41)
Message boards :
Number crunching :
Ryzen and Threadripper
(Message 2043594)
Posted 8 Apr 2020 by Jord Post: Played around with the voltages the past day and a half. Trouble is, when I manually set voltages in the BIOS, it locks the clockspeed in place. So either I set the speed to something high (say 4050) and then the CPU constantly runs at that speed, or I leave it at base speed (3800) but then no boost. So I went back to leaving voltages on Auto and instead set the CPU Core Voltage to an offset of -0.1V. That results in still having the boost, yet lower temperatures all around. Core Voltage runs at 1.264V, VID at 1.300-1.325V |
42)
Message boards :
Number crunching :
SETI orphans
(Message 2043484)
Posted 7 Apr 2020 by Jord Post: 1.5GB? Hmmm, here all my devices tell me they need a minimum of 1.984GB free. Which even on the device with 3GB of working memory isn't available.Does Rosetta support Android devices?Yes, but it needs 1.5GB min RAM per Task (Many are only 400MB, but there are some huge ones). |
43)
Questions and Answers :
Windows :
What happened to my CPU'S?
(Message 2043481)
Posted 7 Apr 2020 by Jord Post: Seeing how he got a new hostID and he's running Windows 10 x64 Pro, I suspect he's replaced his motherboard. |
44)
Questions and Answers :
Windows :
How do i get the Graph screensaver on Win10?
(Message 2043309)
Posted 6 Apr 2020 by Jord Post: The Seti screen saver would only show when you were running Seti work on the CPU. Since there is no work from Seti anymore, no screen saver from Seti can be shown either. |
45)
Questions and Answers :
Web site :
WHERE DO WE GO FROM HERE?
(Message 2043137)
Posted 5 Apr 2020 by Jord Post: Enough choice: https://boinc.berkeley.edu/projects.php |
46)
Questions and Answers :
Unix/Linux :
RPi 1 B+ Raspbian BOINC SETI@home Not Getting Work
(Message 2043136)
Posted 5 Apr 2020 by Jord Post: That news is no longer directly in view on the front page. @OP, please read https://setiathome.berkeley.edu/forum_thread.php?id=85267&postid=2035163 |
47)
Questions and Answers :
Windows :
Apologies but I think I missed something...
(Message 2043069)
Posted 5 Apr 2020 by Jord Post: You can read all about it in https://setiathome.berkeley.edu/forum_thread.php?id=85267&postid=2035163 |
48)
Message boards :
Number crunching :
Ryzen and Threadripper
(Message 2042987)
Posted 4 Apr 2020 by Jord Post: How much a bit of playing with the core voltage and VID voltage of the CPU can matter. My 3900X ran 54C at idle, at the stock VID (auto = 1.45V) and stock VCore (auto = 0.9-1.5V), 74C on 11 cores running various tasks under BOINC. I set VCore to 1.2V, VID to 1.1V and am now running those 11 cores at a max of 55C. Can't even hear the fans on my cooling this way. (VID is what you want the CPU to use, VCore is the max it can use) |
49)
Questions and Answers :
Windows :
What happened to my CPU'S?
(Message 2042900)
Posted 4 Apr 2020 by Jord Post: Commendable that you try to help and all, but the 3 gig RAM limit you bite yourself into is of his AMD videocard, not his main RAM. That is neatly recognized as 16GB, and his Windows as 10 x64: https://setiathome.berkeley.edu/show_host_detail.php?hostid=8881812 |
50)
Message boards :
Number crunching :
The Server Issues / Outages Thread - Panic Mode On! (119)
(Message 2042558)
Posted 2 Apr 2020 by Jord Post: At least this time he can blame someone else. DA, yes that DA wrote: BOINC and Science United have moved to a new server, running up-to-date versions of Linux (Ubuntu), MariaDB, PHP, GNU tools, Mediawiki, and so on. Thanks to Jeff Cobb for overseeing this; it wasn't easy. Let me know if any problems. |
51)
Message boards :
Number crunching :
The Server Issues / Outages Thread - Panic Mode On! (119)
(Message 2042530)
Posted 2 Apr 2020 by Jord Post: At least it was a good time to change BOINC over onto a new webserver, which promptly went offline. Good thing I read that David asked to report any problems. I think the server being AWOL since about 10am LT counts like such. :P |
52)
Message boards :
Number crunching :
The Server Issues / Outages Thread - Panic Mode On! (119)
(Message 2042488)
Posted 2 Apr 2020 by Jord Post: it says that there are 4,882,659 Results ready to send.You forgot to wash your eyes out with coffee again in these coronadays? RRtS is 0, has been since the last tape went through. RoitF is 4,880,027 |
53)
Message boards :
Number crunching :
The Server Issues / Outages Thread - Panic Mode On! (119)
(Message 2042013)
Posted 31 Mar 2020 by Jord Post: Hmmm, a recurring theme. 31/03/2020 18:21:49 | SETI@home | Project has no tasks available 31/03/2020 18:27:26 | SETI@home | Project has no tasks available 31/03/2020 18:32:35 | SETI@home | Project has no tasks available 31/03/2020 18:37:43 | SETI@home | Project has no tasks available |
54)
Message boards :
News :
Final data is in the splitter queue.
(Message 2042012)
Posted 31 Mar 2020 by Jord Post: Eric, what are you going to do about the requirement of RAC > 1 to be able to post on the main forums? |
55)
Message boards :
News :
Jim_S has passed away.
(Message 2041929)
Posted 31 Mar 2020 by Jord Post: Farewell Jim, and Monday too. Was a bit of a shock to read you both went to the other side so close together. |
56)
Questions and Answers :
Web site :
World view animation
(Message 2041928)
Posted 31 Mar 2020 by Jord Post: If this is on the system with the AMD GPU and you have one of the newer AMD drivers with Radeon Settings installed, it has a full screen recorder as well via ReLive: press CTRL+SHIFT+E at the same time (but watch out with BOINC open as it uses this key set to open the event log). |
57)
Message boards :
Number crunching :
The Server Issues / Outages Thread - Panic Mode On! (119)
(Message 2041893)
Posted 31 Mar 2020 by Jord Post: Eric Korpela wrote: You didn't think this would go smoothly, did you? ♫ And now, the end is near And so I face the final curtain My friend, I'll say it clear I'll state my case, of which I'm certain I've lived a life that's full I traveled each and every highway And more, much more than this I did it my way Regrets, I've had a few But then again, too few to mention I did what I had to do And saw it through without exemption I planned each charted course Each careful step along the byway And more, much more than this I did it my way Yes, there were times, I'm sure you knew When I bit off more than I could chew But through it all, when there was doubt I ate it up and spit it out I faced it all, and I stood tall And did it my way I've loved, I've laughed and cried I've had my fill, my share of losing And now, as tears subside I find it all so amusing To think I did all that And may I say, not in a shy way Oh, no, oh, no, not me I did it my way For what is a man, what has he got? If not himself, then he has naught To say the things he truly feels And not the words of one who kneels The record shows I took the blows And did it my way Yes, it was my way ♫ Old Blue Eyes |
58)
Questions and Answers :
Windows :
I need a little help..
(Message 2041847)
Posted 31 Mar 2020 by Jord Post: Yes, all other projects under BOINC continue. |
59)
Questions and Answers :
Unix/Linux :
Unable to connect (on Linux)
(Message 2041655)
Posted 30 Mar 2020 by Jord Post: Usually when BOINC Manager is unable to connect to the core client, it's because the core client isn't there... it's crashed. Check in top if a process called boinc (sometimes called boinc-client) is running. If not, try either of the following before starting BOINC Manager: sudo systemctl start boinc-clientor /etc/init.d/boinc-client start Mind you, if the client isn't running because it crashed last time, it'll probably crash again. You then have to figure out why it crashes. You can also check if the client is running using /etc/init.d/boinc-client statusor sudo systemctl status boinc-client |
60)
Message boards :
Number crunching :
SETI orphans
(Message 2041652)
Posted 30 Mar 2020 by Jord Post: Of course, last day of work issue and my BOINC runs 9 Seti tasks on CPU. What? Do these really take just 18 minutes per task? Wow. How far we got since P4 times. |
©2024 University of California
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.