Message boards :
Number crunching :
Lunatics Windows Installer v0.38 release notes
Message board moderation
Author | Message |
---|---|
Miep Send message Joined: 23 Jul 99 Posts: 2412 Credit: 351,996 RAC: 0 |
Lunatics Installer Dudes and Dudette are pleased to announce the availibility of the v0.38 installer in the Lunatics main download area Please take care you use the right installer (32/64 bit) for your system. We made the effort of writing a README. Available both separately and as part of the install. Should you have any questions or problems - ask! Post in this thread or open a new one. New in this installer: Automatic BOINC client (but not manager!) shutdown and restart. ATI applications: AP r521, MB r177 [AP r453 hybrid (Brook) for older/smaller cards] CUDA MB application: x38g_cuda32 ONLY applications for GPU have been added/changed - if you are currently running optimised apps but do NOT have a GPU (either ATI or NVidia) that can crunch you do NOT need this installer NB We use default values throughout the app_info.xml. If you have previously installed optimised applications and manually edited app_info.xml (e.g. counts for Fermi, cmdline for ATI) you WILL lose those edits on running the installer and have to redo them. Known issues - general The installer is supposed to shut down the BOINC client while leaving the Manager running - noticable from the red 'disconnected' dot in the tray. After finishing the BOINC client should restart and the red dot vanish when the Manager reconnects. This make take a few minutes. On some systems however this fails to work. Please ensure BOINC has restarted. Advanced users only: If you know you are going to edit app_info.xml, it may be easier to shutdown and restart BOINC manually, so you can get the changes into app_info before the restart. Known issues - ATI apps Minimum required driver: Something that is OpenCL capable. You can check with GPU-Z (see readme). For your convenience a list: Catalyst 10.7b with SDK Catalyst 10.10 APP without SDK Catalyst 11.3 or higher - if you need to upgrade this should be the easiest, safest option. 11.2 can also be used. NB using this installer will give you arbitrary default cmdline parameter entries. If you are already running ATI applications: Make a note of what numbers you are using to be able to restore to those values PRIOR to running the installer. This also applies to setting the [count] variable according to your -instances per device variable for multithreading. The ATI MB application will not work on ATI cards with workgroup size 128 (e.g. HD43xx). To check this run CLinfo, downloadable (at present) from http://boinc.berkeley.edu/dl/clinfo.zip The Hybrid AP application uses about 80% of a CPU core and does only about 20% of the calculations on the GPU. Parameters have been choosen to reflect this usage. However present BOINC can not reserve '0.8' of a CPU core and therefore reserves none. This means your CPUs will be over committed and runtimes and DCF will suffer. You do increase the overall output though. Known issues - CUDA app Requires minimum CUDA 3.2 capable NVidia driver: 263.06 (260.99 on notebooks) BOINC API has been fixed, newer drivers (270+) can be used. VRAM requirement has increased from x32f. It should be able to JUST run on a 256 MiB card, provided you free up as much VRAM as possible. CPU fallback is working again. IF you experience extremely long runtimes or -177 errors, check the stderr for a line reading: setiathome_CUDA: CUDA runtime ERROR in device memory allocation (Step 1 of 3). Falling back to HOST CPU processing... or something similar and correct your memory issues if found. Newer (270+) drivers use more kernel RAM - you may run into memory problems, especially on 256 MiB cards or when multithreading on Fermis or with a lot of cards in one host. NB with a 256 MiB card you may be forced to stay on 266 drivers until a newer app with reduced memory requirements is available. Fermi card owners need to decrease the [count] entries in app_info.xml again, should they wish to multithread: Find all instances of [count]1[/count] in your app_info.xml and decrease to 0.5/0.3 to run 2/3 tasks at the same time. Task validation is geared toward V7 - you may experience more inconclusives in the transition period. General Notes: With Windows Vista and Windows 7, do not install BOINC in 'Service' or 'Protected Application Execution' mode for GPU crunching, and do not connect to a Vista/7 computer with Windows Remote Desktop while it is running a GPU application. Switching users can also cause the GPU app to fail [BOINC versions before 6.12.28] Tuning cmd line parameters: For AP: If you get lags or worse driver restarts, decrease unroll. If you run stable you can try to increase it. ffa_block should be a multiple of ffa_block_fetch. Start low e.g. -ffa_block 4096 -ffa_block_fetch 2048 and try increasing if it runs fine. Sticking to the power of 2 line at first can help. The will be a system specific best combination - too low slows you down, too high slows you down as well. Remember AP runtimes depend on blanking % so only compare runtimes on similar blanking %. For MB: other way round - if you experience lag or driver restarts increase -period_iteration_num Thanks go to Jason and Raistmer for the applications and to Richard for getting the BOINC stop/restart to work and actually building the installer. You may shout at me, if the app_info is wrong. I would also like to take this opportunity to thank our active alpha testers (in no particular order and apologies to anybody I've forgotten) Claggy, Ghost, arkayn, Mike, SciManSteve and Vyper, perryjay for reliable beta testing and advertisement as well as Fredericx51 for valuable insight into what it looks like when something went wrong. Carola ------- I'm multilingual - I can misunderstand people in several languages! |
Helli_retiered Send message Joined: 15 Dec 99 Posts: 707 Credit: 108,785,585 RAC: 0 |
Many Information... May i ask a question, neverless? Is there a reason why i should update my CUDA App x32f to x38g_cuda32? Helli |
Miep Send message Joined: 23 Jul 99 Posts: 2412 Credit: 351,996 RAC: 0 |
May i ask a question, neverless? Is there a reason why i should update my CUDA App x32f to x38g_cuda32? This thread is specifically for asking questions and reporting problems ;) a) very likely faster - depends on your system of course. I've got some 10-15%. b) CUDA 4 compliant BOINC API exit code - won't clash with 270+ NVidia drivers. c) It's better with VLAR (not that you should be seeing any on the GPU atm) d) working CPU fallback - mainly something for small slow cards e) additional benefits I'm not aware of, that Jason might point out. Carola ------- I'm multilingual - I can misunderstand people in several languages! |
Claggy Send message Joined: 5 Jul 99 Posts: 4654 Credit: 47,537,079 RAC: 4 |
Many Information... It's quick a bit faster, ;-) Claggy |
Miep Send message Joined: 23 Jul 99 Posts: 2412 Credit: 351,996 RAC: 0 |
Many Information... And that is, as Jason keeps repeating, with only a negligible amount of actual optimisation put into the code. Carola ------- I'm multilingual - I can misunderstand people in several languages! |
Claggy Send message Joined: 5 Jul 99 Posts: 4654 Credit: 47,537,079 RAC: 4 |
Is it possible to download AP r521 separately somewhere. The version on Lunatics site is r456. Download the Installer, then extract the apps from the Installer with 7-Zip, Claggy |
Miep Send message Joined: 23 Jul 99 Posts: 2412 Credit: 351,996 RAC: 0 |
Is it possible to download AP r521 separately somewhere. The version on Lunatics site is r456. I was wondering if you could do that... Anyway I've stuck it here Carola ------- I'm multilingual - I can misunderstand people in several languages! |
Richard Haselgrove Send message Joined: 4 Jul 99 Posts: 14679 Credit: 200,643,578 RAC: 874 |
Is it possible to download AP r521 separately somewhere. The version on Lunatics site is r456. You will find the basic framework for the app_info segment in the file APATI.aistub, also available for extraction from the installer. Remember that you will also need the matching Astropulse_Kernels_r521.cl file, and to update that <file_ref> alongside the main program update. Edit - you don't, strictly speaking, need the .pdb file that Carola has put in the stand-alone download, although that will be helpful in passing diagnostic information back to Raistmer in the unlikely event that the application crashes. |
Helli_retiered Send message Joined: 15 Dec 99 Posts: 707 Credit: 108,785,585 RAC: 0 |
Thanks Claggy and Miep for your fast reply. That means for me it's not really necessary to switch now. Actually i have no problems with my both Cuda Rigs, neither with downclocking or anything else. Because my Graphic Cards are only Co-Processor Cards here ;-) , there is no need for me to upgrade my Graphic Card Driver. Helli |
HAL9000 Send message Joined: 11 Sep 99 Posts: 6534 Credit: 196,805,888 RAC: 57 |
I had a small issue of BOINC nuking all the CUDA tasks after running the v0.38 installer. However, I think it was probably my own doing and since I backed everything up I didn't actually loose anything. With the installer I notice the plan class for for the versions are like this which is probably correct. <version_num>610</version_num> <plan_class>cuda_fermi</plan_class> <version_num>609</version_num> <plan_class>cuda23</plan_class> <version_num>608</version_num> <plan_class>cuda</plan_class> As I had manually added 609 and 610 sections to my old file it looked like this. <version_num>610</version_num> <plan_class>cuda</plan_class> <version_num>609</version_num> <plan_class>cuda</plan_class> <version_num>608</version_num> <plan_class>cuda</plan_class> Once I saw the difference I changed them all to <plan_class>cuda</plan_class> as I had previously. Should I let the CUDA tasks run dry and then correct the <plan_class> information, or does it not really matter that much? SETI@home classic workunits: 93,865 CPU time: 863,447 hours Join the [url=http://tinyurl.com/8y46zvu]BP6/VP6 User Group[ |
Richard Haselgrove Send message Joined: 4 Jul 99 Posts: 14679 Credit: 200,643,578 RAC: 874 |
I had a small issue of BOINC nuking all the CUDA tasks after running the v0.38 installer. However, I think it was probably my own doing and since I backed everything up I didn't actually loose anything. It doesn't really matter. The plan_class elements in the installer have been chosen to match the versions that would be issued with stock (non-optimised) applications. We would always advise people to follow that convention when manually adding elements to app_info.xml In your situation, here's what I'd do: Stick with the backup and your current cache of workunits. Look at the version numbers shown in BOINC Manager for the tasks you're actually running/waiting to run. I expect they will all show 6.10 by now. Double-up your existing app_version sections, so they read <version_num>610</version_num> <plan_class>cuda_fermi</plan_class> <version_num>610</version_num> <plan_class>cuda</plan_class> (in that order) Do the same for 609 and 608 if you have any tasks for them, but I doubt if it'll be necessary. Wait a few days. As tasks labelled "6.10 (cuda)" are processed and reported, they should be replaced by tasks labelled "6.10 (cuda_fermi)". Once that process is complete, and all tasks reported, it should be safe to re-run the installer. That way, you avoid having to make any manual alterations to client_state.xml, which is always a risky process. |
Richard Haselgrove Send message Joined: 4 Jul 99 Posts: 14679 Credit: 200,643,578 RAC: 874 |
Thank you Richard, and all other specialist, for being so helpful and so quick in answering questions, and giving support. Yup, Carola has had to go out on other duties, so I've taken the helm for now. We'll try and ensure that one or other of us is available for tech support in the early stages of the release, though we greatly appreciate the input from others too - it will be nice to get some sleep in due course :-) |
Richard Haselgrove Send message Joined: 4 Jul 99 Posts: 14679 Credit: 200,643,578 RAC: 874 |
Houston i have a problem. Yes, there is a known but temporary issue to do with inconclusive validations. As Jason_gee (who wrote the x38g CUDA application inclided in the installer) put it: About inconclusives with x38 series: Certain kinds of inconclusives against particular kinds of wingman results are expected: We're pretty certain that the vast majority of x38g results will validate in the end, and in the longer term (when the improved accuracy is transferred to the stock and other optimised applications, the first-time validation rate will go back to, and even above, what it previously was. The x38g application is designed to work better with the newer drivers, and to eliminate the down-clocking problem that some users have reported. The 275-series drivers should show a speed improvement as well. You are right to keep an eye on your temperatures and validation rates, especially when overclocking, with the new apps - the extra processing speed will put a greater strain on them than before. But provided the tasks validate in the end - as they should do, unless you draw a quorum partner with problems of their own - you should have no additional problems. |
Richard Haselgrove Send message Joined: 4 Jul 99 Posts: 14679 Credit: 200,643,578 RAC: 874 |
And more questions: To get AP tasks for ATI, is it a must to enable "Send work from other apps" on web preferences page, even if Astropulse v5.05 already is enabled? AP ATI and MB ATI require different applications and different app_info sections. Whether you are installing the apps by hand (as you are doing), or running the installer itself, you have the choice of selecting none, either or both of these applications. If you don't install the MB ATI app, BOINC won't ask for that kind of work. As to AP ATI - that depends on the availability of AstroPulse work in general, and as testers have found and reported here, that can be in short supply some of the time. |
Mike Send message Joined: 17 Feb 01 Posts: 34365 Credit: 79,922,639 RAC: 80 |
And more questions: To get AP tasks for ATI, is it a must to enable "Send work from other apps" on web preferences page, even if Astropulse v5.05 already is enabled? No its not needed. I leave it unchecked myself. Note its hard to get APs atm. With each crime and every kindness we birth our future. |
Tazz Send message Joined: 5 Oct 99 Posts: 137 Credit: 34,342,390 RAC: 0 |
Great job guys. So far the first few tasks have been approx. 100 seconds faster on VHARs with driver 267.59; I'll let things run for a few days then maybe update the drivers. http://setiathome.berkeley.edu/result.php?resultid=1949057328 http://setiathome.berkeley.edu/result.php?resultid=1949065826 </Tazz> |
Richard Haselgrove Send message Joined: 4 Jul 99 Posts: 14679 Credit: 200,643,578 RAC: 874 |
Note its hard to get APs atm. 8,567 ready to send ;-) They should start reaching the head of the queue soon. |
skildude Send message Joined: 4 Oct 00 Posts: 9541 Credit: 50,759,529 RAC: 60 |
YOu'll get them eventually. I think the shorty storm has hindered the production of AP WU's In a rich man's house there is no place to spit but his face. Diogenes Of Sinope |
Richard Haselgrove Send message Joined: 4 Jul 99 Posts: 14679 Credit: 200,643,578 RAC: 874 |
Then again, when Boinc asks for GPU tasks, it doesn't tell what kind of GPU tasks it wants, if it is as in my case since I have installed both ATI GPU apps, ATI MB it asks for, or ATI AP. BOINC will actually just ask for "work for ATI GPU" - it isn't fussy. It's up to the project to work out which type of work is available, MB or AP, and assign it to the GPU in response to the request. |
skildude Send message Joined: 4 Oct 00 Posts: 9541 Credit: 50,759,529 RAC: 60 |
You sound like a nervous father to be In a rich man's house there is no place to spit but his face. Diogenes Of Sinope |
©2024 University of California
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.