Message boards :
Number crunching :
Show and tell your machine. Here's mine.
Message board moderation
Previous · 1 · 2 · 3 · 4 · 5 · 6 · 7 . . . 20 · Next
Author | Message |
---|---|
Mike Send message Joined: 17 Feb 01 Posts: 34353 Credit: 79,922,639 RAC: 80 |
Here is my cruncher. Assus Sabertooth 990FX AMD FX 8350 Noctua D 14 Cooler AMD HD 7970 With each crime and every kindness we birth our future. |
Zalster Send message Joined: 27 May 99 Posts: 5517 Credit: 528,817,460 RAC: 242 |
|
Batter Up Send message Joined: 5 May 99 Posts: 1946 Credit: 24,860,347 RAC: 0 |
A good time to remove dust is when the cover is off. |
Zalster Send message Joined: 27 May 99 Posts: 5517 Credit: 528,817,460 RAC: 242 |
Those were after pictures, you don't want to know how much dust bunnies were in there, lol. Ah..I see what you are talking about..Yup, going to have to go back and get the compressed air can for that... |
BMH Send message Joined: 27 May 99 Posts: 419 Credit: 166,294,083 RAC: 125 |
Zalster, those pictures remind me of those puzzle pictures where you have to count how many of something you see... I thought I was seeing three graphics cards... but then I scrolled past again and then spotted another! Batter Up, there is a problem with your rule... what if the cover is always off?! For me a good time to remove dust is when the power is off, but I don't always wait. Brian. |
Zalster Send message Joined: 27 May 99 Posts: 5517 Credit: 528,817,460 RAC: 242 |
Ok, here is a new build I did over the weekend. Took apart another machine but this one supposed to have better air flow. Case is divided into 2 separate compartments. Left side for MB, GPU,CPU,HD. Right for PSU, DVD, SSD, and all the cables. Not going to post all the pics, here is a link for all of them http://s95.photobucket.com/user/doczal/slideshow/New%20build Note HD in lower right corner in a built in slot for it. Finally configuration of GPUs, 1 GTX750 TI sc ACX slot 0 2 GTX650 Ti Boost slots 1,2 1 GTX750 TI sc slot 3 View of the 2 140 intake fans in front, 2 140s pulling air thru the radiator up top and the liquid cooler for the CPU View of the case from the front minus the filters over the fans The PSU, DVD drive, SSD (if I had any) are on the right side of the case. Brian, now you don't have to go searching for them, they are all nicely laid out, lol... Zalster |
zoom3+1=4 Send message Joined: 30 Nov 03 Posts: 66216 Credit: 55,293,173 RAC: 49 |
My current PC is in need of an upgrade cause of a dying motherboard, so far I have a i7 3820 cpu installed in an EVGA X79 Classified, the case will be an Azza 9000B(if I can get one in July as they are out of production) and then a Cooler Master Nepton 140XL or a 280L(I'm not sure yet), Here's the pic of the cpu and motherboard, oh and I paid close to $177 before shipping for the cpu since it came from France, the shipping was $48.40. I'll eventually equip the motherboard with 16GB of 1866MHz G.Skill Ripjaws X ram(2x8GB Dimms), for the moment I'll just transfer My 16GB of 1333MHz Ripjaws X ram. This case allows for expansion that I'll need. Savoir-Faire is everywhere! The T1 Trust, T1 Class 4-4-4-4 #5550, America's First HST |
Batter Up Send message Joined: 5 May 99 Posts: 1946 Credit: 24,860,347 RAC: 0 |
Ok, here is a new build I did over the weekend. Just in time for the summer. My current PC is in need of an upgrade cause of a dying motherboard, so far I have a i7 3820 cpu installed in an EVGA X79 Classified,... Now all you need are 4 GTX Titan Zs. |
zoom3+1=4 Send message Joined: 30 Nov 03 Posts: 66216 Credit: 55,293,173 RAC: 49 |
Ok, here is a new build I did over the weekend. Not with My income level, those cards cost nearly as much as I get per month, no I'm sticking with either 570 or 580 cards, which I have two of now, I know they are not new, for the moment the psu is a Silverstone ST1500 1500w power supply. Savoir-Faire is everywhere! The T1 Trust, T1 Class 4-4-4-4 #5550, America's First HST |
Batter Up Send message Joined: 5 May 99 Posts: 1946 Credit: 24,860,347 RAC: 0 |
At $3,000 each before tax NVIDIA is testing the market. The Titan at $1,000 must have sold better than they thought it would. Maybe I could rent one for a month. |
zoom3+1=4 Send message Joined: 30 Nov 03 Posts: 66216 Credit: 55,293,173 RAC: 49 |
A $1000? Wow, that's beyond what I get per month, I'll pass. Besides I have 5 water blocks for either 570 or 580 cards, not the HD types I might add. Savoir-Faire is everywhere! The T1 Trust, T1 Class 4-4-4-4 #5550, America's First HST |
KC5VDJ - Jim the Enchanter Send message Joined: 17 May 99 Posts: 81 Credit: 4,083,597 RAC: 0 |
Is that a Ultra-AXi Mobo? I used to have two of them at 300 MHz (UltraSPARC-II AXi CPUs). I still have the OBP updates archived on my warez drive. Delidded i7-4790K (CLU/CLU) at 4.7GHz @ 1.310Vcore 24/7, 32GB DDR3-2400, Corsair H100i v2, Gigabyte Z97X-Gaming G1 WIFI-BK, MSI Radeon RX 480 Gaming 4G, HX-650 PSU, Corsair 750D |
KC5VDJ - Jim the Enchanter Send message Joined: 17 May 99 Posts: 81 Credit: 4,083,597 RAC: 0 |
Is that a Ultra-AXi Mobo? I used to have two of them at 300 MHz (UltraSPARC-II AXi CPUs). I still have the OBP updates archived on my warez drive. Wait, no. It can't be. Mine had PCI-X, not PCIe., and no SATA. Delidded i7-4790K (CLU/CLU) at 4.7GHz @ 1.310Vcore 24/7, 32GB DDR3-2400, Corsair H100i v2, Gigabyte Z97X-Gaming G1 WIFI-BK, MSI Radeon RX 480 Gaming 4G, HX-650 PSU, Corsair 750D |
tullio Send message Joined: 9 Apr 04 Posts: 8797 Credit: 2,930,782 RAC: 1 |
I think it is a SuperMicro Mobo but I can't be sure. Too many years have passed, but it is still running. Computers become old, as we do. Now I just ordered a new HP desktop, wtth AMD APU A-10 6700 running at 3.7 GHz, while the Opteron 1210 is till crunching at 1.8 GHz. When I receive it I shall post a picture. Tullio yes it should be either a H8SMi-2 or a H8SMA-2, can't remember which. |
Darth Beaver Send message Joined: 20 Aug 99 Posts: 6728 Credit: 21,443,075 RAC: 3 |
Jim I've noticed a few people have those cone things around there cpu's do they have much effect on the temps . I'm thinking my machine is getting hot because the air flows out onto the ram and is pushed up and back into the cpu fan and therefore it's not so efficient . Could any of you with this set up give me a idea how much of a difference it makes And 1 last thing did you make it or can you buy them as i notice it has it looks like it's got some sort of frame ? |
tullio Send message Joined: 9 Apr 04 Posts: 8797 Credit: 2,930,782 RAC: 1 |
The front panel on the SUN WS visible two posts before this is a grid like the radiator of my old Lancia Aprilia. The CPU has a fan and the PSU also. Notice that being on top it does not heat the mbo. There is a fan on the back panel getting air out the box. The instructions on the manual were not to dismount the side panel in order not to disturb the airflow. Since it has been running since January 2008 the instructions were sound. Tullio |
ML1 Send message Joined: 25 Nov 01 Posts: 21017 Credit: 7,508,002 RAC: 20 |
... I've noticed a few people have those cone things around there cpu's do they have much effect on the temps ... Yes, if your case has the matching side vent to align with the 'cone' opening. In effect you get another air intake rather than recirculating air with the case. And if you don't have or can't find a suitable plastic cone... Then with a little care you can easily make your own with scissors, tape and some card. (Take care to ensure there is no additional force put on the heatsink/fan/CPU.) As a bonus, you may even get your system to be a little quieter also. Happy cool crunchin', Martin See new freedom: Mageia Linux Take a look for yourself: Linux Format The Future is what We all make IT (GPLv3) |
KC5VDJ - Jim the Enchanter Send message Joined: 17 May 99 Posts: 81 Credit: 4,083,597 RAC: 0 |
Jim I've noticed a few people have those cone things around there cpu's do they have much effect on the temps . Actually, that's Tulio's box. As for the "cone" thing, that was used in a lot of cases in the early/mid 00's. It is an isolated intake, that leads to, and is flush with, a hole in the side of the case. It kinda prevents what you are talking about by ensuring that only ambient air reaches intake side of the cpu fan. A LOT of Pentium 4 cases had this, especially the smaller constrained cases. I wish mine had one, because I only have a small space for air intake along the bottom of my power supply. The power supply in my chassis mounts above the motherboard. It's a very nice Mini-ITX chassis here, but, it's tight inside. Maximum thermal solution size here is 80mm. My current heat sink is sitting at 71mm high with the aftermarket 25mm thick fan (it came with a sleeve bearing 12mm thick fan with half the flow of the current fan). The keep-out zone for air intake is not that large. Delidded i7-4790K (CLU/CLU) at 4.7GHz @ 1.310Vcore 24/7, 32GB DDR3-2400, Corsair H100i v2, Gigabyte Z97X-Gaming G1 WIFI-BK, MSI Radeon RX 480 Gaming 4G, HX-650 PSU, Corsair 750D |
KC5VDJ - Jim the Enchanter Send message Joined: 17 May 99 Posts: 81 Credit: 4,083,597 RAC: 0 |
Go ahead and delete those, I'm going to try using photobucket instead. Uploading now. I wish I had some current pics, as this doesn't show the fan upgrade to the heatsink. I'm not pulling that stuff out again until it's time to dust out the fins, probably this winter. Although other brands are starting to get the fan filters, Lian Li has been doing them for years. It doesn't stop the small dust though, and a couple/few times a year, you have to blow out the fine stuff. Delidded i7-4790K (CLU/CLU) at 4.7GHz @ 1.310Vcore 24/7, 32GB DDR3-2400, Corsair H100i v2, Gigabyte Z97X-Gaming G1 WIFI-BK, MSI Radeon RX 480 Gaming 4G, HX-650 PSU, Corsair 750D |
KC5VDJ - Jim the Enchanter Send message Joined: 17 May 99 Posts: 81 Credit: 4,083,597 RAC: 0 |
The following pictures were made prior to installing the aftermaket fan on the heatsink. What pisses me off, is that a month and a half after buying this board, they came out with the Z97E-ITXac (http://www.asrock.com/mb/Intel/Z97E-ITXac/) for the same price. ASRock Z87E-ITX, i7-4770K (lapped to mirror finish), 8GB Team Vulcan DDR3-2400 http://www.asrock.com/mb/Intel/Z87E-ITX/ Top view Side view showing RAM Side view showing heatpipes The Orb completed Professional chair commandeering cat, Flash Gordon the Rocket Kitteh Although I would like a larger setup, and even SLI, there is a lot to be said for a nice Mini-ITX setup. Delidded i7-4790K (CLU/CLU) at 4.7GHz @ 1.310Vcore 24/7, 32GB DDR3-2400, Corsair H100i v2, Gigabyte Z97X-Gaming G1 WIFI-BK, MSI Radeon RX 480 Gaming 4G, HX-650 PSU, Corsair 750D |
©2024 University of California
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.