Help me Optimize my GPUs

Message boards : Number crunching : Help me Optimize my GPUs
Message board moderation

To post messages, you must log in.

AuthorMessage
elec999 Project Donor

Send message
Joined: 24 Nov 02
Posts: 375
Credit: 416,969,548
RAC: 141
Canada
Message 1893151 - Posted: 4 Oct 2017, 13:02:18 UTC

[2] NVIDIA GeForce GTX 980 (4095MB) driver: 384.76 OpenCL: 1.2
I need some help getting better results from them...
ID: 1893151 · Report as offensive
Iona
Avatar

Send message
Joined: 12 Jul 07
Posts: 790
Credit: 22,438,118
RAC: 0
United Kingdom
Message 1893159 - Posted: 4 Oct 2017, 14:08:15 UTC - in response to Message 1893151.  
Last modified: 4 Oct 2017, 14:13:58 UTC

Well, you could try dropping this line into your "mb_cmdline_win_x86_SSE3_OpenCL_NV.txt" in your projects folder. Open that folder with Notepad. Copy and paste the line. Save. Next task to run will run with those settings and with fingers crossed, it should be much faster and without errors(!).

-sbs 1024 -spike_fft_thresh 4096 -tune 1 64 1 4 -oclfft_tune_gr 256 -oclfft_tune_lr 16 -oclfft_tune_wg 256 -oclfft_tune_ls 512 -oclfft_tune_bn 64 -oclfft_tune_cw 64

However, unless I am mistaken, you'll first have to re-run the Lunatics Installer. If you don't have it, you can get it from Mike's World. The current installer package there is the Lunatics 0.45. package. After running the installer, then look for that folder (mb_cmdline_win_x86_SSE3_OpenCL_NV.txt) in your projects folder (setiathome.berkeley.edu. or something like that).
Don't take life too seriously, as you'll never come out of it alive!
ID: 1893159 · Report as offensive
elec999 Project Donor

Send message
Joined: 24 Nov 02
Posts: 375
Credit: 416,969,548
RAC: 141
Canada
Message 1893163 - Posted: 4 Oct 2017, 14:22:38 UTC - in response to Message 1893159.  

Well, you could try dropping this line into your "mb_cmdline_win_x86_SSE3_OpenCL_NV.txt" in your projects folder. Open that folder with Notepad. Copy and paste the line. Save. Next task to run will run with those settings and with fingers crossed, it should be much faster and without errors(!).

-sbs 1024 -spike_fft_thresh 4096 -tune 1 64 1 4 -oclfft_tune_gr 256 -oclfft_tune_lr 16 -oclfft_tune_wg 256 -oclfft_tune_ls 512 -oclfft_tune_bn 64 -oclfft_tune_cw 64

However, unless I am mistaken, you'll first have to re-run the Lunatics Installer. If you don't have it, you can get it from Mike's World. The current installer package there is the Lunatics 0.45. package. After running the installer, then look for that folder (mb_cmdline_win_x86_SSE3_OpenCL_NV.txt) in your projects folder (setiathome.berkeley.edu. or something like that).


I added that line, how can I know its working?
ID: 1893163 · Report as offensive
Iona
Avatar

Send message
Joined: 12 Jul 07
Posts: 790
Credit: 22,438,118
RAC: 0
United Kingdom
Message 1893165 - Posted: 4 Oct 2017, 14:43:23 UTC - in response to Message 1893163.  

The speed increase would be quite visibly noticeable. Clicking on 'Properties' of SETI GPU task(s) in BOINC Manager, should show the running executable as being, MB8_win_x86_SSE3_OpenCL_NV_SoG_r3557.exe. If not, did you re-run the installer?
Don't take life too seriously, as you'll never come out of it alive!
ID: 1893165 · Report as offensive
kittyman Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 9 Jul 00
Posts: 51468
Credit: 1,018,363,574
RAC: 1,004
United States
Message 1893166 - Posted: 4 Oct 2017, 14:45:31 UTC - in response to Message 1893165.  

And was the SOG app selected when running the installer?
"Freedom is just Chaos, with better lighting." Alan Dean Foster

ID: 1893166 · Report as offensive
Iona
Avatar

Send message
Joined: 12 Jul 07
Posts: 790
Credit: 22,438,118
RAC: 0
United Kingdom
Message 1893167 - Posted: 4 Oct 2017, 14:53:58 UTC - in response to Message 1893166.  

Yes, indeed so, Mark. It is the NV_OpenCL_SoG version that is needed. Maybe I should have made a few more assumptions.
Don't take life too seriously, as you'll never come out of it alive!
ID: 1893167 · Report as offensive
kittyman Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 9 Jul 00
Posts: 51468
Credit: 1,018,363,574
RAC: 1,004
United States
Message 1893170 - Posted: 4 Oct 2017, 15:10:18 UTC
Last modified: 4 Oct 2017, 15:11:01 UTC

And I believe the correct name of the file to add that command line to is..............
mb_cmdline_win_x86_SSE3_OpenCL_NV_SoG.txt

I got confused on that just this past weekend.
"Freedom is just Chaos, with better lighting." Alan Dean Foster

ID: 1893170 · Report as offensive
Iona
Avatar

Send message
Joined: 12 Jul 07
Posts: 790
Credit: 22,438,118
RAC: 0
United Kingdom
Message 1893173 - Posted: 4 Oct 2017, 15:16:29 UTC - in response to Message 1893170.  

Yep, you got it! Thankfully, I also got that right in my original reply <breathes sigh of relief>.
Don't take life too seriously, as you'll never come out of it alive!
ID: 1893173 · Report as offensive
kittyman Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 9 Jul 00
Posts: 51468
Credit: 1,018,363,574
RAC: 1,004
United States
Message 1893174 - Posted: 4 Oct 2017, 15:18:07 UTC - in response to Message 1893173.  
Last modified: 4 Oct 2017, 15:24:08 UTC

LOL.
No, ya didn't............
Check again.
You posted "mb_cmdline_win_x86_SSE3_OpenCL_NV.txt".
That's why I clarified with "mb_cmdline_win_x86_SSE3_OpenCL_NV_SoG.txt".

Just trying to save some confusion there.
"Freedom is just Chaos, with better lighting." Alan Dean Foster

ID: 1893174 · Report as offensive
Iona
Avatar

Send message
Joined: 12 Jul 07
Posts: 790
Credit: 22,438,118
RAC: 0
United Kingdom
Message 1893179 - Posted: 4 Oct 2017, 15:32:31 UTC - in response to Message 1893174.  

D'oh!!! Honestly, I don't know <head-slaps self>....got a head too full of file names and loads of different Notepad file names to see it! Thanks for pointing it out, Mark.
Don't take life too seriously, as you'll never come out of it alive!
ID: 1893179 · Report as offensive
kittyman Crowdfunding Project Donor*Special Project $75 donorSpecial Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 9 Jul 00
Posts: 51468
Credit: 1,018,363,574
RAC: 1,004
United States
Message 1893180 - Posted: 4 Oct 2017, 15:35:19 UTC - in response to Message 1893179.  

No worries, we all do it for sure.
Just wanted to be sure he was pointed in the right direction.

Meow.
"Freedom is just Chaos, with better lighting." Alan Dean Foster

ID: 1893180 · Report as offensive
elec999 Project Donor

Send message
Joined: 24 Nov 02
Posts: 375
Credit: 416,969,548
RAC: 141
Canada
Message 1893210 - Posted: 4 Oct 2017, 18:24:27 UTC

I placed the line inside mb_cmdline_win_x86_SSE3_OpenCL_NV_SoG.txt but I see Lunatics_x41zi_wind32_cuda32.exe running.
ID: 1893210 · Report as offensive
Profile Zalster Special Project $250 donor
Volunteer tester
Avatar

Send message
Joined: 27 May 99
Posts: 5517
Credit: 528,817,460
RAC: 242
United States
Message 1893246 - Posted: 4 Oct 2017, 22:30:34 UTC - in response to Message 1893210.  

Even though it says cuda 32 on the name of the work units, if you installed the SoG, it will run on the SoG application. The cuda 32 was stamped on it when the work unit was first downloaded. Each new work unit will say SoG on it. You can verify that it was crunched with the SoG by looking at the stderr output when it reports. You can also look there to see if your commandlines too affect.
ID: 1893246 · Report as offensive
Grant (SSSF)
Volunteer tester

Send message
Joined: 19 Aug 99
Posts: 13720
Credit: 208,696,464
RAC: 304
Australia
Message 1893314 - Posted: 5 Oct 2017, 3:45:20 UTC - in response to Message 1893210.  
Last modified: 5 Oct 2017, 3:46:56 UTC

I placed the line inside mb_cmdline_win_x86_SSE3_OpenCL_NV_SoG.txt but I see Lunatics_x41zi_wind32_cuda32.exe running.

You have multiple computers.

Your i7 920 is running SoG, but not the command line values to improve performance.
Your i7-3770K is running CUDA50, hence it's rather long crunching times. Re-run the installer & select SoG
Your A10-5800K is running SoG, with the default values- not sure what the effect of changing them is for AMD hardware.
Your i7-3930K is running CUDA32, hence it's ridiculously long crunching times. Re-run the installer & select SoG.
Your E3-1230 v3 is running SoG, with the default values.

When you run the installer, it generally will choose the best application for the CPU- however you must select the appropriate application for the GPU.
Grant
Darwin NT
ID: 1893314 · Report as offensive
Profile petri33
Volunteer tester

Send message
Joined: 6 Jun 02
Posts: 1668
Credit: 623,086,772
RAC: 156
Finland
Message 1895116 - Posted: 13 Oct 2017, 21:18:07 UTC - in response to Message 1893151.  
Last modified: 13 Oct 2017, 21:19:59 UTC

[2] NVIDIA GeForce GTX 980 (4095MB) driver: 384.76 OpenCL: 1.2
I need some help getting better results from them...


1) Install Linux.
2) get a Soft ware to do what a person has to do. (Missspellintentional)

--
Me

EDIT: if you want to triple your RAC.
ID: 1895116 · Report as offensive

Message boards : Number crunching : Help me Optimize my GPUs


 
©2024 University of California
 
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.