Max temp for getting the normal life out of a video card?

Message boards : Number crunching : Max temp for getting the normal life out of a video card?
Message board moderation

To post messages, you must log in.

1 · 2 · 3 · Next

AuthorMessage
merle van osdol

Send message
Joined: 23 Oct 02
Posts: 809
Credit: 1,980,117
RAC: 0
United States
Message 1573786 - Posted: 18 Sep 2014, 11:07:52 UTC

I have heard 67C. from one source. Any other opinions?
I generally buy new ati/amd cards.
ID: 1573786 · Report as offensive
Darth Beaver Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Avatar

Send message
Joined: 20 Aug 99
Posts: 6728
Credit: 21,443,075
RAC: 3
Australia
Message 1573790 - Posted: 18 Sep 2014, 11:36:13 UTC

Depends on the GPU

Cooler is always better

A good New card should have a good fan and then it should not get above 58 c on a hot summers day if the normal air temp is 35 c .

I would not run a card if it's getting above 70 C

A lot of cards can be fine at 75-80 but that is getting risky to have it at that temp 24/7 as most will burn out at 90 > or get temp sensitive at above 80 c meaning they start to give errors

current card is GTX 650 Nvidia air temp 23 c , card 48 c fan 52% , min speed of fan with air temp of 12 c , 50% , card temp 40 c

Good cards with big heat sink and a big fan should not have any problems these days
ID: 1573790 · Report as offensive
merle van osdol

Send message
Joined: 23 Oct 02
Posts: 809
Credit: 1,980,117
RAC: 0
United States
Message 1573796 - Posted: 18 Sep 2014, 12:15:08 UTC - in response to Message 1573790.  

Thanks Glen,
That gives me some parameters to work with.
ID: 1573796 · Report as offensive
qbit
Volunteer tester
Avatar

Send message
Joined: 19 Sep 04
Posts: 630
Credit: 6,868,528
RAC: 0
Austria
Message 1573888 - Posted: 18 Sep 2014, 17:02:37 UTC

Don't know about ATI, but my GTX750 usually is somewhere between 48 and 63 degrees with the fan running between 34% and 37%. I have never seen the fan running higher then 37%, so I guess the temperatures are ok.
My old card (the mighty G210:-)) was running a bit more on the hot side, AFAIR it usually was around or slightly above 70 degrees when crunching. It wasn't running 24/7 (neither is my current card) but I never had the feeling that those temperatures are too high. The old card still works today but was just too slow and had to be replaced.
ID: 1573888 · Report as offensive
Profile Michel Makhlouta
Volunteer tester
Avatar

Send message
Joined: 21 Dec 03
Posts: 169
Credit: 41,799,743
RAC: 0
Lebanon
Message 1574223 - Posted: 19 Sep 2014, 8:23:46 UTC

my MSI 780 TF usually idles around 48C and while crunching it gets to 68C, sometimes 72C while gaming. All running in OC mode using the gaming app that's provided by MSI.

On the card's website, MSI claims that the capacitors have a life span of 10 years on 85C, and 18 on 75C. So I consider 75C to be the limit on my card, I wouldn't worry while temps are below that.

Finally summer is almost over, room temperature is between 30C and 35C. What's the ATI card, and which brand is it? Have you checked your manufacturers website and datasheets?
ID: 1574223 · Report as offensive
merle van osdol

Send message
Joined: 23 Oct 02
Posts: 809
Credit: 1,980,117
RAC: 0
United States
Message 1574229 - Posted: 19 Sep 2014, 9:20:00 UTC - in response to Message 1574223.  
Last modified: 19 Sep 2014, 9:44:50 UTC

Thanks Michel,
Both of the cards I'm concerned about are MSI, so your message hits right on the spot. (7770 and r7 265)

--edit

I went to the MSI website but didn't find anything about temps for my model #'s.
ID: 1574229 · Report as offensive
Profile Michel Makhlouta
Volunteer tester
Avatar

Send message
Joined: 21 Dec 03
Posts: 169
Credit: 41,799,743
RAC: 0
Lebanon
Message 1574317 - Posted: 19 Sep 2014, 15:15:52 UTC - in response to Message 1574229.  

It seems that the r7 265 has the military class components, same capacitors as the GTX 780. From that perspective, I would assume the same values. I've checked some benchmarks and while gaming it is usually around 60C. I don't know about ATI, but if MSI has an application for overclocking your card, you might want to try it. I've had lower temperatures with OC mode on my 780.

As for the other card, I am not sure. I would say anything below 80 should be fine for both cards, you might want to consider 75C as a soft limit, to be on the safe side. What are your current temps while running seti? how many WU are you running on each card?

MSI Afterburner is a good tool for GPU, you might want to check how your fans are behaving as well.
ID: 1574317 · Report as offensive
merle van osdol

Send message
Joined: 23 Oct 02
Posts: 809
Credit: 1,980,117
RAC: 0
United States
Message 1574359 - Posted: 19 Sep 2014, 16:01:32 UTC - in response to Message 1574317.  
Last modified: 19 Sep 2014, 16:03:16 UTC

I only run one task at a time. The temps are 58-64C. The fan on the r7 I leave at 100% since it runs fairly quiet. The 7770 fan is usually around 70%.

I think Hal told me to only run one task at a time on my cards, if I remember correctly, but it was kind of hectic back then. You get the problem where the gpu's get slowed down by those heavily blanked tasks and have to rely on the pace of the cpu's.
ID: 1574359 · Report as offensive
Profile HAL9000
Volunteer tester
Avatar

Send message
Joined: 11 Sep 99
Posts: 6534
Credit: 196,805,888
RAC: 57
United States
Message 1574393 - Posted: 19 Sep 2014, 16:33:26 UTC - in response to Message 1574359.  

I only run one task at a time. The temps are 58-64C. The fan on the r7 I leave at 100% since it runs fairly quiet. The 7770 fan is usually around 70%.

I think Hal told me to only run one task at a time on my cards, if I remember correctly, but it was kind of hectic back then. You get the problem where the gpu's get slowed down by those heavily blanked tasks and have to rely on the pace of the cpu's.

Even if it was someone else. For these range cards it is probably good to run only 1 AP at a time. If the non blanked tasks are keeping the load up pretty high more than 1 isn't really a benefit. Also when mixing GPUs you either have to setup for the slowest one or run multiple instances of BOINC.

I leave the fan on my HD6870 on auto. On a hot day with the windows open the fan spins up to about 55% from 40-45%. While keeping the GPU at the same temp as when the A/C going is on. I would have to check the temp logs but I think it stays well under 60ºC all of the time.
I leave the fan on auto to hopefully get as much life out of the fan as possible. Because a dead fan is a fairly likely way to have a dead GPU.
SETI@home classic workunits: 93,865 CPU time: 863,447 hours
Join the [url=http://tinyurl.com/8y46zvu]BP6/VP6 User Group[
ID: 1574393 · Report as offensive
merle van osdol

Send message
Joined: 23 Oct 02
Posts: 809
Credit: 1,980,117
RAC: 0
United States
Message 1574407 - Posted: 19 Sep 2014, 16:50:56 UTC - in response to Message 1574393.  
Last modified: 19 Sep 2014, 16:55:32 UTC

Thanks for the comment on the fans. I wasn't sure how sturdy the fans were. I burnt out a 4670 doing collatz/boinc and it was probably running the fan at 100% all the time.
ID: 1574407 · Report as offensive
merle van osdol

Send message
Joined: 23 Oct 02
Posts: 809
Credit: 1,980,117
RAC: 0
United States
Message 1574412 - Posted: 19 Sep 2014, 16:58:49 UTC - in response to Message 1574407.  

I'm getting too hooked on this stuff. I just bought a dell with a r9 260 as my graphic card and I just swore the other day I wanted out of the dell hook up.
But I saw this pretty little thing for a nice price and I just had to do it.
Didn't even have a choice. That's it, no more stuff.
ID: 1574412 · Report as offensive
Profile BilBg
Volunteer tester
Avatar

Send message
Joined: 27 May 07
Posts: 3720
Credit: 9,385,827
RAC: 0
Bulgaria
Message 1574423 - Posted: 19 Sep 2014, 17:25:16 UTC - in response to Message 1574407.  

I burnt out a 4670 doing collatz/boinc and it was probably running the fan at 100% all the time.

Get TThrottle
http://efmer.com/b/

Using it the GPU will not overheat even the fan stops
 


- ALF - "Find out what you don't do well ..... then don't do it!" :)
 
ID: 1574423 · Report as offensive
merle van osdol

Send message
Joined: 23 Oct 02
Posts: 809
Credit: 1,980,117
RAC: 0
United States
Message 1574426 - Posted: 19 Sep 2014, 17:31:09 UTC - in response to Message 1574423.  

thanks BilBg
ID: 1574426 · Report as offensive
Profile HAL9000
Volunteer tester
Avatar

Send message
Joined: 11 Sep 99
Posts: 6534
Credit: 196,805,888
RAC: 57
United States
Message 1574476 - Posted: 19 Sep 2014, 18:54:44 UTC - in response to Message 1574412.  

I'm getting too hooked on this stuff. I just bought a dell with a r9 260 as my graphic card and I just swore the other day I wanted out of the dell hook up.
But I saw this pretty little thing for a nice price and I just had to do it.
Didn't even have a choice. That's it, no more stuff.

You might want some ointment. As it seems you have been bitten by the bug.
SETI@home classic workunits: 93,865 CPU time: 863,447 hours
Join the [url=http://tinyurl.com/8y46zvu]BP6/VP6 User Group[
ID: 1574476 · Report as offensive
merle van osdol

Send message
Joined: 23 Oct 02
Posts: 809
Credit: 1,980,117
RAC: 0
United States
Message 1574537 - Posted: 19 Sep 2014, 20:06:06 UTC - in response to Message 1574476.  

lol
ID: 1574537 · Report as offensive
merle van osdol

Send message
Joined: 23 Oct 02
Posts: 809
Credit: 1,980,117
RAC: 0
United States
Message 1576493 - Posted: 23 Sep 2014, 11:04:06 UTC - in response to Message 1574393.  

Hal,

I leave the fan on my HD6870 on auto. On a hot day with the windows open the fan spins up to about 55% from 40-45%. While keeping the GPU at the same temp as when the A/C going is on. I would have to check the temp logs but I think it stays well under 60ºC all of the time.
I leave the fan on auto to hopefully get as much life out of the fan as possible. Because a dead fan is a fairly likely way to have a dead GPU.


Do you always use auto? When I left my r7 265 on auto, I had a temp as high as 76C which bothers me a little.
ID: 1576493 · Report as offensive
Profile HAL9000
Volunteer tester
Avatar

Send message
Joined: 11 Sep 99
Posts: 6534
Credit: 196,805,888
RAC: 57
United States
Message 1576531 - Posted: 23 Sep 2014, 13:01:32 UTC - in response to Message 1576493.  

Hal,

I leave the fan on my HD6870 on auto. On a hot day with the windows open the fan spins up to about 55% from 40-45%. While keeping the GPU at the same temp as when the A/C going is on. I would have to check the temp logs but I think it stays well under 60ºC all of the time.
I leave the fan on auto to hopefully get as much life out of the fan as possible. Because a dead fan is a fairly likely way to have a dead GPU.


Do you always use auto? When I left my r7 265 on auto, I had a temp as high as 76C which bothers me a little.

Given the options for the fan on the GPU are auto or a single fixed speed I use auto. Then the fan runs at the percent specified by the card manufacture. There are probably apps to tune the fan speeds at various temps. Like I can do with my MB for the CPU and chassis fans, but I haven't bother to go that route.

I recently bought a 2nd 6870 off of ebay for $40 to put in my HTPC. That card runs a bit warmer than the one in my gaming machine. I am seeing up to 74ºC with the fan running around 60%. I tested various manual settings in the HTPC to see how much of an effect they would have. At 100% it would drop to about 62ºC, but at that point the fan noise is rather terrible. Anything over 75% I didn't care for in the way of noise. I'm OK with the temperature of the GPU. So long as it runs without generating errors.
I may try turning the fan speed down and let the temp go up to see at what point it will generate errors. Then I will have a good measure of "this is to hot".

Next summer I may swap the 5750 back in the system or get a newer more efficient GPU to keep the noise down for that system. Because I don't want to try and watch a movie over the sound of a jet trying to take off in the living room.
SETI@home classic workunits: 93,865 CPU time: 863,447 hours
Join the [url=http://tinyurl.com/8y46zvu]BP6/VP6 User Group[
ID: 1576531 · Report as offensive
merle van osdol

Send message
Joined: 23 Oct 02
Posts: 809
Credit: 1,980,117
RAC: 0
United States
Message 1576534 - Posted: 23 Sep 2014, 13:10:39 UTC - in response to Message 1576531.  

Thanks man,
You're always a help.
ID: 1576534 · Report as offensive
Profile HAL9000
Volunteer tester
Avatar

Send message
Joined: 11 Sep 99
Posts: 6534
Credit: 196,805,888
RAC: 57
United States
Message 1576536 - Posted: 23 Sep 2014, 13:18:21 UTC

I will also add that all of my cards are from Sapphire. Who has had a reputation for making quality cards since the days of ATI building their own cards.
I think they would be the ATI equivalent of EVGA. If that makes sense to you.
SETI@home classic workunits: 93,865 CPU time: 863,447 hours
Join the [url=http://tinyurl.com/8y46zvu]BP6/VP6 User Group[
ID: 1576536 · Report as offensive
Profile Mike Special Project $75 donor
Volunteer tester
Avatar

Send message
Joined: 17 Feb 01
Posts: 34380
Credit: 79,922,639
RAC: 80
Germany
Message 1576538 - Posted: 23 Sep 2014, 13:25:38 UTC

Agreed HAL.

My Sapphire 7970 VaporX is on auto as well.
It doesn`t get above 62°C.


With each crime and every kindness we birth our future.
ID: 1576538 · Report as offensive
1 · 2 · 3 · Next

Message boards : Number crunching : Max temp for getting the normal life out of a video card?


 
©2024 University of California
 
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.