Message boards :
Number crunching :
cpu heatsink/fan
Message board moderation
Author | Message |
---|---|
merle van osdol Send message Joined: 23 Oct 02 Posts: 809 Credit: 1,980,117 RAC: 0 |
I am looking at the cooler master v8 gts for my socket 1150 cpu. In the write-ups on amazon and on the cooler master web site they say it's for an 1150, 775 sockets among others. However when you download the manual from their site, the installation instructions only talk about socket 775. Are they just sloppy with all of this gibberish. It looks like a powerful air cooler that would work as long as all the dimensions check out with my memory-sticks but how can I reply on it fitting on an 1150 socket? |
Bhagwanmike Send message Joined: 4 Jun 99 Posts: 44 Credit: 23,324,969 RAC: 31 |
Hi there, Site specs from Cooler Master are as follows: Model RR-V8VC-16PR-R1 CPU Socket Intel® LGA 2011-3/2011/1366/1156/1155/1150/775 AMD FM2+/FM2/FM1/AM3+/AM3 /AM2 Dimensions (LxWxH) 154 x 149.8 x 166.5mm (6.1 x 5.9 x 6.6 in) Heat Sink Dimensions (LxWxH) 154 x 140 x 153.5mm (6.1 x 5.5 x 6.0 in) Heat Sink Material Vapor Chamber / 8 Heat Pipes / Aluminum Fins Heat Sink Weight 854g (1.9lb) Heat Pipe Dimensions Ø6mm Fan Dimensions Ø 140 x 20 mm (5.5 x 0.8 inch) Fan Speed 600 – 1,600 RPM (PWM) ± 10% Fan Air Flow 28 – 82 CFM ± 10% Fan Air Pressure 0. 3 – 1.45 mmH2O ± 10% Fan Life Expectancy 160,000 hrs Noise Level 16~36 dBA Bearing Type POM bearing – Cooler Master 4th Gen. Bearing (*POM = Polyoxymethylene) Connector 4-Pin Rated Voltage 12 VDC Rated Current 0.31A Power Consumption 3.72W Fan Weight 110g (0.24 lb) x 2 |
Bhagwanmike Send message Joined: 4 Jun 99 Posts: 44 Credit: 23,324,969 RAC: 31 |
Install manual at link: http://www.coolermaster.com/xresserver01-DLFILE-P130607000186b8-F130607000241d5.html has installs for combined LGA 1366/1156/1155/1150/775, and some separate instructions for LGA 2011. Hope this helps. Also remember your case and RAM clearances, too! |
merle van osdol Send message Joined: 23 Oct 02 Posts: 809 Credit: 1,980,117 RAC: 0 |
Many thanks Mike, Somehow I got the manual off the site for V8 but not V8 GTS. I'm good on my case clearance height. I still have to figure for my memory sticks and I'll wait on that 'til I get them on the MB and measured. merle - vote yes for freedom of speech |
©2024 University of California
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.