Mine is saying the same thing...No units to give.

---

Still no Units to download ...Servers must be off line

---

when you see The Message 'Communication deferred' ... (on The Projects tab) ... if you Click on the Tasks tab after a short time, you will sometimes see that your Completed Work has actually been uploaaded. However, it will still be Counting down on The Projects Tab on theat coumn which says Deferred. It's not Necessarily Related to The Issue Of The Servers.

---

GALAXY-VOYAGER

Posted the info for the outage on Lunatics, GPUUG and my site.

---

Nice to make your aquaintance too.

---

GALAXY-VOYAGER

I recently came back to SETI@Home, so I'm a complete noob in this matter and in need of help/advice.

I upgraded my video card from an nVidia EN9800GTX+ to an nVidia 670GTX+ yesterday. For another project (GPUGRID) everything is working well with the new video card; blocks I submitted since the upgrade have been checked and are fine. With the old card I had no problems processing cuda blocks for SETI either, but with the new card something seems to have gone wrong.

I'm receiving cuda_fermi blocks for my kepler card. Does this have something to do with the scheduler trouble of the moment, or is something else wrong? The website does seem to report my computer correctly as having:

GenuineIntel
Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz [Family 6 Model 58 Stepping 9]
(4 processoren)

NVIDIA GeForce GTX 670 (2048MB) driver: 310.70

Any info or help is much appreciated, but keep in mind I'm not a pro at this yet.

Thanks all!

[edit]
Forgot to mention:
Every downloaded block for cuda_fermi has processed for between 17 and 19 seconds, after which a calculation error was reported. There are 63 blocks with errors because of this.
[/edit]

---

[edit]
Forgot to mention:
Every downloaded block for cuda_fermi has processed for between 17 and 19 seconds, after which a calculation error was reported. There are 63 blocks with errors because of this.
[/edit]

Try this: http://setiathome.berkeley.edu/forum_thread.php?id=69735

---

[edit]
Forgot to mention:
Every downloaded block for cuda_fermi has processed for between 17 and 19 seconds, after which a calculation error was reported. There are 63 blocks with errors because of this.
[/edit]

Try this: http://setiathome.berkeley.edu/forum_thread.php?id=69735

Made the link active.

Claggy

Thanks Ivan & Claggy

It's not a scheduler problem then. I'll try one of the solutions in the list.


PS. is there a way to force my client to start over on the failed jobs while the scheduler is down? Or can I only wait for the scheduler to come back up later (report failure and ask for new jobs)

Would be good to keep it working on the jobs it already downloaded while we wait.

---

Thanks Ivan & Claggy

It's not a scheduler problem then. I'll try one of the solutions in the list.


PS. is there a way to force my client to start over on the failed jobs while the scheduler is down? Or can I only wait for the scheduler to come back up later (report failure and ask for new jobs)

Would be good to keep it working on the jobs it already downloaded while we wait.

You only need to do the second solution,

You could reset the project and then get your failed work resent (but you'd loose any CPU results that you're completed), then hit update until all your tasks are resent, (you don't need to wait 5 minutes between attempts at resending)
But since you're only got a small cache you'd probably get them all in one attempt, upping to about three days cache might get you some fresh work before the servers go down.

Claggy

You only need to do the second solution,

You could reset the project and then get your failed work resent (but you'd loose any CPU results that you're completed), then hit update until all your tasks are resent, (you don't need to wait 5 minutes between attempts at resending)
But since you're only got a small cache you'd probably get them all in one attempt, upping to about three days cache might get you some fresh work before the servers go down.

Claggy

I added the "CUDA_GRID_SIZE_COMPAT = 1" value as shown in the screenshots. Will that suffice? It's not clear to me whether I'm supposed to do all A B and C steps listed under the Kepler compatibility section, or just pick one of them to make it work. I'd rather not downgrade my drivers. Shame that topic is closed for comments/questions, else I'd have posted it there by now.

I decided to just report the CUDA errors and CPU work I had done. I thought the servers were down already, but apparently they weren't, so I just got some new jobs instead.

I increased the cache to 3 days.

I have some other questions about configuring projects/BOINC, but as I'm offtopic already here, I guess I should start finding the right forum posts to ask away. After all I already found out my problem wasn't scheduler related.

---

UPDATE: the outage scheduled for the weekend of the 4th-6th has been cancelled so normal operations shall continue. We still plan to have our air conditioner repaired and will be completely off line from January 14th to January 15th during that time.

For those who havn't started at the beginning of this thread

Thank You Matt

UPDATE: the outage scheduled for the weekend of the 4th-6th has been cancelled so normal operations shall continue. We still plan to have our air conditioner repaired and will be completely off line from January 14th to January 15th during that time.

For those who havn't started at the beginning of this thread

Thank You Matt

THANKS TOM

---

Those who cannot remember the past are condemned to repeat it.
--- George Santayana

Em que data (date) o seti@home volta ao normal?

---

[B]JERBIALDO [/ b]

Em que data (date) o seti@home volta ao normal?

Teoricamente já esta normal, pelo menos esta funcionando com o limite de 100WU por host.

---

Hello but my upload is done and the validation and new work
is zero? Its 12 januari..not 14 januari.
Are there problems with the validation?
I can't report them..:(

---

Ditto here. My completed units are stacking up and not getting uploaded even if I click "update" When I click on "your results" it says I received 20 work units yesterday. I know I had completed units yesterday and those weren't uploaded.

Having the same issue, I cannot upload or get new tasks. Is SETI dying?

crickets are maxed out. you have to wait your turn.

---

Can I please have some new work again for 2 days.
instead of 100 give me 200 or more cause the last
work units are already running.

Thank You.

---