Open Beta test: SoG for NVidia, Lunatics v0.45 - Beta6 (RC again)

Message boards : Number crunching : Open Beta test: SoG for NVidia, Lunatics v0.45 - Beta6 (RC again)
Message board moderation

To post messages, you must log in.

Previous · 1 . . . 13 · 14 · 15 · 16 · 17 · 18 · 19 . . . 32 · Next

AuthorMessage
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 1814776 - Posted: 3 Sep 2016, 6:28:24 UTC - in response to Message 1814770.  



I wasn't quite as late starting. You might want to mention whether has any program able to show the temperature of the GPU - one of mine was overheating.


. . Hi Robert,

. . How is that now?

Stephen
ID: 1814776 · Report as offensive
EdwardPF
Volunteer tester

Send message
Joined: 26 Jul 99
Posts: 389
Credit: 236,772,605
RAC: 374
United States
Message 1814783 - Posted: 3 Sep 2016, 7:05:23 UTC - in response to Message 1814762.  
Last modified: 3 Sep 2016, 7:06:35 UTC

How do I know if it's doing anything different? I look at my queue and it still looks like cuda50 (and a few AP's)??

Ed F

P.S. yes I have GPU-z and EVGA Precision16
ID: 1814783 · Report as offensive
Profile Mike Special Project $75 donor
Volunteer tester
Avatar

Send message
Joined: 17 Feb 01
Posts: 34376
Credit: 79,922,639
RAC: 80
Germany
Message 1814784 - Posted: 3 Sep 2016, 7:13:59 UTC - in response to Message 1814783.  
Last modified: 3 Sep 2016, 7:16:48 UTC

How do I know if it's doing anything different? I look at my queue and it still looks like cuda50 (and a few AP's)??

Ed F

P.S. yes I have GPU-z and EVGA Precision16


You can see this line in stderr after a task is finnished.

OpenCL version by Raistmer, r3500


Of course it will first finnish tasks you already have in your queue.


With each crime and every kindness we birth our future.
ID: 1814784 · Report as offensive
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 1814809 - Posted: 3 Sep 2016, 12:57:04 UTC - in response to Message 1814783.  

How do I know if it's doing anything different? I look at my queue and it still looks like cuda50 (and a few AP's)??

Ed F

P.S. yes I have GPU-z and EVGA Precision16


. . The existing files in your cache will keep the header they have, but new workd will reflect the choice you have made as in "V8.12_OpenCL_SoG"

Stephen
ID: 1814809 · Report as offensive
robertmiles
Volunteer tester

Send message
Joined: 16 Jan 12
Posts: 213
Credit: 4,117,756
RAC: 6
United States
Message 1814893 - Posted: 3 Sep 2016, 22:47:55 UTC - in response to Message 1814776.  
Last modified: 3 Sep 2016, 22:49:47 UTC



I wasn't quite as late starting. You might want to mention whether has any program able to show the temperature of the GPU - one of mine was overheating.


. . Hi Robert,

. . How is that now?

Stephen


A few words got lost. Change "whether has any program" to "whether your computer has any program"

Three relevant threads:

http://setiathome.berkeley.edu/forum_thread.php?id=79704
http://setiathome.berkeley.edu/forum_thread.php?id=79760
http://setiathome.berkeley.edu/forum_thread.php?id=79765

MSI Afterburner is the program I plan to use for adjusting the fan speed for various GPU temperatures.

https://gaming.msi.com/features/afterburner

My GTX 560 now has a GPU temperature of about 70 C, and several recent invalids. It had 80 C and occasional invalids before blowing away the heat sink dust.

It still has occasional Suspicious spike results notices, so I'm planning to try reducing the typical temperature to 60 C.

I have another computer with a GT 440; no definite signs I need to make any more changes on that one.

Note - I'm testing r3500 in the Beta4 package; the SETI applications for NVIDIA GPU improvement - how you can help thread appears to mention some even more recent test versions of the SoG application.

Treat SoG as some people's name for OpenCL plus extra effort toward reducing the amount of data moved between the CPU and the GPU.
ID: 1814893 · Report as offensive
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 1814908 - Posted: 4 Sep 2016, 0:09:59 UTC - in response to Message 1814893.  



. . Hi Robert,

. . How is that now?

Stephen


MSI Afterburner is the program I plan to use for adjusting the fan speed for various GPU temperatures.

My GTX 560 now has a GPU temperature of about 70 C, and several recent invalids. It had 80 C and occasional invalids before blowing away the heat sink dust.

It still has occasional Suspicious spike results notices, so I'm planning to try reducing the typical temperature to 60 C.

Note - I'm testing r3500 in the Beta4 package; the SETI applications for NVIDIA GPU improvement - how you can help thread appears to mention some even more recent test versions of the SoG application.



. . I can recommend Afterburner. One of my GPUs (the GT730) is MSI and it came with Afterburner and I love it. I have my fans set for a fairly aggressive attitude to temps. Nothing much below 30 or 40 deg but then ramps up sharply to 100% by 70 or 75 deg. That tends to keep temps in the 60s at worst.

. . SoG r3500 is a very good package, Raistmer has done some great work and I am putting it through its paces on "my little donkey". Arecibo runtimes don't quite match CUDA50 because the native CUDA implementation is that bit more powerful then the OpenCL implemetation on Nvidia cards, but it is very close, and r3500 does so much better on Greenbank work (guppis) shaving 10 to 20 mins off each WU runtime. I tried it on one other rig too but found it was not quite as productive as running SoG r3430 on that unit (that rig "La_Bamba" is a bit of a cuckoo by nature) so I returned to that for now. But that can change in the future.

Stephen

.
ID: 1814908 · Report as offensive
robertmiles
Volunteer tester

Send message
Joined: 16 Jan 12
Posts: 213
Credit: 4,117,756
RAC: 6
United States
Message 1814943 - Posted: 4 Sep 2016, 3:31:09 UTC
Last modified: 4 Sep 2016, 3:34:18 UTC

Stephen, a link that may be of interest if you decide to do more testing:

SETI Beta
http://setiweb.ssl.berkeley.edu/beta/

Set up as a separate BOINC project. Appears to be testing a few versions beyond r3500.

I'm now starting to test whether Afterburner helps, still for r3500 under beta4.
ID: 1814943 · Report as offensive
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 1814989 - Posted: 4 Sep 2016, 10:48:54 UTC - in response to Message 1814943.  

Stephen, a link that may be of interest if you decide to do more testing:

SETI Beta
http://setiweb.ssl.berkeley.edu/beta/

Set up as a separate BOINC project. Appears to be testing a few versions beyond r3500.

I'm now starting to test whether Afterburner helps, still for r3500 under beta4.


. . I will have a look at the beta site, I hope the increase in fan activity will bring the temps down a bit for you.


Stephen

.
ID: 1814989 · Report as offensive
robertmiles
Volunteer tester

Send message
Joined: 16 Jan 12
Posts: 213
Credit: 4,117,756
RAC: 6
United States
Message 1815088 - Posted: 5 Sep 2016, 0:00:35 UTC

The Afterburner fan profile appears to take effect only if I leave Afterburner running from the console, but will then limit the temperature to 62 C.

I'm about to try a small change aiming for 60 C.
ID: 1815088 · Report as offensive
Profile Jimbocous Project Donor
Volunteer tester
Avatar

Send message
Joined: 1 Apr 13
Posts: 1856
Credit: 268,616,081
RAC: 1,349
United States
Message 1815110 - Posted: 5 Sep 2016, 4:08:23 UTC - in response to Message 1815088.  

The Afterburner fan profile appears to take effect only if I leave Afterburner running from the console, but will then limit the temperature to 62 C.

I'm about to try a small change aiming for 60 C.

Not the most intuitive setup, for sure. I fiddled with it a bit, and never felt comfortable that I knew what it was doing ...
ID: 1815110 · Report as offensive
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 1815140 - Posted: 5 Sep 2016, 6:45:47 UTC - in response to Message 1815088.  

The Afterburner fan profile appears to take effect only if I leave Afterburner running from the console, but will then limit the temperature to 62 C.

I'm about to try a small change aiming for 60 C.


. . Yes, that is a weak point, the profile you create is only within Afterburner, it is not locked into the GPU, so Aftrburner must be running in the backgroud. For me this is not a problem because I have it running all the time to monitor how things are working. I would say 62 deg is a success, hopefully those errors will disappear now.

Stephen
ID: 1815140 · Report as offensive
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 1815141 - Posted: 5 Sep 2016, 6:48:20 UTC - in response to Message 1815110.  

The Afterburner fan profile appears to take effect only if I leave Afterburner running from the console, but will then limit the temperature to 62 C.

I'm about to try a small change aiming for 60 C.

Not the most intuitive setup, for sure. I fiddled with it a bit, and never felt comfortable that I knew what it was doing ...


. . That is surprising to me, I found the fan adjustment very straightforward. Set the curve of how you want the fan to respond to GPU temps and let it go. It was only a matter of moving the set points to where you want them, even add more set points if you want to be creative :)

Stephen
ID: 1815141 · Report as offensive
Profile Jimbocous Project Donor
Volunteer tester
Avatar

Send message
Joined: 1 Apr 13
Posts: 1856
Credit: 268,616,081
RAC: 1,349
United States
Message 1815151 - Posted: 5 Sep 2016, 10:50:14 UTC - in response to Message 1815141.  

The Afterburner fan profile appears to take effect only if I leave Afterburner running from the console, but will then limit the temperature to 62 C.

I'm about to try a small change aiming for 60 C.

Not the most intuitive setup, for sure. I fiddled with it a bit, and never felt comfortable that I knew what it was doing ...


. . That is surprising to me, I found the fan adjustment very straightforward. Set the curve of how you want the fan to respond to GPU temps and let it go. It was only a matter of moving the set points to where you want them, even add more set points if you want to be creative :)

Stephen

Wondering of you were using it with multiple GPUs. Each of my boxes has two, and while I understand the linked/unlinked concept, it didn't seem to quite work that way. This was more to do with things other than fan speed, though ...
ID: 1815151 · Report as offensive
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 1815159 - Posted: 5 Sep 2016, 12:00:10 UTC - in response to Message 1815151.  

The Afterburner fan profile appears to take effect only if I leave Afterburner running from the console, but will then limit the temperature to 62 C.

I'm about to try a small change aiming for 60 C.

Not the most intuitive setup, for sure. I fiddled with it a bit, and never felt comfortable that I knew what it was doing ...


. . That is surprising to me, I found the fan adjustment very straightforward. Set the curve of how you want the fan to respond to GPU temps and let it go. It was only a matter of moving the set points to where you want them, even add more set points if you want to be creative :)

Stephen

Wondering of you were using it with multiple GPUs. Each of my boxes has two, and while I understand the linked/unlinked concept, it didn't seem to quite work that way. This was more to do with things other than fan speed, though ...


. . HI,

. . Well two rigs have single GPU cards but the 3rd has 2 of 'em.

. . They are both GTX970s so there is no issue with the settings. Never tried it with 2 dissimilar cards, but I do believe it can cope with it. I need to check that out.

Stephen

.
ID: 1815159 · Report as offensive
Profile Jimbocous Project Donor
Volunteer tester
Avatar

Send message
Joined: 1 Apr 13
Posts: 1856
Credit: 268,616,081
RAC: 1,349
United States
Message 1815160 - Posted: 5 Sep 2016, 12:02:40 UTC - in response to Message 1815159.  
Last modified: 5 Sep 2016, 12:03:16 UTC

Never tried it with 2 dissimilar cards, but I do believe it can cope with it. I need to check that out.

So, I think at the time I was doing this, both cards were 750tis. I just got my 980s recently.
Also, PM coming your way on another issue ...
ID: 1815160 · Report as offensive
robertmiles
Volunteer tester

Send message
Joined: 16 Jan 12
Posts: 213
Credit: 4,117,756
RAC: 6
United States
Message 1815172 - Posted: 5 Sep 2016, 13:10:16 UTC - in response to Message 1815141.  

The Afterburner fan profile appears to take effect only if I leave Afterburner running from the console, but will then limit the temperature to 62 C.

I'm about to try a small change aiming for 60 C.

Not the most intuitive setup, for sure. I fiddled with it a bit, and never felt comfortable that I knew what it was doing ...


. . That is surprising to me, I found the fan adjustment very straightforward. Set the curve of how you want the fan to respond to GPU temps and let it go. It was only a matter of moving the set points to where you want them, even add more set points if you want to be creative :)

Stephen

I may have found the way to make it run without much attention - click on Fan Speed, then Settings, then General, find General properties, and make sure both Start with Windows and Start minimized are checked.
ID: 1815172 · Report as offensive
Stephen "Heretic" Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 20 Sep 12
Posts: 5557
Credit: 192,787,363
RAC: 628
Australia
Message 1815182 - Posted: 5 Sep 2016, 14:30:36 UTC - in response to Message 1815172.  

The Afterburner fan profile appears to take effect only if I leave Afterburner running from the console, but will then limit the temperature to 62 C.

I'm about to try a small change aiming for 60 C.

Not the most intuitive setup, for sure. I fiddled with it a bit, and never felt comfortable that I knew what it was doing ...


. . That is surprising to me, I found the fan adjustment very straightforward. Set the curve of how you want the fan to respond to GPU temps and let it go. It was only a matter of moving the set points to where you want them, even add more set points if you want to be creative :)

Stephen

I may have found the way to make it run without much attention - click on Fan Speed, then Settings, then General, find General properties, and make sure both Start with Windows and Start minimized are checked.



. . That sounds like a plan.

Stephen
ID: 1815182 · Report as offensive
robertmiles
Volunteer tester

Send message
Joined: 16 Jan 12
Posts: 213
Credit: 4,117,756
RAC: 6
United States
Message 1815188 - Posted: 5 Sep 2016, 15:13:03 UTC - in response to Message 1815182.  
Last modified: 5 Sep 2016, 15:13:20 UTC

The Afterburner fan profile appears to take effect only if I leave Afterburner running from the console, but will then limit the temperature to 62 C.

I'm about to try a small change aiming for 60 C.

Not the most intuitive setup, for sure. I fiddled with it a bit, and never felt comfortable that I knew what it was doing ...


. . That is surprising to me, I found the fan adjustment very straightforward. Set the curve of how you want the fan to respond to GPU temps and let it go. It was only a matter of moving the set points to where you want them, even add more set points if you want to be creative :)

Stephen

I may have found the way to make it run without much attention - click on Fan Speed, then Settings, then General, find General properties, and make sure both Start with Windows and Start minimized are checked.



. . That sounds like a plan.

Stephen

Now 60 C and Afterburner started automatically after the last Windows restart. It will take a day or two to tell if that stopped the invalids from the 560.
ID: 1815188 · Report as offensive
Profile [AF>EDLS]GuL
Volunteer tester

Send message
Joined: 15 Feb 06
Posts: 10
Credit: 27,125,503
RAC: 0
France
Message 1815247 - Posted: 5 Sep 2016, 20:32:23 UTC

Hi all,

Thank you Richard Haselgrove for this application. I have installed lunatics v0.45 beta 4 without any troubles, working on a GTX 780, a HD 4600 and a i5 4670k.

In progress tasks were not killed and they seems to work much faster. Especially, v0.44 was only using 60-90% of the gpu and it is now above 90%.

Cheers
ID: 1815247 · Report as offensive
robertmiles
Volunteer tester

Send message
Joined: 16 Jan 12
Posts: 213
Credit: 4,117,756
RAC: 6
United States
Message 1815485 - Posted: 7 Sep 2016, 1:31:59 UTC - in response to Message 1815188.  


I may have found the way to make it run without much attention - click on Fan Speed, then Settings, then General, find General properties, and make sure both Start with Windows and Start minimized are checked.



. . That sounds like a plan.

Stephen

Now 60 C and Afterburner started automatically after the last Windows restart. It will take a day or two to tell if that stopped the invalids from the 560.[/quote]

Still some invalids at 60 C. Now trying for 55 C.
ID: 1815485 · Report as offensive
Previous · 1 . . . 13 · 14 · 15 · 16 · 17 · 18 · 19 . . . 32 · Next

Message boards : Number crunching : Open Beta test: SoG for NVidia, Lunatics v0.45 - Beta6 (RC again)


 
©2024 University of California
 
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.