Lunatics Windows Installer v0.44 - new release for v8 (required upgrade)

Message boards : Number crunching : Lunatics Windows Installer v0.44 - new release for v8 (required upgrade)
Message board moderation

To post messages, you must log in.

1 · 2 · 3 · 4 . . . 7 · Next

AuthorMessage
Richard Haselgrove Project Donor
Volunteer tester

Send message
Joined: 4 Jul 99
Posts: 14679
Credit: 200,643,578
RAC: 874
United Kingdom
Message 1758148 - Posted: 22 Jan 2016, 11:00:31 UTC
Last modified: 22 Jan 2016, 11:05:09 UTC

Lunatics are pleased to announce the availability of the v0.44 installer in the Lunatics main download area and mirror sites.
Please take care you use the right installer (32/64 bit) for your system.

Because of some slight gremlins with the new Lunatics software, we are distributing the installer as a .zip file this time - you will have to extract the executable file before running it. Sorry about that.

Should you have any questions or problems - ask! Post in this thread or open a new one.

New in this installer:
---------------------
Support for setiathome_v8 tasks recorded at the Arecibo radio telescope, and (in conjunction with Breakthrough Listen) tasks recorded at the Green Bank Observatory and any other suitable radio telescope.

Astropulse applications are unchanged from release v0.43b.

How to use the installer:
------------------------
For the CPU applications, you need to know what your CPU supports. Either check the Boinc startup messages or check with CPU-Z downloadable from http://www.cpuid.com
Tick or untick CPU AP and MB applications as desired.
Tick ATI (OpenCL) AP or MB if/as desired.
Tick NVidia (OpenCL) AP or CUDA MB if/as desired.
Tick Intel (OpenCL) AP or MB if/as desired.
More details further down.

NB We use default values throughout the app_info.xml. If you have previously installed optimised applications and manually edited app_info.xml (e.g. <count> for multithreading GPUs, <flops>, <cmdline> for ATI) you WILL lose those edits on running the installer and have to redo them. You may wish to make a note of them.
You will also lose all other manual edits to app_info.xml such as beta applications.

You are strongly recommended to use a version of BOINC which supports app_config.xml files. These can be used to manage the number of tasks running on each GPU more simply than by editing app_info.xml, and will NOT be removed by re-running this or subsequent installers. If you have previously used an app_config file for MultiBeam v7, you may want to add a similar section for setiathome_v8.

Known issues - general:
----------------------
Be careful when upgrading if you have already pre-installed optimised MB v8 applications from individual pre-release build packs. Some of these packs deploy version numbers derived from Beta testing, and they are not guaranteed to match the Main project release values. This installer follows the application version numbers and plan classes displayed on http://setiathome.berkeley.edu/apps.php - if yours differ, set NNT and drain your cache before proceeding.

TAKE SPECIAL CARE when upgrading from the stock 7.00 Astropulse CPU application. The intermediate checkpoint files have a non-standard format, and the Lunatics applications can't resume a part-computed task. Either set NNT and wait until the current task(s) have finished - may be a long wait - or abort tasks if they haven't progressed very far. This only applies to v7.00 tasks which have commenced processing - v7.03 (sse or sse2) tasks are safe to upgrade while in progress, and all unstarted tasks are safe.

BOINC v7 installations are not able to run any GPU applications in service mode, and the installer will now bypass GPU application pages on machines which cannot run GPU applications because of this restriction.

The installer is supposed to shut down the BOINC client whilst leaving the Manager running - noticeable from the red 'disconnected' dot in the tray. After finishing the BOINC client should restart and the red dot vanish when the Manager reconnects. This may take a few minutes. On some systems however this fails to work. Please ensure BOINC has restarted.
Advanced users only: If you know you are going to edit app_info.xml, it may be easier to shutdown and restart BOINC manually, so you can get the changes into app_info.xml before the restart.

Some users reported that installer v0.41 failed to assemble a complete app_info.xml file from the aistub files supplied with each application. We have switched to using a 'grep' application (supplied) called from a slightly modified 'aimergeg.cmd' script to help avoid this problem. The original aimerge script is also present for people who are used to using it.


CPU MB apps - MB8_win_xxx_VS r3330

In the continuing absence of Joe Segur (we wish him well, wherever he is), we have only been able to provide a limited range of CPU apps - SSE (not applicable to 64-bit platforms), SSE2, SSE3, and AVX. These have been compiled using Microsoft Visual Studio, and may not be as tightly optimised as Joe's wizardry with GCC 4.7.1. When one of the intermediate SIMD levels like SSSE3 or SSE4.1 is detected by the installer and selected, the SSE3 application will be supplied for v8 tasks, but the matching v7 legacy (AKv8c r2549) application will be supplied for cleaning-up leftover v7 tasks.

If you have any doubt at all about what instruction sets your CPU supports, download CPU-Z from http://www.cpuid.com/softwares/cpu-z.html

We have now incorporated a 3rd party CPU feature detection tool into the installer. Unsupported applications will be greyed out, and the installer will pre-select recommended application versions for your CPU.

Users of AMD CPUs capable of running the AVX instruction set may wish to check whether the SSE3 or AVX application is faster on their particular CPU.


CPU AP v7 app - r2672/2692/2696/2703 depending on optimisation level.

A 32-bit AVX build is included as previously. At the SSE3 level, the installer will choose between AMD and Intel builds automatically (there wasn't space for an extra manual choice).


NVidia GPU (CUDA) app - x41zi

The CUDA application is capable of handling both the new v8 and the legacy v7 tasks - there is no need for a separate v7 application. The application will switch modes automatically with no need for user configuration.

For details please see the separate ReadMe_x41zi.txt.

Rule of thumb selection guide:
Cuda 2.3: PreFermi - NOT to be used on Fermi/Kepler/Maxwell
Cuda 3.2: mixed systems
Cuda 4.2: Fermi
Cuda 5.0: Kepler/Maxwell
If you have run stock and have established APR you can also pick the fastest app from there.
For compatible cards see http://developer.nvidia.com/cuda-gpus
Should run on all NVidia CUDA cards with at least 512MiB video RAM. Actual free memory required is in the region of 200-235MB, depending on driver, OS flavour and CUDA variant. The code will scale up if more memory is available. Running on a 256MiB card is just possible, but you will have to free up as much VRAM as possible, e.g. by disabling Aero.
Used video RAM can be checked with GPU-Z downloadable from
http://www.techpowerup.com/downloads/2571/techpowerup-gpu-z-v0-8-6
Watch closely on GPU-Z and in BOINC manager if the application finds enough memory.
Symptoms of insufficient memory are
- in BOINC manager: tasks start up and run a few seconds then go to 'waiting to run' and the next task tries to start
- on GPU-Z: the sensor for memory shows used VRAM ramping up and almost immediately dropping again.

Depending on BOINC version your tasks will either error out with 'too many exits' or get stuck in an infinite loop.
If you don't have enough memory, set BOINC to NNT, abort tasks and uninstall the CUDA application by rerunning the installer with CUDA MB UNticked. If in doubt ask for help in this message board area.
To multithread on Fermi/Kepler cards, find all instances of <count>1</count> in app_info.xml and decrease to 0.5 or 0.3 to run two or three tasks in parallel.
Again, if you are uncertain of how to do this correctly, ask on the above mentioned forum. 'Your mileage may vary' - it depends on your specific system which count will give the highest throughput.
Full release notes and history in separate readme.


NVidia (OpenCL) AP v7 app - retained at r2887

Please see separate ReadMe_AstroPulse_OpenCL_NV.txt for details.
Reserving one CPU core per GPU card will improve performance.

Warning - the NVidia 340.52 driver (released 29 July 2014) causes invalid results on legacy compute capability 1.1, 1.2 and 1.3 cards. This application will - deliberately - NOT run on such cards: it will alternate between displaying a warning message in BOINC Manager and apparently 'running', but will make no progress and eventually error out. If you have an old card (8000 series, 9000 series, or 2xx series), either exclude it from crunching AP, or downgrade to an older driver.

Alternatively, the 'hotfix' 341.44 driver (released 24 February 2015) can be used if available - not all operating system versions are supported.


ATI (OpenCL) MB app - updated to r3330

The new r3330 applications will run v8 tasks ONLY.

The previous r2929 application is supplied again to handle legacy v7 tasks ONLY.

Please see separate ReadMe_MultiBeam_OpenCL_ATI.txt for details, especially on driver requirements.
Reserving one CPU core per GPU card will improve performance.
We offer the MB application in two different variants, depending on card:
plain - for most HD4xxx owners and those with HD5xxx, HD6xxx cards and HD7xxx cards who suffer from driver incompatibilities.
HD5 - for most if not all owners of HD5xxx, HD6xxx and HD7xxx GPUs.


ATI (OpenCL) AP v7 app - retained at r2742
ATI (Brook) AP app - retained at r2904

Please see separate ReadMe_AstroPulse_OpenCL_ATI.txt or ReadMe_AstroPulse_Brook.txt for details, especially on driver requirements.
Reserving one CPU core per GPU card will improve performance.

For cards without OpenCL support (from HD2xxxx on) use the 'hybrid' r2904 Astropulse application. NB this is a combined CPU/GPU application and will only use the GPU for some of the calculations, while doing the rest on a CPU core. Minimum driver version Catalyst 9.x.

The Hybrid AP application uses about 80% of a CPU core and does only about 20% of the calculations on the GPU. Parameters have been choosen to reflect this usage. However present BOINC can not reserve '0.8' of a CPU core and therefore reserves none. This means your CPUs will be overcommitted and runtimes and DCF (if applicable) will suffer. You do increase the overall output though.

HD2xxx cards requiring Brook (Hybrid) applications are once again supported by Lunatics for Astropulse v7.


Intel (OpenCL) applications for both MB and AP v7 (updated to r3330/r2742)

The new r3330 applications will run v8 tasks ONLY.

The previous r2929 application is supplied again to handle legacy v7 tasks ONLY.

These are now offered by Lunatics. Please note the supported iGPU models, and observe the minimum OpenCL and driver versions, shown on the selection page. Intel CPUs offering plain "HD graphics" may be able to run these applications, with a suitable driver, but have not been exhaustively tested. Please verify that tasks run on these devices are validating consistently before allowing them to run unattended.

You MUST update your Intel driver if BOINC reports the OpenCL version as 1.1
The applications may appear to run without updating the driver, but the results will not be valid and you will have wasted your computing power.

Visit https://downloadcenter.intel.com/ if you require an updated graphics driver for your iGPU. Note that you will require a driver for a 3rd. or 4th. generation Intel 'core' CPU with the appropriately numbered HD or Iris graphics support.

Many people have reported problems getting Intel's automated update and installation tools to work, but their manual installation instructions (requiring the download of the '.zip' driver package) appear to work on systems which reject the automated tools. A copy of Intel's ReadMe file for driver installation will be placed in the Lunatics docs folder for reference if you select either of the iGPU applications.


This time the thanks go to Raistmer for the optimised CPU apps, to Raistmer (with additional input from Urs Echternacht) for OpenCL apps and to Jason (jason_gee) for CUDA apps.
Thanks guys. There would be no need for an optimised app installer if there weren't optimised apps in the first place!

We would also like to take this opportunity to thank our active alpha testers
(in no particular order and apologies to anybody we've forgotten):
Claggy, arkayn and Mike.


The Lunatics Installer team AD MMXVI
ID: 1758148 · Report as offensive
Profile Vidar87
Avatar

Send message
Joined: 14 Mar 10
Posts: 5
Credit: 24,327,005
RAC: 0
Norway
Message 1758155 - Posted: 22 Jan 2016, 11:19:27 UTC - in response to Message 1758148.  

Thanks :) :)
ID: 1758155 · Report as offensive
Profile Dr Grey

Send message
Joined: 27 May 99
Posts: 154
Credit: 104,147,344
RAC: 21
United Kingdom
Message 1758160 - Posted: 22 Jan 2016, 11:42:17 UTC

Well that went well from my, end-user, point of view. Lunatics download was a bit slow - maybe a bit of a logjam immediately after the announcement. But the installation was slick and BOINC immediately went and downloaded 70 GPU v8s. One completed straight away in 5 s, two more in just over 8 minutes.
Looking good.

Thanks to everyone involved.
ID: 1758160 · Report as offensive
Profile Mr. Kevvy Crowdfunding Project Donor*Special Project $250 donor
Volunteer moderator
Volunteer tester
Avatar

Send message
Joined: 15 May 99
Posts: 3806
Credit: 1,114,826,392
RAC: 3,319
Canada
Message 1758166 - Posted: 22 Jan 2016, 11:57:13 UTC - in response to Message 1758162.  

And by lunchtime Friday. Very well done to those that had a hand in it, Richard, William, and others.


Absolutely... I thought I'd at least have to wait a few days. I guess it helps that the unofficial developers have become the official developers. :^) Excellent job and thanks!
ID: 1758166 · Report as offensive
Sleepy
Volunteer tester
Avatar

Send message
Joined: 21 May 99
Posts: 219
Credit: 98,947,784
RAC: 28,360
Italy
Message 1758180 - Posted: 22 Jan 2016, 12:38:17 UTC - in response to Message 1758148.  
Last modified: 22 Jan 2016, 12:39:22 UTC

Great work!

Thank you!

Installed and running fine!

I will have to reconfigure all the <Counts> and the likes, though. But I knew beforehand about that, so no surprise and a planned thing to do.
Everything backed up, so no worries. Just some minor work to be done after restarting.

But everybody remember that Lunatics resets to default all the Counts and the sorts tags in your configuration files!
Which, they cannot help do differently, and in cases like this is advisable for everybody to restart from default and test step by step all the switches.

Thank you again!

Sleepy
ID: 1758180 · Report as offensive
Mark Stevenson Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 8 Sep 11
Posts: 1736
Credit: 174,899,165
RAC: 91
United Kingdom
Message 1758181 - Posted: 22 Jan 2016, 12:40:41 UTC - in response to Message 1758162.  
Last modified: 22 Jan 2016, 12:41:01 UTC

And by lunchtime Friday. Very well done to those that had a hand in it, Richard, William, and others


+1 I would buy all involved in the new installer a pint if I could :-)
Life is what you make of it :-)

When i'm good i'm very good , but when i'm bad i'm shi#eloads better ;-) In't I " buttercups " p.m.s.l at authoritie !!;-)
ID: 1758181 · Report as offensive
kittyman Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 9 Jul 00
Posts: 51478
Credit: 1,018,363,574
RAC: 1,004
United States
Message 1758182 - Posted: 22 Jan 2016, 12:40:44 UTC

The kitties give a thumbs up and a hearty hurrah to all that contributed to the Lunatics efforts.......

A++++++++++++++++++++++++++++++++++

And meow meow meow!
"Time is simply the mechanism that keeps everything from happening all at once."

ID: 1758182 · Report as offensive
Profile Mike Special Project $75 donor
Volunteer tester
Avatar

Send message
Joined: 17 Feb 01
Posts: 34379
Credit: 79,922,639
RAC: 80
Germany
Message 1758188 - Posted: 22 Jan 2016, 13:08:30 UTC

The new Lunatics installer is now also available on my website.

http://mikesworldnet.de/download.html


With each crime and every kindness we birth our future.
ID: 1758188 · Report as offensive
baron_iv
Volunteer tester
Avatar

Send message
Joined: 4 Nov 02
Posts: 109
Credit: 104,905,241
RAC: 0
United States
Message 1758211 - Posted: 22 Jan 2016, 15:13:06 UTC

Thanks for all your hard work on these installers, folks. I know this is a lot of hours that you all spent and you're doing it because you're passionate, not because you're being paid. I really appreciate it. :)

I do have a request for 0.45 though (whenever that finally comes out), could you make a setting where it changes the <count> to 0.50 or 0.33 based upon how many instances the person feels is appropriate for their particular setup? I had to spend about 20 minutes going through and changing all the 1s to 0.50s and 0.33s (and I've had to do this a number of times before too), it would be really great if there were a way to change it in the installer and then the proper count could be set in the app_info. I'm not sure if that's something that's even possible, but it would save a lot of people a lot of time (and potential mistakes).

Again, thanks and all the best to you.
-baron_iv
Proud member of:
GPU Users Group
ID: 1758211 · Report as offensive
Profile William
Volunteer tester
Avatar

Send message
Joined: 14 Feb 13
Posts: 2037
Credit: 17,689,662
RAC: 0
Message 1758214 - Posted: 22 Jan 2016, 15:18:50 UTC - in response to Message 1758211.  
Last modified: 22 Jan 2016, 15:20:28 UTC

that's a tad difficult, but you just gave me an idea. I'll run it past Richard, maybe we can rustle up something for the next version using app_config.xml (boinc versions 7.0.40+ only)

NB theses days if you have a v7 BOINC it's far easier to use app_config.xml instead of changing counts in app_info.xml, plus the installer doesn't touch app_config.xml (yet).
A person who won't read has no advantage over one who can't read. (Mark Twain)
ID: 1758214 · Report as offensive
David S
Volunteer tester
Avatar

Send message
Joined: 4 Oct 99
Posts: 18352
Credit: 27,761,924
RAC: 12
United States
Message 1758221 - Posted: 22 Jan 2016, 15:55:36 UTC
Last modified: 22 Jan 2016, 15:58:15 UTC

If I understand correctly, these apps are the same as the stock apps, and you expect to be releasing optimized apps later.

If I am correct, couldn't I just delete (rename) my app_info and let the box run stock for now? Would that hurt me on AP?

(No offense intended to all those who have worked on this and the hours they have put into it, it's just that what I'm proposing would get me running v8 on my GPU now instead of several hours from now. A simple change I can do via Teamviewer, but I'm a bit leery of major messing when I'm not there in front of the screen.)
David
Sitting on my butt while others boldly go,
Waiting for a message from a small furry creature from Alpha Centauri.

ID: 1758221 · Report as offensive
Richard Haselgrove Project Donor
Volunteer tester

Send message
Joined: 4 Jul 99
Posts: 14679
Credit: 200,643,578
RAC: 874
United Kingdom
Message 1758225 - Posted: 22 Jan 2016, 16:07:07 UTC - in response to Message 1758221.  

My shift on the desk. Yes, that's right - but the transition back from Anonymous Platform to stock isn't as easy as in the opposite direction.

You can't preserve cached work. If you don't want aborted/abandoned work to blot your record, use 'No New Tasks' to finish all current work and report it before switching back. After deleting the app_info file, restart BOINC, and then click 'reset project' before allowing new work again.

Note that you will get a more limited set of AP applications from the project, including the dreadfully slow unoptimised basic version.

Using app_config.xml (check for missing brackets when people partially quote other people's posts) is probably the best way to go, and repays study.
ID: 1758225 · Report as offensive
David S
Volunteer tester
Avatar

Send message
Joined: 4 Oct 99
Posts: 18352
Credit: 27,761,924
RAC: 12
United States
Message 1758228 - Posted: 22 Jan 2016, 16:13:22 UTC - in response to Message 1758225.  
Last modified: 22 Jan 2016, 16:18:55 UTC

My shift on the desk. Yes, that's right - but the transition back from Anonymous Platform to stock isn't as easy as in the opposite direction.

You can't preserve cached work. If you don't want aborted/abandoned work to blot your record, use 'No New Tasks' to finish all current work and report it before switching back. After deleting the app_info file, restart BOINC, and then click 'reset project' before allowing new work again.

Note that you will get a more limited set of AP applications from the project, including the dreadfully slow unoptimised basic version.

Using app_config.xml (check for missing brackets when people partially quote other people's posts) is probably the best way to go, and repays study.

Ah. Okay. Letting it run the ~99 CPU tasks it has now would probably take much longer than waiting until I get home. So I will just wait and install it then.

[edit]
Do I understand this correctly?

app_info contains all the instructions for what app to use for each kind of work, and CAN set how many tasks to run at a time on the GPU. app_config can (among other things, I suppose) override the <count> setting in app_info.

Or do I have that backwards?
David
Sitting on my butt while others boldly go,
Waiting for a message from a small furry creature from Alpha Centauri.

ID: 1758228 · Report as offensive
Profile Jord
Volunteer tester
Avatar

Send message
Joined: 9 Jun 99
Posts: 15184
Credit: 4,362,181
RAC: 3
Netherlands
Message 1758236 - Posted: 22 Jan 2016, 16:43:19 UTC

Well, there's warning in it. When you run Mike's previous r3299 application on the AMD GPU, make sure to set NNT and run the cache down, before using the Lunatics updater, because his application ran tasks named ati_opencl_sah

So that you do not see things like I just did:
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding
22/01/2016 17:39:39 | SETI@home | [error] No application found for task: windows_intelx86 800 ati_opencl_sah; discarding

I have one AP left in cache, yay!
ID: 1758236 · Report as offensive
Richard Haselgrove Project Donor
Volunteer tester

Send message
Joined: 4 Jul 99
Posts: 14679
Credit: 200,643,578
RAC: 874
United Kingdom
Message 1758238 - Posted: 22 Jan 2016, 17:00:21 UTC - in response to Message 1758236.  

Well, there's warning in it. When you run Mike's previous r3299 application on the AMD GPU, make sure to set NNT and run the cache down, before using the Lunatics updater, because his application ran tasks named ati_opencl_sah

I have one AP left in cache, yay!

Sorry about that, but it does give me an opportunity to emphasis this paragraph from the opening post:

Be careful when upgrading if you have already pre-installed optimised MB v8 applications from individual pre-release build packs. Some of these packs deploy version numbers derived from Beta testing, and they are not guaranteed to match the Main project release values. This installer follows the application version numbers and plan classes displayed on http://setiathome.berkeley.edu/apps.php - if yours differ, set NNT and drain your cache before proceeding.

I do ask the developers not to make pre-release packs available for public download without making it explicitly clear whether they are configured for Main project or Beta use, but some slip through the net.
ID: 1758238 · Report as offensive
Profile Jeff Buck Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester

Send message
Joined: 11 Feb 00
Posts: 1441
Credit: 148,764,870
RAC: 0
United States
Message 1758243 - Posted: 22 Jan 2016, 17:27:05 UTC

Should I assume that the installer will still be unable to detect SSE2 for the Pentium M on my old ThinkPad, and that a manual install of MB8_win_x86_SSE2_VS2008_r3330.exe will be necessary instead? (That's not a problem, but I just wanted to check if anything had changed from previous installers.)
ID: 1758243 · Report as offensive
Richard Haselgrove Project Donor
Volunteer tester

Send message
Joined: 4 Jul 99
Posts: 14679
Credit: 200,643,578
RAC: 874
United Kingdom
Message 1758251 - Posted: 22 Jan 2016, 17:44:42 UTC - in response to Message 1758243.  

Should I assume that the installer will still be unable to detect SSE2 for the Pentium M on my old ThinkPad, and that a manual install of MB8_win_x86_SSE2_VS2008_r3330.exe will be necessary instead? (That's not a problem, but I just wanted to check if anything had changed from previous installers.)

Nothing has changed there, I'm afraid. If that worked for you last time, it's likely to be the best approach this time too.
ID: 1758251 · Report as offensive
Profile Jeff Buck Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester

Send message
Joined: 11 Feb 00
Posts: 1441
Credit: 148,764,870
RAC: 0
United States
Message 1758260 - Posted: 22 Jan 2016, 17:57:46 UTC - in response to Message 1758251.  

Should I assume that the installer will still be unable to detect SSE2 for the Pentium M on my old ThinkPad, and that a manual install of MB8_win_x86_SSE2_VS2008_r3330.exe will be necessary instead? (That's not a problem, but I just wanted to check if anything had changed from previous installers.)

Nothing has changed there, I'm afraid. If that worked for you last time, it's likely to be the best approach this time too.

Okay, thanks Richard. I remember that Joe Segur had offered an explanation about the detection issue on those older CPUs a long time ago, but I don't recall the details at the moment (without digging into some very old posts, anyway).
ID: 1758260 · Report as offensive
Grant (SSSF)
Volunteer tester

Send message
Joined: 19 Aug 99
Posts: 13854
Credit: 208,696,464
RAC: 304
Australia
Message 1758305 - Posted: 22 Jan 2016, 20:35:43 UTC - in response to Message 1758260.  

A big thank you to the Lunatics group for their efforts.
Grant
Darwin NT
ID: 1758305 · Report as offensive
Dave Lewis

Send message
Joined: 12 Apr 99
Posts: 34
Credit: 53,432,603
RAC: 108
United States
Message 1758308 - Posted: 22 Jan 2016, 20:56:38 UTC - in response to Message 1758305.  

A big thank you to the Lunatics group for their efforts.


I double down on what Grant said. A big thanks to all involved.
ID: 1758308 · Report as offensive
1 · 2 · 3 · 4 . . . 7 · Next

Message boards : Number crunching : Lunatics Windows Installer v0.44 - new release for v8 (required upgrade)


 
©2024 University of California
 
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.