Going to be a looooooooong weekend.

---

Official Abuser of Boinc Buttons...
And no good credit hound!

I probably need to be more clear.. I need MP GPU work.

FEED MY GPU'S, or i will starve to death!

---

Same here.

Dave

---

FEED ME, or i will starve to death!

ROFL....

---

Official Abuser of Boinc Buttons...
And no good credit hound!

FEED ME, or i will starve to death!

---

23mr10ab now in the splitters. Everybody, grab grab grab :-)

Sten-Arne

AP work units only :( It wont give me any :(

I managed to get one MB out of that file. Getting AP's though, that's harder than winning the lottery.

Sten-Arne

channels ended in error: 0 8

Plus it's erroring out the exact same as it did yesterday on the AP side of things, seems they tried a fix for the issue that Matt posted about in the Technical News section, but it musn't have worked.

---

- Jarryd

Already got quite a lot, mostly CUDA/(CAL), 100 to 4, ~0.4AR to ~0.005.
Also run a lot of "Back Up" projects.
Never out of work, unless I want to :)

---

23mr10ab now in the splitters. Everybody, grab grab grab :-)

Sten-Arne

AP work units only :( It wont give me any :(

I managed to get one MB out of that file. Getting AP's though, that's harder than winning the lottery.

Sten-Arne

23mr10ab now in the splitters. Everybody, grab grab grab :-)

Sten-Arne

AP work units only :( It wont give me any :(

---

- Jarryd

23mr10ab now in the splitters. Everybody, grab grab grab :-)

Sten-Arne

Never get power problems in the U.K.
13amp sockets 240v.RCD's
If anything goes wrong power just goes off.

Dave

120 don't hurt. 240 probably kills, bad burns.

---

Never get power problems in the U.K.
13amp sockets 240v.RCD's
If anything goes wrong power just goes off.

Dave

---

I've wired up two 20 amp circuits to help power my farm. Why do UPS mfg assume your load your attaching has 60% powerfactor.

Good question. I guess what really matters is how long do you want the computers to run on battery before shutting down.

I tried to write a custom BOINC client that is UPS aware (apcupsd on linux), but I couldn't get it to suspend work when the UPS switched to battery power. I thought that would be a nice feature, especially for farms or server closets.

delta 80... got the third card ready to drop in. will have to unplug the computer from the UPS as it will pull to much power APC 1500VA unit. right now it the power flickers for more then 10 seconds it starts to shut down:(

Be careful approaching 1800VA... that's the typical USA home circuit breaker size for 1 room.

I've wired up two 20 amp circuits to help power my farm. Why do UPS mfg asume your load your ataching has 60% powerfactor.

---

Yes, untick both boxes on the settings page then you can move the slider on the main page to whatever % you want on the GPU. Even if you move the slider to 100% it will not move VLARs back to the GPU so no worries there. Once you've moved however many you want to the GPU, go back and re-tick that Only VLAR and VHAR box. With that box checked the rescheduler will only move VLARs to the CPU and not bother anything else. The slider grays out.

Thank you! I was wondering how to do that myself. If I have to drain my cache, that will definitly make things go much faster.

Steve

Especially with those 480's ;) That'd be a fun way to drain it.

Yes, untick both boxes on the settings page then you can move the slider on the main page to whatever % you want on the GPU. Even if you move the slider to 100% it will not move VLARs back to the GPU so no worries there. Once you've moved however many you want to the GPU, go back and re-tick that Only VLAR and VHAR box. With that box checked the rescheduler will only move VLARs to the CPU and not bother anything else. The slider grays out.

Thank you! I was wondering how to do that myself. If I have to drain my cache, that will definitly make things go much faster.

Steve

---

Warning, addicted to SETI crunching!
Crunching as a member of GPU Users Group.
GPUUG Website

Yes, untick both boxes on the settings page then you can move the slider on the main page to whatever % you want on the GPU. Even if you move the slider to 100% it will not move VLARs back to the GPU so no worries there. Once you've moved however many you want to the GPU, go back and re-tick that Only VLAR and VHAR box. With that box checked the rescheduler will only move VLARs to the CPU and not bother anything else. The slider grays out.

Thank you for that. :) Works great, now that i actually know how to use the thing properly. :P

- Jarryd

Yes, untick both boxes on the settings page then you can move the slider on the main page to whatever % you want on the GPU. Even if you move the slider to 100% it will not move VLARs back to the GPU so no worries there. Once you've moved however many you want to the GPU, go back and re-tick that Only VLAR and VHAR box. With that box checked the rescheduler will only move VLARs to the CPU and not bother anything else. The slider grays out.

---

PROUD MEMBER OF Team Starfire World BOINC

Hellsheep,
You do know you can move non-VLAR tasks from the CPU to the GPU using the rescheduler don't you?

I knew about it, i keep trying but it never moves any? Could you please provide some assistance on how to run it properly? When i first started it, it moved 19 WU's to the GPU instead of CPU and moves a few GPU VLARs to the CPU. Do i untick "Only VLAR and VLAH to the CPU" and set the X amount for less than GPU and CPU?1

Also, what are safe levels of numbers to have? Should i just leave the default numbers to start with and play around if i have troubles?

Hellsheep,
You do know you can move non-VLAR tasks from the CPU to the GPU using the rescheduler don't you?

---

PROUD MEMBER OF Team Starfire World BOINC