Managed to kill so many GPUs

Message boards : Number crunching : Managed to kill so many GPUs
Message board moderation

To post messages, you must log in.

1 · 2 · Next

AuthorMessage
elec999 Project Donor

Send message
Joined: 24 Nov 02
Posts: 375
Credit: 416,969,548
RAC: 141
Canada
Message 1876913 - Posted: 5 Jul 2017, 17:09:21 UTC

Good Day,
The following have died on me recently

NVIDIA
GTX Titan
780
550ti

AMD
280x

The computers were all in a air conditioner environment and not over heating or anything. There is no dust in the systems.

Is it me or just normal for GPUs to die?

Thank you
ID: 1876913 · Report as offensive
Profile Wiggo
Avatar

Send message
Joined: 24 Jan 00
Posts: 34744
Credit: 261,360,520
RAC: 489
Australia
Message 1876918 - Posted: 5 Jul 2017, 17:20:16 UTC

It must be just you as I've only had 1 die on me and that was a long time ago with a 9800GT whose fan decided to take a tour around other parts of the case at the time while I wasn't around. :-)

Cheers.
ID: 1876918 · Report as offensive
Profile Darrell
Volunteer tester
Avatar

Send message
Joined: 14 Mar 03
Posts: 267
Credit: 1,418,681
RAC: 0
United States
Message 1876923 - Posted: 5 Jul 2017, 17:47:30 UTC

At first I was going to mention a bad power supply, but then I looked and saw haw many systems you have. I suppose it could be a weird spike in the mainline power, but then you should have failures of other system components. Data processing on the GPU is hard on it because it drives the clocks high 24/7. With the number of systems that you have and the variety of cards failing, I suspect you're just seeing a normal failure rate and a run of bad luck.
ID: 1876923 · Report as offensive
Profile Mr. Kevvy Crowdfunding Project Donor*Special Project $250 donor
Volunteer moderator
Volunteer tester
Avatar

Send message
Joined: 15 May 99
Posts: 3776
Credit: 1,114,826,392
RAC: 3,319
Canada
Message 1876930 - Posted: 5 Jul 2017, 18:05:10 UTC - in response to Message 1876913.  
Last modified: 5 Jul 2017, 18:07:36 UTC

If you say there is no dust in the systems, you must have one of these:



Otherwise, you may be missing some. One of the best purchases I ever made... pays for itself in a few months not needing those gawdawful weaksauce cans that miss half the dust and spray liquid if they're anything but vertical.
ID: 1876930 · Report as offensive
Profile Zalster Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 27 May 99
Posts: 5517
Credit: 528,817,460
RAC: 242
United States
Message 1876934 - Posted: 5 Jul 2017, 18:11:20 UTC - in response to Message 1876930.  

Yup, best investment I ever made. Man, does it blow out the dust in the case and radiators...
ID: 1876934 · Report as offensive
Profile Mr. Kevvy Crowdfunding Project Donor*Special Project $250 donor
Volunteer moderator
Volunteer tester
Avatar

Send message
Joined: 15 May 99
Posts: 3776
Credit: 1,114,826,392
RAC: 3,319
Canada
Message 1876936 - Posted: 5 Jul 2017, 18:20:37 UTC - in response to Message 1876934.  

Yup, best investment I ever made. Man, does it blow out the dust in the case and radiators...


Nice... didn't know you had one as well. I had recommended them to TBret when he was having dust issues and he bought one ASAP (and loved it.)
So there we go... semi-official GPUUG seal of approval I'd say. :^)
ID: 1876936 · Report as offensive
Profile Jeff Buck Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester

Send message
Joined: 11 Feb 00
Posts: 1441
Credit: 148,764,870
RAC: 0
United States
Message 1876937 - Posted: 5 Jul 2017, 18:26:33 UTC - in response to Message 1876936.  

Yup, best investment I ever made. Man, does it blow out the dust in the case and radiators...


Nice... didn't know you had one as well. I had recommended them to TBret when he was having dust issues and he bought one ASAP (and loved it.)
So there we go... semi-official GPUUG seal of approval I'd say. :^)
Got one here, too. Only complaint I have is that it seems too much air blows out around the seam in the can, which reduces the pressure coming out of the nozzle.
ID: 1876937 · Report as offensive
Profile petri33
Volunteer tester

Send message
Joined: 6 Jun 02
Posts: 1668
Credit: 623,086,772
RAC: 156
Finland
Message 1876943 - Posted: 5 Jul 2017, 19:17:54 UTC

Hi,

A nice apparatus,
Does anyone know if that is available for 230V?

I vacuum every 4 Tuesdays my GPUs from behind and from above but a blow job to remove all stuck hairy balls would do them really good I guess :)

Petri
To overcome Heisenbergs:
"You can't always get what you want / but if you try sometimes you just might find / you get what you need." -- Rolling Stones
ID: 1876943 · Report as offensive
Profile Jeff Buck Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester

Send message
Joined: 11 Feb 00
Posts: 1441
Credit: 148,764,870
RAC: 0
United States
Message 1876944 - Posted: 5 Jul 2017, 19:25:13 UTC - in response to Message 1876943.  

Hi,

A nice apparatus,
Does anyone know if that is available for 230V?

I vacuum every 4 Tuesdays my GPUs from behind and from above but a blow job to remove all stuck hairy balls would do them really good I guess :)

Petri
https://www.amazon.com/dp/B003BZCOKK/ref=psdc_510114_t1_B001U899HQ
ID: 1876944 · Report as offensive
Iona
Avatar

Send message
Joined: 12 Jul 07
Posts: 790
Credit: 22,438,118
RAC: 0
United Kingdom
Message 1876949 - Posted: 5 Jul 2017, 19:35:44 UTC - in response to Message 1876943.  

Hmmm. I think I'll try and avoid the temptation to make a comment, not unlike those from the Carry On films! I used to use an air compressor to clean out my PCs - the dust that thing blew out, was amazing. Maybe you could get a small capacity, cheap one, Petri - if you have a car, you'll soon find other uses for one. Must get myself another one....my ex, took mine and an AC inverter I had for using it on 12V. Can't help thinking that the OPs graphics cards, just have a hard life, although I did originally wonder about the PSU(s) being used.
Don't take life too seriously, as you'll never come out of it alive!
ID: 1876949 · Report as offensive
Profile petri33
Volunteer tester

Send message
Joined: 6 Jun 02
Posts: 1668
Credit: 623,086,772
RAC: 156
Finland
Message 1876962 - Posted: 5 Jul 2017, 20:42:13 UTC - in response to Message 1876944.  

Hi,

A nice apparatus,
Does anyone know if that is available for 230V?

I vacuum every 4 Tuesdays my GPUs from behind and from above but a blow job to remove all stuck hairy balls would do them really good I guess :)

Petri
https://www.amazon.com/dp/B003BZCOKK/ref=psdc_510114_t1_B001U899HQ


I think it is safe to use that one instead of the 110V one I saw. I'll get one. THX.
To overcome Heisenbergs:
"You can't always get what you want / but if you try sometimes you just might find / you get what you need." -- Rolling Stones
ID: 1876962 · Report as offensive
Profile petri33
Volunteer tester

Send message
Joined: 6 Jun 02
Posts: 1668
Credit: 623,086,772
RAC: 156
Finland
Message 1876963 - Posted: 5 Jul 2017, 20:45:55 UTC - in response to Message 1876949.  

Hmmm. I think I'll try and avoid the temptation to make a comment, not unlike those from the Carry On films! I used to use an air compressor to clean out my PCs - the dust that thing blew out, was amazing. Maybe you could get a small capacity, cheap one, Petri - if you have a car, you'll soon find other uses for one. Must get myself another one....my ex, took mine and an AC inverter I had for using it on 12V. Can't help thinking that the OPs graphics cards, just have a hard life, although I did originally wonder about the PSU(s) being used.


The dust. Yes. And in a closed compartment like a car. It really does fly, especially in the eternal sunshine of the northern nights.

I'll dust my car too. Thanks.

Petri
To overcome Heisenbergs:
"You can't always get what you want / but if you try sometimes you just might find / you get what you need." -- Rolling Stones
ID: 1876963 · Report as offensive
Profile Keith Myers Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 29 Apr 01
Posts: 13161
Credit: 1,160,866,277
RAC: 1,873
United States
Message 1876987 - Posted: 5 Jul 2017, 22:28:45 UTC
Last modified: 5 Jul 2017, 22:29:32 UTC

My cheap Harbor Freight 8 gallon/125 psi air compressor was only $25 more than the blower talked about. It has more uses also in powering air tools and keeping the tires at pressure. You need a garage though which also provides the space for defurring the computers and graphics cards.
Seti@Home classic workunits:20,676 CPU time:74,226 hours

A proud member of the OFA (Old Farts Association)
ID: 1876987 · Report as offensive
JohnDK Crowdfunding Project Donor*Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 28 May 00
Posts: 1222
Credit: 451,243,443
RAC: 1,127
Denmark
Message 1876997 - Posted: 5 Jul 2017, 22:55:22 UTC

ID: 1876997 · Report as offensive
Profile petri33
Volunteer tester

Send message
Joined: 6 Jun 02
Posts: 1668
Credit: 623,086,772
RAC: 156
Finland
Message 1876999 - Posted: 5 Jul 2017, 23:45:30 UTC - in response to Message 1876987.  

My cheap Harbor Freight 8 gallon/125 psi air compressor was only $25 more than the blower talked about. It has more uses also in powering air tools and keeping the tires at pressure. You need a garage though which also provides the space for defurring the computers and graphics cards.


This one sounds more like what I need. I can defur all my parts with a suitable nose.

Petri.
To overcome Heisenbergs:
"You can't always get what you want / but if you try sometimes you just might find / you get what you need." -- Rolling Stones
ID: 1876999 · Report as offensive
Profile Wiggo
Avatar

Send message
Joined: 24 Jan 00
Posts: 34744
Credit: 261,360,520
RAC: 489
Australia
Message 1877002 - Posted: 6 Jul 2017, 0:04:14 UTC - in response to Message 1876987.  

My cheap Harbor Freight 8 gallon/125 psi air compressor was only $25 more than the blower talked about. It has more uses also in powering air tools and keeping the tires at pressure. You need a garage though which also provides the space for defurring the computers and graphics cards.

The same goes on here. ;-)

Cheers.
ID: 1877002 · Report as offensive
Profile Brent Norman Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester

Send message
Joined: 1 Dec 99
Posts: 2786
Credit: 685,657,289
RAC: 835
Canada
Message 1877004 - Posted: 6 Jul 2017, 0:11:06 UTC - in response to Message 1876999.  

This one sounds more like what I need. I can defur all my parts with a suitable nose.
Nose?? :))
ID: 1877004 · Report as offensive
kittyman Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 9 Jul 00
Posts: 51468
Credit: 1,018,363,574
RAC: 1,004
United States
Message 1877006 - Posted: 6 Jul 2017, 0:12:50 UTC - in response to Message 1877004.  

This one sounds more like what I need. I can defur all my parts with a suitable nose.
Nose?? :))
Nozzle?
"Freedom is just Chaos, with better lighting." Alan Dean Foster

ID: 1877006 · Report as offensive
Profile petri33
Volunteer tester

Send message
Joined: 6 Jun 02
Posts: 1668
Credit: 623,086,772
RAC: 156
Finland
Message 1877007 - Posted: 6 Jul 2017, 0:13:36 UTC - in response to Message 1877006.  

This one sounds more like what I need. I can defur all my parts with a suitable nose.
Nose?? :))
Nozzle?

You can read me!
To overcome Heisenbergs:
"You can't always get what you want / but if you try sometimes you just might find / you get what you need." -- Rolling Stones
ID: 1877007 · Report as offensive
Profile Wiggo
Avatar

Send message
Joined: 24 Jan 00
Posts: 34744
Credit: 261,360,520
RAC: 489
Australia
Message 1877009 - Posted: 6 Jul 2017, 0:24:08 UTC - in response to Message 1877007.  

This one sounds more like what I need. I can defur all my parts with a suitable nose.
Nose?? :))
Nozzle?

You can read me!

I take it that you mean attachment there.

Cheers.
ID: 1877009 · Report as offensive
1 · 2 · Next

Message boards : Number crunching : Managed to kill so many GPUs


 
©2024 University of California
 
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.