The other option causes more overhead, it stops and starts the application.

Why boinc works that way? Why not always working instead of "start-stop"?

There are many ways to run Boinc......stock....take what you get.
Opti....takes some additional input and upkeep to stay current.
You can choose what you wish.

If you want to 'set and forget', Boinc will do the best it can for you.
And it does pretty well, if you properly tell it what you want.

---

"Learn from yesterday. Live for today. Hope for tomorrow." Albert Einstein
"With cats." kittyman

The other option causes more overhead, it stops and starts the application.

Why boinc works that way? Why not always working instead of "start-stop"?

---

By your command !!!

I run WUs on all my available cores & 2 at a time on the GPU. No responsiveness problems.

Same here on my Athlon X2 system, 2 CPU tasks (2 cores without HT) + 2 tasks on the GPU. No issues, only for watching HD movies or playing games I suspend GPU processing.

---

I run a six core AMD Phenom with a GTX460. I run six CPU tasks and two GPU tasks all the time with no response problems - even rotating big Autocad models its smooth enough (but I could do with a faster GPU as even without S@H running it can be a bit notchy - HOW MUCH!!!! for a GTX690, and will I be able to afford it before Nvidia drop the 790 on the market?)

---

Bob Smith
Member of Seti PIPPS (Pluto is a Planet Protest Society)
Somewhere in the (un)known Universe?

The way I have my i7 2600K setup is that I have 4 physical cores running at 100%, this keeps all cores relatively busy. Using Hyperthreading on the the i7, which simulates 8 cores, leaves 4 virtual cores "free". These are used to run apps and feed my GPU - nVidia 580gtx.

I run WUs on all my available cores & 2 at a time on the GPU. No responsiveness problems.

---

Grant
Darwin NT

I went the other way completely, all GPU and no CPU.

The other extreme.

---

TThrottle Control your temperatures. BoincTasks The best way to view BOINC. Anza Borrego Desert hiking.

I choosed 3 cores at 100%.

lol It was late when I wrote that, I forgot that the i3's are only dual core. I was mainly used to demonstrate the point that a less powerful CPU may struggle under workloads that a more powerful CPU would breeze through.

The way I have my i7 2600K setup is that I have 4 physical cores running at 100%, this keeps all cores relatively busy. Using Hyperthreading on the the i7, which simulates 8 cores, leaves 4 virtual cores "free". These are used to run apps and feed my GPU - nVidia 580gtx.

This setup leaves the computer fluid and responsive for general use as we as enabling sufficient data flow to/from the GPU.

If I leave the PC running 24x7 it will reach RAC scores of over 40K, so it seems to work well for me.

Cheers

Mark

I went the other way completely, all GPU and no CPU.

---

lol It was late when I wrote that, I forgot that the i3's are only dual core. I was mainly used to demonstrate the point that a less powerful CPU may struggle under workloads that a more powerful CPU would breeze through.

The way I have my i7 2600K setup is that I have 4 physical cores running at 100%, this keeps all cores relatively busy. Using Hyperthreading on the the i7, which simulates 8 cores, leaves 4 virtual cores "free". These are used to run apps and feed my GPU - nVidia 580gtx.

This setup leaves the computer fluid and responsive for general use as we as enabling sufficient data flow to/from the GPU.

If I leave the PC running 24x7 it will reach RAC scores of over 40K, so it seems to work well for me.

Cheers

Mark

---

The i3-380M has 2 physical cores but with hyperthreading can run as 4 logical cores (4 threads per Intel's convention).

The "2 running at 100%" scenario with hyperthreading on would be somewhat different from turning hyperthreading off, though Windows does understand about hyperthreading so would likely keep the 2 processes divided between the physical cores. In either case, "4 running at 50%" would be less productive. The general experience is that hyperthreading can increase productivity by maybe 25 to 30 percent when no other limitations are applied (4 at 100%).

The host also has an "ATI Radeon HD 5x00 series (Cedar) (512MB)" which could be used for AP processing. That's an additional reason to consider the 3 at 100% configuration Mark suggested. Having one logical core free to do the OS stuff and feed the GPU when it's crunching would IMO be best overall.

If there is concern about temperatures, using TThrottle is probably a better solution than BOINC's method of controlling usage.

                                                                 Joe

Depends what your 4 cores are apart of, what your other application loads are, and how much memory you have.

4 cores on an Intel i7 are going to be more powerful than 4 cores on an Intel i3

Your application load may be light in relation to an i7, but heavy on an i3

And RAM wise running 2 copies (2 cores only) will use less RAM than 4 cores (4 seti copies)

Swapping to/from hard disk is also increased using 4 cores - however given a large enough write to disk time this is also negligible.

My recommendation would be to run 3 cores at 100% and see what the computers response is running other apps.

(Just make sure your CPU/Case has adequate cooling - CPU temps should stay under 85C to ensure long term cpu life.)

Just my 2c worth :)

Cheers

Mark

---

Of 4 cores : 2 running at 100% or 4 running at 50% ?

2 running at 100%
The other option causes more overhead, it stops and starts the application.

---

TThrottle Control your temperatures. BoincTasks The best way to view BOINC. Anza Borrego Desert hiking.

Of 4 cores : 2 running at 100% or 4 running at 50% ?

The answer to the question "Which is the best CPU configuration?" would be 4 cores @100%. What are the reasons, that you want your machine to idle half of the time?

---

Of 4 cores : 2 running at 100% or 4 running at 50% ?

It depends on your goal:
If you want the best crunching performance, both settings will be almost the same, probably 2 cores at 100% will be slightly better than 4 at 50% due to the overload caused by the constant start and stop of the threads.
If you want a more responsive system for other tasks, then use 2 cores at 100%.
If you want less heat, then use all of them throttled, but in this case it would be even better to use the Throttle app as it can be set to do a dynamic throttle based on the temps...

---

Of 4 cores : 2 running at 100% or 4 running at 50% ?