Message boards :
Number crunching :
SETI on PIII 600Mhz
Message board moderation
Author | Message |
---|---|
Martin Send message Joined: 30 Jan 06 Posts: 4 Credit: 341 RAC: 0 |
|
W-K 666 Send message Joined: 18 May 99 Posts: 19406 Credit: 40,757,560 RAC: 67 |
Hi, Thats probably a time predicted by your benchmark figures, Also now we are crunching Enhanced Seti the crunch time vary considerably with the Angle_Range (AR) of the unit. So without further info no-one can say wether this is a realistic time prediction or not. See the 'Enhanced FAQ' thread at top of page for more info, and think about optimised application also in thread at top of page. |
Martin Send message Joined: 30 Jan 06 Posts: 4 Credit: 341 RAC: 0 |
|
John Clark Send message Joined: 29 Sep 99 Posts: 16515 Credit: 4,418,829 RAC: 0 |
As a sort of benchmark comparison, I am running a 700MHz P Coppermine laptop (see my Win98SE machine) for the WU stats. But, off the top of my head a 62 Cobblestone WU is done in about 15 hours. It's good to be back amongst friends and colleagues |
Richard Haselgrove Send message Joined: 4 Jul 99 Posts: 14679 Credit: 200,643,578 RAC: 874 |
And my 350MHz PII takes about 38 hours.... These 62 credit WUs are the commonest, but of course you won't know what credit you're going to be awarded until it finishes! You could check out whether any of the other three computers crunching the same WU have reported yet, and see what credit they've claimed (but there are still some old versions of BOINC out there which don't claim the same credit as current versions): or you can get a rough idea from the deadline assigned by Berkeley. 62 credits means a deadline of about 25 days - plenty of time for your PIII to finish if you allow it to run for at least a couple of hours a day on average. |
Martin Send message Joined: 30 Jan 06 Posts: 4 Credit: 341 RAC: 0 |
As a sort of benchmark comparison, I am running a 700MHz P Coppermine laptop (see my Win98SE machine) for the WU stats. My computer is a laptop, too. And it's nearly the same processor (mine is 600Mhz Coppermine) but my computer needs 32h :( |
John Clark Send message Joined: 29 Sep 99 Posts: 16515 Credit: 4,418,829 RAC: 0 |
As a sort of benchmark comparison, I am running a 700MHz P Coppermine laptop (see my Win98SE machine) for the WU stats. The BOINC Manager estimates up to 35 hours on some of my new WUs, after they are downloaded. After they have actually been crunched, they report in the region of 15-17 hours. Indeed I currently have a 25 hour prediction waiting to run, and I think this will finally be completed in 11 hrs to 12 hours when it sends back the results. It's good to be back amongst friends and colleagues |
mikey Send message Joined: 17 Dec 99 Posts: 4215 Credit: 3,474,603 RAC: 0 |
As a sort of benchmark comparison, I am running a 700MHz P Coppermine laptop (see my Win98SE machine) for the WU stats. Is your laptop a Celeron? If so that is a major part of the problem, Celerons, Semprons, Durons, etc all have small L2 Caches and therefore swap the program to the harddrive while running, slowing the process down significantly. |
Martin Send message Joined: 30 Jan 06 Posts: 4 Credit: 341 RAC: 0 |
|
Richard Haselgrove Send message Joined: 4 Jul 99 Posts: 14679 Credit: 200,643,578 RAC: 874 |
The BOINC Manager estimates up to 35 hours on some of my new WUs, after they are downloaded. After they have actually been crunched, they report in the region of 15-17 hours. BOINC will slowly 'learn' how fast your machine really crunches, and the estimates will get closer to reality. May take the best part of a month, though, as the usual guideline is 20 - 30 completed WUs. |
Ingleside Send message Joined: 4 Feb 03 Posts: 1546 Credit: 15,832,022 RAC: 13 |
I'm very intrigued at one of your computers that seems to be a PIII, but appears to have 2 cpu's??? That would explain an RAC of ~200, but I didn't think the PIII's had more than 1 CPU. Love to know what it is. A single cpu having multiple Cores is fairly new then it comes to X86-cpu's, but having mainboards that can fit 2 or more cpu's is old technology. I've owned both dual-p2 and dual-p3-system. "I make so many mistakes. But then just think of all the mistakes I don't make, although I might." |
John Clark Send message Joined: 29 Sep 99 Posts: 16515 Credit: 4,418,829 RAC: 0 |
I'm very intrigued at one of your computers that seems to be a PIII, but appears to have 2 cpu's??? That would explain an RAC of ~200, but I didn't think the PIII's had more than 1 CPU. Love to know what it is. You are quite correct Chris. I have 2 dual CPU rigs ... my old one is a dual PIII Coppermine, running at 933MHz, and P3 were capable of being dualed without any special preparation other than the MoBo. My P3 dual uses a SuperMicro server board, which does not allow overclocking, etc. The only tweek I have managed is using aggressive clock timings on the memory. This gained me about 5%, and made up for some of the losses of shared memory, small L2 and shared FSB (running at 133MHz). These run to about 20% to 25%. You can see the effects give similar WU completion times to my single CPU P3, originally a 750MHz Coppermine overclocked mildly to 840MHz (100MHz FSB running at 112MHz). It's good to be back amongst friends and colleagues |
John Clark Send message Joined: 29 Sep 99 Posts: 16515 Credit: 4,418,829 RAC: 0 |
The BOINC Manager estimates up to 35 hours on some of my new WUs, after they are downloaded. After they have actually been crunched, they report in the region of 15-17 hours. This may be true, but it will still estimate well above the real crunch times, as in my case. I have been running BOINC since the start of SETI_Enhanced, and the estimates are still well above. The WU I have just completed (~30 cobblestones) was originally estimated to take 25.5 hours, before starting. The actual crunch tome, before it uploaded and corrected the result, was 15.5 hours (approximately). However, checking the reported, and corrected, crunch time shows it took just over 11 hours. It's good to be back amongst friends and colleagues |
1mp0£173 Send message Joined: 3 Apr 99 Posts: 8423 Credit: 356,897 RAC: 0 |
I'm very intrigued at one of your computers that seems to be a PIII, but appears to have 2 cpu's??? That would explain an RAC of ~200, but I didn't think the PIII's had more than 1 CPU. Love to know what it is. I've got a dual pentium-pro in my "boneyard." |
OzzFan Send message Joined: 9 Apr 02 Posts: 15691 Credit: 84,761,841 RAC: 28 |
I'm very intrigued at one of your computers that seems to be a PIII, but appears to have 2 cpu's??? That would explain an RAC of ~200, but I didn't think the PIII's had more than 1 CPU. Love to know what it is. Dual Pentium Pro 200 upgraded to the Pentium II 333 "Overdrive" with 512MB RAM running Windows NT 4.0 server (down due to power cost restrictions). My current file and print server is a dual Pentium III 700MHz (thinking about spending a little money and going up to dual 850s which can be had off eBay for about $40 each) with 1GB RAM and 3 HDDs (10GB system drive, 120GB data drive and 300GB media drive - needing a 750GB badly!). Many other older "dualies" that I want to get to complete my museum, if costs weren't so prohibitive. |
KD [SETI.USA] Send message Joined: 24 Oct 99 Posts: 460 Credit: 2,513,131 RAC: 0 |
You are quite correct Chris. They were uncommonly common. I built quite a number of dual P3's back between '99 and '00 -- for myself, friends, family, co-workers.. Slot1's and later 370's. I also leaned towards Supermicro m/b's as well. Supermicro, along with Asus, were one of the only board manufacturers that gave you not only duals, onboard SCSI, but (at the time) more importantly AGP. Most of the "server boards" then didn't have AGP. As others have said, you can find them today on Ebay for next to nothing. Even populated with dual 1Ghz (370) P3's and 1GB ECC, I've seen them for $50. They are great today for home LAN server type stuff. They will web, email, word process, etc, just as fast as anything new. ...and, of course, crunch SETI. Remembering back here... With the Supermicro SL1 boards, look for the voltage controller IC. If it ends in "BCB", you can run 1Ghz Coppermines -- otherwise you are limited to Katmai's up to, if I remember right, 700Mhz. |
1mp0£173 Send message Joined: 3 Apr 99 Posts: 8423 Credit: 356,897 RAC: 0 |
My Dual P-Pro has been replaced with an 800 MHz Via C3 -- it's under 50w. |
miketoth1001 Send message Joined: 18 May 99 Posts: 2 Credit: 81,048 RAC: 0 |
I also leaned towards Supermicro m/b's as well. Supermicro, along with Asus, were one of the only board manufacturers that gave you not only duals, onboard SCSI, but (at the time) more importantly AGP. Most of the "server boards" then didn't have AGP. I have an older Gigabyte GA-6BXDS http://www.gigabyte.com.tw/Support/Motherboard/Manual_Model.aspx?ProductID=1474 It tops out at 600-MHz, with the last BIOS update. Dual CPUs, SCSI, RAIDport AND AGP port. I've had it for quite a while, and it's never even hiccupped once. Yeah. BOINC, and SETI, might be a bit slow, but it's reliable. |
nairb Send message Joined: 18 Mar 03 Posts: 201 Credit: 5,447,501 RAC: 5 |
I also like the dual m/b. I have several of the supermicro dual xeon boards. They only take a max 700mhz xeons but take cheap ram, old hard disks and have never crashed. The 700's take between 5 & 16 hrs to do a wu. Dead cheap off ebay too. |
tekwyzrd Send message Joined: 21 Nov 01 Posts: 767 Credit: 30,009 RAC: 0 |
I have a Supermicro P6DBE I plan to put back into operation in a computer for my mother. I paid about $174 for it when I bought it new in 1999. I've seen them on eBay for approx. $16 (used). It was a very dependable board for windows but led to some problems with SuSE. Overall Supermicro boards are a good choice. Just watch out for the leaking capacitors that commonly plagued boards produced around 2000 - 2002. I have a newer Supermicro board (PIIIDM3) that has a bit dielectric on a few caps next to one of the slots that won't recognize the presence of CPU0. The problem occurred after rumming my 700MHz p3s @ 933MHz non-stop for approx. six months. Maybe one of these days I'll scrounge up some caps to fix it. It was fast compared to most P3s due to it's use of interleaved (dual channel) memory. Nothing travels faster than the speed of light with the possible exception of bad news, which obeys its own special laws. Douglas Adams (1952 - 2001) |
©2024 University of California
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.