Message boards :
Number crunching :
-226 (0xffffffffffffff1e) ERR_TOO_MANY_EXITS
Message board moderation
Author | Message |
---|---|
_heinz Send message Joined: 25 Feb 05 Posts: 744 Credit: 5,539,270 RAC: 0 |
Hi, get this error, never I had seen it before. I run Jasons x41zc Any ideas ? Have a look please: resultid=2950836341 resultid=2950836353 resultid=2950836361 resultid=2950836363 |
Ivailo Bonev Send message Joined: 26 Jun 00 Posts: 247 Credit: 35,864,461 RAC: 2 |
This is the key: "...in line 21 : out of memory." Your video memory is not enough, try older video driver or attach more memory if it uses RAM. |
_heinz Send message Joined: 25 Feb 05 Posts: 744 Credit: 5,539,270 RAC: 0 |
Looked up with GPUZ GPUZ_ION_GPU_Memory_used_x41zc We see as a wu starts and when GPU load is comming up to 96%, Memory goes up to 243MB. ION Shows 26.04.2013 16:16:26 | | CUDA: NVIDIA GPU 0: ION (driver version 314.22, CUDA version 5.0, compute capability 1.1, 256MB, 199MB available, 53 GFLOPS peak) Maybe I opened 2 Websites during crunching... |
Wiggo Send message Joined: 24 Jan 00 Posts: 34744 Credit: 261,360,520 RAC: 489 |
Have a look in your BIOS and see if you can allocate more memory to it (512MB should do it). Cheers. |
Jord Send message Joined: 9 Jun 99 Posts: 15184 Credit: 4,362,181 RAC: 3 |
As far as I know, BOINC only detects the memory actually on the GPU. Memory added from system memory is not detected and thus not used. |
Wiggo Send message Joined: 24 Jan 00 Posts: 34744 Credit: 261,360,520 RAC: 489 |
As far as I know, BOINC only detects the memory actually on the GPU. Memory added from system memory is not detected and thus not used. All Atom/ION setups that I've worked with use a portion of system memory for the video card. Cheers. |
William Send message Joined: 14 Feb 13 Posts: 2037 Credit: 17,689,662 RAC: 0 |
Heinz, drop down to Cuda 2.3 or Cuda 3.2 for the Ion - cuda 4.2 is for Fermi and cuda 5 is for Kepler. I doubt the ION classes as a Kepler ;) You may want to bench to see if 2.3 or 3.2 is better. I'd increase priority to above_normal for more even running, possibly incurring a slight lag at task startup. With 256 MiB make sure you shut off Aero and GPU acceleration of your browser. Many tabs shouldn't be an issue, but watching a video could. Also, any GPU intensive app should be excluded via cc_config.xml (e.g. games. some will coexsist nicely with x41zc others will squeeze it out.) And thanks for inadvertedly testing that 'too many exits' was properly implemented for temporary exits. A person who won't read has no advantage over one who can't read. (Mark Twain) |
_heinz Send message Joined: 25 Feb 05 Posts: 744 Credit: 5,539,270 RAC: 0 |
Hi William, x41zc runs very well on the ION with NVIDIA Driver 314.22 CUDA Version 5.0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 29.04.2013 15:07:14 | | CUDA: NVIDIA GPU 0: ION (driver version 314.22, CUDA version 5.0, compute capability 1.1, 256MB, 207MB available, 53 GFLOPS peak) 29.04.2013 15:07:14 | | OpenCL: NVIDIA GPU 0: ION (driver version 314.22, device version OpenCL 1.0 CUDA, 256MB, 207MB available, 53 GFLOPS peak) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Normally I shutdown BOINC if I want to work with R3600, but sometimes I forgot it. It's such a nice small machine Atom, 2GB RAM,ION Chipset, but good enough to make daily mail and text and read the forums. I use it in the living room on 40" Samsung TV. Ist nice to work with such big display in Full HD. I like it. Greetings :-) |
William Send message Joined: 14 Feb 13 Posts: 2037 Credit: 17,689,662 RAC: 0 |
Hi William, Yes of course it CAN run with the Cuda 5.0 version, but in all likelyhood the 2.3 or 3.2 Cuda version will run significantly faster. Newer isn't always better ;) edit: that the driver says Cuda 5 only means, that that is the highest CUDA runtime DLL supported - you can still run apps all the way down to cuda 1.0 if the app is compiled to use cuda 1.0... A person who won't read has no advantage over one who can't read. (Mark Twain) |
_heinz Send message Joined: 25 Feb 05 Posts: 744 Credit: 5,539,270 RAC: 0 |
had I then install CUDA3.2 again ? Or it is enogh to have some dll from CUDA3.2 ? |
William Send message Joined: 14 Feb 13 Posts: 2037 Credit: 17,689,662 RAC: 0 |
had I then install CUDA3.2 again ? Just get the 2.3/3.2 package from CA or Jason's site - it contains all necessary files, incl. DLLs. You don't need to change driver or anything just different app and matching DLLs in the project folder and matching edits in app_info.xml of course. The MBCuda.aistub from the package matches the app it comes with - as a template for your own edits or run aimerge as prefered and appropriate for the setup. A person who won't read has no advantage over one who can't read. (Mark Twain) |
_heinz Send message Joined: 25 Feb 05 Posts: 744 Credit: 5,539,270 RAC: 0 |
|
William Send message Joined: 14 Feb 13 Posts: 2037 Credit: 17,689,662 RAC: 0 |
Jasons site is online, but does not answer Then go to CA ::) 2.3 3.2 I'd just email the packages, but your email might not like having over 3MB dropped into it. A person who won't read has no advantage over one who can't read. (Mark Twain) |
_heinz Send message Joined: 25 Feb 05 Posts: 744 Credit: 5,539,270 RAC: 0 |
Thanks, did download from CA. if Caches is empty, I install. :-) |
Bruce Send message Joined: 15 Mar 02 Posts: 123 Credit: 124,955,234 RAC: 11 |
Looks to me like you are running a 32bit version of Win7. You will need a 32bit version of x41zc also. x41zc3.2x32 I don't think a 64bit version will work. Hope you get this sorted out Bruce Bruce |
William Send message Joined: 14 Feb 13 Posts: 2037 Credit: 17,689,662 RAC: 0 |
Looks to me like you are running a 32bit version of Win7. You will need a 32bit version of x41zc also. Oops. That was me being unfocused. Thanks for pointing that out. Sorry - the only difference is in the .aistub supplied, not in the apps themselves. So the app will run, but the aistub had better not be used iwht aimerge but rather as a template to copy/paste the right app and dll names into the working app_info.xml. 'replace all' works best with the multiple occurences of file names and makes sure you don't forget one. Been there done that. It's rather more embarassing when you're doing it for the larger public... A person who won't read has no advantage over one who can't read. (Mark Twain) |
kittyman Send message Joined: 9 Jul 00 Posts: 51468 Credit: 1,018,363,574 RAC: 1,004 |
Meanwhile, back at the ranch. Jason's download site is currently working fine for me. Maybe _heinz can reach it now. "Freedom is just Chaos, with better lighting." Alan Dean Foster |
_heinz Send message Joined: 25 Feb 05 Posts: 744 Credit: 5,539,270 RAC: 0 |
Have a hardwaresolution found to avoid disturbing the ION during crunching. Use a USB-Grafik-adapter as Primary Monitor and all should work. Grafikkarte-J5Create-Externe-USB-Grafikkarten-auf-HDMI |
_heinz Send message Joined: 25 Feb 05 Posts: 744 Credit: 5,539,270 RAC: 0 |
W7 32Bit ION x41zc with CUDA32 is running now. see results runtime is now smaller than x41zc CUDA5 The ION runs faster with CUDA32 @William, if you will collect results, here there are. Greetings D5400XS V8-Xeon |
Claggy Send message Joined: 5 Jul 99 Posts: 4654 Credit: 47,537,079 RAC: 4 |
W7 32Bit If you try the Cuda23 version, you should find that is faster still, especially with drivers later than 301.xx Claggy |
©2024 University of California
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.