Getting a lot of these errors over the last month or so not sure what it means can anyone shed some light......

3/5/2008 12:36:33 AM|SETI@home|Reason: Unrecoverable error for result 30mr07ab.17069.9479.5.7.48_1 ( - exit code -1073741819 (0xc0000005))

3/5/2008 12:36:35 AM|SETI@home|Reason: Unrecoverable error for result 30mr07ab.17069.9479.5.7.50_1 ( - exit code -1073741819 (0xc0000005))

3/2/2008 6:20:12 PM|SETI@home|Reason: Unrecoverable error for result 25ja07ac.9978.10706.16.7.41_0 ( - exit code -1073741819 (0xc0000005))



5 Mar 2008 5:14:19 UTC 5 Mar 2008 5:35:39 UTC Over Client error Compute error 880.55 2.83 ---
774143781 232812819 5 Mar 2008 1:21:39 UTC 5 Mar 2008 5:14:19 UTC Over Client error Compute error 5,264.09 14.80 ---
773993426 232743947 4 Mar 2008 23:53:32 UTC 5 Mar 2008 5:14:19 UTC Over Client error Compute error 6,947.77 17.31 ---
773967516 231457901 4 Mar 2008 23:31:57 UTC 5 Mar 2008 4:07:42 UTC Over Client error Compute error 1,569.58 5.86 ---
773967494 231456402 4 Mar 2008 23:31:57 UTC 5 Mar 2008 4:07:42 UTC Over Success Done 4,313.88 19.12 19.12
773912002 232706692 4 Mar 2008 23:08:56 UTC 4 Mar 2008 23:30:24 UTC Over Client error Compute error 765.64 2.40 ---
773911062 232706340 4 Mar 2008 23:08:36 UTC 4 Mar 2008 23:30:24 UTC Over Client error Compute error 920.61 3.06 ---
773889699 232696568 4 Mar 2008 17:28:01 UTC 4 Mar 2008 23:08:36 UTC Over Client error Compute error 1,080.94 3.48 ---
773862661 232684183 4 Mar 2008 16:57:56 UTC 4 Mar 2008 23:08:36 UTC Over Success Done 14,099.67 31.25 pending
773834922 232673491 4 Mar 2008 16:27:53 UTC 4 Mar 2008 17:28:01 UTC Over Client error Compute error 1,448.41 3.71 ---
773808934 232662651 4 Mar 2008 15:57:57 UTC 4 Mar 2008 16:57:56 UTC Over Client error Compute error 1,300.77 4.31 ---
773795631 232656891 4 Mar 2008 15:41:55 UTC 4 Mar 2008 16:27:53 UTC Over Client error Compute error 1,307.25 4.34 ---
773707711 232617472 4 Mar 2008 13:58:47 UTC 4 Mar 2008 15:57:57 UTC Over Client error Compute error 1,297.16 4.23 ---
773703100 232615661 4 Mar 2008 13:53:26 UTC 4 Mar 2008 15:41:55 UTC Over Success Done 4,127.92 19.32 19.32
773571060 232501815 4 Mar 2008 11:23:01 UTC 4 Mar 2008 13:53:26 UTC Over Client error Compute error 1,157.36 2.92 ---
773246217 232183635 4 Mar 2008 5:58:35 UTC 4 Mar 2008 23:08:36 UTC Over Success Done 20,112.64 52.02 pending
773093819 232016690 4 Mar 2008 3:24:22 UTC 4 Mar 2008 8:24:29 UTC Over Client error Compute error 1,199.88 5.02 ---

Thanks

---

There are a few possibilities.

1) Did you install an optimized S@H app? If so, did you get the right one?

2) Is the computer overclocked? If so, can you try without the overclock for a while?

3) Can you check the CPU temperature? Is it too high?

4) When was the last time you opened the case and chased the dust bunnies out?

5) What changes did you make to the computer about the time it started failing? Could one of those changes be the problem?

---

BOINC WIKI

There are a few possibilities.

1) Did you install an optimized S@H app? If so, did you get the right one?


**** No new app just the plain vanilla seti at home on the boinc client 5.8.16
using setiathome_enhanced version 527 on a Processor: 2 GenuineIntel Intel(R) Pentium(R) 4 CPU 3.40GHz [x86 Family 15 Model 3 Stepping 4] [fpu tsc sse sse2 mmx]

Ran a new benchmark to see if my processor or memory is acting up here are the results....

3/6/2008 10:11:54 PM||Running CPU benchmarks
3/6/2008 10:12:56 PM||Benchmark results:
3/6/2008 10:12:56 PM|| Number of CPUs: 2
3/6/2008 10:12:56 PM|| 1449 floating point MIPS (Whetstone) per CPU
3/6/2008 10:12:56 PM|| 1794 integer MIPS (Dhrystone) per CPU

nothing seems to be out of the ordinary..


2) Is the computer overclocked? If so, can you try without the overclock for a while?

****** No overclocking at all.

3) Can you check the CPU temperature? Is it too high?

*****Checked the temp and all seems normal in bios logs and event log of windows. I have thermal readout in my event log from a dell optiplex gx620.

4) When was the last time you opened the case and chased the dust bunnies out?

****Case is actually open now has been for quite some time as I have a small rattle and cant seem to find it.

5) What changes did you make to the computer about the time it started failing? Could one of those changes be the problem?

****** No changes in the computer in 6 to 8 months physically software wise just the newest itunes in the last month....took that out as thought that would be problem and put old one back still same issue....put new one back in and same thing so dont think that is the issue......


Thanks for input by the way I appreciate it. Really looking for some one to bounce it off of as I have tried many thing and am at a loss

---

3) Can you check the CPU temperature? Is it too high?

*****Checked the temp and all seems normal in bios logs and event log of windows. I have thermal readout in my event log from a dell optiplex gx620.

4) When was the last time you opened the case and chased the dust bunnies out?

****Case is actually open now has been for quite some time as I have a small rattle and cant seem to find it.

Try SpeedFan (freeware) to check the temperatures and voltages.
As the case is open you can touch here and there inside to check
(just remove your watch and ring before you do)


Do you have problems with other CPU intensive programs?
(you can try Everest - System Stability Test
or run some 3D Mark test/demo)

"Case is actually open" but how much dust is in there?
(use weak vacuum and soft hair (not synthetic) brush
to clean the dust - of course shutdown and unplug first)

Maybe your cat plays inside :) (and likes to bite the wires)
(use strong light and look inside - maybe something is loose
or capacitors are bulged and/or leaking)

.

Hi, I have had the same prob over past couple of weeks on three pc's. No changes been made to pc's etc. Just loads of comp/client errors?????

Hi, I have had the same prob over past couple of weeks on three pc's. No changes been made to pc's etc. Just loads of comp/client errors?????

I spot checked some of your results. They were part of the bad batch. Nothing to worry about at this point.

---

Wendy



Click Here for BOINC FAQ Service

(I, Bil:)

Try SpeedFan (freeware) to check the temperatures and voltages.
As the case is open you can touch here and there inside to check
(just remove your watch and ring before you do)


Do you have problems with other CPU intensive programs?
(you can try Everest - System Stability Test
or run some 3D Mark test/demo)

"Case is actually open" but how much dust is in there?
(use weak vacuum and soft hair (not synthetic) brush
to clean the dust - of course shutdown and unplug first)

Maybe your cat plays inside :) (and likes to bite the wires)
(use strong light and look inside - maybe something is loose
or capacitors are bulged and/or leaking)

.

(Part of my letter to SpeedFan author:)

I've found one adverse effect of SpeedFan:

When the Monitor/Video sleep (Not the computer - only Monitor)
SpeedFan uses too much CPU time (for whatever reason).

I know this because BOINC/SETI (Low priority process)
almost stop computing when Monitor/Video sleep.

If I exit SpeedFan there is no such effect.


I can check this 2 ways:

1) after long (Monitor) sleep there is almost no change of the % of work done;
2) I can observe the execution from another computer on LAN (by BoincLogX utility)

(Part of my letter to SpeedFan author:)

I've found one adverse effect of SpeedFan:

When the Monitor/Video sleep (Not the computer - only Monitor)
SpeedFan uses too much CPU time (for whatever reason).

I know this because BOINC/SETI (Low priority process)
almost stop computing when Monitor/Video sleep.

If I exit SpeedFan there is no such effect.


I can check this 2 ways:

1) after long (Monitor) sleep there is almost no change of the % of work done;
2) I can observe the execution from another computer on LAN (by BoincLogX utility)

This would be a very serious problem for speedfan if true. However I have speedfan running on 6 computers 24/7 and have not seen this problem occuring. All my computers running Windows XP SP2 of course.

(Part of my letter to SpeedFan author:)

I've found one adverse effect of SpeedFan:

When the Monitor/Video sleep (Not the computer - only Monitor)
SpeedFan uses too much CPU time (for whatever reason).

I know this because BOINC/SETI (Low priority process)
almost stop computing when Monitor/Video sleep.

If I exit SpeedFan there is no such effect.


I can check this 2 ways:

1) after long (Monitor) sleep there is almost no change of the % of work done;
2) I can observe the execution from another computer on LAN (by BoincLogX utility)

This would be a very serious problem for speedfan if true. However I have speedfan running on 6 computers 24/7 and have not seen this problem occuring. All my computers running Windows XP SP2 of course.

Do you have this picture when Monitor/Video WakeUp:
(as you can see when Monitor/Video sleep reading is 0 deg C)
(the GPU/VideoRAM MHz are: normal - 144/185 (Overclock), sleep - 0.84/0.84; - as seen in RivaTuner Hardware Monitoring)
(When Everest is running it wakes up the GPU (after only 10 sec of sleeping) to 144 MHz and vRAM to 6 MHz)






The Sensor chip:






The Test System (Everest info):

Computer:
Operating System - Microsoft Windows 98 SE
Internet Explorer - 6.0.2800.1106 (IE 6.0 SP1)
DirectX - 4.09.00.0904 (DirectX 9.0c)

Motherboard:
CPU Type - AMD K6-2+, 500 MHz (5 x 100)
Motherboard Name - Shuttle HOT-591P (3 ISA, 3 PCI, 1 AGP, 2 SIMM, 2 DIMM)
Motherboard Chipset - VIA VT82C598 Apollo MVP3
System Memory - 256 MB (SDRAM)
BIOS Type - Award Modular (03/27/01)

Display:
Video Adapter - NVIDIA GeForce 256 (Omega 9M 1.4523)
3D Accelerator - nVIDIA GeForce 256

Graphics Processor Properties:
Video Adapter - Asus AGP-V6600MX
GPU Code Name - NV10 (AGP 4x 10DE / 0100, Rev 10)
GPU Clock - 144 MHz
Memory Clock - 185 MHz

Sensor Properties:
GPU Sensor Type - Winbond W83781D (NV-I2C 2Dh)
Video Adapter - Asus V Series

Temperatures:
GPU - 47 °C (117 °F)
GPU - Memory 35 °C (95 °F)

Cooling Fans:
GPU - 5592 RPM

Voltage Values:
GPU Core - 2.96 V
GPU Vcc - 3.39 V
GPU AGP VDDQ - 3.39 V


.