Could BOINC app be written for Iphones?

Message boards : Number crunching : Could BOINC app be written for Iphones?
Message board moderation

To post messages, you must log in.

1 · 2 · Next

AuthorMessage
Profile Pilot
Avatar

Send message
Joined: 18 May 99
Posts: 534
Credit: 5,475,482
RAC: 0
Message 936792 - Posted: 30 Sep 2009, 5:48:17 UTC

I Phones and Crackberries etc. What a hoot:)
It might even get the Macophiles to come back and could be a whole new category of contributors.
When we finally figure it all out, all the rules will change and we can start all over again.
ID: 936792 · Report as offensive
Profile arkayn
Volunteer tester
Avatar

Send message
Joined: 14 May 99
Posts: 4438
Credit: 55,006,323
RAC: 0
United States
Message 936796 - Posted: 30 Sep 2009, 6:16:31 UTC - in response to Message 936792.  


It might even get the Macophiles to come back and could be a whole new category of contributors.


I never left, but we have not completed the development of the ATI app yet to push me up so most of my crunching is going to Milkyway.

ID: 936796 · Report as offensive
Profile Fred J. Verster
Volunteer tester
Avatar

Send message
Joined: 21 Apr 04
Posts: 3252
Credit: 31,903,643
RAC: 0
Netherlands
Message 936839 - Posted: 30 Sep 2009, 10:52:25 UTC - in response to Message 936796.  
Last modified: 30 Sep 2009, 11:23:57 UTC

Hi, or settopboxes, digital Radio & TV receiver/recorders, handheld or notebooks, electronic bookreader, dig. camera, etc.

Maybe the latter ;^)
ID: 936839 · Report as offensive
CryptokiD
Avatar

Send message
Joined: 2 Dec 00
Posts: 150
Credit: 3,216,632
RAC: 0
United States
Message 936850 - Posted: 30 Sep 2009, 12:48:10 UTC - in response to Message 936839.  

i have an etch-a-sketch that needs someone to port an app over to it. anyone up to the challenge?
ID: 936850 · Report as offensive
QSilver

Send message
Joined: 26 May 99
Posts: 232
Credit: 6,452,764
RAC: 0
United States
Message 936872 - Posted: 30 Sep 2009, 14:00:33 UTC - in response to Message 936792.  

I Phones and Crackberries etc. What a hoot:)


Maybe. But why bother?
ID: 936872 · Report as offensive
Profile SoNic

Send message
Joined: 24 Dec 00
Posts: 140
Credit: 2,963,627
RAC: 0
Romania
Message 936874 - Posted: 30 Sep 2009, 14:08:00 UTC

Port on iPod? You need a real multitasking SO first :)
ID: 936874 · Report as offensive
Profile Gecko
Volunteer tester
Avatar

Send message
Joined: 17 Nov 99
Posts: 454
Credit: 6,946,910
RAC: 47
United States
Message 936903 - Posted: 30 Sep 2009, 15:14:04 UTC

Short answer. "sure" it could be written.

However, then, someone would have to write a project application (or adjacent project aka iSeti ) for it as well ; >) that would process "shortened" work.

If you did run a project you'd have 3 main issues.

1) Suck a battery dry w/in only a few hours (100% load).
2) Drastically reduced battery life span w/ much higher rate of charge/discharge cycles.
3) Battery heat?

Lastly...the most important....

Performance would be SOOO painfully slow, (read: wayyy slower than even Intel Atom), that besides the fact that it would be totally undesirable to do it, likely not to meet most project deadlines for return of work. The only way for practical use would be shortened work units that would be specific to iPhone/Touch.

There's validity to the methodology of this. Up-teen millions of potential hosts means that even if a project tapped only a small fraction, running shortened work, could still be a substantial contribution to the project.

Today, the barriers and practicality are marginal, but in 12-24 short months, handhelds are likely to be substantially more powerful & better capable of necessary project performance.
Battery life however, will still be the #1 problem and would relegate most crunching while charging in a dock overnite.

ID: 936903 · Report as offensive
1mp0£173
Volunteer tester

Send message
Joined: 3 Apr 99
Posts: 8423
Credit: 356,897
RAC: 0
United States
Message 936923 - Posted: 30 Sep 2009, 16:36:45 UTC - in response to Message 936872.  

I Phones and Crackberries etc. What a hoot:)


Maybe. But why bother?

Because there are so very many of them.
ID: 936923 · Report as offensive
Profile Gary Charpentier Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 25 Dec 00
Posts: 30608
Credit: 53,134,872
RAC: 32
United States
Message 936934 - Posted: 30 Sep 2009, 17:28:42 UTC - in response to Message 936792.  

I Phones and Crackberries etc. What a hoot:)
It might even get the Macophiles to come back and could be a whole new category of contributors.

For the iPhone the answer is a big fat no. The iPhone OS will not allow any background tasks. If you did it foreground, when the phone rings, BOINC would stop. When the call is over the user would have to restart the app manually.

Then there is the battery issue. Dead real quick. I suppose crunch only when on the charger is a work around.

Finally there is the speed issue. The iPhone is a slow CPU compared to a laptop.

Yes it is a good thought, but we are a decade of Moore's law away from it being practical.


ID: 936934 · Report as offensive
Tom Philippart

Send message
Joined: 29 May 06
Posts: 23
Credit: 949,840
RAC: 0
Luxembourg
Message 936952 - Posted: 30 Sep 2009, 19:03:37 UTC

ati support should clearly be a priority
ID: 936952 · Report as offensive
Profile HAL9000
Volunteer tester
Avatar

Send message
Joined: 11 Sep 99
Posts: 6534
Credit: 196,805,888
RAC: 57
United States
Message 936956 - Posted: 30 Sep 2009, 19:24:08 UTC - in response to Message 936934.  

I Phones and Crackberries etc. What a hoot:)
It might even get the Macophiles to come back and could be a whole new category of contributors.

For the iPhone the answer is a big fat no. The iPhone OS will not allow any background tasks. If you did it foreground, when the phone rings, BOINC would stop. When the call is over the user would have to restart the app manually.

Then there is the battery issue. Dead real quick. I suppose crunch only when on the charger is a work around.

Finally there is the speed issue. The iPhone is a slow CPU compared to a laptop.

Yes it is a good thought, but we are a decade of Moore's law away from it being practical.



Single device speed isn't a problem. That's the whole idea of distributed computing. The iphone uses the ARMv6KZ processor, which is also used for the nvidia goforce 6100. Not the most powerful chip, but it could do something. 50,000 cell phones would make a rather nice computing system I'd think.

The big problem with using cell phones would be the power and heat. Most are not ment for running full tilt 24/7. I had some little farming game on my previous phone. I would let run overnight while it was plugged in. The phone died after about a year. Which could have had nothing to do with running the application so much, but I suspect it.

SETI@home classic workunits: 93,865 CPU time: 863,447 hours
Join the [url=http://tinyurl.com/8y46zvu]BP6/VP6 User Group[
ID: 936956 · Report as offensive
Cygnus X-1
Volunteer tester

Send message
Joined: 15 Feb 04
Posts: 75
Credit: 3,732,505
RAC: 175
Canada
Message 936959 - Posted: 30 Sep 2009, 19:34:05 UTC
Last modified: 30 Sep 2009, 19:36:28 UTC

1) Suck a battery dry w/in only a few hours (100% load).


The same issue exists on laptops and I don't see this as an obstacle since you can set Boinc to not run when on battery power. Just as with a laptop a phone app would be meant to run while plugged to a charger.

I'd like to get a Nokia N900 at some point and when/if I do I'll install the ARM/Linux ports of Boinc and Seti.
ID: 936959 · Report as offensive
1mp0£173
Volunteer tester

Send message
Joined: 3 Apr 99
Posts: 8423
Credit: 356,897
RAC: 0
United States
Message 937084 - Posted: 1 Oct 2009, 6:49:09 UTC - in response to Message 936952.  

ati support should clearly be a priority

I doubt that SETI@Home has heavy resources to devote to either platform, so the one that gets done first will likely be the one where a volunteer steps forward.
ID: 937084 · Report as offensive
Profile HAL9000
Volunteer tester
Avatar

Send message
Joined: 11 Sep 99
Posts: 6534
Credit: 196,805,888
RAC: 57
United States
Message 937203 - Posted: 1 Oct 2009, 20:14:44 UTC - in response to Message 937084.  

ati support should clearly be a priority

I doubt that SETI@Home has heavy resources to devote to either platform, so the one that gets done first will likely be the one where a volunteer steps forward.


I volunteer to nod aprovingly at any project that allows more processing power to be harvested.
SETI@home classic workunits: 93,865 CPU time: 863,447 hours
Join the [url=http://tinyurl.com/8y46zvu]BP6/VP6 User Group[
ID: 937203 · Report as offensive
Profile skildude
Avatar

Send message
Joined: 4 Oct 00
Posts: 9541
Credit: 50,759,529
RAC: 60
Yemen
Message 937205 - Posted: 1 Oct 2009, 20:26:31 UTC - in response to Message 937203.  

unfortunately the chips in cellphones, as mentioned before are woefully inadequite for Seti since the TAT is about 1 month even on a short WU. I'd assume using a phone would be like using anything prior to the 200 MHZ processor level. IIRC the 200MHZ processor was the first to require a fan to keep the chip cool.


In a rich man's house there is no place to spit but his face.
Diogenes Of Sinope
ID: 937205 · Report as offensive
Profile 52 Aces
Avatar

Send message
Joined: 7 Jan 02
Posts: 497
Credit: 14,261,068
RAC: 67
United States
Message 937223 - Posted: 1 Oct 2009, 21:44:03 UTC - in response to Message 937205.  

Applets tend not to be frameworks, rather they are.. um, stand alone applets. Downloading additional code is a no-no (one of many dictated by Apple). And presently, only one App can run (of course surrendering control as necessary for phone, sms, email, etc).

An individual project (or Apple themselves for PR) could create a template iCharity Applet that consumes custom "conveniently sized" WU's (ie: can complete in 2 hours w/option to be continuous -- yes, less work per device, but 75 million iPhone/iTouch touting tree huggers who love trying out new apps in the top 25 would more than make up the difference). The CAUSE must resonate with the Apple masses.

EX: Appstore:
    Help Cure Aids (part of iTunes iCharity)
    Help Map Climate Change (part of iTunes iCharity)
    Help End Starvation With New Crops (part of iTunes iCharity)


S@H is probably a bad fit for such an approach mostly because the time overlaps required makes small WU's impractical, although the 4 individual tests could probably be splittered out (with lost synergy) and angle ranges carefully pre-selected. But as someone else pointed out, this is a ton of dev work ($$$)(then there is Zune and 75 other rising platforms in the ever fractured and splintered mobile device market) that just wouldn't advance our particular project's goals aside from short lived PR.

ID: 937223 · Report as offensive
John McLeod VII
Volunteer developer
Volunteer tester
Avatar

Send message
Joined: 15 Jul 99
Posts: 24806
Credit: 790,712
RAC: 0
United States
Message 937250 - Posted: 2 Oct 2009, 0:15:48 UTC

Even a relatively old computer is several orders of magnitude faster than an iPhone for floating point calculations. The iPhones have no FPU which has been standard on laptops and desktops since the Pentium first came out. I once tested the difference of an 8086 with no FPU and an 8086 with an FPU on a strictly floating point calculation. Without the FPU I calculated that based on progress it would take about 6 months to complete (never completed as I was not that patient). With the FPU it took about an hour. Mind this was with what was otherwise exactly the same hardware. The iPhone clock rate is lower than that of a modern computer. All in all, I bet that the iPhone will take about 100,000 times as long to complete a Floating Point Intensive task as a desktop.

I believe that someone actually ported SETI to a phone. It was discovered that no task from any project that they ported would come anywhere close to making the deadline.

The only place that an iPhone might be able to make a good showing was some calculation that was all integer based (Prime Grid perhaps) or network intensive rather than CPU intensive.

All in all, given the vastly reduced speed, is it really worth the effort to port a floating point intensive project to any hand held device.


BOINC WIKI
ID: 937250 · Report as offensive
Jonathan

Send message
Joined: 14 Nov 08
Posts: 1
Credit: 15,205
RAC: 0
United States
Message 940259 - Posted: 16 Oct 2009, 1:16:21 UTC - in response to Message 936792.  

You might have difficulty getting such an app onto the iPhone App store, however Android and other phones are not as restrictive.

I've thought of this a lot, there is a LOT of untapped processor power. The phone might only process while plugged in. I want it on Windows CE/PPC/Mobile too, I have an old 400MHz ARM Windows phone that usually justs sits "charging" I only take it with me for ereading or watching movies so it could be processing the rest of the time... it would help heat my room too :-) (I don't need to turn on the heat, turn on BOINC and my laptop puts out enough heat to keep it above 55 in the winter.

Another device... routers. My router has almost as much CPU as my phone, and its only being used when I'm on the net. Its running linux, so the CPU must be pretty standard.
ID: 940259 · Report as offensive
Cygnus X-1
Volunteer tester

Send message
Joined: 15 Feb 04
Posts: 75
Credit: 3,732,505
RAC: 175
Canada
Message 940279 - Posted: 16 Oct 2009, 3:30:13 UTC

I recently preordered a Pandora, I'm curious to see how it will perform with Boinc/Seti.
ID: 940279 · Report as offensive
Profile Raistmer
Volunteer developer
Volunteer tester
Avatar

Send message
Joined: 16 Jun 01
Posts: 6325
Credit: 106,370,077
RAC: 121
Russia
Message 940335 - Posted: 16 Oct 2009, 8:45:41 UTC - in response to Message 937250.  
Last modified: 16 Oct 2009, 8:47:56 UTC

All in all, I bet that the iPhone will take about 100,000 times as long to complete a Floating Point Intensive task as a desktop.

I believe that someone actually ported SETI to a phone. It was discovered that no task from any project that they ported would come anywhere close to making the deadline.


Regarding SETI it could be not so bad if some algorithm change will be done.
We get data for analisys from 2-bit samples.
It should be possible to expand them not to FP single precision but to int32 for example and doing at least most part of pipeline in integer calculations instead of floating point.
Moreover, AP for example demonstrates strong memory-bound behavior and doing mostly additions/comparisons that could be done in integer instead of FP.
That is, maybe it's worth to compare no processor of handheld device but its memory access speed (afraid it will be too low too though).

And regarding ~75M of cell phone users... IMO many if not all of them have "big" PC too. Question is - do we see those ~75M hosts here?... so, only smal fraction of cell phones will participate anyway, even if such port will be done...
ID: 940335 · Report as offensive
1 · 2 · Next

Message boards : Number crunching : Could BOINC app be written for Iphones?


 
©2024 University of California
 
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.