Posts by William de Thomas


log in
1) Message boards : Number crunching : Tesla K40 not recognized as GPU (Message 1480613)
Posted 190 days ago by Profile William de Thomas
All working well so far.
2) Message boards : Number crunching : Tesla K40 not recognized as GPU (Message 1478725)
Posted 194 days ago by Profile William de Thomas
Same here. I have two GTX Titans and two Tesla K40 set up on the same machine.
3) Message boards : Number crunching : Tesla K40 not recognized as GPU (Message 1474077)
Posted 205 days ago by Profile William de Thomas
Got the two Tesla K40 running and they are recognized here at home. Seems the remote server was not set up with the correct driver or something. Will post later on the PPD
4) Message boards : Number crunching : Tesla K40 not recognized as GPU (Message 1468148)
Posted 219 days ago by Profile William de Thomas
Thanks for the reply. i did remove seti at one point and added GPU Grid and then went back to seti at another time. Since I only had 5 hours testing time I was in a little rush. Folding@home didn't work either with the Tesla K40.

I will receive two Tesla K40 by the end of this month (hopefully) and I will retest and post my observations. They will be installed at my home so I will be able to do a lot of things (testing) on them.

As I mentioned earlier, as it was on a remote server, I couldn't do much. Just wanted to know if anybody had this problem also because the K40 are so new.

Thanks
5) Message boards : Number crunching : Tesla K40 not recognized as GPU (Message 1467821)
Posted 220 days ago by Profile William de Thomas
I thought about that also, it being to new. Thanks
6) Message boards : Number crunching : Tesla K40 not recognized as GPU (Message 1467793)
Posted 220 days ago by Profile William de Thomas
I mentioned to the AMAX contact person the problem but never received an answer back. Don't know if they looked into it.
7) Message boards : Number crunching : Tesla K40 not recognized as GPU (Message 1467704)
Posted 220 days ago by Profile William de Thomas
Yeah, I am almost sure it's a driver issue. Due that it is a remote server I don't know the drivers installed on that machine . I do know that I looked into the control panel and they were there and recognized so I imagine that the drivers were installed for those cards.

Thanks for the replies.
8) Message boards : Number crunching : Tesla K40 not recognized as GPU (Message 1467482)
Posted 221 days ago by Profile William de Thomas
Hello, I just had the privilege of testing out the Tesla K40 on the Nvidia Tesla test drive site. Once I installed the Boinc software on their server and ran seti@home, only the cpu on that server did tasks. I looked in the log and the Teslas showed up (4 of them, nice) but no GPU task were downloaded to the server. I installed Boinc on my server that has Two GTX Titans and I was able to download task for the GPU and I also used Lunatics to help out.

I also installed folding@home and it would not do any GPU task either (on the remote server). GPU Grid did not work either.

I am assuming that it might be a Tesla driver problem. Any feedback on this would be appreciated.
9) Message boards : Number crunching : Gripes and Kudos II (Message 1170481)
Posted 1023 days ago by Profile William de Thomas
Gripe: Still not enough WU downloaded. And Monday is coming up fast (three day outage). Average work going down below 19,000 when it was up almost 30,000. It seems that the radio telescope is not sending enough info to be analyzed.
10) Message boards : News : 2 Billion Results (Message 1169544)
Posted 1026 days ago by Profile William de Thomas
Yes it has been several weeks that I have noticed that I don't receive a 10 load of work units. I have amd X6 (all 6 cores working) and two GTX 460se. This computer is 24/7 for seti@home. Been crunching since 1999.
11) Message boards : News : 2 Billion Results (Message 1169523)
Posted 1026 days ago by Profile William de Thomas
True, but they are celebrating 1 billion and there are no work units to work on for THREE days. I have my computer set for 10 days of work!! Something is not right.
12) Message boards : News : 2 Billion Results (Message 1169427)
Posted 1026 days ago by Profile William de Thomas
wow. I don't have not even ONE work unit to crunch. Now that is super slow. And I am thinking on upgrading with a P6T7 motherboard and four GTX 570, I must be crazy.
13) Message boards : Number crunching : 2 Nvidia 550' or a 560 TI (Message 1168888)
Posted 1028 days ago by Profile William de Thomas
Asus P6T7 and a couple of GTX 570 is what I am considering
14) Message boards : Number crunching : 2 Nvidia 550' or a 560 TI (Message 1168834)
Posted 1029 days ago by Profile William de Thomas
I am planning myself on two GTX 570 (they have 480 cuda cores each). Right now I have two GTX 460se plus a six core AMD cpu and they run excellent. I have a 1200 power supply that I got on ebay for about 60$ and has worked great. The power supply supports SLI so it has all the connector I need.
15) Message boards : Number crunching : A temp fix for our bandwith problems ? (Message 1168637)
Posted 1029 days ago by Profile William de Thomas
I have a cache set for 10 days and it seems that it's never enough. Right now I am out of work and the server or router problem has not been out for 10 days.
16) Message boards : Number crunching : GTX 460 (Message 1164228)
Posted 1045 days ago by Profile William de Thomas
Here are my stats
17) Message boards : Number crunching : GTX 460 (Message 1164225)
Posted 1045 days ago by Profile William de Thomas
I have a AMD X6 1090T with two GTX 460. Average credit a day 38,353. No overclocking on cpu or gpu. About to buy a Gigabite Assasin and install four individual NO SLI GTX 460 and see what happens. Also, I am using Lunatics.


Copyright © 2014 University of California