Posts by dskagcommunity


log in
1) Message boards : Number crunching : New AstroPulse for GPU ( ATi & NV) released (r1316) (Message 1267055)
Posted 748 days ago by Profile dskagcommunity
Hm ok good to know.
2) Message boards : Number crunching : New AstroPulse for GPU ( ATi & NV) released (r1316) (Message 1267034)
Posted 748 days ago by Profile dskagcommunity
Do i understand that right? You use an AGP 4xxx Card? I think that i read anywhere that the AGP versions of the 4xxx cards dont run on OpenCL or something (but yes it will report as OpenCL device). But thats a long time ago, dont know where i read that. (wanted to buy an aditional AGP 4xxxx card before put some AGP machines in trash at this point and looked on the web how it run).

Or does anyone here run a AGP 4xxx Card with validated Results to correct that?

I will run some more AP on the 4350 (when i get a new task ^^) because Raistmer wrote 1 tasks is not that representaive. But your right, the usage of cpu was damn high i saw now O.o This card only has 96Gflops what is vverrrryyy low so i dont know how much the GPU or the CPU trotteling eatch other because the CPU is a "greenIT" CPU with the power of i think only a P4 3,6Ghz (but i will look next task with GPUz and Taskmanager how much it needs the components). I just have bad experience with 12.x drivers and cos its my fileserver i dont try to update the catalyst, im aware of a hard to remove Bluescreen on startup again ^^ And dont have any computer left to try it there :/
3) Message boards : Number crunching : New AstroPulse for GPU ( ATi & NV) released (r1316) (Message 1266716)
Posted 749 days ago by Profile dskagcommunity
Only as Info, Application runs without errors on a low low lowest end HD4350 ^^ ~24h for 1 WU
4) Message boards : News : Network routing problems have been fixed (Message 1165044)
Posted 1032 days ago by Profile dskagcommunity
Cache filled since days, all working, thx guxs! :)
5) Message boards : Number crunching : OT The Original LHCA@HOME Has Moved (Message 1163257)
Posted 1039 days ago by Profile dskagcommunity
Thx for this Info.
6) Message boards : Number crunching : http://boinc.berkeley.edu/download.php (Message 1161543)
Posted 1044 days ago by Profile dskagcommunity
Ups sry fall asleep ^^ Here we go:

http://www.dskag.at/data/Research/boinc_6.10.58_windows_intelx86.exe

http://www.dskag.at/data/Research/boinc_6.10.60_windows_intelx86.exe
7) Message boards : Number crunching : http://boinc.berkeley.edu/download.php (Message 1161513)
Posted 1044 days ago by Profile dskagcommunity
Do you need 6.10.58 or 6.10.60? I could load it on a webserver for temporary Download when ya want.
8) Message boards : News : Fall Funding Drive (Message 1160844)
Posted 1046 days ago by Profile dskagcommunity
uhm i did a minidonation two days ago, plz use it for that drive ^^
9) Message boards : Number crunching : Призраки?... (Message 1160598)
Posted 1047 days ago by Profile dskagcommunity
How about English?
10) Message boards : Number crunching : What amount of cache (Message 1160536)
Posted 1047 days ago by Profile dskagcommunity
Yes i crunch Einstein too (but not 10 days cache (only for seti) cos running on a machine with 9GB/month HSDPA/UMTS Mobile Stick AND Seti too ^^), it is the one with the biggest need :) 64Tasks need round 3GB....Öhm ups..ok then one machine using more then 1,2GB ^^ *G* I forgot :)
11) Message boards : Number crunching : Umm, how about LONGER TASKS???? (Message 1160535)
Posted 1047 days ago by Profile dskagcommunity
It takes 6 minutes to crunch a SETI task on my beater box 9800 GT system. It only takes a couple minutes to crunch on my main systems.



Do you get only shortys? I get Seti WUs from 7 - 45 Minutes Duration on my 9800GTX machines. So there are often enough bigger ones ^^
12) Message boards : Number crunching : What amount of cache (Message 1160183)
Posted 1048 days ago by Profile dskagcommunity
I give BOINC on every Machine 10GB. More then 1,2GB i never needed on any machine.

10GB? do you notice any difference in given that amout of disc?


Not really, i wrote down i never needed more then 1,2Gb ;)

Only have extra HDs in every PC for C: what are nearly empty cos the big HD Sizes of the last 10 Years .. ^^
13) Message boards : Number crunching : No GPU WU's (Message 1160176)
Posted 1048 days ago by Profile dskagcommunity
AHH all works :) thx *GGG*

Edit: Unfortune it "kills" the whole machine (fileserver) so absolute no performance is left, had to stop it :(

Then put in some reduced commandline parameter's so host is usable, (and don't use the High Priority switch), like:

<cmdline>-instances_per_device 1 -unroll 6 -ffa_block 4096 -ffa_block_fetch 2048</cmdline>

Claggy


Ah thx works now @ full Network speed again, only little Video chunknees every ~10 Minutes, so i changed BOINC Config to compute only between 0:30 and 20:30 so i have the TV primetime free for lagfree MediaPC Connectivity.
14) Message boards : Number crunching : What amount of cache (Message 1159845)
Posted 1049 days ago by Profile dskagcommunity
I give BOINC on every Machine 10GB. More then 1,2GB i never needed on any machine.
15) Message boards : Number crunching : HOW do I set up 2nd computer for prefs (Message 1159843)
Posted 1049 days ago by Profile dskagcommunity

How do I do that , ?
Set one up as school ?


Yes i do so too. If you dont have 10 machines with 10 different needed settings it works fine so :)
16) Message boards : Number crunching : No GPU WU's (Message 1159836)
Posted 1049 days ago by Profile dskagcommunity
AHH all works :) thx *GGG*

Edit: Unfortune it "kills" the whole machine (fileserver) so absolute no performance is left, had to stop it :(
17) Message boards : Number crunching : No GPU WU's (Message 1159783)
Posted 1049 days ago by Profile dskagcommunity
Hm should Astropulse ATI lunactrics(?) Apps work now too?
Because i installed it now on a server with a low end 4350 (BOINC Soft recognizing it) and get only the no work message (app_info seems to work got no error about it). So i dont know if it is now an config error or still a Seti error. Profil is set to accept other applications.

<app_info>
<app>
<name>astropulse_v505</name>
</app>
<file_info>
<name>ap_5.06_win_x86_SSE2_OpenCL_ATI_r521.exe</name>
<executable/>
</file_info>
<file_info>
<name>AstroPulse_Kernels_r521.cl</name>
<executable/>
</file_info>
<app_version>
<app_name>astropulse_v505</app_name>
<version_num>505</version_num>
<platform>windows_intelx86</platform>
<avg_ncpus>0.04</avg_ncpus>
<max_ncpus>0.20</max_ncpus>
<plan_class>cuda</plan_class>
<cmdline>-instances_per_device 1 -hp -unroll 10</cmdline>
<flops>30987654321</flops>
<file_ref>
<file_name>ap_5.06_win_x86_SSE2_OpenCL_ATI_r521.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>AstroPulse_Kernels_r521.cl</file_name>
<copy_file/>
</file_ref>
<coproc>
<type>ATI</type>
<count>1</count>
</coproc>
</app_version>
</app_info>
18) Message boards : Number crunching : porblems with 6.08 on NVIDIA GeForce 310M (Message 1159756)
Posted 1049 days ago by Profile dskagcommunity
Oh i dont ment overload i ment overheat ^^
19) Message boards : Number crunching : porblems with 6.08 on NVIDIA GeForce 310M (Message 1159746)
Posted 1049 days ago by Profile dskagcommunity
Did you are new to seti with this GPU? 310M? is it a laptop? Perhaps it overheats? Try to use GPUz to analyse GPU Temp while computing.
20) Message boards : Number crunching : Happy happy joy joy. Upload/download success (Message 1157941)
Posted 1055 days ago by Profile dskagcommunity
I was today visiting my unattended seti system and its still clear/crunching its cache, Upload and reporting worked. But got no new work. Dont know if it is a boinc failure or seti error cos i have some backup einstein tasks (only round 40) in the 10 days cache. So there must be plenty of room for new Seti WUs. We will see the next days. Only have <1GB free Traffic (HSDPA/UMTS Stick) left on this machine so cant get more Einstein units for backup until 8 of Oct, hope it does not run out of work fully :/


Next 20

Copyright © 2014 University of California