Hole in the Rock (Jan 22 2009)

Author	Message
Matt Lebofsky Volunteer moderator Project administrator Project developer Project scientist Send message Joined: 1 Mar 99 Posts: 1444 Credit: 957,058 RAC: 0	Message 856590 - Posted: 22 Jan 2009, 23:34:01 UTC We continue to have problems mounting our raw data drives (which we fill down at Arecibo and drain up here). The symptoms are random, the error messages are random, and where these messages actually appear is random. Jeff and I are pretty much giving up trying to figure it out. We'll most likely remove as many moving parts from the whole system and deal with continuing issues as they arise. Not sure who/what to blame. Linux? SATA? USB? The enclosures? The cables? The drives themselves? I actually got the software radar blanker working. Whether or not the output it generates is worth anything remains to be seen, but at first glance it looks pretty good. The proof is when I run this on a whole file and make some workunits, and then see if these workunits explode. - Matt -- BOINC/SETI@home network/web/science/development person -- "Any idiot can have a good idea. What is hard is to do it." - Jeanne-Claude ID: 856590 ·

Richard Haselgrove Volunteer tester Send message Joined: 4 Jul 99 Posts: 14599 Credit: 200,643,578 RAC: 874	Message 856595 - Posted: 22 Jan 2009, 23:48:24 UTC Ye gods. Exploding workunits? Does my warranty cover that? <grin> ID: 856595 ·

1mp0Â£173 Volunteer tester Send message Joined: 3 Apr 99 Posts: 8423 Credit: 356,897 RAC: 0	Message 856601 - Posted: 23 Jan 2009, 0:13:23 UTC - in response to Message 856595. Last modified: 23 Jan 2009, 0:13:40 UTC Ye gods. Exploding workunits? Does my warranty cover that? <grin> Who cares about the warranty, who is going to clean up the mess? :-) ID: 856601 ·

Geek@Play Volunteer tester Send message Joined: 31 Jul 01 Posts: 2467 Credit: 86,146,931 RAC: 0	Message 856619 - Posted: 23 Jan 2009, 0:44:16 UTC Matt........your bringing back some wonderful memories. Been there, done that. Boinc....Boinc....Boinc....Boinc.... ID: 856619 ·

Dr. C.E.T.I. Send message Joined: 29 Feb 00 Posts: 16019 Credit: 794,685 RAC: 0	Message 856620 - Posted: 23 Jan 2009, 0:44:26 UTC . . . Thanks as usual for the Updates Matt ps - you might look into sometjhing i sent Eric a short bit ago - interesting BOINC Wiki . . . Science Status Page . . . ID: 856620 ·

W-K 666 Volunteer tester Send message Joined: 18 May 99 Posts: 18555 Credit: 40,757,560 RAC: 67	Message 856680 - Posted: 23 Jan 2009, 2:52:50 UTC So now after the exploding downloads, Got much more work than asked for, we are going to get exploding tasks. Time to dig out the protective clothing etc. ID: 856680 ·

KWSN THE Holy Hand Grenade! Volunteer tester Send message Joined: 20 Dec 05 Posts: 3187 Credit: 57,163,290 RAC: 0	Message 856753 - Posted: 23 Jan 2009, 10:07:12 UTC Last modified: 23 Jan 2009, 10:16:09 UTC at about 0200 PST, I started getting: 1/23/2009 1:56:17 AM\|SETI@home\|Message from server: No work sent 1/23/2009 1:56:17 AM\|SETI@home\|Message from server: CPU app exists for SETI@home Enhanced but no CPU work requested 1/23/2009 1:56:17 AM\|SETI@home\|Message from server: (your BOINC client is old - please install current version) followed by: 1/23/2009 1:58:50 AM\|SETI@home\|Message from server: No work sent 1/23/2009 1:58:50 AM\|SETI@home\|Message from server: CPU app exists for SETI@home Enhanced but no CPU work requested 1/23/2009 1:58:50 AM\|SETI@home\|Message from server: No work available for the applications you have selected. Please check your settings on the web site. 1/23/2009 1:58:50 AM\|SETI@home\|Message from server: (your BOINC client is old - please install current version) This just after sucessfully getting a block of 20 WU's for the same computer (which is running version 5.10.45...) Did something change on Berkeley's end, 'cause nothing changed on mine! [add]Each time I got these messages, I also got "communication deffered" for 24 hrs, BTW [/add] . Hello, from Albany, CA!... ID: 856753 ·

Pooh Bear 27 Volunteer tester Send message Joined: 14 Jul 03 Posts: 3222 Credit: 4,603,826 RAC: 0	Message 856973 - Posted: 24 Jan 2009, 0:20:51 UTC Matt, Thanks for all the updates. What happened to your taking Thursday off, and being in on Friday? That didn't last long. ID: 856973 ·

OzzFan Volunteer tester Send message Joined: 9 Apr 02 Posts: 15691 Credit: 84,761,841 RAC: 28	Message 857079 - Posted: 24 Jan 2009, 5:55:28 UTC - in response to Message 856590. Not sure who/what to blame. Linux? SATA? USB? The enclosures? The cables? The drives themselves? Either blame Canada or blame Misfit. ID: 857079 ·

Zebra3 Send message Joined: 22 Oct 01 Posts: 186 Credit: 13,658,148 RAC: 0	Message 857118 - Posted: 24 Jan 2009, 8:52:03 UTC - in response to Message 857079. Not sure who/what to blame. Linux? SATA? USB? The enclosures? The cables? The drives themselves? Either blame Canada or blame Misfit. Its always Canada's fault...why can't it be Switzerland's fault this time...lol http://www.novascotia.com ID: 857118 ·

Greg Send message Joined: 12 Oct 07 Posts: 6 Credit: 1,031,943 RAC: 0	Message 857141 - Posted: 24 Jan 2009, 10:44:27 UTC Well you know the golden rule of flakey hardware - Its always the last thing you test! If all else fails, check that the hamster's wheel hasn't shifted off axis. ID: 857141 ·

Lois Petrolito Send message Joined: 9 Nov 03 Posts: 10 Credit: 68,170 RAC: 0	Message 857185 - Posted: 24 Jan 2009, 15:15:21 UTC Maybe that's why I haven't gotten any new work in about a week. Or, it could be BOINC itself doing it. I'm on multiple projects, and when I get work units from one, I get nothing from anyone else unless I suspend that particular project. ID: 857185 ·

Death2Gnomes Volunteer tester Send message Joined: 30 Nov 00 Posts: 48 Credit: 246,481 RAC: 0	Message 857202 - Posted: 24 Jan 2009, 15:58:39 UTC - in response to Message 857118. Not sure who/what to blame. Linux? SATA? USB? The enclosures? The cables? The drives themselves? Either blame Canada or blame Misfit. Its always Canada's fault...why can't it be Switzerland's fault this time...lol There are no Gremlins in Switzerland. AMC couldn't afford to send any there. "Red Warrior Needs Food Badly" ID: 857202 ·

.clair. Send message Joined: 4 Nov 04 Posts: 1300 Credit: 55,390,408 RAC: 69	Message 857265 - Posted: 24 Jan 2009, 18:46:19 UTC since about 15:00 hrs utc friday the gigabit net graphs show that the connection is running at maximum rate. Ime getting connection timeouts, everything seems to be working, its just got an lot of work to do. ID: 857265 ·

Neil Blaikie Volunteer tester Send message Joined: 17 May 99 Posts: 143 Credit: 6,652,341 RAC: 0	Message 857267 - Posted: 24 Jan 2009, 18:49:46 UTC Seems like something is going on as haven't been able to upload anything since very early this morning. ID: 857267 ·

Kaylie Send message Joined: 26 Jul 08 Posts: 39 Credit: 333,106 RAC: 0	Message 857304 - Posted: 24 Jan 2009, 20:07:19 UTC - in response to Message 857267. Is it possible that work is being split into such small parts that there are so many of them they are jamming up transfers? It seems all the MB tasks I have been getting are smaller than usual. ID: 857304 ·

Bendarr Send message Joined: 27 Dec 08 Posts: 1 Credit: 11,624 RAC: 0	Message 857312 - Posted: 24 Jan 2009, 20:13:06 UTC - in response to Message 857267. Last modified: 24 Jan 2009, 20:13:46 UTC I am likewise having upload problems. I had roughly 4 units and managed to upload maybe 2 units and I've got 2 more but I keep getting deferred as well. ID: 857312 ·

Adrian Foster Send message Joined: 26 Jul 06 Posts: 3 Credit: 98,885 RAC: 0	Message 857319 - Posted: 24 Jan 2009, 20:19:31 UTC My post may or may not be related to this thread. Don't know. All I know is that for one whole week now my computer has suspended all work on BOINC. All computation and all upload. I have an astropulse ready to upload and for some reason the computer has suspended it. I cannot unsuspend it. Oh, and I promise you - I have done nothing in that week, barely used the computer infact. Why would it be doing this ? I cannot unsuspend it, upload the completed file or get new ones ????? ID: 857319 ·

Krisk Send message Joined: 18 Jul 99 Posts: 9 Credit: 1,845,297 RAC: 0	Message 857333 - Posted: 24 Jan 2009, 20:43:25 UTC Haven't been able to upload since last night 1/23/09, 22.30 PST. ID: 857333 ·

Misfit Volunteer tester Send message Joined: 21 Jun 01 Posts: 21804 Credit: 2,815,091 RAC: 0	Message 857339 - Posted: 24 Jan 2009, 21:16:54 UTC - in response to Message 857079. Not sure who/what to blame. Linux? SATA? USB? The enclosures? The cables? The drives themselves? Either blame Canada or blame Misfit. I was going to quote that line and say how disappointed I was. I am no longer disappointed. me@rescam.org ID: 857339 ·

©2023 University of California

SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.