Message boards :
Number crunching :
Panic Mode On (98) Server Problems?
Message board moderation
Previous · 1 . . . 19 · 20 · 21 · 22 · 23 · 24 · 25 . . . 30 · Next
Author | Message |
---|---|
Jeff Buck Send message Joined: 11 Feb 00 Posts: 1441 Credit: 148,764,870 RAC: 0 |
Well, initially I'll try just adding <slot_debug> to cc_config under 7.2.33 and see if anything interesting pops. I might be upgrading that xw9400 from XP to Win 7 this weekend and, if it doesn't go as smoothly as I'd like, I might have to reinstall everything else, too, in which case perhaps I'll go ahead and try v7.6.2. Heh, I see I'll have to increase the size of the log file on the xw9400 when I start it back up again tonight (it's only running on a limited schedule). My daily driver just finished its first task with <slot_debug> turned on and it spewed out an extra 21 lines of messages. The xw9400 typically has 16 tasks running concurrently and would probably blow through that log file in a matter of hours with the current allocation. BTW, regarding the slot juggling that's occurring on Keith's machine, when we first started kicking this around a year and a half ago, in Strange Invalid MB Overflow tasks with truncated Stderr outputs..., it initially seemed like that slot juggling was consistent. After more observation, however, it seemed some truncations did occur without changing slots for the succeeding task, so there did seem to be some exceptions to that "rule". |
Richard Haselgrove Send message Joined: 4 Jul 99 Posts: 14679 Credit: 200,643,578 RAC: 874 |
Well, initially I'll try just adding <slot_debug> to cc_config under 7.2.33 and see if anything interesting pops. I might be upgrading that xw9400 from XP to Win 7 this weekend and, if it doesn't go as smoothly as I'd like, I might have to reinstall everything else, too, in which case perhaps I'll go ahead and try v7.6.2. Yes, the second of the example logs I attached to the boinc_dev report exhibited that behaviour. In the last iteration round this problem (What causes a Blank stderr?), I posted the flowchart: 1) Delete everything in the slot folder on task exit 2) Delete everything - i.e. anything remaining - in the slot before reuse 3) Don't reuse the slot if (2) fails In the first example today, BOINC couldn't delete stderr.txt at either step (1) or step (2) - so a different, higher-numbered, slot was used for the next task. When that task finished, BOINC retried the original slot again - and found the file could now be deleted, so the original slot was reused. In the second example, BOINC couldn't delete stderr.txt at step (1), but succeeded at step (2) - so there was no need to take the escape route at step (3). |
Speedy Send message Joined: 26 Jun 04 Posts: 1643 Credit: 12,921,799 RAC: 89 |
I feel 2 June AC maybe be stuck as it is sitting at (14) and has been for at least the last hour more like 2 on the AP side holding a splitter up Edit: tape has now been cleared |
OTS Send message Joined: 6 Jan 08 Posts: 371 Credit: 20,533,537 RAC: 0 |
(...) That might be the case or it might be something else. I have noted that when I have the cache set for 8 days and AP only, if I select ½ day cache and also to accept both AP and MBs at the same time, I seem to get big slug of MBs that I really did not want as if the cache was still set at 8 days. If on the other hand I set the cache for ½ day, force a client update and then ask for both MBs and APs after that, then I get just a half a days worth of MBs. I have been attributing that behavior to the possibility that the server and client interact and decide what needs to be downloaded before the new configuration I asked for is noted. It appears there are certain configurations that only seem to work after the second client contact. Of course I could be adding 2 and 2 and getting 5 but that is what I have found. |
Wiggo Send message Joined: 24 Jan 00 Posts: 36852 Credit: 261,360,520 RAC: 489 |
I take it that there must be a VLAR storm going on seeing as I'm finding it hard to keep my GPU's cache full? OTOH my CPU's have a 169 AP's between them so far. :-) Cheers. |
Grant (SSSF) Send message Joined: 19 Aug 99 Posts: 13855 Credit: 208,696,464 RAC: 304 |
AP assimilators appear to have called a halt. 3,600 & growing rapidly. Grant Darwin NT |
Brent Norman Send message Joined: 1 Dec 99 Posts: 2786 Credit: 685,657,289 RAC: 835 |
I noticed that too, I have a feeling they are merging databases. |
TBar Send message Joined: 22 May 99 Posts: 5204 Credit: 840,779,836 RAC: 2,768 |
I hate to be a KillJoy, however, has anyone looked at the SSP recently? It appears ALL the splitters except 2 MB splitters are Dead, All the AP cache is gone, the MB cache is rapidly falling, and the Current result creation rate is in the pits. It may be time to Panic... |
Zalster Send message Joined: 27 May 99 Posts: 5517 Credit: 528,817,460 RAC: 242 |
Yes I noticed it about 6 hours ago but was trying to avoid panic by not saying anything. There was surplus of APs at the time. I had hoped they just turned them off for some maintenance but looks like i was wrong, AGAIN!!! lol |
Cactus Bob Send message Joined: 19 May 99 Posts: 209 Credit: 10,924,287 RAC: 29 |
Ya, I also noticed the creation rate was under 1 but hoped it wasn't a trend. OH well!!! PANIC !!!!! Bob edit: The good news (for me) Is I have 200 AP's I just crunched my last MB edit 2: arrgghh !! no tasks available for astropuilse V7 Down to 194 now --- sniff Sometimes I wonder, what happened to all the people I gave directions to? ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ SETI@home classic workunits 4,321 SETI@home classic CPU time 22,169 hours |
rob smith Send message Joined: 7 Mar 03 Posts: 22537 Credit: 416,307,556 RAC: 380 |
...at least its only a few hours to the weekly outrage when hopefully they will kick the splitters into life again. Bob Smith Member of Seti PIPPS (Pluto is a Planet Protest Society) Somewhere in the (un)known Universe? |
Grant (SSSF) Send message Joined: 19 Aug 99 Posts: 13855 Credit: 208,696,464 RAC: 304 |
Ready to send = 0. Splitter output = 0. I knew it had to happen; every time my RAC recovers & is almost back to it's usual levels, things fall over to clobber it again. Grant Darwin NT |
Wiggo Send message Joined: 24 Jan 00 Posts: 36852 Credit: 261,360,520 RAC: 489 |
That would be right, just as my main rig has almost caught my 2nd rig again. :-( Oh well, my GPU backup project is ready to go so I won't get cold. ;-) Cheers. |
Admiral Gloval Send message Joined: 31 Mar 13 Posts: 21302 Credit: 5,308,449 RAC: 0 |
GPU is almost dry. Have enough CPU to make it to shutdown. After that. My CPU is going to start sucking air. |
Wiggo Send message Joined: 24 Jan 00 Posts: 36852 Credit: 261,360,520 RAC: 489 |
My main rig's GPU's will be out of work by the time the outrage gets started, the other 1's GPU's maybe lucky and make it through. Cheers. |
JaundicedEye Send message Joined: 14 Mar 12 Posts: 5375 Credit: 30,870,693 RAC: 1 |
Woke up this AM, pushed the power button on my main rig only to hear the lovely chorus of Beeeep......Beep,Beep,Beep,Beep. !!!!!!!!GRRRRRR. It's only 15 months old for God's sake! Reseated the GTX 750 and the memory, no change. No display, and 4 beeps. Reseated all again, rebooted and got display went into bios and found the message "CPU Fan Error". I replaced the Hyper 212 heat sink and fan and all is good. It was making noise yesterday and I guess a bearing went in the fan motor, the blade would not spin freely. After replacing the entire unit, I discovered the little clip-on mounts that attach the fan to the heat sink were removable and a standard 120mm fan could be replaced without removing the sink...........!!!!!!!!!!!Grrrrrrrrrr. Oh well, it's fixed and SIV says the CPU temps are running between 55-62C. And that's the reason I don't fix other people's PCs anymore, it's too frustrating for a man my age. "Sour Grapes make a bitter Whine." <(0)> |
Phil Burden Send message Joined: 26 Oct 00 Posts: 264 Credit: 22,303,899 RAC: 0 |
Well, although Main is back up, downloads don't appear to be working properly. They're taking an age to come down.. P. |
Admiral Gloval Send message Joined: 31 Mar 13 Posts: 21302 Credit: 5,308,449 RAC: 0 |
Any interesting but short wu's project? My backup is Climate prediction. I do not want to get a data set from them that will take up to a week to finish. Let alone three I know they will give me. |
HAL9000 Send message Joined: 11 Sep 99 Posts: 6534 Credit: 196,805,888 RAC: 57 |
Any interesting but short wu's project? My backup is Climate prediction. I do not want to get a data set from them that will take up to a week to finish. Let alone three I know they will give me. My main backup projects are For CPU: MilkyWay@Home or Asteroids@home For ATI GPUs: PrimeGrid or Collatz Conjecture SETI@home classic workunits: 93,865 CPU time: 863,447 hours Join the [url=http://tinyurl.com/8y46zvu]BP6/VP6 User Group[ |
Cosmic_Ocean Send message Joined: 23 Dec 00 Posts: 3027 Credit: 13,516,867 RAC: 13 |
I replaced the Hyper 212 heat sink and fan and all is good. It was making noise yesterday and I guess a bearing went in the fan motor, the blade would not spin freely. After replacing the entire unit, I discovered the little clip-on mounts that attach the fan to the heat sink were removable and a standard 120mm fan could be replaced without removing the sink...........!!!!!!!!!!!Grrrrrrrrrr. You can take that fan that won't spin and bring it back to life most likely. Peel the sticker back on the back-side of it and there may or may not be a rubber seal/plug under the sticker. Being a 120mm fan, it can easily take 2-3 drops of motor oil (like you put in the engine of your car). Add the oil, wipe up any mess you made on the surface the sticker sticks to, put the rubber plug back in and put the sticker back on. Spin the fan by hand a bit and you'll feel it loosen up. Then it should be a usable fan again. The rear exhaust fan on my case has been oiled twice. I haven't had to oil it in almost 3 years now though, so I expect that it is probably going to be due before long. Linux laptop: record uptime: 1511d 20h 19m (ended due to the power brick giving-up) |
©2024 University of California
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.