Two ATI 7750s, Count 0.5, Four Active Tasks, Only Two Progressing?


log in

Advanced search

Message boards : Number crunching : Two ATI 7750s, Count 0.5, Four Active Tasks, Only Two Progressing?

Author Message
Alec
Send message
Joined: 3 Jun 06
Posts: 10
Credit: 816,773
RAC: 0
United States
Message 1305969 - Posted: 14 Nov 2012, 2:43:08 UTC
Last modified: 14 Nov 2012, 2:54:32 UTC

Hello,

I just put a couple of ATI 7750's (1MB memory) into an older ATI motherboard that happened to have two PCIE-2.0 slots running at 8x / 8x. The processor is an anemic Athlon 64x2, though upgradeable all the way to a PhenomII x6 if I so chose.

I'm using the Lunatics apps and have my COUNT set to 0.5. BOINC is showing four active tasks at a time, two per GPU, but only two progress at any one time, sometimes one from each card, sometimes both on the same card - the other two tasks just burn up time, but % complete doesn't move at all. I am not running CPU tasks. GPU-Z shows about 85% card utilization, which would normally mean I can run a second unit per card.

Any idea what's going on, why all four units do not progress at the same time? I thought I could get away with this configuration despite the slow 2-core CPU, but I don't know if this is indicative of a CPU throttle, or if it means these low-end cards can really only do one work unit at a time (unlikely since sometimes the WUs that are progressing are both on the same card) or if I'm doing something else stupid.

Thanks for any assistance.

EDIT: drivers are the latest, but I just noticed the cards are showing up as "unknown" in my computers list.
____________

Profile cov_route
Avatar
Send message
Joined: 13 Sep 12
Posts: 295
Credit: 7,352,976
RAC: 11,477
Canada
Message 1305976 - Posted: 14 Nov 2012, 3:34:54 UTC - in response to Message 1305969.
Last modified: 14 Nov 2012, 3:47:28 UTC

There is a mysterious bug related to cpu/gpu communication latency whose symptoms are just what you have.

The oft-mentioned kludge is to idle a core for every gpu job. You obviously can't do that for, er, obvious reasons.

As an experiment try setting the priority of the running processes (all four of them) to above normal or high and see what happens.

Oh, I assume you don't run any cpu tasks at the same time? I saw you aborted some.

Edit: Also try setting all 4 tasks to run on the same core. I know it's counter-intuitive but...just try.

Profile BilBg
Volunteer tester
Avatar
Send message
Joined: 27 May 07
Posts: 2787
Credit: 6,294,300
RAC: 7,629
Bulgaria
Message 1305977 - Posted: 14 Nov 2012, 3:35:06 UTC - in response to Message 1305969.



<cmdline>-period_iterations_num 20 -instances_per_device 2</cmdline>
<coproc>
<type>ATI</type>
<count>0.5</count>
</coproc>


____________



- ALF - "Find out what you don't do well ..... then don't do it!" :)

Alec
Send message
Joined: 3 Jun 06
Posts: 10
Credit: 816,773
RAC: 0
United States
Message 1305980 - Posted: 14 Nov 2012, 3:51:22 UTC
Last modified: 14 Nov 2012, 4:06:11 UTC

Thank you, trying these things now. Just discovered that the second card drops me to 1.1 PCI-e 8x on both slots (one card gets 16x 2.0, two gets 1.1 8x each) if that affects anything.

I'm not running CPU tasks; those aborts are probably from previous mucking about with the machine.

Back in a bit.

EDIT: Changing instances per device to 2 did the trick. Benchmarking now to see if this is the best use of the system.

I think I'm swearing off of cheap DDR-2 systems on Craig's List.
____________

Profile BilBg
Volunteer tester
Avatar
Send message
Joined: 27 May 07
Posts: 2787
Credit: 6,294,300
RAC: 7,629
Bulgaria
Message 1306128 - Posted: 14 Nov 2012, 16:51:50 UTC - in response to Message 1305980.

Benchmarking now to see if this is the best use of the system.


Do you use this?:
http://setiathome.berkeley.edu/forum_thread.php?id=69136&postid=1300787#1300787


____________



- ALF - "Find out what you don't do well ..... then don't do it!" :)

Message boards : Number crunching : Two ATI 7750s, Count 0.5, Four Active Tasks, Only Two Progressing?

Copyright © 2014 University of California