like the others results, it's a noisy wu

3269886760

Thank you for that, Kissagogo27. :-) I just hope we don't get too many more of these.

In other news, I'm getting closer to having all the parts necessary to build a new Hackintosh!!! :-) Just picked up a Fenvi FV-T919 WiFi AC & Bluetooth 4 PCI-e x1 Card! All I need now is RAM, PSU, and, (maybe), a Win 10 Pro Install CD for Dual Boot.

Parts on Hand:

One ATAPI DVD-RW SATA Drive
Intel i7 7700K
CoolerMaster Hyper212 EVO
Fenvi FV-T919 WiFi AC & Bluetooth 4 Card
SilverStone FS303B 2-Full Size Bay Slot Take-up - 3 Hot Swap Drive Bay
Gigabyte GA-H270-HD3 MOBO
One EVGA GTX-760 Card
Two EVGA GTX-750TI SC Cards
E-ATX Full Tower Case - (Gaming Type with Blue LEDs on the Front Fans) - 5 140mm Fans

Parts on Order:

Two Samsung 860 Pro SATA III 1TB SSD Drives

Parts Needed in Next 6 Mos:

32GB Corsair Vengeance DDR4-CL14 Dual Channel RAM
Corsair HX750i 750 Watt PSU
Windows 10 Pro x64 DVD

Parts Wanted over the Next Year to Year and a Half:

One MacVidCards "Low Power" NVIDIA GTX-1070 GPU
(May move two EVGA GTX-1050s from Prometheus into Hackintosh IF I can get the MacVidCards GPU)


TL

---

TimeLord04
Have TARDIS, will travel...
Come along K-9!
Join Calm Chaos

I broke down and made a post at nVidia just to see what they would say. So far, after 4 days, they haven't said a thing. I placed the post right next to the Mojave Driver post for added effect, Conflict with macOS 10.12 & 10.13 Web Drivers and SETI@Home CUDA App? I suppose they are still pondering a response. I have found that for Me the problem is easier to solve in Sierra, so, I've gone back to Sierra for now.

The Instant overflow with all triplets happens with ALL versions of the Special App and there isn't a Fix. Fortunately they are all at Chirp Zero and will be discarded as RFI, i.e. the Noise Bomb will Never be used. There is a thread about Overflows with All Triplets if you search for it.

I have found that Non-Flashed GPUs in macOS will Always use PCIe Generation One no matter what the PCIe generation. So, unless you want to buy the much more expensive Flashed GPUs, you should try a motherboard with at least x8 slots. I have found a used ASUS board with Four x8 slots, so I'll be trying that soon. Hopefully it will work as a Hackintosh and give Full SETI speed to the four 1070s. We will see...

I broke down and made a post at nVidia just to see what they would say. So far, after 4 days, they haven't said a thing. I placed the post right next to the Mojave Driver post for added effect, Conflict with macOS 10.12 & 10.13 Web Drivers and SETI@Home CUDA App? I suppose they are still pondering a response. I have found that for Me the problem is easier to solve in Sierra, so, I've gone back to Sierra for now.

The Instant overflow with all triplets happens with ALL versions of the Special App and there isn't a Fix. Fortunately they are all at Chirp Zero and will be discarded as RFI, i.e. the Noise Bomb will Never be used. There is a thread about Overflows with All Triplets if you search for it.

I have found that Non-Flashed GPUs in macOS will Always use PCIe Generation One no matter what the PCIe generation. So, unless you want to buy the much more expensive Flashed GPUs, you should try a motherboard with at least x8 slots. I have found a used ASUS board with Four x8 slots, so I'll be trying that soon. Hopefully it will work as a Hackintosh and give Full SETI speed to the four 1070s. We will see...

Thank you, TBar, for the effort. 😀


TL

---

TimeLord04
Have TARDIS, will travel...
Come along K-9!
Join Calm Chaos

[Update:]

[Hackintosh - Andromeda:]

Task 7301005776

Name 02ja19aa.13906.48754.11.38.35_1

Workunit 3293088621

Created 3 Jan 2019, 17:38:59 UTC
Sent 3 Jan 2019, 22:35:13 UTC
Report deadline 25 Feb 2019, 16:05:58 UTC
Received 3 Jan 2019, 22:54:08 UTC
Server state Over
Outcome Success
Client state Done
Exit status 0 (0x00000000)
Computer ID 7952666
Run time 1 min 8 sec
CPU time 22 sec
Validate state Invalid
Credit 0.00
Device peak FLOPS 6,462.72 GFLOPS
Application version SETI@home v8
Anonymous platform (NVIDIA GPU)
Peak working set size 503.79 MB
Peak swap size 58,229.98 MB
Peak disk usage 0.20 MB


Stderr output

<core_client_version>7.8.6</core_client_version>
<![CDATA[
<stderr_txt>
unroll limits: min = 1, max = 256. Using unroll autotune.
setiathome_CUDA: Found 2 CUDA device(s):
Device 1: GeForce GTX 1070, 8191 MiB, regsPerBlock 65536
computeCap 6.1, multiProcs 15
pciBusID = 1, pciSlotID = 0
Device 2: GeForce GTX 1050, 2047 MiB, regsPerBlock 65536
computeCap 6.1, multiProcs 5
pciBusID = 7, pciSlotID = 0
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 1070 is okay
SETI@home using CUDA accelerated device GeForce GTX 1070
Unroll autotune 15. Overriding Pulse find periods per launch. Parameter -pfp set to 15

setiathome v8 enhanced x41p_V0.97, Cuda 9.00 special
Modifications done by petri33, compiled by TBar

Detected setiathome_enhanced_v8 task. Autocorrelations enabled, size 128k elements.
Work Unit Info:
...............
WU true angle range is : 0.439113
Sigma 3
Thread call stack limit is: 1k
Triplet: peak=10.2153, time=104.8, period=1.599, d_freq=1420340070.26, chirp=-27.02, fft_len=256
setiathome_CUDA: Found 2 CUDA device(s):
Device 1: GeForce GTX 1070, 8191 MiB, regsPerBlock 65536
computeCap 6.1, multiProcs 15
pciBusID = 1, pciSlotID = 0
Device 2: GeForce GTX 1050, 2047 MiB, regsPerBlock 65536
computeCap 6.1, multiProcs 5
pciBusID = 7, pciSlotID = 0
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 1070 is okay
SETI@home using CUDA accelerated device GeForce GTX 1070
Unroll autotune 15. Overriding Pulse find periods per launch. Parameter -pfp set to 15
Restarted at 48.05 percent, with setiathome enhanced x41p_V0.97, Cuda 9.00 special
Detected setiathome_enhanced_v8 task. Autocorrelations enabled, size 128k elements.
Sigma 3
Thread call stack limit is: 1k
Spike: peak=256, time=94.2, d_freq=1420339314.81, chirp=-30.398, fft_len=256
Spike: peak=inf, time=94.46, d_freq=1420339688.31, chirp=-30.398, fft_len=256
Spike: peak=256, time=94.52, d_freq=1420344188.06, chirp=-30.398, fft_len=256
Spike: peak=256, time=94.94, d_freq=1420339292.5, chirp=-30.398, fft_len=256
Spike: peak=inf, time=95.2, d_freq=1420339437.12, chirp=-30.398, fft_len=256
Spike: peak=256, time=95.67, d_freq=1420339270.18, chirp=-30.398, fft_len=256
Spike: peak=inf, time=95.93, d_freq=1420339452.95, chirp=-30.398, fft_len=256
Spike: peak=256, time=96.4, d_freq=1420339247.87, chirp=-30.398, fft_len=256
Spike: peak=inf, time=96.67, d_freq=1420339621.37, chirp=-30.398, fft_len=256
Spike: peak=128, time=96.77, d_freq=1420339427.45, chirp=-30.398, fft_len=256
Spike: peak=256, time=97.09, d_freq=1420339417.89, chirp=-30.398, fft_len=256
Spike: peak=256, time=97.14, d_freq=1420339225.56, chirp=-30.398, fft_len=256
Spike: peak=256, time=97.69, d_freq=1420339246.97, chirp=-30.398, fft_len=256
Spike: peak=128, time=97.71, d_freq=1420339398.76, chirp=-30.398, fft_len=256
Spike: peak=128, time=97.82, d_freq=1420341836.98, chirp=-30.398, fft_len=256
Spike: peak=256, time=97.87, d_freq=1420339203.25, chirp=-30.398, fft_len=256
Spike: peak=256, time=97.92, d_freq=1420344580.38, chirp=-30.398, fft_len=256
Spike: peak=inf, time=98.08, d_freq=1420339578.34, chirp=-30.398, fft_len=256
Spike: peak=89.07008, time=98.87, d_freq=1420344322.81, chirp=-30.398, fft_len=256
Spike: peak=128, time=98.92, d_freq=1420341727.22, chirp=-30.398, fft_len=256
Spike: peak=128.0046, time=98.97, d_freq=1420339513.1, chirp=-30.398, fft_len=256
Spike: peak=128, time=99.13, d_freq=1420341720.84, chirp=-30.398, fft_len=256
Spike: peak=128, time=99.23, d_freq=1420341717.66, chirp=-30.398, fft_len=256
Spike: peak=inf, time=99.26, d_freq=1420345302.68, chirp=-30.398, fft_len=256
Spike: peak=256, time=99.39, d_freq=1420339080.73, chirp=-30.398, fft_len=256
Spike: peak=255.969, time=99.81, d_freq=1420339182.43, chirp=-30.398, fft_len=256
Spike: peak=129.3661, time=100, d_freq=1420339481.23, chirp=-30.398, fft_len=256
Spike: peak=64.00001, time=106.4, d_freq=1420339134.2, chirp=-30.398, fft_len=256
Spike: peak=64.00001, time=106.5, d_freq=1420339131.02, chirp=-30.398, fft_len=256
SETI@Home Informational message -9 result_overflow
NOTE: The number of results detected equals the storage space allocated. <<----- This is the second time I've seen this, it's the first time, though, on the new MacVidCards' GTX-1070 8GB Card.

Best spike: peak=inf, time=94.46, d_freq=1420339688.31, chirp=-30.398, fft_len=256
Best autocorr: peak=17.6143, time=100.7, delay=2.9182, d_freq=1420339755.5, chirp=-20.279, fft_len=128k
Best gaussian: peak=3.362674, mean=0.5806121, ChiSq=1.377328, time=39.42, d_freq=1420342623.31,
score=-3.390147, null_hyp=2.041341, chirp=16.713, fft_len=16k
Best pulse: peak=1.954573, time=54.98, period=0.4399, d_freq=1420337869.34, score=0.9953, chirp=-18.706, fft_len=64
Best triplet: peak=10.2153, time=104.8, period=1.599, d_freq=1420340070.26, chirp=-27.02, fft_len=256

Spike count: 29
Autocorr count: 0
Pulse count: 0
Triplet count: 1
Gaussian count: 0

14:45:52 (17927): called boinc_finish(0)

</stderr_txt>
]]>


---------------------------- End Std_Err Report. ------------------------

What the heck is causing the failure(s)???? Is this still the Web Driver?????


TL

---

TimeLord04
Have TARDIS, will travel...
Come along K-9!
Join Calm Chaos

Just read what you posted;

SETI@home using CUDA accelerated device GeForce GTX 1070
Unroll autotune 15. Overriding Pulse find periods per launch. Parameter -pfp set to 15
Restarted at 48.05 percent, with setiathome enhanced x41p_V0.97, Cuda 9.00 special

I believe you've been warned about restarting tasks, and told how to fix it. The checkpoint settings is in different places depending on your version of BOINC. Some have it in Disk & Memory, some have it at the bottom of the Computing tab. It is the Only setting in Computing preferences that mentions setting a checkpoint, you should set it higher than the longest running CUDA task.

SETI@Home Informational message -9 result_overflow
NOTE: The number of results detected equals the storage space allocated. <<----- What's THIS???!!!???

RFI? Maximum allowed number of spikes is 30 IIRC. If it isn't some sort of computational error. See what your wing mates return when they return it. If they are not heavy in spikes, look at driver issues.

OK - I've set Checkpoint to 4 Min! (For all the good it will do...) I still use a "Daily Schedule" - Window from 18:00 to 09:00, daily. This means that Units WILL STILL get Suspended and Resumed...

We'll see....


TL

---

TimeLord04
Have TARDIS, will travel...
Come along K-9!
Join Calm Chaos

This means that Units WILL STILL get Suspended and Resumed...

With the longer than runtime setting, all that should result is the loss of that processing time, and it should stop the bad results from occurring.

---

Grant
Darwin NT

[1070 Update:]

Task 7301301630

Name blc16_2bit_guppi_58406_26617_HIP20917_0102.17470.818.21.44.246.vlar_1
Workunit 3293231606
Created 3 Jan 2019, 20:34:22 UTC
Sent 4 Jan 2019, 0:54:42 UTC
Report deadline 26 Feb 2019, 5:54:24 UTC
Received 4 Jan 2019, 2:38:07 UTC
Server state Over
Outcome Success
Client state Done
Exit status 0 (0x00000000)
Computer ID 7952666
Run time 1 min 35 sec
CPU time 24 sec
Validate state Invalid
Credit 0.00
Device peak FLOPS 6,462.72 GFLOPS
Application version SETI@home v8
Anonymous platform (NVIDIA GPU)
Peak working set size 472.44 MB
Peak swap size 58,202.79 MB
Peak disk usage 0.20 MB

Stderr output

<core_client_version>7.8.6</core_client_version>
<![CDATA[
<stderr_txt>
setiathome_CUDA: Found 2 CUDA device(s):
Device 1: GeForce GTX 1070, 8191 MiB, regsPerBlock 65536
computeCap 6.1, multiProcs 15
pciBusID = 7, pciSlotID = 0
Device 2: GeForce GTX 1050, 2047 MiB, regsPerBlock 65536
computeCap 6.1, multiProcs 5
pciBusID = 1, pciSlotID = 0
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 1070 is okay
SETI@home using CUDA accelerated device GeForce GTX 1070
Unroll autotune 15. Overriding Pulse find periods per launch. Parameter -pfp set to 15

setiathome v8 enhanced x41p_V0.97, Cuda 9.00 special
Modifications done by petri33, compiled by TBar

Detected setiathome_enhanced_v8 task. Autocorrelations enabled, size 128k elements.
Work Unit Info:
...............
WU true angle range is : 0.013487
Sigma 54
Sigma > GaussTOffsetStop: 54 > 10
Thread call stack limit is: 1k
Autocorr: peak=18.97425, time=28.63, delay=0.9972, d_freq=6175666128.66, chirp=-23.763, fft_len=128k
Triplet: peak=12.37806, time=31.26, period=26.97, d_freq=6175671017.99, chirp=-59.848, fft_len=32

Best spike: peak=23.19383, time=8.321, d_freq=6175664683.21, chirp=85.657, fft_len=2k
Best autocorr: peak=18.97425, time=28.63, delay=0.9972, d_freq=6175666128.66, chirp=-23.763, fft_len=128k
Best gaussian: peak=0, mean=0, ChiSq=0, time=-2.124e+11, d_freq=0,
score=-12, null_hyp=0, chirp=0, fft_len=0
Best pulse: peak=0, time=-2.124e+11, period=0, d_freq=0, score=0, chirp=0, fft_len=0
Best triplet: peak=12.37806, time=31.26, period=26.97, d_freq=6175671017.99, chirp=-59.848, fft_len=32

Spike count: 0
Autocorr count: 1
Pulse count: 0
Triplet count: 1
Gaussian count: 0

17:39:16 (837): called boinc_finish(0)

</stderr_txt>
]]>

------------------------ End Std_Err Report. ------------------------

I'm still getting these "Best Pulse=0" Results! Monitor is plugged into the 1070 and IS ON! WHY is this still happening??? I have several of these, now... 🙁

Are these just "Noisy" Units???


TL

---

TimeLord04
Have TARDIS, will travel...
Come along K-9!
Join Calm Chaos

this is the other problem, the "no pulses bug" if i have a good memory ...

---

Read this again Very carefully, https://setiathome.berkeley.edu/forum_thread.php?id=83646&postid=1969357#1969357

...on two of them making sure the App is not missing pulses and then turning off the monitor works...
...it works fine as long as the monitor connected to the ATI card is running...
...connected to a TV that stays on all the time and is connected by another ATI card....

Read this also, https://devtalk.nvidia.com/default/topic/1045736/driver/conflict-with-macos-10-12-amp-10-13-web-drivers-and-seti-home-cuda-app-/

No Where does it say you can run monitors connected to NV cards and leave the monitor On. In Fact, that is the Whole problem. If the monitor is connected to a NV card it must be Off.
The only way to avoid the problem is to run Sierra and the older zi3v App, that has been stated before too.

Read this again Very carefully, https://setiathome.berkeley.edu/forum_thread.php?id=83646&postid=1969357#1969357

...on two of them making sure the App is not missing pulses and then turning off the monitor works...
...it works fine as long as the monitor connected to the ATI card is running...
...connected to a TV that stays on all the time and is connected by another ATI card....

Read this also, https://devtalk.nvidia.com/default/topic/1045736/driver/conflict-with-macos-10-12-amp-10-13-web-drivers-and-seti-home-cuda-app-/

No Where does it say you can run monitors connected to NV cards and leave the monitor On. In Fact, that is the Whole problem. If the monitor is connected to a NV card it must be Off.
The only way to avoid the problem is to run Sierra and the older zi3v App, that has been stated before too.

Thank you, again, TBar. I got confused... I thought, based on the fact that the real Mac is Crunching on ONLY a 2GB Card that NO monitor could be attached to the NVIDIA Card... I thought, incorrectly, that the new 1070 8GB Card 'could' Crunch with a monitor on...

OK - Now it's clear. I will have the monitor on the Hackintosh OFF from now on just before 18:00 Local Time and NOT turn the monitor back on until after 09:00 the next day.

I wish NVIDIA would fix the DAMNED Web Driver! This is getting RIDICULOUS, the number of steps I have to take on EACH Computer to keep Crunching without Errors!!! 😞😖😡


TL

---

TimeLord04
Have TARDIS, will travel...
Come along K-9!
Join Calm Chaos

I wish NVIDIA would fix the DAMNED Web Driver! This is getting RIDICULOUS, the number of steps I have to take on EACH Computer to keep Crunching without Errors!!! 😞😖😡

Why is it their fault that your system is having issues because you're trying to make it do things is was never meant to do?

---

Grant
Darwin NT

I wish NVIDIA would fix the DAMNED Web Driver! This is getting RIDICULOUS, the number of steps I have to take on EACH Computer to keep Crunching without Errors!!! 😞😖😡

Why is it their fault that your system is having issues because you're trying to make it do things is was never meant to do?

TBar says, (along with Petri33), that this IS the fault of the NVIDIA Web Driver.


TL

---

TimeLord04
Have TARDIS, will travel...
Come along K-9!
Join Calm Chaos

Why is it their fault that your system is having issues because you're trying to make it do things is was never meant to do?

TBar says, (along with Petri33), that this IS the fault of the NVIDIA Web Driver.

I will have the monitor on the Hackintosh OFF from now on just before 18:00 Local Time and NOT turn the monitor back on until after 09:00 the next day.

If you were to run Linux or Windows on the system with the relevant drivers you wouldn't be having these issues. If you were to run Apple hardware with their OS & the relevant drivers, you wouldn't be having these issues.
*shrug*

---

Grant
Darwin NT

Why is it their fault that your system is having issues because you're trying to make it do things is was never meant to do?

TBar says, (along with Petri33), that this IS the fault of the NVIDIA Web Driver.

I will have the monitor on the Hackintosh OFF from now on just before 18:00 Local Time and NOT turn the monitor back on until after 09:00 the next day.

If you were to run Linux or Windows on the system with the relevant drivers you wouldn't be having these issues. If you were to run Apple hardware with their OS & the relevant drivers, you wouldn't be having these issues.
*shrug*

WRONG!!! My Mid-2010 REAL Mac Pro 5,1 WITH the same NVIDIA Web Drivers HAS THE SAME ISSUE!!! THE FAULT is the NVIDIA Drivers, ASK TBar!


TL

---

TimeLord04
Have TARDIS, will travel...
Come along K-9!
Join Calm Chaos

[Update:]


[Hackintosh - Andromeda:]

Task 7309831792

Name 04ja19aa.14388.40535.9.36.0_0
Workunit 3297356107
Created 6 Jan 2019, 11:06:04 UTC
Sent 6 Jan 2019, 16:09:28 UTC
Report deadline 28 Feb 2019, 15:07:30 UTC
Received 7 Jan 2019, 5:05:04 UTC
Server state Over
Outcome Success
Client state Done
Exit status 0 (0x00000000)
Computer ID 7952666
Run time 3 sec
CPU time
Validate state Invalid
Credit 0.00
Device peak FLOPS 6,462.72 GFLOPS
Application version SETI@home v8
Anonymous platform (NVIDIA GPU)
Peak disk usage 0.20 MB

Stderr output

<core_client_version>7.8.6</core_client_version>
<![CDATA[
<stderr_txt>
setiathome_CUDA: Found 2 CUDA device(s):
Device 1: GeForce GTX 1070, 8191 MiB, regsPerBlock 65536
computeCap 6.1, multiProcs 15
pciBusID = 7, pciSlotID = 0
Device 2: GeForce GTX 1050, 2047 MiB, regsPerBlock 65536
computeCap 6.1, multiProcs 5
pciBusID = 1, pciSlotID = 0
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 1070 is okay
SETI@home using CUDA accelerated device GeForce GTX 1070
Unroll autotune 15. Overriding Pulse find periods per launch. Parameter -pfp set to 15

setiathome v8 enhanced x41p_V0.97, Cuda 9.00 special
Modifications done by petri33, compiled by TBar

Detected setiathome_enhanced_v8 task. Autocorrelations enabled, size 128k elements.
Work Unit Info:
...............
WU true angle range is : 0.434041
Sigma 3
Thread call stack limit is: 1k
Find triplets Cuda kernel encountered too many triplets, or bins above threshold, reprocessing this PoT on CPU... err = 1
Triplet: peak=9.589413, time=87.87, period=4.142, d_freq=1420003662.11, chirp=0, fft_len=8
Triplet: peak=13.53242, time=1.11, period=0.4145, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=10.18305, time=1.232, period=0.5358, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=9.858602, time=1.12, period=0.3977, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=9.956949, time=1.232, period=0.5095, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=16.19476, time=1.08, period=0.2073, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=12.38165, time=1.097, period=0.2241, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=16.19476, time=1.097, period=0.1905, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=12.45925, time=1.123, period=0.2073, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=11.1704, time=1.12, period=0.03973, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=16.19476, time=1.287, period=0.2073, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=11.032, time=1.103, period=0.006963, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=13.53242, time=1.311, period=0.2142, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=9.928197, time=1.31, period=0.2073, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=13.53242, time=1.318, period=0.2073, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=14.75525, time=1.321, period=0.2011, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=11.68301, time=1.33, period=0.2073, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=16.19476, time=1.521, period=0.2339, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=12.1343, time=1.518, period=0.2073, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=14.75525, time=1.521, period=0.2109, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=11.19625, time=1.537, period=0.2269, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=14.75525, time=1.521, period=0.2036, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=13.53242, time=1.525, period=0.2073, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=14.75525, time=1.521, period=0.003686, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=14.39517, time=4.475, period=2.711, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=12.0443, time=10.52, period=3.392, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=15.92645, time=10.74, period=2.957, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=16.23914, time=10.74, period=2.75, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=10.90718, time=13.13, period=0.2073, d_freq=1419995117.19, chirp=0, fft_len=8
Triplet: peak=14.56242, time=13.32, period=0.2073, d_freq=1419995117.19, chirp=0, fft_len=8

SETI@Home Informational message -9 result_overflow
NOTE: The number of results detected equals the storage space allocated.

Best spike: peak=7.999342, time=68.82, d_freq=1419995117.19, chirp=0, fft_len=8
Best autocorr: peak=0, time=-2.124e+11, delay=0, d_freq=0, chirp=0, fft_len=0
Best gaussian: peak=0, mean=0, ChiSq=0, time=-2.124e+11, d_freq=0,
score=-12, null_hyp=0, chirp=0, fft_len=0
Best pulse: peak=0, time=-2.124e+11, period=0, d_freq=0, score=0, chirp=0, fft_len=0
Best triplet: peak=16.23914, time=10.74, period=2.75, d_freq=1419995117.19, chirp=0, fft_len=8

Spike count: 0
Autocorr count: 0
Pulse count: 0
Triplet count: 30
Gaussian count: 0

20:50:31 (68417): called boinc_finish(0)

</stderr_txt>
]]>

------------------------ End Std_Err Report. ------------------------


Monitor was OFF at 5:00 PM Local Time. Still getting Best Pulse = 0... 🙁


TL

---

TimeLord04
Have TARDIS, will travel...
Come along K-9!
Join Calm Chaos

ANOTHER "Best Pulse = 0" with Monitor OFF on Hackintosh - Andromeda, iMac 18,3.

Task 7353627023

Name 18ja19ab.7702.12337.10.37.1_0
Workunit 3318403398
Created 21 Jan 2019, 3:53:27 UTC
Sent 21 Jan 2019, 9:05:42 UTC
Report deadline 10 Feb 2019, 20:15:24 UTC
Received 21 Jan 2019, 12:10:15 UTC
Server state Over
Outcome Success
Client state Done
Exit status 0 (0x00000000)
Computer ID 7952666
Run time 3 sec
CPU time
Validate state Invalid
Credit 0.00
Device peak FLOPS 6,462.72 GFLOPS
Application version SETI@home v8
Anonymous platform (NVIDIA GPU)
Peak disk usage 0.20 MB

Stderr output

<core_client_version>7.8.6</core_client_version>
<![CDATA[
<stderr_txt>
setiathome_CUDA: Found 2 CUDA device(s):
Device 1: GeForce GTX 1070, 8191 MiB, regsPerBlock 65536
computeCap 6.1, multiProcs 15
pciBusID = 7, pciSlotID = 0
Device 2: GeForce GTX 1050, 2047 MiB, regsPerBlock 65536
computeCap 6.1, multiProcs 5
pciBusID = 1, pciSlotID = 0
In cudaAcc_initializeDevice(): Boinc passed DevPref 1
setiathome_CUDA: CUDA Device 1 specified, checking...
Device 1: GeForce GTX 1070 is okay
SETI@home using CUDA accelerated device GeForce GTX 1070
Unroll autotune 15. Overriding Pulse find periods per launch. Parameter -pfp set to 15

setiathome v8 enhanced x41p_V0.97, Cuda 9.00 special
Modifications done by petri33, compiled by TBar

Detected setiathome_enhanced_v8 task. Autocorrelations enabled, size 128k elements.
Work Unit Info:
...............
WU true angle range is : 6.249130
Sigma 0
Thread call stack limit is: 1k
Find triplets Cuda kernel encountered too many triplets, or bins above threshold, reprocessing this PoT on CPU... err = 2
Triplet: peak=8.336842, time=50.97, period=0.003277, d_freq=1420010986.33, chirp=0, fft_len=8
Triplet: peak=8.336842, time=50.97, period=0.006144, d_freq=1420010986.33, chirp=0, fft_len=8
Triplet: peak=7.660039, time=50.97, period=0.003277, d_freq=1420010986.33, chirp=0, fft_len=8
Triplet: peak=8.137941, time=36.93, period=0.002867, d_freq=1420012207.03, chirp=0, fft_len=8
Triplet: peak=8.329524, time=36.93, period=0.002867, d_freq=1420012207.03, chirp=0, fft_len=8
Triplet: peak=7.587486, time=48.04, period=0.05612, d_freq=1420013427.73, chirp=0, fft_len=8
Triplet: peak=7.884716, time=48.04, period=0.05612, d_freq=1420013427.73, chirp=0, fft_len=8
Triplet: peak=7.90739, time=58.46, period=0.3641, d_freq=1420013427.73, chirp=0, fft_len=8
Triplet: peak=7.166087, time=93.95, period=0.02621, d_freq=1420013427.73, chirp=0, fft_len=8
Triplet: peak=7.025592, time=93.97, period=0.01679, d_freq=1420013427.73, chirp=0, fft_len=8
Triplet: peak=7.041549, time=93.95, period=0.02621, d_freq=1420013427.73, chirp=0, fft_len=8
Triplet: peak=6.903496, time=93.97, period=0.01679, d_freq=1420013427.73, chirp=0, fft_len=8
Triplet: peak=10.05479, time=0.485, period=0.01925, d_freq=1420004882.81, chirp=0, fft_len=8
Triplet: peak=7.116388, time=10.6, period=0.02294, d_freq=1420004882.81, chirp=0, fft_len=8
Triplet: peak=7.896367, time=10.6, period=0.02662, d_freq=1420004882.81, chirp=0, fft_len=8
Triplet: peak=7.789343, time=10.6, period=0.02294, d_freq=1420004882.81, chirp=0, fft_len=8
Triplet: peak=7.789343, time=10.6, period=0.003277, d_freq=1420004882.81, chirp=0, fft_len=8
Triplet: peak=9.721764, time=12.99, period=0.01024, d_freq=1420004882.81, chirp=0, fft_len=8
Triplet: peak=9.611044, time=12.95, period=0.02621, d_freq=1420004882.81, chirp=0, fft_len=8
Triplet: peak=9.611044, time=12.97, period=0.01311, d_freq=1420004882.81, chirp=0, fft_len=8
Triplet: peak=11.45159, time=12.99, period=0.01024, d_freq=1420004882.81, chirp=0, fft_len=8
Triplet: peak=13.4303, time=14.48, period=0.02294, d_freq=1420004882.81, chirp=0, fft_len=8
Triplet: peak=8.973988, time=16, period=0.0258, d_freq=1420004882.81, chirp=0, fft_len=8
Triplet: peak=8.973988, time=16.02, period=0.02621, d_freq=1420004882.81, chirp=0, fft_len=8
Triplet: peak=8.045744, time=16, period=0.0258, d_freq=1420004882.81, chirp=0, fft_len=8
Triplet: peak=7.475334, time=22.83, period=0.006144, d_freq=1420004882.81, chirp=0, fft_len=8
Triplet: peak=8.06433, time=22.83, period=0.006144, d_freq=1420004882.81, chirp=0, fft_len=8
Triplet: peak=10.06901, time=23.5, period=0.01966, d_freq=1420004882.81, chirp=0, fft_len=8
Triplet: peak=9.15403, time=24.78, period=0.05898, d_freq=1420004882.81, chirp=0, fft_len=8
Triplet: peak=8.616583, time=24.78, period=0.05898, d_freq=1420004882.81, chirp=0, fft_len=8
SETI@Home Informational message -9 result_overflow
NOTE: The number of results detected equals the storage space allocated.

Best spike: peak=7.999269, time=39.72, d_freq=1420012207.03, chirp=0, fft_len=8
Best autocorr: peak=0, time=-2.124e+11, delay=0, d_freq=0, chirp=0, fft_len=0
Best gaussian: peak=0, mean=0, ChiSq=0, time=-2.124e+11, d_freq=0,
score=-12, null_hyp=0, chirp=0, fft_len=0
Best pulse: peak=0, time=-2.124e+11, period=0, d_freq=0, score=0, chirp=0, fft_len=0
Best triplet: peak=13.4303, time=14.48, period=0.02294, d_freq=1420004882.81, chirp=0, fft_len=8

Spike count: 0
Autocorr count: 0
Pulse count: 0
Triplet count: 30
Gaussian count: 0

04:00:14 (1590): called boinc_finish(0)

</stderr_txt>
]]>

---

TimeLord04
Have TARDIS, will travel...
Come along K-9!
Join Calm Chaos