Frustrating and Hot Video Cards

Questions and Answers : GPU applications : Frustrating and Hot Video Cards
Message board moderation

To post messages, you must log in.

AuthorMessage
rMuD

Send message
Joined: 8 Apr 09
Posts: 13
Credit: 306,467
RAC: 0
United States
Message 886718 - Posted: 20 Apr 2009, 17:19:12 UTC

Running 6.6.23 as of Last Night out of frustration with 6.6.20 performance. 6.6.23 was no help

2 260 GTX Video Card, one has 2 1920x1200 monitors plugged into it, the other has none. (Configured for Multi-Monitor SLI). SLI is not in use. No Overclocking is being done.

Started out 2 days ago with it completing the work units in 9-13 minutes when PC is in use. One GPU flopped over to over 1 hour with the normal 2.5 minutes of working being done per unit. The the other fell into the > 1 Hour then > 2 hour.. one GPU was not being used at all the default Core was at 300mhz and the memory was at 100mhz. Rebooted didn't fix it, then went to 6.6.23 now it's working the GPU's more (Fans blowing hard, and it's getting warm in here) but still takeing > 1h to do a block, even with no apps running, and minimalized processes running as well, no user interaction for hours.



Any Ideas?

Thanks,

Rob
ID: 886718 · Report as offensive
rMuD

Send message
Joined: 8 Apr 09
Posts: 13
Credit: 306,467
RAC: 0
United States
Message 886722 - Posted: 20 Apr 2009, 17:40:41 UTC - in response to Message 886720.  

CPU is water cooled and I've never heard that fan kick up, the fans on the video cards adjust as the heat (Load) goes up. Without Boinc Running, unless I'm in a 3D game the video cards are almost silent and cool. Boinc Was 2 days ago were at idle levels and doing WUs in 11-15 minutes, now BOINC is not only generating load on the GPU it is now taking 6-7 Times longer (> 1h) to process a WU. Yes, I checked for work unit size, giving the same credit as 2 days ago.
ID: 886722 · Report as offensive
Profile popandbob
Volunteer tester

Send message
Joined: 19 Mar 05
Posts: 551
Credit: 4,673,015
RAC: 0
Canada
Message 886774 - Posted: 20 Apr 2009, 20:30:03 UTC

I would suspect you've found a VLAR.
Its a known problem that they take a lot longer than they should

Different versions of Boinc wont help.

You might try one of the VLAR kill mod apps available from Raistmer (See number crunching forum)

But you should also increase fan speed as those cards are running a hot. My GTX 260 is over-clocked and seeing temps in the 70s.
I see one of your cards is over-clocked as well (the one on the right in your picture)

Bob


Do you Good Search for Seti@Home? http://www.goodsearch.com/?charityid=888957
Or Good Shop? http://www.goodshop.com/?charityid=888957
ID: 886774 · Report as offensive
rMuD

Send message
Joined: 8 Apr 09
Posts: 13
Credit: 306,467
RAC: 0
United States
Message 886839 - Posted: 21 Apr 2009, 1:14:34 UTC - in response to Message 886774.  
Last modified: 21 Apr 2009, 1:15:29 UTC

set the fans to 100% it cooled them down to 60C which was nice, but it was like I was living in a computer room again. Didn't make a difference, they started at 11m per WU then after several hours it was back to > 1h WU. Loaded the optimized builds for this pc, the cuda stuff doesn't come in. So I got my peace and quiet back, and will wait til cuda is a bit more stable before trying it again I guess
ID: 886839 · Report as offensive

Questions and Answers : GPU applications : Frustrating and Hot Video Cards


 
©2025 University of California
 
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.