ATI GPU problem

Message boards : Number crunching : ATI GPU problem
Message board moderation

To post messages, you must log in.

1 · 2 · Next

AuthorMessage
Profile AlienDancer
Volunteer tester
Avatar

Send message
Joined: 8 Sep 99
Posts: 68
Credit: 12,473,416
RAC: 0
Message 1123055 - Posted: 30 Jun 2011, 18:31:21 UTC

Finally got some tasks for my GPU but everyone of them fails with the message "error while computing". The event log contains the messages below. Jobs using cpu seem to be ok. I had some errors on cpu when I first used lunatics installer but that was because I had jobs running when I did the install. The cpu jobs seem ok now but gpu receives errors. Grr when it rains it pours I run for years with out problems then this week I have two machines with issues. The other one was caused by kaspersky which occasionally decides to change the settings back to its own for Bionic. Got that one solved but can't determine what's wrong with the GPU. Can someone help? I have turned off the GPU for now.

6/30/2011 2:28:23 AM | SETI@home | Starting 28ap11ah.25360.13973.8.10.12_0
6/30/2011 2:28:23 AM | SETI@home | Starting task 28ap11ah.25360.13973.8.10.12_0 using setiathome_enhanced version 610
6/30/2011 2:28:25 AM | SETI@home | Task 28ap11ah.25360.13973.8.10.12_0 exited with zero status but no 'finished' file
6/30/2011 2:28:25 AM | SETI@home | If this happens repeatedly you may need to reset the project.
6/30/2011 2:28:25 AM | SETI@home | Restarting task 28ap11ah.25360.13973.8.10.12_0 using setiathome_enhanced version 610
6/30/2011 2:28:26 AM | SETI@home | Task 28ap11ah.25360.13973.8.10.12_0 exited with zero status but no 'finished' file
6/30/2011 2:28:26 AM | SETI@home | If this happens repeatedly you may need to reset the project.
6/30/2011 2:28:26 AM | SETI@home | Finished download of 26fe11aa.1560.29759.14.10.197
6/30/2011 2:28:26 AM | SETI@home | Started download of 26fe11aa.1560.29759.14.10.211
6/30/2011 2:28:26 AM | SETI@home | Restarting task 28ap11ah.25360.13973.8.10.12_0 using setiathome_enhanced version 610
6/30/2011 2:28:27 AM | SETI@home | Task 28ap11ah.25360.13973.8.10.12_0 exited with zero status but no 'finished' file

ID: 1123055 · Report as offensive
Profile AlienDancer
Volunteer tester
Avatar

Send message
Joined: 8 Sep 99
Posts: 68
Credit: 12,473,416
RAC: 0
Message 1123056 - Posted: 30 Jun 2011, 18:41:25 UTC

part II of question - I was able to suspend the use of the gpu in local preferences but did not see how to stop getting new tasks for gpu. I see where I can stop getting tasks for the NVIDIA GPU but not the ATI. anyone know how to stop getting tasks?

Thanks
ID: 1123056 · Report as offensive
Profile Raistmer
Volunteer developer
Volunteer tester
Avatar

Send message
Joined: 16 Jun 01
Posts: 6325
Credit: 106,370,077
RAC: 121
Russia
Message 1123072 - Posted: 30 Jun 2011, 19:28:58 UTC

I see zero errors on your host with HD5xxx GPU.
Give link to errored WU.
ID: 1123072 · Report as offensive
Iona
Avatar

Send message
Joined: 12 Jul 07
Posts: 790
Credit: 22,438,118
RAC: 0
United Kingdom
Message 1123075 - Posted: 30 Jun 2011, 19:45:57 UTC - in response to Message 1123072.  

I think he means this PC and not the one with the HD5700.



Don't take life too seriously, as you'll never come out of it alive!
ID: 1123075 · Report as offensive
Claggy
Volunteer tester

Send message
Joined: 5 Jul 99
Posts: 4654
Credit: 47,537,079
RAC: 4
United Kingdom
Message 1123081 - Posted: 30 Jun 2011, 20:02:36 UTC - in response to Message 1123055.  
Last modified: 30 Jun 2011, 20:23:43 UTC

Did you read the Options when you installed?, Your HD 2300/2400/3200 doesn't have OpenCL support, only ATI HD4*** series and above have it, so you can't run OpenCL apps on it, only the Hybrid Astropulse app.
(Even if you had an OpenCL capable GPU, Cat 10.5 is too old, Cat 10.7b and SDK is the oldest supported)

Number of period iterations for PulseFind setted to:5
Number of app instances per device setted to:1
Running on device number: 0
Priority of worker thread raised successfully
Priority of process adjusted successfully, below normal priority class used
OpenCL platform detected: Advanced Micro Devices, Inc.
ERROR: clGetDeviceIDs: -1
ERROR: No devices found.


Rerun the Installer and only select apps that your GPU is capable or running.

Claggy
ID: 1123081 · Report as offensive
Claggy
Volunteer tester

Send message
Joined: 5 Jul 99
Posts: 4654
Credit: 47,537,079
RAC: 4
United Kingdom
Message 1123084 - Posted: 30 Jun 2011, 20:08:20 UTC - in response to Message 1123056.  
Last modified: 30 Jun 2011, 20:24:53 UTC

part II of question - I was able to suspend the use of the gpu in local preferences but did not see how to stop getting new tasks for gpu. I see where I can stop getting tasks for the NVIDIA GPU but not the ATI. anyone know how to stop getting tasks?

Thanks

Once you've put an ATI app in an app_info you can't stop Boinc asking for ATI work from Seti, there are no Stock ATI apps, so that Preference isn't enabled and visable,
you can disable the fetching of seti_enhanced and astropulse work, but that will stop your fetching of work for the CPU too,

Claggy
ID: 1123084 · Report as offensive
Profile AlienDancer
Volunteer tester
Avatar

Send message
Joined: 8 Sep 99
Posts: 68
Credit: 12,473,416
RAC: 0
Message 1123179 - Posted: 1 Jul 2011, 0:55:04 UTC

I see where Bionic sees my card as CAL ATI Radeon HD 2300/2400/3200 (RV610) (320MB) but the AMD control center reports it as shown below. That's why I set it up as a HD4***. Seems Bionic must be correct. Anyway I've reinstalled and will see what happens. Thanks for your help.

Primary Adapter
Graphics Card Manufacturer Powered by AMD
Graphics Chipset ATI Mobility Radeon HD 4250
Device ID 9712
Vendor 1002

ID: 1123179 · Report as offensive
Profile skildude
Avatar

Send message
Joined: 4 Oct 00
Posts: 9541
Credit: 50,759,529
RAC: 60
Yemen
Message 1123224 - Posted: 1 Jul 2011, 3:07:58 UTC - in response to Message 1123179.  

That's an onboard graphics card and is probably only going be able to do the Hybrid work as previously noted.


In a rich man's house there is no place to spit but his face.
Diogenes Of Sinope
ID: 1123224 · Report as offensive
Profile AlienDancer
Volunteer tester
Avatar

Send message
Joined: 8 Sep 99
Posts: 68
Credit: 12,473,416
RAC: 0
Message 1123228 - Posted: 1 Jul 2011, 3:11:04 UTC

So I have thought about this some more and something doesn't seem right. Both the AMD control center and Windows device manager reports my card as a HD4250, yet Bionic thinks it is one of CAL ATI Radeon HD 2300/2400/3200. Both can't be right. I have reinstalled and selected options for the HD 2300/2400/3200 so I'll see if that corrects the problem. What I'm not clear on is why the difference in how the cards are identified?
ID: 1123228 · Report as offensive
OzzFan Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 9 Apr 02
Posts: 15691
Credit: 84,761,841
RAC: 28
United States
Message 1123234 - Posted: 1 Jul 2011, 3:22:01 UTC - in response to Message 1123228.  

BOINC can only interpret what the developers code into the program. Windows and the ATi control panel are going to be more accurate than BOINC (pedantic: notice it's not spelled bionic! :)
ID: 1123234 · Report as offensive
Profile skildude
Avatar

Send message
Joined: 4 Oct 00
Posts: 9541
Credit: 50,759,529
RAC: 60
Yemen
Message 1123235 - Posted: 1 Jul 2011, 3:22:10 UTC - in response to Message 1123228.  

download GPUz and that should tell you difinitively


In a rich man's house there is no place to spit but his face.
Diogenes Of Sinope
ID: 1123235 · Report as offensive
Claggy
Volunteer tester

Send message
Joined: 5 Jul 99
Posts: 4654
Credit: 47,537,079
RAC: 4
United Kingdom
Message 1123264 - Posted: 1 Jul 2011, 5:08:45 UTC - in response to Message 1123228.  
Last modified: 1 Jul 2011, 5:09:10 UTC

So I have thought about this some more and something doesn't seem right. Both the AMD control center and Windows device manager reports my card as a HD4250, yet Bionic thinks it is one of CAL ATI Radeon HD 2300/2400/3200. Both can't be right. I have reinstalled and selected options for the HD 2300/2400/3200 so I'll see if that corrects the problem. What I'm not clear on is why the difference in how the cards are identified?

The definative list of what GPU's are supported is here:

System Requirements & Driver Compatibility


I have a feeling that the HD42** is a rebadged HD3*** GPU,

Claggy
ID: 1123264 · Report as offensive
Profile arkayn
Volunteer tester
Avatar

Send message
Joined: 14 May 99
Posts: 4438
Credit: 55,006,323
RAC: 0
United States
Message 1123277 - Posted: 1 Jul 2011, 5:36:30 UTC

Mobile GPU's are lower end parts just named differently.

We see this all the time at Milkyway when someone with a 48xxM or 58xxM thinks it is the same GPU as the 48xx and 58xx, but it is more likely that it is 46xx and 57xx architecture.

BOINC looks at the [RV] version to determine what you have and that info is coded into BOINC itself.


ID: 1123277 · Report as offensive
halfempty
Avatar

Send message
Joined: 2 Jun 99
Posts: 97
Credit: 35,236,901
RAC: 114
United States
Message 1123281 - Posted: 1 Jul 2011, 5:42:35 UTC - in response to Message 1123264.  
Last modified: 1 Jul 2011, 5:47:49 UTC

... I have a feeling that the HD42** is a rebadged HD3*** GPU,

I think the key is that it is a Mobility HD4200. Even though they use the same branding and model numbers, the Mobility series is not the same engine as a discrete graphics card. Found this article that agrees with your feeling about the embedded 4200's being based on the HD 3400 core.

Edit. Was typing while arkayn was posting. What he said. :-)
ID: 1123281 · Report as offensive
Profile Raistmer
Volunteer developer
Volunteer tester
Avatar

Send message
Joined: 16 Jun 01
Posts: 6325
Credit: 106,370,077
RAC: 121
Russia
Message 1123310 - Posted: 1 Jul 2011, 8:36:46 UTC

It was mentioned over AMD forums few times that not all HD4xxx GPUs share same architecture (just as other generations do). It's marketing trick that only complicates our lives. HD42xx have actually HD3xxx-like architecture.

I had host with HD4200 embedded GPU to test recently and can definitely say no - it doesn't support OpenCL.

Full list of suppored GPUs placed on AMD site and link to that page should be in release notes for app. So, please, read more!
ID: 1123310 · Report as offensive
Iona
Avatar

Send message
Joined: 12 Jul 07
Posts: 790
Credit: 22,438,118
RAC: 0
United Kingdom
Message 1123313 - Posted: 1 Jul 2011, 9:00:10 UTC - in response to Message 1123281.  

As far as I can see, the Mobility HD4250 is apparently RV620 based, which appears to be used in the Radeon HD3400s, including rather confusingly, the Mobility Radeon HD3400s! Why on Earth do they have to make things so difficult? Yep, over to GPU-Z.....



Don't take life too seriously, as you'll never come out of it alive!
ID: 1123313 · Report as offensive
Profile Fred J. Verster
Volunteer tester
Avatar

Send message
Joined: 21 Apr 04
Posts: 3252
Credit: 31,903,643
RAC: 0
Netherlands
Message 1123317 - Posted: 1 Jul 2011, 9:17:48 UTC - in response to Message 1123310.  
Last modified: 1 Jul 2011, 9:29:15 UTC

It was mentioned over AMD forums* few times that not all HD4xxx GPUs share same architecture (just as other generations do). It's marketing trick that only complicates our lives. HD42xx have actually HD3xxx-like architecture*.

I had host with HD4200 embedded GPU to test recently and can definitely say no - it doesn't support OpenCL.

Full list of suppored GPUs placed on AMD site and link to that page should be in release notes for app. So, please, read more!


Hi, you're quite right about that* and I even wonder if it's worth trying to use the GPU, in Sandy Bridge CPUs like the
i7-2600 (and other i5-xxxx/i3-xxxx), CPU/GPUs for OpenCL calculations?

Although this is a total different 'case' and should work, but at the expence of
CPU performance loss(?) and total dissipation (TDP).

Atleast my i7-2600 with 2 5870s, now produces valid results, with ATI HD5000
rev.177 ! Host 5884985.

You have done a great job, Raistmer et all, ;-) and we all should read more
about so called 'new' cards, mobile cards (LapTops/NetBooks), nVIDIA started
this confusing marketing 'trick', like 8800GTX--> 9800GTX(+)--> GTS250 and
now AMD does something 'alike'. Confusing & Confusing !

Using the GPUs, real name, RVxxx(ATI) andG92; G100, etc.
(nVIDIA) would make things easier and more clear, IMO.
ID: 1123317 · Report as offensive
Profile Jord
Volunteer tester
Avatar

Send message
Joined: 9 Jun 99
Posts: 15184
Credit: 4,362,181
RAC: 3
Netherlands
Message 1123329 - Posted: 1 Jul 2011, 10:27:33 UTC

OK, before people then think that BOINC must have wrong code or must be wrong in what it's doing, here is what it is doing.

BOINC will look on your system for part of the videocard driver. In the case of Nvidia, it'll be the nvcude.dll. In the case of ATI, it'll be aticalrt.dll/aticalrt64.dll and amdcalrt.dll/amdcalrt64.dll. Inside these libraries, there is lots of information about the various videocards (GPUs), IGPs and APUs that are available.

In the case of Nvidia, BOINC reads the name of the videocard directly from the library (using cuDeviceGetName).

In the case of ATI, BOINC will search inside these libraries for a specific value set in CAL_TARGET and compares that against a list of known CPUs according to AMD's Stream SDK 2.3 shipped with the AMD Catalyst 10.12 APP. This is how RV610 gets to be seen as what it is:
case CAL_TARGET_610:
            gpu_name="ATI Radeon HD 2300/2400/3200 (RV610)";

If you think this is wrong, then you will have to complain to ATI about that. It's their library from their own videocard driver that BOINC gets the information from.
ID: 1123329 · Report as offensive
Profile AlienDancer
Volunteer tester
Avatar

Send message
Joined: 8 Sep 99
Posts: 68
Credit: 12,473,416
RAC: 0
Message 1123338 - Posted: 1 Jul 2011, 11:29:40 UTC

Thanks for all the info! Seems all is not as it seems and the card is really a lower end HD 2300/2400/3200. So I'll just wait and see if the card can handle the Hybrid Astropulse. Learn something new all the time.

I also have a machine with a HD5700 on which I would like to use the GPU but not until I can control getting tasks for the GPU through preferences as that is my "entertainment" system and don't want it slowed down except during time when I'm away. Any guess as to when that might happen.
ID: 1123338 · Report as offensive
Profile Jord
Volunteer tester
Avatar

Send message
Joined: 9 Jun 99
Posts: 15184
Credit: 4,362,181
RAC: 3
Netherlands
Message 1123339 - Posted: 1 Jul 2011, 11:30:40 UTC - in response to Message 1123331.  

It's a harmless bit of fun and long may it continue :-))

Until you find people confused that they cannot find the "BIONIC" (Data) directory, or any mention of it in the registry (for whatever reason they need to be there).

BOINC, Bionic, BIONC, Bionoic, Bionk, Boink, BONC, BINK, BONIC, BINOC, what's in a name. ;-)
ID: 1123339 · Report as offensive
1 · 2 · Next

Message boards : Number crunching : ATI GPU problem


 
©2024 University of California
 
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.