Posts by Helli


log in
21) Message boards : Number crunching : Lunatics Windows Installer v0.38 release notes (Message 1117832)
Posted 1142 days ago by Profile Helli
Thanks Claggy and Miep for your fast reply.

That means for me it's not really necessary to switch now. Actually i have no problems with my both
Cuda Rigs, neither with downclocking or anything else. Because my Graphic Cards are only Co-Processor
Cards here ;-) , there is no need for me to upgrade my Graphic Card Driver.

Helli
22) Message boards : Number crunching : Lunatics Windows Installer v0.38 release notes (Message 1117812)
Posted 1142 days ago by Profile Helli
Many Information...

May i ask a question, neverless? Is there a reason why i should update my CUDA App x32f to x38g_cuda32?


Helli
23) Message boards : Number crunching : GTX 590's are out. (Message 1116175)
Posted 1146 days ago by Profile Helli
Ok, i have now a few Values more:


WUs GPU Load Mem Contr Load Mem Used WU Time

4 89% 43% 675 MB 880 Sec.
6 94% 43% 904 MB 1230 Sec.
8 95% 45% 1216 MB 1610 Sec.


...



A few values with overclocked GTX590 (i do 8 at a time)
normal values for Shader/Mem are 607/854:



WUs GPU Load Mem Contr Load Mem Used WU Time Overclocked
(Shader/Mem)
8 98% 48% 1216 MB 1495 Sec. 650/875
8 98% 50% 1216 MB 1435 Sec. 668/908




Helli


Hey Helli:

Why do 8 tasks on the 590 instead of 9?



Hi,

i have tried 10 Workunits per GTX590 (5 per GPU) but the times were 30% higher (1930 sec. per WU).
Memory usage was 1490MB per GPU (GPU Load 99%, Mem Contr Load 55%) .

Helli
24) Message boards : Number crunching : Is there any benefit to installing lunatics if 1 WU per GPU is ran? (Message 1112982)
Posted 1154 days ago by Profile Helli
Is there any benefit to installing and running lunatics if a person decides not to run two WU’s per GPU?
....



The only other Advantage of the Lunatics GPU-App is that you produce less Results with the -12 Error. With
less Error you can donload often more Workunits because your DL Limit will reset to 100/Day in a larger way.

There is no considerable Speed improvement - imho.

Helli
25) Message boards : Number crunching : Panic Mode On (47) Server problems? (Message 1112676)
Posted 1155 days ago by Profile Helli
For those who haven't got it bookmarked yet, here's a live view of the Cricket Graph.



Where's the duck? ;)


Yup, it's time for Richard's Rubber Ducky. :D

May i post the Link, Richard?



Helli
26) Message boards : Number crunching : Cpu's are irrevelent to cuda crunchers? (Message 1111612)
Posted 1158 days ago by Profile Helli
okay, you're building the ultimate cuda cruncher.
does it even matter what cpu you put in the box?


For me? Yes! As long as the Mainboard has enough PCI-E Slots. :D

Helli
27) Message boards : Number crunching : Nvidia 275.27 issues still (Message 1111609)
Posted 1158 days ago by Profile Helli
Keep in mind that 275.27 are Betas - anything is possible with those Drivers...

Helli
28) Message boards : Number crunching : GTX 590's are out. (Message 1106502)
Posted 1174 days ago by Profile Helli
Ok, i have now a few Values more:


WUs GPU Load Mem Contr Load Mem Used WU Time

4 89% 43% 675 MB 880 Sec.
6 94% 43% 904 MB 1230 Sec.
8 95% 45% 1216 MB 1610 Sec.


...



A few values with overclocked GTX590 (i do 8 at a time)
normal values for Shader/Mem are 607/854:



WUs GPU Load Mem Contr Load Mem Used WU Time Overclocked
(Shader/Mem)
8 98% 48% 1216 MB 1495 Sec. 650/875
8 98% 50% 1216 MB 1435 Sec. 668/908




Helli
29) Message boards : Number crunching : Panic Mode On (46) Server problems (Message 1106496)
Posted 1174 days ago by Profile Helli
WORKING



Thanks for the Info! :-)

15.05.2011 19:19:02 SETI@home Reporting 111 completed tasks, not requesting new tasks


Helli
30) Message boards : Number crunching : CLOSED- SETI/BOINC Milestones [ v2.0 ] - XXII -CLOSED (Message 1106402)
Posted 1174 days ago by Profile Helli
300,000th post in this Forum.





May i post a Screenie - for archiving reason, uli? :-)

Helli
31) Message boards : Number crunching : GTX 460 (Message 1101002)
Posted 1192 days ago by Profile Helli
Need some help.
Installed a GeForce GTX460 on Dual core machine and changed the xml file to run 2 WU concurrently. Yesterday, started monitoring the temperature and it nVidia temp. monitor was showing 85 degrees C for the GPU. Thought it was too high so removed a single side panel of the cabinet and the temp dropped by just 5 degress.
Read through this thread...
I have a 600W smps (coolermaster) so apart from getting a water cooled cabinet is there a way to reduce the temperature?

Thnx.
P.S - Its summer around here and the ambient temperature is around 30-35 degrees C.and the PC runs 24x7




Don't worry. 85C for an ambient temperature of 30-35C is fine. Several
GPUs here are over 85C without any Problem.

In the past i had a few Results with Errors if the Temp goes over 95C.

Helli
32) Message boards : Number crunching : Cmd line to suspend (Message 1100202)
Posted 1195 days ago by Profile Helli
Have you tried both <exclusive_....> Tags in cc_config.xml to stop crunching with the GPUs or CPUs or both
if you start an specific Application like a Game?

<exclusive_app>filename.exe</exclusive_app>
BOINC will suspend computing whenever the executable is running (e.g., a game).
Case is ignored in filenames. Multiple applications can be specified.


<exclusive_gpu_app>important.exe</exclusive_gpu_app>
BOINC will suspend use of GPUs whenever the executable is running.


cc_config options

Helli
33) Message boards : Number crunching : GTX 590's are out. (Message 1099372)
Posted 1198 days ago by Profile Helli
Ok, i have now a few Values more:


WUs GPU Load Mem Contr Load Mem Used WU Time

4 89% 43% 675 MB 880 Sec.
6 94% 43% 904 MB 1230 Sec.
8 95% 45% 1216 MB 1610 Sec.



Power Draw and Temperature have not changed with the different Setups. 330 Watt with 83°C.

I would say, one GTX590 can do the work of two GTX295 with 1.5x times the Power Draw of a GTX295. :-)
The GTX590 are very hot, so i'm not sure if it's possible to run more than one Card with no room
between each other. Maybe only watercooled...

Helli
34) Message boards : Number crunching : GTX 590's are out. (Message 1099155)
Posted 1199 days ago by Profile Helli
@dan

actually i have not testet 2 per GPU, but will do. Both GPUs running at 80-84°C (84% Fan Speed)
with 3 Workunits per GPU and an ambient Temp of 31°C.

@JohnDK

Can't say anything about Noise. Running an air cooled 4x GTX295 Rig in the same Room makes a looot of Noise. :D

Helli
35) Message boards : Number crunching : GTX 590's are out. (Message 1099148)
Posted 1199 days ago by Profile Helli
Do you mean 4 per Card? Two per GPU?

Tomorrow i will test 4 per GPU, 8 per Card because the Card has 2x 1536MB Memory and
with three Workunits only 942 MB are used. The GPU Load with 3 Workunits is about 92-95%.
Maybe a little Room for another Workunit? :D

Helli
36) Message boards : Number crunching : GTX 590's are out. (Message 1099128)
Posted 1199 days ago by Profile Helli
Well, i'm running now my first GTX590. :-)

Doing three Workunits at a time per GPU. So 6 at a time.
This not overclocked MSI GTX590 needs 20 min for 6 mid range Workunits.
Power Draw for the GTX590 alone is about 330-335 Watt, the whole System 635 Watt.

Helli
37) Message boards : Number crunching : Incompatibility of Lunatics CUDA x32f with new 270.61 driver ... (Message 1099124)
Posted 1199 days ago by Profile Helli
On my QuadroFX 570M (256MB) system the Lunatics x32f application does not work properly with new 270.61 drivers.

....



What's the reason you think you have a driver Problem?

I can only see one error result on your Rig and that's a global Exit status 1 error.

Helli
38) Message boards : Number crunching : I Thought BOINC Was Crazy But... (Message 1091187)
Posted 1222 days ago by Profile Helli
That's a very fine explanation, $o |>0/|/3. :-)


Helli
39) Message boards : Cafe SETI : Mystery Photo Game 13 (Message 1090980)
Posted 1223 days ago by Profile Helli
I know about two Structures who look like this. Towers and
Wind Turbines. The neighborhood looks not like the right
Place for a Televison Tower, so i think it's the construction
of a Wind Turbine.

Helli
40) Message boards : Cafe SETI : Mystery Photo Game 13 (Message 1090937)
Posted 1223 days ago by Profile Helli
Looks like this was to easy again. ;-)

Yes, you are right. :-)

PM on it's way.

Helli


Previous 20 · Next 20

Copyright © 2014 University of California