Posts by dcappello


log in
1) Message boards : Number crunching : It is official! 15th Seti Anni Shirts are a go. (Message 1525417)
Posted 76 days ago by Profile dcappello
I have a home for one.....
2) Message boards : Number crunching : 15th Anni T-shirt discussions (Message 1451169)
Posted 258 days ago by Profile dcappello
If my math is correct (I am frozen in here in Dallas hasn't been over 25F all day) I'll take one.

3) Message boards : Number crunching : CLOSED - SETI/BOINC Milestones [ v2.0 ] - XXVI - CLOSED (Message 1451160)
Posted 258 days ago by Profile dcappello
Congrats!!!
4) Message boards : Number crunching : Tons of Invalid Results (Message 1401262)
Posted 377 days ago by Profile dcappello
So I stepped away from the console with much frustration - but about a month later I am back

All drivers up to date etc.
I reset and detached from SETI
deleted the BOINC data folder
rebooted
re-installed BOINC
re-attahced to SETI project

Still blowing out work units - show all running for 01:55:49
and early reports show results are invalid...

I am about to toss in the towel - anybody have ANY last suggestions?


5) Message boards : Number crunching : Ooops.....sorry, wingys. (Message 1389636)
Posted 407 days ago by Profile dcappello
At least your rig is working and crunching away! I am sure I have more than a few angry wingmen out there....
6) Message boards : Number crunching : Tons of Invalid Results (Message 1388138)
Posted 412 days ago by Profile dcappello
Corrects to my last update.

So after I watched the GPU for a bit - it stared blowing right thru them.
Swapped out the GTX460 1G for the GTX460 768 and observed the same behavior.
(now at a total loss) (2 cards bad?)

As it stands now - I replaced BOTH cards with a brand new 550TI I had laying around.
Have not seen a GPU task yet for that card. Will keep my eye on it.

(and it is well cleaned out - dust be gone)
7) Message boards : Number crunching : Tons of Invalid Results (Message 1388114)
Posted 412 days ago by Profile dcappello
Here is an update:

I updated BIOS - no go - after update and sanity check on settings (basically stock) still
blowing out GPU work units.

Popped the side panel off and ripped out the 2nd 460 (it was the 768 card) left the 1G card
there. This seems to have stopped blowing GPU work units - at this point perhaps it is a
bad 460? I have a GTX 550 TI NIB that I could swap this 460 out with - have to do
some research but I think the 550TI has an edge on the 460...

As for the dust balls - not to bad on the inside:


I'll let this run for a day and perhaps all ya all can help me check the work units ?
Thanks again for the tips etc.
8) Message boards : Number crunching : Tons of Invalid Results (Message 1387916)
Posted 413 days ago by Profile dcappello
The mobo is a Asus P6T-SE and it is 1 rev out on BIOS - which am going to update. The PSU is
a Corsair HX650 I'll check that when I crack it open. In case you were all wondering
what "seasnake" looks like (in the coolermaster case):
9) Message boards : Number crunching : Tons of Invalid Results (Message 1387502)
Posted 414 days ago by Profile dcappello
This is all good stuff!!! So I double checked the sensors - nothing out of the ordinary there.

For reference here is the info on the other card (and also next to the original post/card)



One thing I didn't do on the driver install is I left off the "Nvidia experience"
So I went back again re-installed drivers WITH that option.

If that doesn't work I"ll pull the 768 card and see if it runs with one.

thanks for all the tips and info. :)
10) Message boards : Number crunching : Tons of Invalid Results (Message 1387446)
Posted 414 days ago by Profile dcappello
No sooner than I posted, I now see I am getting some feed back from the server
"Your App_info.xml file doesn't have a usable version of SETI@home v7."

How is this even possible - I did a fresh install of both the apps (BOINC and Lunatics) ?



Here are the contents of my app-info:



<app_info>
<app>
<name>setiathome_v7</name>
</app>
<file_info>
<name>AKv8c_Bb_r1846_winx86_SSSE3x.exe</name>
<executable/>
</file_info>
<file_info>
<name>libfftw3f-3.dll</name>
<executable/>
</file_info>
<file_info>
<name>AKv8c_Bb_r1846_winx86_SSSE3x.txt</name>
</file_info>
<app_version>
<app_name>setiathome_v7</app_name>
<version_num>700</version_num>
<platform>windows_intelx86</platform>
<file_ref>
<file_name>AKv8c_Bb_r1846_winx86_SSSE3x.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>libfftw3f-3.dll</file_name>
</file_ref>
<file_ref>
<file_name>AKv8c_Bb_r1846_winx86_SSSE3x.txt</file_name>
<open_name>mb_cmdline.txt</open_name>
</file_ref>
</app_version>
<app_version>
<app_name>setiathome_v7</app_name>
<version_num>700</version_num>
<platform>windows_x86_64</platform>
<file_ref>
<file_name>AKv8c_Bb_r1846_winx86_SSSE3x.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>libfftw3f-3.dll</file_name>
</file_ref>
<file_ref>
<file_name>AKv8c_Bb_r1846_winx86_SSSE3x.txt</file_name>
<open_name>mb_cmdline.txt</open_name>
</file_ref>
</app_version>
<app>
<name>setiathome_enhanced</name>
</app>
<file_info>
<name>AKv8c_Bb_r1846_winx86_SSSE3x.exe</name>
<executable/>
</file_info>
<file_info>
<name>libfftw3f-3.dll</name>
<executable/>
</file_info>
<file_info>
<name>AKv8c_Bb_r1846_winx86_SSSE3x.txt</name>
</file_info>
<app_version>
<app_name>setiathome_enhanced</app_name>
<version_num>603</version_num>
<platform>windows_intelx86</platform>
<file_ref>
<file_name>AKv8c_Bb_r1846_winx86_SSSE3x.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>libfftw3f-3.dll</file_name>
</file_ref>
<file_ref>
<file_name>AKv8c_Bb_r1846_winx86_SSSE3x.txt</file_name>
<open_name>mb_cmdline.txt</open_name>
</file_ref>
</app_version>
<app_version>
<app_name>setiathome_enhanced</app_name>
<version_num>603</version_num>
<platform>windows_x86_64</platform>
<file_ref>
<file_name>AKv8c_Bb_r1846_winx86_SSSE3x.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>libfftw3f-3.dll</file_name>
</file_ref>
<file_ref>
<file_name>AKv8c_Bb_r1846_winx86_SSSE3x.txt</file_name>
<open_name>mb_cmdline.txt</open_name>
</file_ref>
</app_version>
<app>
<name>astropulse_v6</name>
</app>
<file_info>
<name>AP6_win_x86_SSE2_OpenCL_NV_r1843.exe</name>
<executable/>
</file_info>
<file_info>
<name>libfftw3f-3.dll</name>
<executable/>
</file_info>
<file_info>
<name>ap_cmdline_win_x86_SSE2_OpenCL_NV.txt</name>
</file_info>
<file_info>
<name>AstroPulse_Kernels_r1843.cl</name>
</file_info>
<app_version>
<app_name>astropulse_v6</app_name>
<version_num>604</version_num>
<platform>windows_intelx86</platform>
<avg_ncpus>0.04</avg_ncpus>
<max_ncpus>0.2</max_ncpus>
<plan_class>cuda_opencl_100</plan_class>
<cmdline></cmdline>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>AP6_win_x86_SSE2_OpenCL_NV_r1843.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>libfftw3f-3.dll</file_name>
</file_ref>
<file_ref>
<file_name>ap_cmdline_win_x86_SSE2_OpenCL_NV.txt</file_name>
<open_name>ap_cmdline.txt</open_name>
</file_ref>
<file_ref>
<file_name>AstroPulse_Kernels_r1843.cl</file_name>
</file_ref>
</app_version>
<app_version>
<app_name>astropulse_v6</app_name>
<version_num>604</version_num>
<platform>windows_intelx86</platform>
<avg_ncpus>0.04</avg_ncpus>
<max_ncpus>0.2</max_ncpus>
<plan_class>opencl_nvidia_100</plan_class>
<cmdline></cmdline>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>AP6_win_x86_SSE2_OpenCL_NV_r1843.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>libfftw3f-3.dll</file_name>
</file_ref>
<file_ref>
<file_name>ap_cmdline_win_x86_SSE2_OpenCL_NV.txt</file_name>
<open_name>ap_cmdline.txt</open_name>
</file_ref>
<file_ref>
<file_name>AstroPulse_Kernels_r1843.cl</file_name>
</file_ref>
</app_version>
<app_version>
<app_name>astropulse_v6</app_name>
<version_num>604</version_num>
<platform>windows_x86_64</platform>
<avg_ncpus>0.04</avg_ncpus>
<max_ncpus>0.2</max_ncpus>
<plan_class>cuda_opencl_100</plan_class>
<cmdline></cmdline>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>AP6_win_x86_SSE2_OpenCL_NV_r1843.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>libfftw3f-3.dll</file_name>
</file_ref>
<file_ref>
<file_name>ap_cmdline_win_x86_SSE2_OpenCL_NV.txt</file_name>
<open_name>ap_cmdline.txt</open_name>
</file_ref>
<file_ref>
<file_name>AstroPulse_Kernels_r1843.cl</file_name>
</file_ref>
</app_version>
<app_version>
<app_name>astropulse_v6</app_name>
<version_num>604</version_num>
<platform>windows_x86_64</platform>
<avg_ncpus>0.04</avg_ncpus>
<max_ncpus>0.2</max_ncpus>
<plan_class>opencl_nvidia_100</plan_class>
<cmdline></cmdline>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>AP6_win_x86_SSE2_OpenCL_NV_r1843.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>libfftw3f-3.dll</file_name>
</file_ref>
<file_ref>
<file_name>ap_cmdline_win_x86_SSE2_OpenCL_NV.txt</file_name>
<open_name>ap_cmdline.txt</open_name>
</file_ref>
<file_ref>
<file_name>AstroPulse_Kernels_r1843.cl</file_name>
</file_ref>
</app_version>
<app>
<name>astropulse_v6</name>
</app>
<file_info>
<name>AP6_win_x86_SSE_CPU_r1797.exe</name>
<executable/>
</file_info>
<file_info>
<name>libfftw3f-3.dll</name>
<executable/>
</file_info>
<file_info>
<name>ap_cmdline_win_x86_SSE_CPU.txt</name>
</file_info>
<app_version>
<app_name>astropulse_v6</app_name>
<version_num>601</version_num>
<platform>windows_intelx86</platform>
<cmdline></cmdline>
<file_ref>
<file_name>AP6_win_x86_SSE_CPU_r1797.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>libfftw3f-3.dll</file_name>
</file_ref>
<file_ref>
<file_name>ap_cmdline_win_x86_SSE_CPU.txt</file_name>
<open_name>ap_cmdline.txt</open_name>
</file_ref>
</app_version>
<app_version>
<app_name>astropulse_v6</app_name>
<version_num>601</version_num>
<platform>windows_x86_64</platform>
<cmdline></cmdline>
<file_ref>
<file_name>AP6_win_x86_SSE_CPU_r1797.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>libfftw3f-3.dll</file_name>
</file_ref>
<file_ref>
<file_name>ap_cmdline_win_x86_SSE_CPU.txt</file_name>
<open_name>ap_cmdline.txt</open_name>
</file_ref>
</app_version>
<app>
<name>setiathome_v7</name>
</app>
<file_info>
<name>Lunatics_x41zc_win32_cuda42.exe</name>
<executable/>
</file_info>
<file_info>
<name>cudart32_42_9.dll</name>
<executable/>
</file_info>
<file_info>
<name>cufft32_42_9.dll</name>
<executable/>
</file_info>
<file_info>
<name>mbcuda.cfg</name>
</file_info>
<app_version>
<app_name>setiathome_v7</app_name>
<version_num>700</version_num>
<platform>windows_intelx86</platform>
<plan_class>cuda42</plan_class>
<avg_ncpus>0.040000</avg_ncpus>
<max_ncpus>0.040000</max_ncpus>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>Lunatics_x41zc_win32_cuda42.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>cudart32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>cufft32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>mbcuda.cfg</file_name>
</file_ref>
</app_version>
<app_version>
<app_name>setiathome_v7</app_name>
<version_num>700</version_num>
<platform>windows_intelx86</platform>
<plan_class>cuda22</plan_class>
<avg_ncpus>0.040000</avg_ncpus>
<max_ncpus>0.040000</max_ncpus>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>Lunatics_x41zc_win32_cuda42.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>cudart32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>cufft32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>mbcuda.cfg</file_name>
</file_ref>
</app_version>
<app_version>
<app_name>setiathome_v7</app_name>
<version_num>700</version_num>
<platform>windows_intelx86</platform>
<plan_class>cuda23</plan_class>
<avg_ncpus>0.040000</avg_ncpus>
<max_ncpus>0.040000</max_ncpus>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>Lunatics_x41zc_win32_cuda42.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>cudart32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>cufft32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>mbcuda.cfg</file_name>
</file_ref>
</app_version>
<app_version>
<app_name>setiathome_v7</app_name>
<version_num>700</version_num>
<platform>windows_intelx86</platform>
<plan_class>cuda32</plan_class>
<avg_ncpus>0.040000</avg_ncpus>
<max_ncpus>0.040000</max_ncpus>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>Lunatics_x41zc_win32_cuda42.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>cudart32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>cufft32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>mbcuda.cfg</file_name>
</file_ref>
</app_version>
<app_version>
<app_name>setiathome_v7</app_name>
<version_num>700</version_num>
<platform>windows_intelx86</platform>
<plan_class>cuda50</plan_class>
<avg_ncpus>0.040000</avg_ncpus>
<max_ncpus>0.040000</max_ncpus>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>Lunatics_x41zc_win32_cuda42.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>cudart32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>cufft32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>mbcuda.cfg</file_name>
</file_ref>
</app_version>
<app_version>
<app_name>setiathome_v7</app_name>
<version_num>700</version_num>
<platform>windows_x86_64</platform>
<plan_class>cuda42</plan_class>
<avg_ncpus>0.040000</avg_ncpus>
<max_ncpus>0.040000</max_ncpus>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>Lunatics_x41zc_win32_cuda42.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>cudart32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>cufft32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>mbcuda.cfg</file_name>
</file_ref>
</app_version>
<app_version>
<app_name>setiathome_v7</app_name>
<version_num>700</version_num>
<platform>windows_x86_64</platform>
<plan_class>cuda22</plan_class>
<avg_ncpus>0.040000</avg_ncpus>
<max_ncpus>0.040000</max_ncpus>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>Lunatics_x41zc_win32_cuda42.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>cudart32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>cufft32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>mbcuda.cfg</file_name>
</file_ref>
</app_version>
<app_version>
<app_name>setiathome_v7</app_name>
<version_num>700</version_num>
<platform>windows_x86_64</platform>
<plan_class>cuda23</plan_class>
<avg_ncpus>0.040000</avg_ncpus>
<max_ncpus>0.040000</max_ncpus>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>Lunatics_x41zc_win32_cuda42.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>cudart32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>cufft32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>mbcuda.cfg</file_name>
</file_ref>
</app_version>
<app_version>
<app_name>setiathome_v7</app_name>
<version_num>700</version_num>
<platform>windows_x86_64</platform>
<plan_class>cuda32</plan_class>
<avg_ncpus>0.040000</avg_ncpus>
<max_ncpus>0.040000</max_ncpus>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>Lunatics_x41zc_win32_cuda42.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>cudart32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>cufft32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>mbcuda.cfg</file_name>
</file_ref>
</app_version>
<app_version>
<app_name>setiathome_v7</app_name>
<version_num>700</version_num>
<platform>windows_x86_64</platform>
<plan_class>cuda50</plan_class>
<avg_ncpus>0.040000</avg_ncpus>
<max_ncpus>0.040000</max_ncpus>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>Lunatics_x41zc_win32_cuda42.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>cudart32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>cufft32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>mbcuda.cfg</file_name>
</file_ref>
</app_version>
<app>
<name>setiathome_enhanced</name>
</app>
<file_info>
<name>Lunatics_x41zc_win32_cuda42.exe</name>
<executable/>
</file_info>
<file_info>
<name>cudart32_42_9.dll</name>
<executable/>
</file_info>
<file_info>
<name>cufft32_42_9.dll</name>
<executable/>
</file_info>
<file_info>
<name>mbcuda.cfg</name>
</file_info>
<app_version>
<app_name>setiathome_enhanced</app_name>
<version_num>610</version_num>
<platform>windows_intelx86</platform>
<plan_class>cuda_fermi</plan_class>
<avg_ncpus>0.040000</avg_ncpus>
<max_ncpus>0.040000</max_ncpus>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>Lunatics_x41zc_win32_cuda42.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>cudart32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>cufft32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>mbcuda.cfg</file_name>
</file_ref>
</app_version>
<app_version>
<app_name>setiathome_enhanced</app_name>
<version_num>609</version_num>
<platform>windows_intelx86</platform>
<plan_class>cuda23</plan_class>
<avg_ncpus>0.040000</avg_ncpus>
<max_ncpus>0.040000</max_ncpus>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>Lunatics_x41zc_win32_cuda42.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>cudart32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>cufft32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>mbcuda.cfg</file_name>
</file_ref>
</app_version>
<app_version>
<app_name>setiathome_enhanced</app_name>
<version_num>608</version_num>
<platform>windows_intelx86</platform>
<plan_class>cuda</plan_class>
<avg_ncpus>0.040000</avg_ncpus>
<max_ncpus>0.040000</max_ncpus>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>Lunatics_x41zc_win32_cuda42.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>cudart32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>cufft32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>mbcuda.cfg</file_name>
</file_ref>
</app_version>
<app_version>
<app_name>setiathome_enhanced</app_name>
<version_num>610</version_num>
<platform>windows_x86_64</platform>
<plan_class>cuda_fermi</plan_class>
<avg_ncpus>0.040000</avg_ncpus>
<max_ncpus>0.040000</max_ncpus>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>Lunatics_x41zc_win32_cuda42.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>cudart32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>cufft32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>mbcuda.cfg</file_name>
</file_ref>
</app_version>
<app_version>
<app_name>setiathome_enhanced</app_name>
<version_num>609</version_num>
<platform>windows_x86_64</platform>
<plan_class>cuda23</plan_class>
<avg_ncpus>0.040000</avg_ncpus>
<max_ncpus>0.040000</max_ncpus>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>Lunatics_x41zc_win32_cuda42.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>cudart32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>cufft32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>mbcuda.cfg</file_name>
</file_ref>
</app_version>
<app_version>
<app_name>setiathome_enhanced</app_name>
<version_num>608</version_num>
<platform>windows_x86_64</platform>
<plan_class>cuda</plan_class>
<avg_ncpus>0.040000</avg_ncpus>
<max_ncpus>0.040000</max_ncpus>
<coproc>
<type>CUDA</type>
<count>1</count>
</coproc>
<file_ref>
<file_name>Lunatics_x41zc_win32_cuda42.exe</file_name>
<main_program/>
</file_ref>
<file_ref>
<file_name>cudart32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>cufft32_42_9.dll</file_name>
</file_ref>
<file_ref>
<file_name>mbcuda.cfg</file_name>
</file_ref>
</app_version>
</app_info>
11) Message boards : Number crunching : Tons of Invalid Results (Message 1387441)
Posted 414 days ago by Profile dcappello
So I started updating all my SETI nodes - bringing a few of them back online and put them back to work.

One rig "seasnake" http://setiathome.berkeley.edu/results.php?hostid=4038605

Is having fits with the new v7 app and lunatics new installer - everything is win7 64 bit and
so are all the installers. (install is working just fine no issues there)

I have removed (multiple times) BOINC and Lunatics - and even removed my app-info file
and I am still pulling errors - blowing through GPU units like no tomorrow - generating
a boat load of errors (sorry about that) Mark was helping me out and suggested I post up.
I am at a loss of how to fix this. Open to suggestions and ideas?

Machine details:


GPU (there are 2 of them in this rig)


Here are my selections for Lunatics


and



No errors on BOINC v7 startup that I can see:


Anybody have any ideas what I should be looking at?


12) Message boards : Number crunching : SETI/BOINC Milestones [ v2.0 ] - XXV [ CLOSED ] (Message 1387004)
Posted 415 days ago by Profile dcappello
I am still here - limping along - need to catch up and update all my apps get some of my nodes back online.
13) Message boards : Number crunching : CLOSED* SETI/BOINC Milestones [ v2.0 ] - XXIV *CLOSED (Message 1305703)
Posted 647 days ago by Profile dcappello
Still here and crunching along (still in the top 20 all time) Cooling off here in TX perhaps
I can fire up the machines I idled.
Congrats to all those with new milestones!
14) Message boards : Number crunching : Finally! GPU wars 2012 - GTX 650 Ti reviews (Message 1180369)
Posted 972 days ago by Profile dcappello
Anybody luck enough to have one running?
15) Message boards : Number crunching : Lunatics Windows Installer v0.39 release notes (Message 1174449)
Posted 997 days ago by Profile dcappello
Loading it up on one of my hosts now. Well done guys!!!
16) Message boards : Number crunching : Seti@Home Newsletter , Donations (Message 1173952)
Posted 999 days ago by Profile dcappello
I miss my green star.

Dear David Cappello,

Thank you for your gift to:

SETI@home

We received your gift of $250.00 via credit card on 11/26/2011. Your confirmation number is xxxxx

Plus I have filled out the Co match forms - so that is a total of $500.00 usd.

17) Message boards : Number crunching : CLOSED* SETI/BOINC Milestones [ v2.0 ] - XXIII *CLOSED (Message 1164584)
Posted 1035 days ago by Profile dcappello
well done to you all on your milestones - there are lots more in front..... Cooler weather means more machines for me....
18) Message boards : Cafe SETI : Astroclip (Message 1141060)
Posted 1102 days ago by Profile dcappello
Ran across this project in Kickstarter - funny thing is I was in the middle of fabricating just this sort of thing to hold my iPhone on a scope.



Check out astroclip at:

http://www.kickstarter.com/projects/mgeyster/astrocliptm-photograph-the-cosmos-with-your-iphone

And yes I am backing the project.
19) Message boards : Number crunching : Goodbye (Message 1134550)
Posted 1118 days ago by Profile dcappello
Chris,

Do you know anybody that has build a rig using expansion backplanes and is crunching 7X24 ?
I am interested and intrigued to say the least - looking at my RAC you will know why I just
couldn't keep things cool this summer here in Dallas with 25+ days over 100F. Thinking to unloading some machines and going this expansion route. Comments most welcome.

JPM - sorry to see you bail - I hope you'll come back someday.
20) Message boards : Number crunching : HEATWAVE SHUTDOWN!! (Message 1131915)
Posted 1123 days ago by Profile dcappello
I have idled the majority of my big crunchers - going on 22+ days of 100F+ days here in Dallas.


Next 20

Copyright © 2014 University of California