v5.27 (MB) live on main.

Message boards : Number crunching : v5.27 (MB) live on main.
Message board moderation

To post messages, you must log in.

Previous · 1 . . . 3 · 4 · 5 · 6 · 7 · 8 · 9 · Next

AuthorMessage
Richard Haselgrove Project Donor
Volunteer tester

Send message
Joined: 4 Jul 99
Posts: 14677
Credit: 200,643,578
RAC: 874
United Kingdom
Message 617921 - Posted: 11 Aug 2007, 10:04:53 UTC - in response to Message 617918.  
Last modified: 11 Aug 2007, 10:07:10 UTC

[snip]as yet I haven't seen the maths behind this, but from past experience they usually get it right.

Andy
edit] We must get Tony AKA Astro to fire up the P60 again to test it.

OK Andy, I took the hint. However, it's pre-coffee A.M here, and I fell for it. I VNCed to the P60, deleted the app-info and simon-ben-joe, reset seti and now I'm stuck with a machine that (like everyone else) is getting no work and is sitting idle (not that the difference between idle and 100% is all that much). If last time was any indication, it won't make the deadline this time either and I'd have lost 2 months (1/6th of a year)processing. LOL

tony

Just leave it trying - I've just done the same with my Celeron MMX, and it got a WU within 10 minutes (after five retries).

If you're lucky, you'll get an 07 MB WU with a deadline in October - you should have a chance of making that?
ID: 617921 · Report as offensive
Astro
Volunteer tester
Avatar

Send message
Joined: 16 Apr 02
Posts: 8026
Credit: 600,015
RAC: 0
Message 617929 - Posted: 11 Aug 2007, 10:45:48 UTC

Got one, a HIGH AR one, See the P60 thread for more WU info post
ID: 617929 · Report as offensive
Profile Philadelphia
Volunteer tester
Avatar

Send message
Joined: 12 Feb 07
Posts: 1590
Credit: 399,688
RAC: 0
United States
Message 617942 - Posted: 11 Aug 2007, 11:07:37 UTC - in response to Message 617717.  
Last modified: 11 Aug 2007, 11:10:24 UTC

Well,

must be cause there were about 25 different apps to update...the 5.27 entries got lost in the fray.

Everyone who downloaded until now, edit as directed by a few people here if you feel you need to (or want to continue 5.27 WUs), everyone else, just grab the app, the XML files have been edited.

Maybe now I can get some sleep? :oP It's 2:30 a.m. and I can hardly type anymore.

Regards,
Simon.


Simon,

You're always behind the scenes but ahead of the curve.

My 'thumbs up' to you for all the thankless work you do: THANKS!!!



ID: 617942 · Report as offensive
Profile perryjay
Volunteer tester
Avatar

Send message
Joined: 20 Aug 02
Posts: 3377
Credit: 20,676,751
RAC: 0
United States
Message 617971 - Posted: 11 Aug 2007, 12:53:50 UTC - in response to Message 617942.  

Well,

must be cause there were about 25 different apps to update...the 5.27 entries got lost in the fray.

Everyone who downloaded until now, edit as directed by a few people here if you feel you need to (or want to continue 5.27 WUs), everyone else, just grab the app, the XML files have been edited.

Maybe now I can get some sleep? :oP It's 2:30 a.m. and I can hardly type anymore.

Regards,
Simon.


Simon,

You're always behind the scenes but ahead of the curve.

My 'thumbs up' to you for all the thankless work you do: THANKS!!!





Just want to add my thanks to all the people that made this possible. I've upgraded all three of my poor, slow old machines with the new app and Chicken's 2.4. They are all crunching happily away. I did cheat a little bit, I went back to Lunatics and downloaded 2.4 again and just dropped the newest app with 5.27 in it instead of trying to change the appinfo file myself. Worked fine for me.


PROUD MEMBER OF Team Starfire World BOINC
ID: 617971 · Report as offensive
Profile Logan
Volunteer tester
Avatar

Send message
Joined: 26 Jan 07
Posts: 743
Credit: 918,353
RAC: 0
Spain
Message 617977 - Posted: 11 Aug 2007, 13:03:09 UTC

I was upgraded my intel core 2 duo E6300 (with Microsoft Windows XP
Professional Edition, Service Pack 2, (05.01.2600.00)) from 2.2B Chicken app to 2.4 MB SSE3-Intel Core 2 and all works fine... (by the moment)

Good job folks...!!!!
ID: 617977 · Report as offensive
Profile jason_gee
Volunteer developer
Volunteer tester
Avatar

Send message
Joined: 24 Nov 06
Posts: 7489
Credit: 91,093,184
RAC: 0
Australia
Message 617984 - Posted: 11 Aug 2007, 13:14:21 UTC - in response to Message 617977.  
Last modified: 11 Aug 2007, 13:14:35 UTC

Both machines here crunching away with chicken 2.4 quite happily for a while now. 2 x different generation p4s:
Northwood 2.0A (No-HT), on p4SSE2
641 Cedar Mill 3.2 (HT), on p4sse3
Thanks to the Chicken Crew! :D

"Living by the wisdom of computer science doesn't sound so bad after all. And unlike most advice, it's backed up by proofs." -- Algorithms to live by: The computer science of human decisions.
ID: 617984 · Report as offensive
Profile criton
Avatar

Send message
Joined: 28 Feb 00
Posts: 131
Credit: 13,351,000
RAC: 2
United Kingdom
Message 617985 - Posted: 11 Aug 2007, 13:14:40 UTC
Last modified: 11 Aug 2007, 13:45:49 UTC

i upgraided my core2duo to the new 2.4 ckicken and proceded to trash the mb work units.when i tried to rename the app file to see if it would still do the older work units it trashed them to. im running boinc 5.10.13. with v5.27.
windows vista installed on it. it was running fine till i installed the chicken.
les.
copy of one of the work units.
http://setiathome.berkeley.edu/result.php?resultid=588010655
ID: 617985 · Report as offensive
Dotsch
Volunteer tester
Avatar

Send message
Joined: 9 Jun 99
Posts: 2422
Credit: 919,393
RAC: 0
Germany
Message 618011 - Posted: 11 Aug 2007, 13:52:22 UTC - in response to Message 616970.  
Last modified: 11 Aug 2007, 13:54:48 UTC

I have build binaries for the new multibeam applications for HP-UX (11i V.1..V.3) on PARISC 32 bit, 64 bit and IA64. Till Stefan has notput them on his website, the binaries are available from my site.
Other platforms following asap...

HPUX 11.0 PARISC 32 bit, 64 bit and Linux IA64 binaries ready to use.
More ports for other platforms following asap...
ID: 618011 · Report as offensive
Richard Haselgrove Project Donor
Volunteer tester

Send message
Joined: 4 Jul 99
Posts: 14677
Credit: 200,643,578
RAC: 874
United Kingdom
Message 618023 - Posted: 11 Aug 2007, 14:08:28 UTC - in response to Message 617985.  
Last modified: 11 Aug 2007, 14:13:55 UTC

i upgraided my core2duo to the new 2.4 ckicken and proceded to trash the mb work units.when i tried to rename the app file to see if it would still do the older work units it trashed them to. im running boinc 5.10.13. with v5.27.
windows vista installed on it. it was running fine till i installed the chicken.
les.
copy of one of the work units.
http://setiathome.berkeley.edu/result.php?resultid=588010655

Were those the WUs that crashed around 20:44 UTC last night? Read Simon's posts (may only have been on lunatics.at) [edit - it was at message 617717 in this very thread]: the first downloads didn't have an updated version number in the app_info.xml. Worked fine if you were upgrading from 2.2B to 2.4, couldn't handle the transition from stock 5.27 to Chicken 2.4. The downloads are fixed now, so if you download again and install again it should work fine.

This host is running the Core 2 variant of Chicken 2.4 under Vista.
ID: 618023 · Report as offensive
Profile zoom3+1=4
Volunteer tester
Avatar

Send message
Joined: 30 Nov 03
Posts: 66283
Credit: 55,293,173
RAC: 49
United States
Message 618082 - Posted: 11 Aug 2007, 16:35:20 UTC - in response to Message 617627.  
Last modified: 11 Aug 2007, 16:42:02 UTC

What is the upgrade process for those going from 2.2B to to 2.4?




You got 2 options.

First, let you cache run dry and drop the new app and app_info.xml like you did the first time. (SAFE method)

Second, stop boinc rename the new MB app matching the "old" 2.2 app name and replace the old one with the newly renamed one. restart boinc (UNSAFE method)

HTH





Me I choose a 3rd method, this is for Windows(XP x64 and XP Pro).

1. I stopped Boinc.

2. Then I went to the Boinc/Slots folder and deleted the single exe file in each of the folders in the Slots folder.

3. Then I went to the Projects folder and deleted the 2.2B files and the app_info.xml file.

4. Then I copied the New 2.4 files into the Projects folder from the zip or 7z file.

5. Then I edited the New 2.4 app_info.xml file so that the file has entries that say 515 & 527 only, All other app versions are deleted and except for the name of the file It's like below on all 5 of My PCs, Only the name of the exe file will change really.

<app_info>
<app>
<name>setiathome_enhanced</name>
</app>
<file_info>
<name>KWSN_2.4_SSSE3_IPP_Ben-Joe.exe</name>
<executable/>
</file_info>
<app_version>
<app_name>setiathome_enhanced</app_name>
<version_num>515</version_num>
<file_ref>
<file_name>KWSN_2.4_SSSE3_IPP_Ben-Joe.exe</file_name>
<main_program/>
</file_ref>
</app_version>
<app_version>
<app_name>setiathome_enhanced</app_name>
<version_num>527</version_num>
<file_ref>
<file_name>KWSN_2.4_SSSE3_IPP_Ben-Joe.exe</file_name>
<main_program/>
</file_ref>
</app_version>
</app_info>

6. Finally I restarted Boinc.

Fairly simple and I did this five times of course and I didn't have to let My cache run dry either, As the 2nd option is too dangerous and Sorry Crunch3r the 1st option is like watching either paint dry or Bermuda grass grow.

Oh and Crunch3r thanks for the compile of the 64bit XP x64 2.4 Seti app, They work fine, I'm using the SSE2 Gen on one PC and SSSSE3 on the Intel PCs.
Savoir-Faire is everywhere!
The T1 Trust, T1 Class 4-4-4-4 #5550, America's First HST

ID: 618082 · Report as offensive
Profile Logan
Volunteer tester
Avatar

Send message
Joined: 26 Jan 07
Posts: 743
Credit: 918,353
RAC: 0
Spain
Message 618089 - Posted: 11 Aug 2007, 16:58:22 UTC - in response to Message 618082.  
Last modified: 11 Aug 2007, 17:03:12 UTC

What is the upgrade process for those going from 2.2B to to 2.4?




You got 2 options.

First, let you cache run dry and drop the new app and app_info.xml like you did the first time. (SAFE method)

Second, stop boinc rename the new MB app matching the "old" 2.2 app name and replace the old one with the newly renamed one. restart boinc (UNSAFE method)

HTH





Me I choose a 3rd method, this is for Windows(XP x64 and XP Pro).

1. I stopped Boinc.

2. Then I went to the Boinc/Slots folder and deleted the single exe file in each of the folders in the Slots folder.

3. Then I went to the Projects folder and deleted the 2.2B files and the app_info.xml file.

4. Then I copied the New 2.4 files into the Projects folder from the zip or 7z file.

5. Then I edited the New 2.4 app_info.xml file so that the file has entries that say 515 & 527 only, All other app versions are deleted and except for the name of the file It's like below on all 5 of My PCs, Only the name of the exe file will change really.

<app_info>
<app>
<name>setiathome_enhanced</name>
</app>
<file_info>
<name>KWSN_2.4_SSSE3_IPP_Ben-Joe.exe</name>
<executable/>
</file_info>
<app_version>
<app_name>setiathome_enhanced</app_name>
<version_num>515</version_num>
<file_ref>
<file_name>KWSN_2.4_SSSE3_IPP_Ben-Joe.exe</file_name>
<main_program/>
</file_ref>
</app_version>
<app_version>
<app_name>setiathome_enhanced</app_name>
<version_num>527</version_num>
<file_ref>
<file_name>KWSN_2.4_SSSE3_IPP_Ben-Joe.exe</file_name>
<main_program/>
</file_ref>
</app_version>
</app_info>

6. Finally I restarted Boinc.

Fairly simple and I did this five times of course and I didn't have to let My cache run dry either, As the 2nd option is too dangerous and Sorry Crunch3r the 1st option is like watching either paint dry or Bermuda grass grow.

Oh and Crunch3r thanks for the compile of the 64bit XP x64 2.4 Seti app, They work fine, I'm using the SSE2 Gen on one PC and SSSSE3 on the Intel PCs.

I only was do your 1 and 4 points (and six) and all's work fine.... At firts time....
ID: 618089 · Report as offensive
Profile perryjay
Volunteer tester
Avatar

Send message
Joined: 20 Aug 02
Posts: 3377
Credit: 20,676,751
RAC: 0
United States
Message 618097 - Posted: 11 Aug 2007, 17:34:17 UTC - in response to Message 618089.  









[/quote]
I only was do your 1 and 4 points (and six) and all's work fine.... At firts time....[/quote]

Logan,
That's the way I did it too except I pulled the old 2.2B app_info file out of the folder first. I did have to go download 2.4 again as I got it too quick and got the one without the 5.27 instructions in it. The second time I just dragged the correct files into the folder and let them overwrite the first set. It's wrking fine for me too.



PROUD MEMBER OF Team Starfire World BOINC
ID: 618097 · Report as offensive
Profile TimeLord04
Volunteer tester
Avatar

Send message
Joined: 9 Mar 06
Posts: 21140
Credit: 33,933,039
RAC: 23
United States
Message 618102 - Posted: 11 Aug 2007, 17:50:15 UTC

Holding breath for Soup of the Day with Spice... (2.4 with Graphics.) ...ok - I can't hold my breath that long; still, eagerly awaiting 2.4 with Graphics.

Thanks again to the Coop Team in continuing to create the Soup for all of us.


Sincerely,


TimeLord04
Have TARDIS, will travel...
Come along K-9!
Join Calm Chaos
ID: 618102 · Report as offensive
Profile Logan
Volunteer tester
Avatar

Send message
Joined: 26 Jan 07
Posts: 743
Credit: 918,353
RAC: 0
Spain
Message 618105 - Posted: 11 Aug 2007, 17:53:45 UTC - in response to Message 618097.  
Last modified: 11 Aug 2007, 17:59:37 UTC










I only was do your 1 and 4 points (and six) and all's work fine.... At firts time....[/quote]

Logan,
That's the way I did it too except I pulled the old 2.2B app_info file out of the folder first. I did have to go download 2.4 again as I got it too quick and got the one without the 5.27 instructions in it. The second time I just dragged the correct files into the folder and let them overwrite the first set. It's wrking fine for me too.
[/quote]
I'm glad of that...
Chicken Soup works... My congratolations, Chicken Coop...
(sorry by my little and poor knowledge of english...)
ID: 618105 · Report as offensive
Garry Webb

Send message
Joined: 25 Aug 99
Posts: 40
Credit: 13,561,408
RAC: 0
United States
Message 618458 - Posted: 13 Aug 2007, 5:43:35 UTC

Problem, My AMD machine will not download 2.4 KWSN. I get a 7z file from the mirror. No problems at all with my intel machines. Perhaps someone could advise. Thanks
ID: 618458 · Report as offensive
kittyman Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 9 Jul 00
Posts: 51477
Credit: 1,018,363,574
RAC: 1,004
United States
Message 618462 - Posted: 13 Aug 2007, 5:47:30 UTC - in response to Message 618458.  

Problem, My AMD machine will not download 2.4 KWSN. I get a 7z file from the mirror. No problems at all with my intel machines. Perhaps someone could advise. Thanks


All of the files that Simon has up for download are 7z (zipped) files. You can download the 7zip unzipper here. Freeware, very small, works seamlessly.

"Time is simply the mechanism that keeps everything from happening all at once."

ID: 618462 · Report as offensive
Garry Webb

Send message
Joined: 25 Aug 99
Posts: 40
Credit: 13,561,408
RAC: 0
United States
Message 618469 - Posted: 13 Aug 2007, 6:20:04 UTC - in response to Message 618462.  

Problem, My AMD machine will not download 2.4 KWSN. I get a 7z file from the mirror. No problems at all with my intel machines. Perhaps someone could advise. Thanks


All of the files that Simon has up for download are 7z (zipped) files. You can download the 7zip unzipper here. Freeware, very small, works seamlessly.



I think I may not have been very clear regarding the 7zip file. I have four machines, one(1) is an AMD Windows XP. The downloads for the Intel machines went smoothly. However when I try to use the mirror site to download KWSN 2.4 for the AMD machine (SSE AMD generic) all I get is the 7zip file. I had that file allready on the AMD machine. Tried several times thinking I may have gotten a bit excited at first and made a mistake. Not so, tried again and got the same results. A 7zip file, but no optimized KWSN 2.4 file. Even my 64 bit vista machine was very easy. Thanks
ID: 618469 · Report as offensive
Garry Webb

Send message
Joined: 25 Aug 99
Posts: 40
Credit: 13,561,408
RAC: 0
United States
Message 618472 - Posted: 13 Aug 2007, 6:36:48 UTC - in response to Message 618469.  
Last modified: 13 Aug 2007, 6:39:11 UTC

Problem, My AMD machine will not download 2.4 KWSN. I get a 7z file from the mirror. No problems at all with my intel machines. Perhaps someone could advise. Thanks


All of the files that Simon has up for download are 7z (zipped) files. You can download the 7zip unzipper here. Freeware, very small, works seamlessly.



I think I may not have been very clear regarding the 7zip file. I have four machines, one(1) is an AMD Windows XP. The downloads for the Intel machines went smoothly. However when I try to use the mirror site to download KWSN 2.4 for the AMD machine (SSE AMD generic) all I get is the 7zip file. I had that file allready on the AMD machine. Tried several times thinking I may have gotten a bit excited at first and made a mistake. Not so, tried again and got the same results. A 7zip file, but no optimized KWSN 2.4 file. Even my 64 bit vista machine was very easy. Thanks



OK! I downloaded the same file to a 3.5 floppy on my Intel machine and checked the contents on the same Intel machine. Your right, It's all there. I just don't know what I am not doing to get it right on the AMD machine. Sadly there is not an A drive on the AMD that I can use to transfer the files there.
ID: 618472 · Report as offensive
W-K 666 Project Donor
Volunteer tester

Send message
Joined: 18 May 99
Posts: 19361
Credit: 40,757,560
RAC: 67
United Kingdom
Message 618477 - Posted: 13 Aug 2007, 6:46:14 UTC - in response to Message 618472.  
Last modified: 13 Aug 2007, 6:46:47 UTC

Problem, My AMD machine will not download 2.4 KWSN. I get a 7z file from the mirror. No problems at all with my intel machines. Perhaps someone could advise. Thanks


All of the files that Simon has up for download are 7z (zipped) files. You can download the 7zip unzipper here. Freeware, very small, works seamlessly.



I think I may not have been very clear regarding the 7zip file. I have four machines, one(1) is an AMD Windows XP. The downloads for the Intel machines went smoothly. However when I try to use the mirror site to download KWSN 2.4 for the AMD machine (SSE AMD generic) all I get is the 7zip file. I had that file allready on the AMD machine. Tried several times thinking I may have gotten a bit excited at first and made a mistake. Not so, tried again and got the same results. A 7zip file, but no optimized KWSN 2.4 file. Even my 64 bit vista machine was very easy. Thanks



OK! I downloaded the same file to a 3.5 floppy on my Intel machine and checked the contents on the same Intel machine. Your right, It's all there. I just don't know what I am not doing to get it right on the AMD machine. Sadly there is not an A drive on the AMD that I can use to transfer the files there.

Assuming your computers are networked. Can't you download AMD version to one of your Intels, unzip, and then transfer files.

Andy
ID: 618477 · Report as offensive
Garry Webb

Send message
Joined: 25 Aug 99
Posts: 40
Credit: 13,561,408
RAC: 0
United States
Message 618482 - Posted: 13 Aug 2007, 6:55:47 UTC - in response to Message 618477.  

Problem, My AMD machine will not download 2.4 KWSN. I get a 7z file from the mirror. No problems at all with my intel machines. Perhaps someone could advise. Thanks


All of the files that Simon has up for download are 7z (zipped) files. You can download the 7zip unzipper here. Freeware, very small, works seamlessly.



I think I may not have been very clear regarding the 7zip file. I have four machines, one(1) is an AMD Windows XP. The downloads for the Intel machines went smoothly. However when I try to use the mirror site to download KWSN 2.4 for the AMD machine (SSE AMD generic) all I get is the 7zip file. I had that file allready on the AMD machine. Tried several times thinking I may have gotten a bit excited at first and made a mistake. Not so, tried again and got the same results. A 7zip file, but no optimized KWSN 2.4 file. Even my 64 bit vista machine was very easy. Thanks



OK! I downloaded the same file to a 3.5 floppy on my Intel machine and checked the contents on the same Intel machine. Your right, It's all there. I just don't know what I am not doing to get it right on the AMD machine. Sadly there is not an A drive on the AMD that I can use to transfer the files there.

Assuming your computers are networked. Can't you download AMD version to one of your Intels, unzip, and then transfer files.

Andy


I have them using the same router to broadband. I never did set up file sharing. I am not quite ready to undertake that chore yet. But after taking a break to check out the "Perseid Meteor shower" I had a few thoughts on how to try again. Thanks
ID: 618482 · Report as offensive
Previous · 1 . . . 3 · 4 · 5 · 6 · 7 · 8 · 9 · Next

Message boards : Number crunching : v5.27 (MB) live on main.


 
©2024 University of California
 
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.