 2005583 · Report as offensive     Reply Quote
Profile Tom M
Volunteer tester

Send message
Joined: 28 Nov 02
Posts: 5124
Credit: 276,046,078
RAC: 462
Message 2005586 - Posted: 3 Aug 2019, 22:53:15 UTC - in response to Message 2005583.  

The Ryzen line is doing so well that last month 79% of CPU sales were AMD and only 21% Intel.
(I'll definitely be giving one a go next time I need a new CPU/board combo.)

I was disappointed when my old systems died earlier last year within weeks of each other as I was waiting for these new Ryzen cpus to come out.
I'll just have to wait and see how things stand in another 5-8 years.


Or until the 3950x both starts shipping and it stays available long enough to order one at its MSRP?

;)

Tom
A proud member of the OFA (Old Farts Association).
ID: 2005586 · Report as offensive     Reply Quote
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13161
Credit: 1,160,866,277
RAC: 1,873
United States
Message 2005589 - Posted: 3 Aug 2019, 22:59:25 UTC - in response to Message 2005586.  

I'm not sure I would recommend the 3950X right now with all my issues with my 3900X. I probably will pull the 3900X and put the 2700X back in.
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 2005589 · Report as offensive     Reply Quote
Profile Tom M
Volunteer tester

Send message
Joined: 28 Nov 02
Posts: 5124
Credit: 276,046,078
RAC: 462
Message 2005593 - Posted: 3 Aug 2019, 23:02:16 UTC - in response to Message 2005589.  

I'm not sure I would recommend the 3950X right now with all my issues with my 3900X. I probably will pull the 3900X and put the 2700X back in.


Is "bleeding edge" lovely with all it's RED overtones ;)?

Tom
A proud member of the OFA (Old Farts Association).
ID: 2005593 · Report as offensive     Reply Quote
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13161
Credit: 1,160,866,277
RAC: 1,873
United States
Message 2005620 - Posted: 4 Aug 2019, 3:30:01 UTC - in response to Message 2005593.  

I am and always have been a glutton for punishment for living on the "bleeding edge" Once again, I am trailblazing.
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 2005620 · Report as offensive     Reply Quote
Profile Tom M
Volunteer tester

Send message
Joined: 28 Nov 02
Posts: 5124
Credit: 276,046,078
RAC: 462
Message 2005689 - Posted: 4 Aug 2019, 11:51:16 UTC - in response to Message 2005620.  

I am and always have been a glutton for punishment for living on the "bleeding edge" Once again, I am trailblazing.


Or is that "tailblazing"?
A proud member of the OFA (Old Farts Association).
ID: 2005689 · Report as offensive     Reply Quote
Profile Tom M
Volunteer tester

Send message
Joined: 28 Nov 02
Posts: 5124
Credit: 276,046,078
RAC: 462
Message 2005855 - Posted: 5 Aug 2019, 12:56:49 UTC - in response to Message 2005589.  

I'm not sure I would recommend the 3950X right now with all my issues with my 3900X. I probably will pull the 3900X and put the 2700X back in.


A brief note. In another thread Keith has just reported....
The over temperature shutdown errors that Keith has been fighting turn out to be an error in the Ryzen 3000 Bios code which is shutting down all of the fans running off the motherboard. So the cpu overheats.

This is apparently specific to the ASUS mb he is using or to the specific model of ASUS that he is using.

Keith's workaround is to drive the fans directly from the PSU.
A proud member of the OFA (Old Farts Association).
ID: 2005855 · Report as offensive     Reply Quote
Previous · 1 . . . 23 · 24 · 25 · 26 · 27 · 28 · 29 . . . 69 · Next

Message boards : Number crunching : Ryzen and Threadripper


 
©2024 University of California
 
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.