On Bandwidth (Jul 08 2009)

Message boards : Technical News : On Bandwidth (Jul 08 2009)
Message board moderation

To post messages, you must log in.

1 · 2 · 3 · 4 · Next

AuthorMessage
Profile Matt Lebofsky
Volunteer moderator
Project administrator
Project developer
Project scientist
Avatar

Send message
Joined: 1 Mar 99
Posts: 1444
Credit: 957,058
RAC: 0
United States
Message 915800 - Posted: 8 Jul 2009, 19:03:43 UTC

Once again it took the replica all night to recover. I started it up this morning, and it's catching up now. Well, almost. I'll turn the "show tasks/results" feature back on once it really starts catching up.

There's been a lot of discussion lately about our bandwidth woes. I actually talked to Blurf this morning on the phone regarding the (rather generous) push to donate money/hardware towards solving this problem. Let me try to paint a big picture here.

We pay for a gigabit of bandwidth from our private ISP (Hurricane Electric), but can only use 100 Mbits given current campus infrastructure. Most of campus is on gigabit already, but our lab is all the way up the hill - so it's much harder and more expensive to improve the old wiring/routing. The entire rest of the Space Lab uses about 10 Mbits/sec, so there is absolutely zero push by anybody else to spend money/effort on this project. Luckily, there was a spare 100 Mbit cable which is what we are using for the Hurricane Electric link.

While we pay for our bits, they still have to route through campus in order to ultimately hook up with the right backbones. That means we have to adhere to campus's network specs, which in turn means we can only use very specific brands/models of hardware, and can only act once they've fully researched our needs. We opened up a ticket months ago asking to start this research. We got word a couple days ago this research has more or less finally begun. Not much progress, but still non-zero. This may seem impossibly slow, but campus really pretty much always has much bigger fish to fry. Plus our requests usually present them with something new they haven't dealt with before, and therefore they are far more careful.

Ultimately, we should be presented with a couple options from campus which include exact pieces of hardware to be obtained. It's still not clear how much cable has to be upgraded and where, but we know we'll need two new routers, if not also other hardware. When campus gives us this final report, only then can we start figuring out how to obtain the necessary hardware.

As for other options, like going wireless... There actually used to be a building down in the flats that got wireless bandwidth from us. The experience was that it was quite slow and prone to suffering during bad weather, etc. This was a while ago, but still there is enough concern about reliability that nobody seems to want to go down this path.

Of course, another option is relocating our whole project down the hill (where gigabit links are readily available), or at least the server closet. Since the backend is quite complicated with many essential and nested dependencies it's all or nothing - we can't just move one server or functionality elsewhere - we'd have to move everything (this has been explained by me and others in countless other threads over the years). If we do end up moving (always a possibility) then all the above issues are moot.

Another important thing to consider is that we can always reduce are bandwidth demands via other means, which I also explained in another recent threads. Things like removing redundancy (and putting a cap on workunit downloads per day per host), or adding scientific analysis. Or, to be a little extreme, calling SETI@home done, turning off the downloads for good, and moving on to the next thing (something I am actually in favor of doing sooner than later, but the others around here seem to disagree).

I definitely appreciate past and current efforts to help us get beyond the current bandwidth crisis. However, as noted above, there are enough variables involved that I'd hate for you all to start collecting money directed towards a solution to a problem which might just go away. In the meantime, thanks as always for your patience (and crunching time when you actually do get workunits) - we'll keep working with what we got and see if we can't get beyond the storm sooner.

- Matt

-- BOINC/SETI@home network/web/science/development person
-- "Any idiot can have a good idea. What is hard is to do it." - Jeanne-Claude
ID: 915800 · Report as offensive
Nick Fox

Send message
Joined: 5 Jan 04
Posts: 46
Credit: 2,834,922
RAC: 0
United Kingdom
Message 915813 - Posted: 8 Jul 2009, 19:44:24 UTC - in response to Message 915800.  

Thanks for the clarification Matt... and thanks for all your efforts to keep things moving!
ID: 915813 · Report as offensive
PhonAcq

Send message
Joined: 14 Apr 01
Posts: 1656
Credit: 30,658,217
RAC: 1
United States
Message 915817 - Posted: 8 Jul 2009, 19:56:11 UTC - in response to Message 915800.  

Or, to be a little extreme, calling SETI@home done, turning off the downloads for good, and moving on to the next thing (something I am actually in favor of doing sooner than later, but the others around here seem to disagree).
- Matt


I didn't understand this point; could someone elaborate?
ID: 915817 · Report as offensive
Profile Blurf
Volunteer tester

Send message
Joined: 2 Sep 06
Posts: 8964
Credit: 12,678,685
RAC: 0
United States
Message 915818 - Posted: 8 Jul 2009, 19:56:17 UTC

Thank you for the time for our discussion today, Matt. Kind of nice to put a voice to a set of posts.


ID: 915818 · Report as offensive
OzzFan Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 9 Apr 02
Posts: 15691
Credit: 84,761,841
RAC: 28
United States
Message 915835 - Posted: 8 Jul 2009, 20:47:42 UTC

That was very informative and quite clear, Matt. Thanks for giving us the low-down on the progress of things for the bandwidth issue.
ID: 915835 · Report as offensive
Profile ML1
Volunteer moderator
Volunteer tester

Send message
Joined: 25 Nov 01
Posts: 21129
Credit: 7,508,002
RAC: 20
United Kingdom
Message 915841 - Posted: 8 Jul 2009, 20:56:44 UTC - in response to Message 915817.  

I didn't understand this point; could someone elaborate?

American rye humo(u)r...

Or...

Perhaps...

There is a "better" way?


My own view is that we have a wealth of data from Arecibo that is there just waiting to be analysed in all manner of various ways, for the hope of finding ET and along the way for finding many other things unexpected.

A good question with all that is:

How long and how far can we usefully go with this type of technology for attempting to find signs of ET technology?


Note that the mere search in itself is good science in searching for how best to search!

Keep searchin',
Martin

See new freedom: Mageia Linux
Take a look for yourself: Linux Format
The Future is what We all make IT (GPLv3)
ID: 915841 · Report as offensive
Profile ML1
Volunteer moderator
Volunteer tester

Send message
Joined: 25 Nov 01
Posts: 21129
Credit: 7,508,002
RAC: 20
United Kingdom
Message 915844 - Posted: 8 Jul 2009, 21:01:26 UTC - in response to Message 915839.  

... CallingSETI@home done, sounds as if you're saying that in your opinion all the works people are doing now is useless, or at least that you don't need the results any longer, for some reasons. ...

That's all a question of your own interpretation...

SETI is done only when we actually find ET.

We haven't found ET yet.

We also have a very good experiment in how to push various hardware, compute, funding, and human limits in finding ET. Even Matt is part of the social aspects of the experiment :-) !


Keep searchin'!

(Even if all you find is yourself...)

Regards,
Martin

See new freedom: Mageia Linux
Take a look for yourself: Linux Format
The Future is what We all make IT (GPLv3)
ID: 915844 · Report as offensive
Profile ML1
Volunteer moderator
Volunteer tester

Send message
Joined: 25 Nov 01
Posts: 21129
Credit: 7,508,002
RAC: 20
United Kingdom
Message 915846 - Posted: 8 Jul 2009, 21:03:44 UTC
Last modified: 8 Jul 2009, 21:08:27 UTC

... And for those that can't think that one through...

Who knows?!

Keep searchin',
Martin


BTW: That's just one possible answer for both the science and for my postings.
See new freedom: Mageia Linux
Take a look for yourself: Linux Format
The Future is what We all make IT (GPLv3)
ID: 915846 · Report as offensive
Profile ML1
Volunteer moderator
Volunteer tester

Send message
Joined: 25 Nov 01
Posts: 21129
Credit: 7,508,002
RAC: 20
United Kingdom
Message 915854 - Posted: 8 Jul 2009, 21:12:31 UTC

... And...

Have we broken the limits yet for a monolithic database hosted on a single server?


Happy crunchin',
Martin

See new freedom: Mageia Linux
Take a look for yourself: Linux Format
The Future is what We all make IT (GPLv3)
ID: 915854 · Report as offensive
Profile Matt Lebofsky
Volunteer moderator
Project administrator
Project developer
Project scientist
Avatar

Send message
Joined: 1 Mar 99
Posts: 1444
Credit: 957,058
RAC: 0
United States
Message 915855 - Posted: 8 Jul 2009, 21:13:35 UTC - in response to Message 915839.  
Last modified: 8 Jul 2009, 21:14:39 UTC

No no no I didn't mean that at all. I'm not saying you're wasting electricity. We still haven't fully covered the Arecibo sky yet with multibeam observations, for example.

What I am saying is we don't need to adhere to a 24/7/365 uptime policy because of the fear that we'll lose our participants forever. I have enough professional experience to prove that if you want to win customers (or fans) back after a long hiatus, you simply ask them nicely, and they return. In fact I've proven this time and time again with the reminder e-mails. Others feel we need to keep the workflow happening at all costs or we're ruined. What do you think?

Basically all I meant was that we can afford to take more long hiatuses to take care of long standing sub projects (like final data analysis?!), and perhaps come up with new/improved SETI@home-esque projects - all of which would be far easier to do if we were not as preoccupied with keeping data flow happening 100% of the time.

- Matt


Or, to be a little extreme, calling SETI@home done, turning off the downloads for good, and moving on to the next thing (something I am actually in favor of doing sooner than later, but the others around here seem to disagree).


Hmm, can you explain this in a little more details please? CallingSETI@home done, sounds as if you're saying that in your opinion all the works people are doing now is useless, or at least that you don't need the results any longer, for some reasons.

If that's the case please tell us rather sooner than later, so we can stop wasting electricity on something you really don't need.

Sten-Arne

-- BOINC/SETI@home network/web/science/development person
-- "Any idiot can have a good idea. What is hard is to do it." - Jeanne-Claude
ID: 915855 · Report as offensive
Profile ML1
Volunteer moderator
Volunteer tester

Send message
Joined: 25 Nov 01
Posts: 21129
Credit: 7,508,002
RAC: 20
United Kingdom
Message 915860 - Posted: 8 Jul 2009, 21:23:37 UTC - in response to Message 915855.  
Last modified: 8 Jul 2009, 21:26:00 UTC

No no no I didn't mean that at all...

Darn... That makes for a very short thread!

What I am saying is we don't need to adhere to a 24/7/365 uptime policy because of the fear that we'll lose our participants forever. I have enough professional experience to prove that if you want to win customers (or fans) back after a long hiatus, you simply ask them nicely, and they return. ...

I agree.

I'd be happy to see a hiatus so that science can be done or good fixes be put in place if needed rather than waste effort just for the sake of 'appearances'.


I would hope that at least the people that care enough to check out these forums are also caring enough to appreciate a wider picture beyond just achieving whatever RAC...


And thanks Matt as ever for the postings and the server efforts!

Keep searchin',

Regards,
Martin
See new freedom: Mageia Linux
Take a look for yourself: Linux Format
The Future is what We all make IT (GPLv3)
ID: 915860 · Report as offensive
Profile JimHilty2
Avatar

Send message
Joined: 30 Apr 03
Posts: 75
Credit: 7,199,464
RAC: 0
Germany
Message 915863 - Posted: 8 Jul 2009, 21:28:13 UTC - in response to Message 915855.  

Thank you Matt, pobably the simplest most satisfying post I have read on the boards in all the years. I totally agree. Start the analysis and if nothing found then we do it again but differently. thank you agaain



No no no I didn't mean that at all. I'm not saying you're wasting electricity. We still haven't fully covered the Arecibo sky yet with multibeam observations, for example.

What I am saying is we don't need to adhere to a 24/7/365 uptime policy because of the fear that we'll lose our participants forever. I have enough professional experience to prove that if you want to win customers (or fans) back after a long hiatus, you simply ask them nicely, and they return. In fact I've proven this time and time again with the reminder e-mails. Others feel we need to keep the workflow happening at all costs or we're ruined. What do you think?

Basically all I meant was that we can afford to take more long hiatuses to take care of long standing sub projects (like final data analysis?!), and perhaps come up with new/improved SETI@home-esque projects - all of which would be far easier to do if we were not as preoccupied with keeping data flow happening 100% of the time.

- Matt


Or, to be a little extreme, calling SETI@home done, turning off the downloads for good, and moving on to the next thing (something I am actually in favor of doing sooner than later, but the others around here seem to disagree).


Hmm, can you explain this in a little more details please? CallingSETI@home done, sounds as if you're saying that in your opinion all the works people are doing now is useless, or at least that you don't need the results any longer, for some reasons.

If that's the case please tell us rather sooner than later, so we can stop wasting electricity on something you really don't need.

Sten-Arne


ID: 915863 · Report as offensive
1mp0£173
Volunteer tester

Send message
Joined: 3 Apr 99
Posts: 8423
Credit: 356,897
RAC: 0
United States
Message 915867 - Posted: 8 Jul 2009, 21:38:53 UTC - in response to Message 915855.  
Last modified: 8 Jul 2009, 21:39:10 UTC

What I am saying is we don't need to adhere to a 24/7/365 uptime policy because of the fear that we'll lose our participants forever.


(much deleted)

Kind of like LHC, who made similar promises to SETI@Home -- sometimes there will be work, sometimes there won't.
ID: 915867 · Report as offensive
zpm
Volunteer tester
Avatar

Send message
Joined: 25 Apr 08
Posts: 284
Credit: 1,659,024
RAC: 0
United States
Message 915884 - Posted: 8 Jul 2009, 22:26:31 UTC - in response to Message 915867.  

i agree with matt.... until fresh data(and un-noisy) is here... i say that the servers and system could use a break and it would give time for yall to get some back-end duties done instead of babysitting.

I recommend Secunia PSI: http://secunia.com/vulnerability_scanning/personal/
Go Georgia Tech.
ID: 915884 · Report as offensive
Profile Jord
Volunteer tester
Avatar

Send message
Joined: 9 Jun 99
Posts: 15184
Credit: 4,362,181
RAC: 3
Netherlands
Message 915889 - Posted: 8 Jul 2009, 22:44:44 UTC

Matt, isn't it possible to use some old telephone lines, if there are any available from the building up the hill to down where the ISP's connection is coming in? VDSL might then be an option, if only temporarily and if it meets the distance.

But isn't a bog standard telephone line capable of up to 10Gbits/sec?
ID: 915889 · Report as offensive
1mp0£173
Volunteer tester

Send message
Joined: 3 Apr 99
Posts: 8423
Credit: 356,897
RAC: 0
United States
Message 915890 - Posted: 8 Jul 2009, 22:46:11 UTC - in response to Message 915884.  

i agree with matt.... until fresh data(and un-noisy) is here... i say that the servers and system could use a break and it would give time for yall to get some back-end duties done instead of babysitting.

It seems to me that there is a bit of a catch-22 here.

The way one detects "noisy" work is to run it through the system. If you get back a lot of -9's, it was noisy -- but there could be quiet work mixed in.

The other problem (and someone will find the link and point to it, I'm sure) is that different angle ranges are just inherently fast or inherently slow, depending on how the telescope was moving.

So, basically, ya splits yer tapes and ya takes yer chances.
ID: 915890 · Report as offensive
Profile ML1
Volunteer moderator
Volunteer tester

Send message
Joined: 25 Nov 01
Posts: 21129
Credit: 7,508,002
RAC: 20
United Kingdom
Message 915892 - Posted: 8 Jul 2009, 22:53:15 UTC - in response to Message 915889.  

But isn't a bog standard telephone line capable of up to 10Gbits/sec

Nice hopeful idea. However...

The simple answer to that is: no.

Using DSL, you're lucky to get 8Mbit/s over 1km of phone line cable.

Regards,
Martin

See new freedom: Mageia Linux
Take a look for yourself: Linux Format
The Future is what We all make IT (GPLv3)
ID: 915892 · Report as offensive
1mp0£173
Volunteer tester

Send message
Joined: 3 Apr 99
Posts: 8423
Credit: 356,897
RAC: 0
United States
Message 915893 - Posted: 8 Jul 2009, 22:54:17 UTC - in response to Message 915889.  

But isn't a bog standard telephone line capable of up to 10Gbits/sec?

No where near.

A plain telco line is "Category 3" and is good up to about 16 MHz.

16 MHz is 16 megabaud, and that's 16 megabits if you use simple encoding.

Cat6a is good to 500 MHz, and by encoding multiple bits per state that gets to 10 Gigabits.

There are companies like Hatteras Networks who have demonstrated Gigabit speeds over some serious distances (more than a mile) by running slower speeds over many, many pairs.

... but if there aren't enough pairs in the building, that doesn't work.

It is still up to the CNS department to pick the technology, and then give 'em a price.

ID: 915893 · Report as offensive
Profile Jord
Volunteer tester
Avatar

Send message
Joined: 9 Jun 99
Posts: 15184
Credit: 4,362,181
RAC: 3
Netherlands
Message 915898 - Posted: 8 Jul 2009, 23:04:37 UTC - in response to Message 915892.  

Using DSL, you're lucky to get 8Mbit/s over 1km of phone line cable.

I wouldn't be so sure; I'm more than 1 click away from the local hub and I have 20Mbit already 9the modem/router can go as high as 100Mbit for internet). Bog standard telephone lines. The fiber lies next to it, but it's not in use yet.

But we aren't necessarily talking xDSL here, just data transfer. Just a (home) network and for that you can use old electricity cables, old telephone cables, old TV cables, whatever is around. See network Media in Home network for some examples and their maximum speeds.

As for the telephone wires and their maximum speed, it may not be 10Gbit, but 1Gbit is a possibility. Depends on the state of the old line, though and the amount of hops it takes. But otherwise.... ;-)
ID: 915898 · Report as offensive
1mp0£173
Volunteer tester

Send message
Joined: 3 Apr 99
Posts: 8423
Credit: 356,897
RAC: 0
United States
Message 915906 - Posted: 8 Jul 2009, 23:19:54 UTC - in response to Message 915898.  

Using DSL, you're lucky to get 8Mbit/s over 1km of phone line cable.

I wouldn't be so sure; I'm more than 1 click away from the local hub and I have 20Mbit already 9the modem/router can go as high as 100Mbit for internet). Bog standard telephone lines. The fiber lies next to it, but it's not in use yet.

But we aren't necessarily talking xDSL here, just data transfer. Just a (home) network and for that you can use old electricity cables, old telephone cables, old TV cables, whatever is around. See network Media in Home network for some examples and their maximum speeds.

As for the telephone wires and their maximum speed, it may not be 10Gbit, but 1Gbit is a possibility. Depends on the state of the old line, though and the amount of hops it takes. But otherwise.... ;-)

Jord,

What we're talking here isn't really signalling, it's radio that happens to run along wires.

... and as the frequency goes up, the wavelength goes down. Shorter wavelength means smaller antenna.

At 10 MHz, a wavelength is right at 30 meters, and a wire that is an odd multiple of 7.5 meters long is going to radiate (and receive) signals.

At 10 GHz, it's more like every 7.5 millimeters.

As the wavelength gets shorter, the tolerances in a good transmission line get smaller. You can tolerate bridge taps (on phone lines) at 10 MHz, but at 10 GHz every little bump is a place where signal gets reflected back instead of moving toward the receiver.

Lots of tricks to get around that, and occasionally, we get lucky and get a pristine wire pair and perfect conditions.

... but it's tough.

-- Ned
ID: 915906 · Report as offensive
1 · 2 · 3 · 4 · Next

Message boards : Technical News : On Bandwidth (Jul 08 2009)


 
©2024 University of California
 
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.