Panic Mode On (107) Server Problems?

Message boards : Number crunching : Panic Mode On (107) Server Problems?
Message board moderation

To post messages, you must log in.

Previous · 1 . . . 18 · 19 · 20 · 21 · 22 · 23 · 24 . . . 29 · Next

AuthorMessage
Grant (SSSF)
Volunteer tester

Send message
Joined: 19 Aug 99
Posts: 13855
Credit: 208,696,464
RAC: 304
Australia
Message 1890504 - Posted: 18 Sep 2017, 4:53:29 UTC - in response to Message 1890492.  

Still way down on the Linux machine. I got all of 3 task after the kick routine. Down about 200 now.

Just checked my i7 and it's cache was running down. Did Tbar's Update, update, update, and cache re-filled.
Grant
Darwin NT
ID: 1890504 · Report as offensive
Profile Zalster Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 27 May 99
Posts: 5517
Credit: 528,817,460
RAC: 242
United States
Message 1890506 - Posted: 18 Sep 2017, 5:21:09 UTC - in response to Message 1890504.  

I've been noticing slowing of the webpages and sometimes I'm getting

"unable to reach website" and blank pages...

Hope this isn't leading up to something...
ID: 1890506 · Report as offensive
Grant (SSSF)
Volunteer tester

Send message
Joined: 19 Aug 99
Posts: 13855
Credit: 208,696,464
RAC: 304
Australia
Message 1890510 - Posted: 18 Sep 2017, 6:00:46 UTC - in response to Message 1890506.  

I've been noticing slowing of the webpages and sometimes I'm getting

"unable to reach website" and blank pages...

Hope this isn't leading up to something...

Web site/forums have been MIA for about 5min or so a few times over the last week or two.
Grant
Darwin NT
ID: 1890510 · Report as offensive
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 1890535 - Posted: 18 Sep 2017, 11:22:01 UTC - in response to Message 1890492.  

Still way down on the Linux machine. I got all of 3 task after the kick routine. Down about 200 now.


. . Ouch!

Stephen

. ..
ID: 1890535 · Report as offensive
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13164
Credit: 1,160,866,277
RAC: 1,873
United States
Message 1890597 - Posted: 18 Sep 2017, 16:18:16 UTC - in response to Message 1890535.  

Still down 150 overnight. Going to have to kick the linux machine again.
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 1890597 · Report as offensive
Grant (SSSF)
Volunteer tester

Send message
Joined: 19 Aug 99
Posts: 13855
Credit: 208,696,464
RAC: 304
Australia
Message 1890740 - Posted: 19 Sep 2017, 5:23:02 UTC

Forums are randomly taking forever, Scheduler requests are timing out.
Grant
Darwin NT
ID: 1890740 · Report as offensive
Iona
Avatar

Send message
Joined: 12 Jul 07
Posts: 790
Credit: 22,438,118
RAC: 0
United Kingdom
Message 1890743 - Posted: 19 Sep 2017, 5:37:02 UTC - in response to Message 1890740.  

I've been getting the same, too. I'll keep my fingers crossed for a smooth 'outrage'.
Don't take life too seriously, as you'll never come out of it alive!
ID: 1890743 · Report as offensive
Grant (SSSF)
Volunteer tester

Send message
Joined: 19 Aug 99
Posts: 13855
Credit: 208,696,464
RAC: 304
Australia
Message 1890745 - Posted: 19 Sep 2017, 5:57:00 UTC - in response to Message 1890743.  

I've been getting the same, too. I'll keep my fingers crossed for a smooth 'outrage'.

Cancel the panic.
Forums seem to be working again (for now), and the Scheduler is responding again.
Grant
Darwin NT
ID: 1890745 · Report as offensive
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 1890753 - Posted: 19 Sep 2017, 6:23:11 UTC - in response to Message 1890745.  

I've been getting the same, too. I'll keep my fingers crossed for a smooth 'outrage'.

Cancel the panic.
Forums seem to be working again (for now), and the Scheduler is responding again.


. . Getting plenty of work here, mostly GBT stuff.

Stephen

??
ID: 1890753 · Report as offensive
Profile Zalster Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 27 May 99
Posts: 5517
Credit: 528,817,460
RAC: 242
United States
Message 1890758 - Posted: 19 Sep 2017, 6:43:29 UTC - in response to Message 1890753.  

Crunch ahoy!!!
ID: 1890758 · Report as offensive
Speedy
Volunteer tester
Avatar

Send message
Joined: 26 Jun 04
Posts: 1643
Credit: 12,921,799
RAC: 89
New Zealand
Message 1890771 - Posted: 19 Sep 2017, 9:09:26 UTC - in response to Message 1890753.  

I've been getting the same, too. I'll keep my fingers crossed for a smooth 'outrage'.

Cancel the panic.
Forums seem to be working again (for now), and the Scheduler is responding again.


. . Getting plenty of work here, mostly GBT stuff.

Stephen

??

Has anybody else noticed that the size of all work units are same roughly 705 kilobytes since they increased the the size of work units? I thought they were only increasing the size of the GBT tasks
ID: 1890771 · Report as offensive
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 1890772 - Posted: 19 Sep 2017, 9:16:24 UTC - in response to Message 1890771.  


Has anybody else noticed that the size of all work units are same roughly 705 kilobytes since they increased the the size of work units? I thought they were only increasing the size of the GBT tasks


. . Nope, they announced that all the WUs would be 4 bit even though the names may not say so.

Stephen

:)
ID: 1890772 · Report as offensive
Speedy
Volunteer tester
Avatar

Send message
Joined: 26 Jun 04
Posts: 1643
Credit: 12,921,799
RAC: 89
New Zealand
Message 1890774 - Posted: 19 Sep 2017, 9:22:24 UTC - in response to Message 1890772.  


Has anybody else noticed that the size of all work units are same roughly 705 kilobytes since they increased the the size of work units? I thought they were only increasing the size of the GBT tasks


. . Nope, they announced that all the WUs would be 4 bit even though the names may not say so.

Stephen

:)

Thank you for the clarification
ID: 1890774 · Report as offensive
Iona
Avatar

Send message
Joined: 12 Jul 07
Posts: 790
Credit: 22,438,118
RAC: 0
United Kingdom
Message 1890788 - Posted: 19 Sep 2017, 23:46:18 UTC

That was close....was down to my last 7 GPU tasks.
Don't take life too seriously, as you'll never come out of it alive!
ID: 1890788 · Report as offensive
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 1890791 - Posted: 19 Sep 2017, 23:53:17 UTC - in response to Message 1890788.  

That was close....was down to my last 7 GPU tasks.


. . Made it by a whisker ...

Stephen

:)
ID: 1890791 · Report as offensive
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13164
Credit: 1,160,866,277
RAC: 1,873
United States
Message 1890834 - Posted: 20 Sep 2017, 1:47:20 UTC - in response to Message 1890791.  

Made it by a whisker too on my Windows systems. I ran out on my Linux system mainly because I made an effort not to exceed the BOINC 1000 task limit this time.
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 1890834 · Report as offensive
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 1890842 - Posted: 20 Sep 2017, 3:44:24 UTC - in response to Message 1890834.  

Made it by a whisker too on my Windows systems. I ran out on my Linux system mainly because I made an effort not to exceed the BOINC 1000 task limit this time.


. . I don't know if you noticed, or if it is only me, but a HUGE percentage of the GBT tasks I received yesterday turned out to be noise bombs. At first I thought I had another rig ready to fall over when I saw task after task end at a few seconds. But I checked on my other 2 rigs and was seeing the same thing on them. That would reduce the run time of your cache if it was the same for you.

Stephen

:(
ID: 1890842 · Report as offensive
Grant (SSSF)
Volunteer tester

Send message
Joined: 19 Aug 99
Posts: 13855
Credit: 208,696,464
RAC: 304
Australia
Message 1890854 - Posted: 20 Sep 2017, 4:45:35 UTC - in response to Message 1890842.  

. . I don't know if you noticed, or if it is only me, but a HUGE percentage of the GBT tasks I received yesterday turned out to be noise bombs.

I've got plenty of those noisy WUs, and the Returned in the last hour numbers are over 120,000- so It looks like there are still a lot of them out there, making their way back to the servers.
Grant
Darwin NT
ID: 1890854 · Report as offensive
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13164
Credit: 1,160,866,277
RAC: 1,873
United States
Message 1890866 - Posted: 20 Sep 2017, 6:05:36 UTC - in response to Message 1890842.  


. . I don't know if you noticed, or if it is only me, but a HUGE percentage of the GBT tasks I received yesterday turned out to be noise bombs. At first I thought I had another rig ready to fall over when I saw task after task end at a few seconds. But I checked on my other 2 rigs and was seeing the same thing on them. That would reduce the run time of your cache if it was the same for you.

Stephen

:(

No I noticed the noise bombs too. I had to make a quick round robin through the crunchers to make sure all were still healthy. Everything checked out and realized they were real noise bombs, but I am a little edgy with the linux machine since it can run through a bunch real quick and produce invalids as I found out a couple weeks ago.
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 1890866 · Report as offensive
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 1890875 - Posted: 20 Sep 2017, 6:30:24 UTC - in response to Message 1890866.  


No I noticed the noise bombs too. I had to make a quick round robin through the crunchers to make sure all were still healthy. Everything checked out and realized they were real noise bombs, but I am a little edgy with the linux machine since it can run through a bunch real quick and produce invalids as I found out a couple weeks ago.


. . I know that feeling. that was what bothered me. I restarted BOINC and they were still doing it, so I restarted the rig and they were still doing it. That was when I checked the other rigs. It was a relief to see they had the same thing happening.

Stephen

:)
ID: 1890875 · Report as offensive
Previous · 1 . . . 18 · 19 · 20 · 21 · 22 · 23 · 24 . . . 29 · Next

Message boards : Number crunching : Panic Mode On (107) Server Problems?


 
©2024 University of California
 
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.