Questions and Answers :
GPU applications :
CUDA GPU workunits -- processing errors
Message board moderation
Author | Message |
---|---|
Jim Wright Send message Joined: 3 Sep 99 Posts: 36 Credit: 54,761,763 RAC: 17 |
I've noticed that quite a few of the CUDA workunits sent to me have unsuccessfull completion (computation error). Is it the code or my hardware? The display(s) and Windows/7 are not complaining of any problems. The unit is "NVIDIA GeForce GTX 465". Thx, Jim Wright |
arkayn Send message Joined: 14 May 99 Posts: 4438 Credit: 55,006,323 RAC: 0 |
I've noticed that quite a few of the CUDA workunits sent to me have unsuccessfull completion (computation error). Is it the code or my hardware? Look up info on the CUDA sleep bug that is in 295.xx and 296.xx. |
Jim Wright Send message Joined: 3 Sep 99 Posts: 36 Credit: 54,761,763 RAC: 17 |
I have updated the firmware to 296.xx and the errors continue. Is there some way to turn off the process of sending CUDA workunits to my machine? Seems it is just a waste of (a lot of stuff) to continue receiving them and then having them all fail. Thanks, Jim Wright |
arkayn Send message Joined: 14 May 99 Posts: 4438 Credit: 55,006,323 RAC: 0 |
I have updated the firmware to 296.xx and the errors continue. Turn off monitor sleep and manually turn off your monitors and the errors will stop. |
BilBg Send message Joined: 27 May 07 Posts: 3720 Credit: 9,385,827 RAC: 0 |
At the top-left there is search box. Put the following words in it to find how well this bug is known: sleep bug  - ALF - "Find out what you don't do well ..... then don't do it!" :)  |
Check6 Send message Joined: 23 Dec 00 Posts: 9 Credit: 4,087,762 RAC: 0 |
I had the same prob. I am running W7-64bit, nVidia GTX 470. Had the prob with driver package from nVidia 296.10. Removed and installed 280.26 and the prob went away. Tried that twice just to make sure. There seems to be a prob with 296.10 as far as the 400 series of vid cards, at least. I hope this helps. In years past this sort of prob often popped up. That's why I always keep the last two revisions of a driver package. Saves having to dnload them again in case of probs. This is the first that I've heard of the "sleep bug" but it sounds like the culprit. D |
Check6 Send message Joined: 23 Dec 00 Posts: 9 Credit: 4,087,762 RAC: 0 |
Thx. Just dnloaded the 301 beta and will give it a try. Driver 301 seems to work fine but is slower than 280. Milkyway@home nVidia increased from 4'50" to over 7' for completion. That's 2.5 minutes for those work units. Unacceptable. Think that I'll go back to the 280 drivers for now. |
Meerkat Send message Joined: 26 May 99 Posts: 9 Credit: 3,740,031 RAC: 8 |
G'Day all from DownUnder! Unbeknownst to me, the GPU has apparently been kicking out lots of errors... Rig is a Win 7 x64 with two nVidia 560Ti in SLi, 16GB DDR3 and all top notch components. Have been a SETI partecipant since 1999 and have never had any dramas, till some guy from the US messaged me the other day saying my cards send lots of errors and have a serious problem! How does he know... is beyond me; why would he care... same! Sure, none of us wants to be a nuisance for the project, but I would have thought the system would have alerted me directly if there was anything untoward. Now, my machine is in tip top shape and also used to play some serious graphics intensive, latest gen video games (not at the same time as crunching). The nVidia cards are always run on the latest stable driver available and never BSOD, freeze or frame dropped anywhere. Hibernation is physically turned off (elevated DOS prompt > powercfg -h off) and the power scheme is "High Performance" with sleep disabled. So now this guy got my attention... I have a look at my results and find most of my CUDA Fermi WU are inconclusive or computational error. Most errors appear to be "-9" (result overflow?) or some other triplets result exceeding the max allowed by the CUDA application; so not sure it actually is a graphics card problem. Nevertheless, I resorted to come out here and ask the question, to see whether I could really be harming the project and there is something I can do about it. Any help clarifying this issue would be highly appreciated. Cheers Paul Meerkat |
arkayn Send message Joined: 14 May 99 Posts: 4438 Credit: 55,006,323 RAC: 0 |
G'Day all from DownUnder! The reason the person knows is he is paired up with you on a work unit and saw the excessive inconclusives. The -12 errors are not a problem with your card so they can be dismissed. All the -9 errors are usually caused by slightly too low voltage that were factory set. The cards run fine for games, but cause errors when running full out. This thread has some good info in it. http://setiathome.ssl.berkeley.edu/sah/forum_thread.php?id=65894&sort=5 |
Meerkat Send message Joined: 26 May 99 Posts: 9 Credit: 3,740,031 RAC: 8 |
Thanks, done a little reading and a little tweaking over the past couple days. I have separated the two cards in AfterBurner, so I can tweak the settings separately as they are not the exact same. I raised the voltage ever so slightly and lowered considerably all three clocks (Core, Shader and Memory) and raised the fan slightly thus reducing the top temp during 97% GPU usage. It seems that most of the errors have disappeared since the first tweak was applied a couple days ago; now can only wait to see what result the latest 1100 odd pending WU will return. One thing I must disagree with is the assumption that the cards do not run full steam when playing games: trust me, when you are in Battlefield 3 - with the highest details settings on - the fans go full speed and the cards are both running flat tack, the heat from the 200mm exhaust fans can be felt; so, if there are no errors then, I do not believe the cards are responsible. As a further comparison, I looked at Einstein@Home which also uses CUDA: never any errors at all... so I am afraid the common denominator here is either SETI app or the CUDA implementation with these particular cards. Happy to be proven wrong. |
BilBg Send message Joined: 27 May 07 Posts: 3720 Credit: 9,385,827 RAC: 0 |
One thing I must disagree with is the assumption that the cards do not run full steam when playing games ... 1) You can't be sure that a game loads all the computing parts of the GPU all the time (you can 'run full steam' jumping on one leg, you will sweat if you do that for a long time but one leg will be 'idle') 2) Games can tolerate GPU computing errors (wrong bits), all that may happen is some pixel with wrong color or other small intermittent glitch for a split second. 3) SETI CUDA app try to use all the computing units (shaders) (this happens especially with VHARs, the computation is highly parallel) and need mathematically accurate results. (of course SETI (and all CUDA apps) do not use some parts of the GPU, e.g. texturing units, video decoder, ...) - Get OCCT and test your GPU for errors (at previous settings (MHz, V) with No BOINC running, use several 'Shader Complexity' values to find the 'best'): http://www.ocbase.com/ For me the older version OCCT 3.1.0 gives much higher temp (on AMD Radeon HD 6570): Get OCCTPT3.1.0.zip from here (I checked - the file is the same that I have (25.05.2011) from the original site when this was the latest version): https://sites.google.com/site/techtdsn/tools P.S. a) GeForce GTX 560 Ti is 'famous' here for making CUDA errors if run at high MHz but low V (as most of the early factory OC versions). One of the threads on the subject: http://setiathome.berkeley.edu/forum_thread.php?id=66124 b) If you 'promise' ;) to visit forums often (at least once a month) and Subscribe to this thread: http://setiathome.berkeley.edu/forum_thread.php?id=53611 ... you can get the Optimized Applications and have faster processing (on CPU 150-200%) and less errors on GPU: http://lunatics.kwsn.net/index.php?module=Downloads;catd=9 (you will need 'Installer v0.40 64 bit') The Optimized Applications will not update automatically so you have to visit the forums to check for newer versions (e.g. when SETI@home v7 replaces SETI@home v6). Â - ALF - "Find out what you don't do well ..... then don't do it!" :) Â |
Meerkat Send message Joined: 26 May 99 Posts: 9 Credit: 3,740,031 RAC: 8 |
Done all that, thanks. Now will need to watch those results and see what happens. Cheers Paul |
Meerkat Send message Joined: 26 May 99 Posts: 9 Credit: 3,740,031 RAC: 8 |
While I am on this, I may as well ask a seemingly silly question that has been bugging me... Why is it that SETI@Home only uses one graphics card?!? It does seem a real waste that, although there are two identical 560Ti, linked in SLi, recognised by the pc as such and equally accessed (with great results) by all high end video games, SETI@Home routines are always utilising the one and same card (#2)? Sure there must be a relatively simple way of getting the application to either share the unit load between the two GPUs or running two units at the same time, to avoid stressing and heating up only one card... Thanks for the explanation, anyone! |
OzzFan Send message Joined: 9 Apr 02 Posts: 15691 Credit: 84,761,841 RAC: 28 |
You can actually create a configuration file to make BOINC recognize all GPU cards in a system. Once BOINC recognizes all GPUs, the projects can then assign tasks to each GPU. Personally, I would like to see a graphical interface option as easy as checking a box to use all GPUs, or even better make a detection routine to see if there's more than one GPU and to start using it if the user has "Use GPUs" set in their preferences. Requiring users to create a special configuration file is not exactly user friendly. |
Jord Send message Joined: 9 Jun 99 Posts: 15184 Credit: 4,362,181 RAC: 3 |
two identical 560Ti BOINC will by default use the best GPU. If these two 560Ti's are really identical, BOINC will by default use both of them. However, the actual selection takes place based on 1) compute capability; 2) CUDA version; 3) available memory and 4) speed. If any of these differ between the two 560Ti's then the one with the least values will be considered lesser than the first, and will not be used by default. You can see these when you start up BOINC, in the event log it'll show per GPU what the values of these criteria are. And else, always use the cc_config.xml file with these lines in it: <cc_config> <options> <use_all_gpus>1</use_all_gpus> </options> </cc_config> |
Meerkat Send message Joined: 26 May 99 Posts: 9 Credit: 3,740,031 RAC: 8 |
Thanks so much for the always great replies! Here it goes: the two cards are admittedly different, but only in make and model number, while they are identical in specs: The only difference is the BIOS version, and to be honest, although I have a sound computer hardware knowledge and build experience, I am not prepared to flash a video card BIOS just yet. Also, by using MSI AfterBurner I am forcing both cards to identical settings: following many reports that these 560Ti needed to be tweaked down in MHz and up in Voltage, as you can see from the pic, I have done just that and hence resolved most if not all of my unit "errors". As you can see on AfterBurner, the usage is only on GPU2: Interestingly, I have twice set the Phys-X card settings in NVIDIA Control Panel to "Auto", which defaults to GPU1; but every time I reboot, the Phys-X settings return to GPU2. Not sure what that really means. This is the BOINC Log, from which it seems the choice of one GPU may not be necessarily the best... is that possible? GPU(1) is not used by has little more memory available and has slightly higher GFLOPS capability... Lastly, I have searched the entire computer for the "cc_config.xml" file with no luck. Since I am now using the Lunatics optimised apps, should I not have found one already there, or I may still have to create one? Thanks again for your help, I will wait for your replies before attempting to create a dangerous config file... ;-) |
OzzFan Send message Joined: 9 Apr 02 Posts: 15691 Credit: 84,761,841 RAC: 28 |
The Lunatics optimized apps creates a "app_info.xml" file. The Core Client Configuration file "cc_config.xml" is never created by default and must always be manually created - and has nothing to do with the Lunatics optimized apps and therefore not created by their installer. In other words, you'll have to create one on your own. |
Jord Send message Joined: 9 Jun 99 Posts: 15184 Credit: 4,362,181 RAC: 3 |
GPU(1) is not used by has little more memory available and has slightly higher GFLOPS capability... According to that (and by the way, you can just copy and paste the log, no need to make a screen shot of it), your numbers are: NVIDIA GPU 0: GeForce GTX 560 Ti (driver version 304.48, CUDA version 5.0, compute capability 2.1, 1024MB, 8381331MB available, 1263 GFLOPS peak) NVIDIA GPU 1: GeForce GTX 560 Ti (driver version 304.48, CUDA version 5.0, compute capability 2.1, 1024MB, 915MB available, 1382 GFLOPS peak) The higher available memory calculation (which is a bug in BOINC) on the first GPU comes before the higher GFlops value of the second, therefore the second isn't used. You can't have 8381331MB available out of 1024MB though, so you've got hit by a bug! This bug is fixed in a later BOINC version, still in testing (7.0.31, see post 44713 in the Change Log thread for links). |
Nitin Puri Send message Joined: 24 Jul 99 Posts: 10 Credit: 2,574,735 RAC: 1 |
Hi All, having this problem now off and on. Computational error after error. Goes away by itself and comes back apparently randomly. My config is: LUCIFER-PC ---------------------------------------------------------------- [Current Computer] Computer Name: LUCIFER-PC Computer Brand Name: GIGABYTE X58A-UD7 [Operating System] Operating System: Microsoft Windows 7 Ultimate (x64) Build 7601 Service Pack: Service Pack 1 Central Processor(s) ------------------------------------------------------ [CPU Unit Count] Number Of Processor Packages (Physical): 1 Number Of Processors Cores: 6 Number Of Logical Processors: 12 Intel Core i7-980X -------------------------------------------------------- [General Information] Processor Name: Intel Core i7-980X Original Processor Frequency: 3333.3 MHz Original Processor Frequency [MHz]: 3333 CPU ID: 000206C2 CPU Brand Name: Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz CPU Vendor: GenuineIntel CPU Stepping: B1 CPU Code Name: Gulftown CPU S-Spec: SLBUZ CPU Thermal Design Power (TDP): 300.0 W CPU Thermal Design Current (TDC): 280.0 A CPU Type: Production Unit CPU Platform: Socket B1 (LGA1366 FC-LGA6) Microcode Update Revision: F Number of CPU Cores: 6 Number of Logical CPUs: 12 [Operating Points] CPU LFM (Minimum): 1600.0 MHz = 12.00 x 133.3 MHz CPU HFM (Maximum): 3333.3 MHz = 25.00 x 133.3 MHz CPU Turbo: 3600.0 MHz = 27.00 x 133.3 MHz [Unlocked] CPU Current: 3508.1 MHz = 26.00 x 134.9 MHz Uncore Current: 2698.5 MHz = 20.00 x 134.9 MHz CPU Bus Type: Intel QuickPath Interconnect (QPI) v1.0 Number of QPI Links per CPU: 1 Maximum Supported QPI Link Clock: 3200 MHz (6.40 GT/s) [Unlimited] Current QPI Link Clock: 3238 MHz (6.48 GT/s) [Cache and TLB] L1 Cache: Instruction: 6 x 32 KBytes, Data: 6 x 32 KBytes L2 Cache: Integrated: 6 x 256 KBytes L3 Cache: 12 MBytes Instruction TLB: 2MB/4MB Pages, Fully associative, 7 entries Data TLB: 4 KB Pages, 4-way set associative, 64 entries [Standard Feature Flags] FPU on Chip Present Enhanced Virtual-86 Mode Present I/O Breakpoints Present Page Size Extensions Present Time Stamp Counter Present Pentium-style Model Specific Registers Present Physical Address Extension Present Machine Check Exception Present CMPXCHG8B Instruction Present APIC On Chip / PGE (AMD) Present Fast System Call Present Memory Type Range Registers Present Page Global Feature Present Machine Check Architecture Present CMOV Instruction Present Page Attribute Table Present 36-bit Page Size Extensions Present Processor Number Not Present CLFLUSH Instruction Present Debug Trace and EMON Store Present Internal ACPI Support Present MMX Technology Present Fast FP Save/Restore (IA MMX-2) Present Streaming SIMD Extensions Present Streaming SIMD Extensions 2 Present Self-Snoop Present Multi-Threading Capable Present Automatic Clock Control Present IA-64 Processor Not Present Signal Break on FERR Present Streaming SIMD Extensions 3 Present Carryless Multiplication (PCLMULQDQ)/GFMUL Present 64-Bit Debug Store Present MONITOR/MWAIT Support Present CPL Qualified Debug Store Present Virtual Machine Extensions Present Safer Mode Extensions (Intel TXT) Not Present Thermal Monitor 2 Present Supplemental Streaming SIMD Extensions 3 Present Enhanced SpeedStep Technology Present L1 Context ID Not Present Segment Limit Checking Not Present Fused Multiply Add Not Present CMPXCHG16B Support Present Send Task Priority Messages Disabling Present Performance/Debug Capability MSR Present Processor Context ID Present Direct Cache Access Not Present Streaming SIMD Extensions 4.1 Present Streaming SIMD Extensions 4.2 Present Extended xAPIC Not Present MOVBE Instruction Not Present POPCNT Instruction Present TSC-deadline Timer Not Present AES Cryptography Support Present XSAVE/XRSTOR/XSETBV/XGETBV Instructions Not Present XGETBV/XSETBV OS Enabled Not Present AVX Support Not Present Float16 Instructions Not Present Random Number Read Instruction Not Present [Extended Feature Flags] 64-bit Extensions Present RDTSCP and TSC_AUX Support Present 1 GB large page support Present No Execute Present SYSCALL/SYSRET Support Present Read/Write FS/GS Base Instructions Not Present TSC_THREAD_OFFSET Not Present Bit Manipulation Instructions Set 1 Not Present Hardware Lock Elision Not Present AVX2 Instructions Not Present Supervisor Mode Execution Protection Not Present Bit Manipulation Instructions Set 2 Not Present Enhanced Performance String Instruction Not Present INVPCID Not Present RTM Not Present RDSEED Instruction Not Present Multi-precision Add Carry Instructions Not Present [Enhanced Features] Thermal Monitor 1: Supported, Enabled Thermal Monitor 2: Supported, Enabled Enhanced Intel SpeedStep (GV3): Supported, Enabled Bi-directional PROCHOT#: Enabled Extended Auto-HALT State C1E: Enabled Extended Stop Grant State C2E: N/A Enhanced Halt State C3E: N/A Enhanced Halt State C4E: N/A Enhanced Halt State Hard C4E: N/A Hardware Prefetcher: Not Supported DCU Prefetcher: Not Supported IP Prefetcher: Not Supported Adjacent Cache Line Prefetch: Not Supported MLC Streamer Prefetcher Supported, Enabled MLC Spatial Prefetcher Supported, Enabled DCU Streamer Prefetcher Supported, Enabled DCU IP Prefetcher Supported, Enabled Intel Dynamic Acceleration (IDA) Technology: Not Supported Intel Dynamic FSB Switching: Not Supported Enhanced Multi Threaded Thermal Management: N/A Intel Turbo Boost Technology: Supported, Enabled Programmabe Ratio Limits: Supported, Disabled Programmabe TDC/TDP Limits: Supported, Disabled [Memory Ranges] Maximum Physical Address Size: 36-bit (64 GBytes) Maximum Virtual Address Size: 48-bit (256 TBytes) [MTRRs] Range 0-400000000 (0MB-16384MB) Type: Write Back (WB) Range D0000000-E0000000 (3328MB-3584MB) Type: Uncacheable (UC) Range E0000000-100000000 (3584MB-4096MB) Type: Uncacheable (UC) Range 330000000-340000000 (13056MB-13312MB) Type: Uncacheable (UC) Motherboard --------------------------------------------------------------- [Computer] Computer Brand Name: GIGABYTE X58A-UD7 [Motherboard] Motherboard Model: GIGABYTE X58A-UD7 Motherboard Chipset: Intel X58 (Tylersburg 36S) + ICH10R Motherboard Slots: 1xPCI, 4xPCI Express x1, 1xPCI Express x2, 2xPCI Express x16 PCI Express Version Supported: v2.0 USB Version Supported: v3.0 [ICH10 Features] Intel AMT Support: Not Supported SATA RAID 0/1/5/10: Supported [BIOS] BIOS Manufacturer: Award Modular BIOS v6.00PG BIOS Date: 08/24/10 BIOS Version: FB EFI BIOS: Not Capable Super-IO/LPC Chip: ITE IT8720F ACPI Devices -------------------------------------------------------------- ACPI Fixed Feature Button ------------------------------------------------- Device Name: ACPI Fixed Feature Button Intel Processor ----------------------------------------------------------- Device Name: Intel Processor Intel Processor ----------------------------------------------------------- Device Name: Intel Processor Intel Processor ----------------------------------------------------------- Device Name: Intel Processor Intel Processor ----------------------------------------------------------- Device Name: Intel Processor Intel Processor ----------------------------------------------------------- Device Name: Intel Processor Intel Processor ----------------------------------------------------------- Device Name: Intel Processor Intel Processor ----------------------------------------------------------- Device Name: Intel Processor Intel Processor ----------------------------------------------------------- Device Name: Intel Processor Intel Processor ----------------------------------------------------------- Device Name: Intel Processor Intel Processor ----------------------------------------------------------- Device Name: Intel Processor Intel Processor ----------------------------------------------------------- Device Name: Intel Processor Intel Processor ----------------------------------------------------------- Device Name: Intel Processor Intel(R) 82802 Firmware Hub Device ---------------------------------------- Device Name: Intel(R) 82802 Firmware Hub Device [Assigned Resources] Memory Location: FFB80000 - FFBFFFFF [Alternative 1] Memory Location: FFB80000 - FFBFFFFF Programmable interrupt controller ----------------------------------------- Device Name: Programmable interrupt controller [Assigned Resources] I/O Port: 0020 - 0021 IRQ: 65792 [Alternative 1] I/O Port: 0020 - 0021 I/O Port: 00A0 - 00A1 System timer -------------------------------------------------------------- Device Name: System timer [Assigned Resources] I/O Port: 0040 - 0043 [Alternative 1] I/O Port: 0040 - 0043 High precision event timer ------------------------------------------------ Device Name: High precision event timer [Assigned Resources] IRQ: 0 [Alternative 1] Memory Location: FED00000 - FED003FF IRQ: 0 IRQ: 8 Direct memory access controller ------------------------------------------- Device Name: Direct memory access controller [Assigned Resources] DMA: 4 [Alternative 1] I/O Port: 0000 - 000F I/O Port: 0080 - 0090 I/O Port: 0094 - 009F I/O Port: 00C0 - 00DF DMA: 4 System speaker ------------------------------------------------------------ Device Name: System speaker [Assigned Resources] I/O Port: 0061 [Alternative 1] I/O Port: 0061 PCI bus ------------------------------------------------------------------- Device Name: PCI bus [Assigned Resources] I/O Port: 0D00 - FFFF Memory Location: 000C0000 - 000BFFFF [Alternative 1] I/O Port: 0000 - 0CF7 I/O Port: 0D00 - FFFF Memory Location: 000A0000 - 000BFFFF Memory Location: 000C0000 - 000DFFFF Memory Location: CFEF0000 - FEBFFFFF System CMOS/real time clock ----------------------------------------------- Device Name: System CMOS/real time clock [Assigned Resources] I/O Port: 0070 - 0073 [Alternative 1] I/O Port: 0070 - 0073 System board -------------------------------------------------------------- Device Name: System board [Assigned Resources] Memory Location: 000CDA00 - 000CFFFF Memory Location: CFED0000 - CFEDFFFF Memory Location: FEC00000 - FEC00FFF [Alternative 1] Memory Location: 000CDA00 - 000CFFFF Memory Location: 000F0000 - 000F7FFF Memory Location: 000F8000 - 000FBFFF Memory Location: 000FC000 - 000FFFFF Memory Location: CFED0000 - CFEDFFFF Memory Location: 00000000 - 0009FFFF Memory Location: 00100000 - CFECFFFF Memory Location: CFEE0000 - CFEFFFFF Memory Location: FEC00000 - FEC00FFF Memory Location: FED10000 - FED1DFFF Memory Location: FED20000 - FED8FFFF Memory Location: FEE00000 - FEE00FFF Memory Location: FFB00000 - FFB7FFFF Memory Location: FFF00000 - FFFFFFFF Memory Location: 000E0000 - 000EFFFF Motherboard resources ----------------------------------------------------- Device Name: Motherboard resources [Assigned Resources] I/O Port: 0010 - 001F I/O Port: 0065 - 006F I/O Port: 00E0 - 00EF IRQ: 1114369 [Alternative 1] I/O Port: 0010 - 001F I/O Port: 0022 - 003F I/O Port: 0044 - 005F I/O Port: 0062 - 0063 I/O Port: 0065 - 006F I/O Port: 0074 - 007F I/O Port: 0091 - 0093 I/O Port: 00A2 - 00BF I/O Port: 00E0 - 00EF I/O Port: 04D0 - 04D1 I/O Port: 0290 - 029F I/O Port: 0800 - 087F I/O Port: 0290 - 0294 I/O Port: 0880 - 088F Motherboard resources ----------------------------------------------------- Device Name: Motherboard resources [Assigned Resources] I/O Port: 0400 - 047F [Alternative 1] I/O Port: 0400 - 047F I/O Port: 0580 - 05FF Motherboard resources ----------------------------------------------------- Device Name: Motherboard resources [Assigned Resources] Memory Location: F0000000 - F3FFFFFF [Alternative 1] Memory Location: F0000000 - F3FFFFFF Numeric data processor ---------------------------------------------------- Device Name: Numeric data processor [Assigned Resources] I/O Port: 00F0 - 00FF [Alternative 1] I/O Port: 00F0 - 00FF IRQ: 13 ACPI Power Button --------------------------------------------------------- Device Name: ACPI Power Button Microsoft Windows Management Interface for ACPI --------------------------- Device Name: Microsoft Windows Management Interface for ACPI SMBIOS DMI ---------------------------------------------------------------- BIOS ---------------------------------------------------------------------- BIOS Vendor: Award Software International, Inc. BIOS Version: FB BIOS Release Date: 08/24/2010 BIOS Start Segment: E000 BIOS Size: 2048 KBytes ISA Support: Not Present MCA Support: Not Present EISA Support: Not Present PCI Support: Present PC Card (PCMCIA) Support: Not Present Plug-and-Play Support: Present APM Support: Not Present Flash BIOS: Present BIOS Shadow: Present VL-VESA Support: Not Present ESCD Support: Not Present Boot from CD: Present Selectable Boot: Present BIOS ROM Socketed: Not Present Boot from PC Card: Not Present EDD Support: Present NEC PC-98 Support: Not Present ACPI Support: Present USB Legacy Support: Present AGP Support: Not Present I2O Boot Support: Not Present LS-120 Boot Support: Present ATAPI ZIP Drive Boot Support: Present IEE1394 Boot Support: Not Present Smart Battery Support: Not Present BIOS Boot Specification Support: Present Function key-initiated Network Service Boot Support: Not Present Targeted Content Distribution Support: Present UEFI Specification Support: Not Present System -------------------------------------------------------------------- System Manufacturer: Gigabyte Technology Co., Ltd. Product Name: X58A-UD7 Product Version: Product Serial Number: SKU Number: Family: Mainboard ----------------------------------------------------------------- Mainboard Manufacturer: Gigabyte Technology Co., Ltd. Mainboard Name: X58A-UD7 Mainboard Version: x.x Mainboard Serial Number: System Enclosure ---------------------------------------------------------- Manufacturer: Gigabyte Technology Co., Ltd. Case Type: Desktop Version: Serial Number: Asset Tag Number: Processor ----------------------------------------------------------------- Processor Manufacturer: Intel Processor Version: Intel(R) Core(TM) i7 CPU External Clock: 133 MHz Maximum Clock Supported: 4000 MHz Current Clock: 3466 MHz CPU Socket: Populated CPU Status: Enabled Processor Type: Central Processor Processor Voltage: 0.7 V Processor Upgrade: Socket 478 Socket Designation: Socket 1366 Memory Devices ------------------------------------------------------------ Memory Controller --------------------------------------------------------- Error Detecting Method: 8-bit Parity Error Correction: None Supported Interleave: 1-Way Current Interleave: 1-Way Max. Memory Module Size: 1024 MBytes Supported Memory Speed: Supported Memory Type: Supported Memory Voltage: 5 V Associated Memory Slots: 6 A0 ------------------------------------------------------------------------ Socket Designation: A0 Memory Type: Memory Speed: Unknown Installed size: 2048 MBytes Enabled size: 2048 MBytes A1 ------------------------------------------------------------------------ Socket Designation: A1 Memory Type: Memory Speed: Unknown Installed size: 2048 MBytes Enabled size: 2048 MBytes A2 ------------------------------------------------------------------------ Socket Designation: A2 Memory Type: Memory Speed: Unknown Installed size: 2048 MBytes Enabled size: 2048 MBytes A3 ------------------------------------------------------------------------ Socket Designation: A3 Memory Type: Memory Speed: Unknown Installed size: 2048 MBytes Enabled size: 2048 MBytes A4 ------------------------------------------------------------------------ Socket Designation: A4 Memory Type: Memory Speed: Unknown Installed size: 2048 MBytes Enabled size: 2048 MBytes A5 ------------------------------------------------------------------------ Socket Designation: A5 Memory Type: Memory Speed: Unknown Installed size: 2048 MBytes Enabled size: 2048 MBytes Internal Cache ------------------------------------------------------------ Socket Designation: Internal Cache Cache State: Enabled Cache Type: Internal Cache Scheme: Write-Back Supported SRAM Type: Synchronous Current SRAM Type: Synchronous Cache Speed: Unknown Error Correction Type: Unknown Maximum Cache Size: 64 KBytes Installed Cache Size: 64 KBytes Cache Associativity: Unknown External Cache ------------------------------------------------------------ Socket Designation: External Cache Cache State: Enabled Cache Type: Internal Cache Scheme: Write-Back Supported SRAM Type: Synchronous Current SRAM Type: Synchronous Cache Speed: Unknown Error Correction Type: Unknown Maximum Cache Size: 2048 KBytes Installed Cache Size: 12288 KBytes Cache Associativity: Unknown Port Connectors ----------------------------------------------------------- Port Connector ------------------------------------------------------------ Port Type: Unknown Internal Reference: PRIMARY IDE Internal Connector Type: On Board IDE External Reference: External Connector Type: None 8251 FIFO Compatible ------------------------------------------------------ Port Type: 8251 FIFO Compatible Internal Reference: FDD Internal Connector Type: On Board Floppy External Reference: External Connector Type: None Keyboard Port ------------------------------------------------------------- Port Type: Keyboard Port Internal Reference: Keyboard Internal Connector Type: Unknown External Reference: External Connector Type: PS/2 Mouse Port ---------------------------------------------------------------- Port Type: Mouse Port Internal Reference: PS/2 Mouse Internal Connector Type: PS/2 External Reference: No Detected External Connector Type: PS/2 USB ----------------------------------------------------------------------- Port Type: USB Internal Reference: USB Internal Connector Type: None External Reference: External Connector Type: Access Bus (USB) USB ----------------------------------------------------------------------- Port Type: USB Internal Reference: USB Internal Connector Type: None External Reference: External Connector Type: Access Bus (USB) System Slots -------------------------------------------------------------- PCI ----------------------------------------------------------------------- Slot Designation: PCI Slot Type: PCI Slot Usage: Empty Slot Data Bus Width: 32-bit Slot Length: Long BIOS Language ------------------------------------------------------------- Physical Memory Array ----------------------------------------------------- Array Location: System board Array Use: System memory Error Detecting Method: None Memory Capacity: 50331648 KBytes Memory Devices: 6 Memory Device ------------------------------------------------------------- Total Width: 256 bits Data Width: 196 bits Device Size: 2048 MBytes Device Form Factor: DIMM Device Locator: A0 Bank Locator: Bank0/1 Device Type: Unknown Device Type Detail: Memory Speed: 400 MHz Manufacturer: Serial Number: Part Number: Asset Tag: Memory Device ------------------------------------------------------------- Total Width: 256 bits Data Width: 196 bits Device Size: 2048 MBytes Device Form Factor: DIMM Device Locator: A1 Bank Locator: Bank2/3 Device Type: Unknown Device Type Detail: Memory Speed: 400 MHz Manufacturer: Serial Number: Part Number: Asset Tag: Memory Device ------------------------------------------------------------- Total Width: 256 bits Data Width: 196 bits Device Size: 2048 MBytes Device Form Factor: DIMM Device Locator: A2 Bank Locator: Bank4/5 Device Type: Unknown Device Type Detail: Memory Speed: 400 MHz Manufacturer: Serial Number: Part Number: Asset Tag: Memory Device ------------------------------------------------------------- Total Width: 256 bits Data Width: 196 bits Device Size: 2048 MBytes Device Form Factor: DIMM Device Locator: A3 Bank Locator: Bank6/7 Device Type: Unknown Device Type Detail: Memory Speed: 400 MHz Manufacturer: Serial Number: Part Number: Asset Tag: Memory Device ------------------------------------------------------------- Total Width: 256 bits Data Width: 196 bits Device Size: 2048 MBytes Device Form Factor: DIMM Device Locator: A4 Bank Locator: Bank8/9 Device Type: Unknown Device Type Detail: Memory Speed: 400 MHz Manufacturer: Serial Number: Part Number: Asset Tag: Memory Device ------------------------------------------------------------- Total Width: 256 bits Data Width: 196 bits Device Size: 2048 MBytes Device Form Factor: DIMM Device Locator: A5 Bank Locator: Bank10/11 Device Type: Unknown Device Type Detail: Memory Speed: 400 MHz Manufacturer: Serial Number: Part Number: Asset Tag: Memory Array Mapped Address ----------------------------------------------- Starting Address: 00000000 Ending Address: 00BFFFFF Partition Width: 1 Memory Device Mapped Address ---------------------------------------------- Starting Address: 00000000 Ending Address: 001FFFFF Partition Row Position: 1 Interleave Position: Non-interleaved Interleave Data Depth: 0 Memory Device Mapped Address ---------------------------------------------- Starting Address: 00200000 Ending Address: 003FFFFF Partition Row Position: 1 Interleave Position: Non-interleaved Interleave Data Depth: 0 Memory Device Mapped Address ---------------------------------------------- Starting Address: 00400000 Ending Address: 005FFFFF Partition Row Position: 1 Interleave Position: Non-interleaved Interleave Data Depth: 0 Memory Device Mapped Address ---------------------------------------------- Starting Address: 00600000 Ending Address: 007FFFFF Partition Row Position: 1 Interleave Position: Non-interleaved Interleave Data Depth: 0 Memory Device Mapped Address ---------------------------------------------- Starting Address: 00800000 Ending Address: 009FFFFF Partition Row Position: 1 Interleave Position: Non-interleaved Interleave Data Depth: 0 Memory Device Mapped Address ---------------------------------------------- Starting Address: 00A00000 Ending Address: 00BFFFFF Partition Row Position: 1 Interleave Position: Non-interleaved Interleave Data Depth: 0 System Boot Information --------------------------------------------------- Boot Status: No error occured Unknown ------------------------------------------------------------------- Memory -------------------------------------------------------------------- [General information] Total Memory Size: 12 GBytes Total Memory Size [MB]: 12288 [Current Performance Settings] Current Memory Clock: 674.6 MHz (5 : 1 ratio) Current Timing (tCAS-tRCD-tRP-tRAS): 9.0-9-9-24 Memory Runs At: Triple-Channel Command Rate: 2T Read to Read Delay (tRD_RD) Same Rank: 4T Read to Read Delay (tRD_RD) Different Rank: 6T Read to Read Delay (tRD_RD) Different DIMM: 7T Write to Write Delay (tWR_WR) Same Rank: 4T Write to Write Delay (tWR_WR) Different Rank: 7T Write to Write Delay (tWR_WR) Different DIMM: 7T Read to Write Delay (tRD_WR) Same Rank: 11T Read to Write Delay (tRD_WR) Different Rank: 10T Read to Write Delay (tRD_WR) Different DIMM: 10T Write to Read Delay (tWR_RD) Same Rank (tWTR): 16T Write to Read Delay (tWR_RD) Different Rank: 5T Write to Read Delay (tWR_RD) Different DIMM: 5T Read to Precharge Delay (tRTP): 5T Write to Precharge Delay (tWTP/tWR): 21T RAS# to RAS# Delay (tRRD): 5T Refresh Cycle Time (tRFC): 108T Four Activate Window (tFAW): 25T Row: 0 - 2048 MB PC3-10600 DDR3 SDRAM Corsair CM3X2G1333C9 ---------------- [General Module Information] Module Number: 0 Module Size: 2048 MBytes Memory Type: DDR3 SDRAM Module Type: Unbuffered DIMM (UDIMM) Memory Speed: 666.7 MHz (PC3-10600) Module Manufacturer: Corsair Module Part Number: CM3X2G1333C9 Module Revision: 0 Module Serial Number: 0 Module Manufacturing Date: Year: 2000, Week: 0 Module Manufacturing Location: 1 SDRAM Manufacturer: Unknown Error Check/Correction: None [Module characteristics] Row Address Bits: 15 Column Address Bits: 10 Number Of Banks: 8 Module Density: 2048 Mb Number Of Ranks: 1 Device Width: 8 bits Bus Width: 64 bits Module Nominal Voltage (VDD): 1.5 V [Module timing] Minimum SDRAM Cycle Time (tCKmin): 1.500 ns CAS# Latencies Supported: 6, 7, 8, 9 Minimum CAS# Latency Time (tAAmin): 13.500 ns Minimum RAS# to CAS# Delay (tRCDmin): 13.500 ns Minimum Row Precharge Time (tRPmin): 13.500 ns Minimum Active to Precharge Time (tRASmin): 36.000 ns Supported Module Timing at 666.7 MHz: 9-9-9-24 Supported Module Timing at 533.3 MHz: 8-8-8-20 Supported Module Timing at 400.0 MHz: 6-6-6-15 Minimum Write Recovery Time (tWRmin): 15.000 ns Minimum Row Active to Row Active Delay (tRRDmin): 7.500 ns Minimum Active to Active/Refresh Time (tRCmin): 50.625 ns Minimum Refresh Recovery Time Delay (tRFCmin): 160.000 ns Minimum Internal Write to Read Command Delay (tWTRmin): 7.500 ns Minimum Internal Read to Precharge Command Delay (tRTPmin): 7.500 ns Minimum Four Activate Window Delay Time (tFAWmin): 37.500 ns [Features] On-die Thermal Sensor (ODTS) Readout: Not Supported Auto Self Refresh (ASR): Not Supported Extended Temperature Refresh Rate: Not Supported Extended Temperature Range: Supported Module Temperature Sensor: Not Supported Module Nominal Height: 30 - 31 mm Module Maximum Thickness (Front): 2 - 3 mm Module Maximum Thickness (Back): 2 - 3 mm Row: 1 - 2048 MB PC3-10600 DDR3 SDRAM Corsair CM3X2G1333C9 ---------------- [General Module Information] Module Number: 1 Module Size: 2048 MBytes Memory Type: DDR3 SDRAM Module Type: Unbuffered DIMM (UDIMM) Memory Speed: 666.7 MHz (PC3-10600) Module Manufacturer: Corsair Module Part Number: CM3X2G1333C9 Module Revision: 0 Module Serial Number: 0 Module Manufacturing Date: Year: 2000, Week: 0 Module Manufacturing Location: 1 SDRAM Manufacturer: Unknown Error Check/Correction: None [Module characteristics] Row Address Bits: 15 Column Address Bits: 10 Number Of Banks: 8 Module Density: 2048 Mb Number Of Ranks: 1 Device Width: 8 bits Bus Width: 64 bits Module Nominal Voltage (VDD): 1.5 V [Module timing] Minimum SDRAM Cycle Time (tCKmin): 1.500 ns CAS# Latencies Supported: 6, 7, 8, 9 Minimum CAS# Latency Time (tAAmin): 13.500 ns Minimum RAS# to CAS# Delay (tRCDmin): 13.500 ns Minimum Row Precharge Time (tRPmin): 13.500 ns Minimum Active to Precharge Time (tRASmin): 36.000 ns Supported Module Timing at 666.7 MHz: 9-9-9-24 Supported Module Timing at 533.3 MHz: 8-8-8-20 Supported Module Timing at 400.0 MHz: 6-6-6-15 Minimum Write Recovery Time (tWRmin): 15.000 ns Minimum Row Active to Row Active Delay (tRRDmin): 7.500 ns Minimum Active to Active/Refresh Time (tRCmin): 50.625 ns Minimum Refresh Recovery Time Delay (tRFCmin): 160.000 ns Minimum Internal Write to Read Command Delay (tWTRmin): 7.500 ns Minimum Internal Read to Precharge Command Delay (tRTPmin): 7.500 ns Minimum Four Activate Window Delay Time (tFAWmin): 37.500 ns [Features] On-die Thermal Sensor (ODTS) Readout: Not Supported Auto Self Refresh (ASR): Not Supported Extended Temperature Refresh Rate: Not Supported Extended Temperature Range: Supported Module Temperature Sensor: Not Supported Module Nominal Height: 30 - 31 mm Module Maximum Thickness (Front): 2 - 3 mm Module Maximum Thickness (Back): 2 - 3 mm Row: 2 - 2048 MB PC3-10600 DDR3 SDRAM Corsair CM3X2G1333C9 ---------------- [General Module Information] Module Number: 2 Module Size: 2048 MBytes Memory Type: DDR3 SDRAM Module Type: Unbuffered DIMM (UDIMM) Memory Speed: 666.7 MHz (PC3-10600) Module Manufacturer: Corsair Module Part Number: CM3X2G1333C9 Module Revision: 0 Module Serial Number: 0 Module Manufacturing Date: Year: 2000, Week: 0 Module Manufacturing Location: 1 SDRAM Manufacturer: Unknown Error Check/Correction: None [Module characteristics] Row Address Bits: 15 Column Address Bits: 10 Number Of Banks: 8 Module Density: 2048 Mb Number Of Ranks: 1 Device Width: 8 bits Bus Width: 64 bits Module Nominal Voltage (VDD): 1.5 V [Module timing] Minimum SDRAM Cycle Time (tCKmin): 1.500 ns CAS# Latencies Supported: 6, 7, 8, 9 Minimum CAS# Latency Time (tAAmin): 13.500 ns Minimum RAS# to CAS# Delay (tRCDmin): 13.500 ns Minimum Row Precharge Time (tRPmin): 13.500 ns Minimum Active to Precharge Time (tRASmin): 36.000 ns Supported Module Timing at 666.7 MHz: 9-9-9-24 Supported Module Timing at 533.3 MHz: 8-8-8-20 Supported Module Timing at 400.0 MHz: 6-6-6-15 Minimum Write Recovery Time (tWRmin): 15.000 ns Minimum Row Active to Row Active Delay (tRRDmin): 7.500 ns Minimum Active to Active/Refresh Time (tRCmin): 50.625 ns Minimum Refresh Recovery Time Delay (tRFCmin): 160.000 ns Minimum Internal Write to Read Command Delay (tWTRmin): 7.500 ns Minimum Internal Read to Precharge Command Delay (tRTPmin): 7.500 ns Minimum Four Activate Window Delay Time (tFAWmin): 37.500 ns [Features] On-die Thermal Sensor (ODTS) Readout: Not Supported Auto Self Refresh (ASR): Not Supported Extended Temperature Refresh Rate: Not Supported Extended Temperature Range: Supported Module Temperature Sensor: Not Supported Module Nominal Height: 30 - 31 mm Module Maximum Thickness (Front): 2 - 3 mm Module Maximum Thickness (Back): 2 - 3 mm Row: 3 - 2048 MB PC3-10600 DDR3 SDRAM Corsair CM3X2G1333C9 ---------------- [General Module Information] Module Number: 3 Module Size: 2048 MBytes Memory Type: DDR3 SDRAM Module Type: Unbuffered DIMM (UDIMM) Memory Speed: 666.7 MHz (PC3-10600) Module Manufacturer: Corsair Module Part Number: CM3X2G1333C9 Module Revision: 0 Module Serial Number: 0 Module Manufacturing Date: Year: 2000, Week: 0 Module Manufacturing Location: 1 SDRAM Manufacturer: Unknown Error Check/Correction: None [Module characteristics] Row Address Bits: 15 Column Address Bits: 10 Number Of Banks: 8 Module Density: 2048 Mb Number Of Ranks: 1 Device Width: 8 bits Bus Width: 64 bits Module Nominal Voltage (VDD): 1.5 V [Module timing] Minimum SDRAM Cycle Time (tCKmin): 1.500 ns CAS# Latencies Supported: 6, 7, 8, 9 Minimum CAS# Latency Time (tAAmin): 13.500 ns Minimum RAS# to CAS# Delay (tRCDmin): 13.500 ns Minimum Row Precharge Time (tRPmin): 13.500 ns Minimum Active to Precharge Time (tRASmin): 36.000 ns Supported Module Timing at 666.7 MHz: 9-9-9-24 Supported Module Timing at 533.3 MHz: 8-8-8-20 Supported Module Timing at 400.0 MHz: 6-6-6-15 Minimum Write Recovery Time (tWRmin): 15.000 ns Minimum Row Active to Row Active Delay (tRRDmin): 7.500 ns Minimum Active to Active/Refresh Time (tRCmin): 50.625 ns Minimum Refresh Recovery Time Delay (tRFCmin): 160.000 ns Minimum Internal Write to Read Command Delay (tWTRmin): 7.500 ns Minimum Internal Read to Precharge Command Delay (tRTPmin): 7.500 ns Minimum Four Activate Window Delay Time (tFAWmin): 37.500 ns [Features] On-die Thermal Sensor (ODTS) Readout: Not Supported Auto Self Refresh (ASR): Not Supported Extended Temperature Refresh Rate: Not Supported Extended Temperature Range: Supported Module Temperature Sensor: Not Supported Module Nominal Height: 30 - 31 mm Module Maximum Thickness (Front): 2 - 3 mm Module Maximum Thickness (Back): 2 - 3 mm Row: 4 - 2048 MB PC3-10600 DDR3 SDRAM Corsair CM3X2G1333C9 ---------------- [General Module Information] Module Number: 4 Module Size: 2048 MBytes Memory Type: DDR3 SDRAM Module Type: Unbuffered DIMM (UDIMM) Memory Speed: 666.7 MHz (PC3-10600) Module Manufacturer: Corsair Module Part Number: CM3X2G1333C9 Module Revision: 0 Module Serial Number: 0 Module Manufacturing Date: Year: 2000, Week: 0 Module Manufacturing Location: 1 SDRAM Manufacturer: Unknown Error Check/Correction: None [Module characteristics] Row Address Bits: 15 Column Address Bits: 10 Number Of Banks: 8 Module Density: 2048 Mb Number Of Ranks: 1 Device Width: 8 bits Bus Width: 64 bits Module Nominal Voltage (VDD): 1.5 V [Module timing] Minimum SDRAM Cycle Time (tCKmin): 1.500 ns CAS# Latencies Supported: 6, 7, 8, 9 Minimum CAS# Latency Time (tAAmin): 13.500 ns Minimum RAS# to CAS# Delay (tRCDmin): 13.500 ns Minimum Row Precharge Time (tRPmin): 13.500 ns Minimum Active to Precharge Time (tRASmin): 36.000 ns Supported Module Timing at 666.7 MHz: 9-9-9-24 Supported Module Timing at 533.3 MHz: 8-8-8-20 Supported Module Timing at 400.0 MHz: 6-6-6-15 Minimum Write Recovery Time (tWRmin): 15.000 ns Minimum Row Active to Row Active Delay (tRRDmin): 7.500 ns Minimum Active to Active/Refresh Time (tRCmin): 50.625 ns Minimum Refresh Recovery Time Delay (tRFCmin): 160.000 ns Minimum Internal Write to Read Command Delay (tWTRmin): 7.500 ns Minimum Internal Read to Precharge Command Delay (tRTPmin): 7.500 ns Minimum Four Activate Window Delay Time (tFAWmin): 37.500 ns [Features] On-die Thermal Sensor (ODTS) Readout: Not Supported Auto Self Refresh (ASR): Not Supported Extended Temperature Refresh Rate: Not Supported Extended Temperature Range: Supported Module Temperature Sensor: Not Supported Module Nominal Height: 30 - 31 mm Module Maximum Thickness (Front): 2 - 3 mm Module Maximum Thickness (Back): 2 - 3 mm Row: 5 - 2048 MB PC3-10600 DDR3 SDRAM Corsair CM3X2G1333C9 ---------------- [General Module Information] Module Number: 5 Module Size: 2048 MBytes Memory Type: DDR3 SDRAM Module Type: Unbuffered DIMM (UDIMM) Memory Speed: 666.7 MHz (PC3-10600) Module Manufacturer: Corsair Module Part Number: CM3X2G1333C9 Module Revision: 0 Module Serial Number: 0 Module Manufacturing Date: Year: 2000, Week: 0 Module Manufacturing Location: 1 SDRAM Manufacturer: Unknown Error Check/Correction: None [Module characteristics] Row Address Bits: 15 Column Address Bits: 10 Number Of Banks: 8 Module Density: 2048 Mb Number Of Ranks: 1 Device Width: 8 bits Bus Width: 64 bits Module Nominal Voltage (VDD): 1.5 V [Module timing] Minimum SDRAM Cycle Time (tCKmin): 1.500 ns CAS# Latencies Supported: 6, 7, 8, 9 Minimum CAS# Latency Time (tAAmin): 13.500 ns Minimum RAS# to CAS# Delay (tRCDmin): 13.500 ns Minimum Row Precharge Time (tRPmin): 13.500 ns Minimum Active to Precharge Time (tRASmin): 36.000 ns Supported Module Timing at 666.7 MHz: 9-9-9-24 Supported Module Timing at 533.3 MHz: 8-8-8-20 Supported Module Timing at 400.0 MHz: 6-6-6-15 Minimum Write Recovery Time (tWRmin): 15.000 ns Minimum Row Active to Row Active Delay (tRRDmin): 7.500 ns Minimum Active to Active/Refresh Time (tRCmin): 50.625 ns Minimum Refresh Recovery Time Delay (tRFCmin): 160.000 ns Minimum Internal Write to Read Command Delay (tWTRmin): 7.500 ns Minimum Internal Read to Precharge Command Delay (tRTPmin): 7.500 ns Minimum Four Activate Window Delay Time (tFAWmin): 37.500 ns [Features] On-die Thermal Sensor (ODTS) Readout: Not Supported Auto Self Refresh (ASR): Not Supported Extended Temperature Refresh Rate: Not Supported Extended Temperature Range: Supported Module Temperature Sensor: Not Supported Module Nominal Height: 30 - 31 mm Module Maximum Thickness (Front): 2 - 3 mm Module Maximum Thickness (Back): 2 - 3 mm Bus ----------------------------------------------------------------------- PCI Bus #0 ---------------------------------------------------------------- Intel X58 Chipset - ESI Port [B3] ----------------------------------------- [General Information] Device Name: Intel X58 Chipset - ESI Port [B3] Original Device Name: Intel X58 Chipset - ESI Port [B3] Device Class: Host-to-PCI Bridge Revision ID: 13 Bus Number: 0 Device Number: 0 Function Number: 0 PCI Latency Timer: 0 Hardware ID: PCI\VEN_8086&DEV_3405&SUBSYS_50001458&REV_13 [PCI Express] Version: 2.0 Maximum Link Width: 4x Current Link Width: 4x Maximum Link Speed: 2.5 Gb/s Current Link Speed: 2.5 Gb/s Device/Port Type: Root Port of PCI Express Root Complex Slot Implemented: No Active State Power Management (ASPM) Support: L0s and L1 Active State Power Management (ASPM) Status: Disabled [System Resources] Interrupt Line: IRQ12 Interrupt Pin: INTA# [Features] Bus Mastering: Disabled Running At 66 MHz: Not Capable Fast Back-to-Back Transactions: Not Capable [Driver Information] Driver Manufacturer: Intel Driver Description: Intel(R) 5520/5500/X58 I/O Hub to ESI Port - 3405 Driver Provider: Intel Driver Version: 9.1.1.1026 Driver Date: 08-Feb-2010 DeviceInstanceId PCI\VEN_8086&DEV_3405&SUBSYS_50001458&REV_13\3&13C0B0C5&0&00 Intel 5520/5500/X58/7500 I/O Hub - PCI Express Root Port #2 (x2) ---------- [General Information] Device Name: Intel 5520/5500/X58/7500 I/O Hub - PCI Express Root Port #2 (x2) Original Device Name: Intel 5520/5500/X58/7500 I/O Hub - PCI Express Root Port #2 (x2) Device Class: PCI-to-PCI Bridge Revision ID: 13 Bus Number: 0 Device Number: 2 Function Number: 0 PCI Latency Timer: 0 Hardware ID: PCI\VEN_8086&DEV_3409&SUBSYS_00000000&REV_13 [PCI Express] Version: 2.0 Maximum Link Width: 2x Current Link Width: 1x Maximum Link Speed: 5.0 Gb/s Current Link Speed: 5.0 Gb/s Device/Port Type: Root Port of PCI Express Root Complex Slot Implemented: Yes Hot-Plug: Not Capable Hot-Plug Surprise: Not Capable Slot Power Limit: 10.000 W Active State Power Management (ASPM) Support: L0s and L1 Active State Power Management (ASPM) Status: Disabled [System Resources] Interrupt Line: IRQ16 Interrupt Pin: INTA# [Features] Bus Mastering: Enabled Running At 66 MHz: Not Capable Fast Back-to-Back Transactions: Not Capable [Driver Information] Driver Manufacturer: Intel Driver Description: Intel(R) 7500/5520/5500/X58 I/O Hub PCI Express Root Port 2 - 3409 Driver Provider: Intel Driver Version: 9.1.1.1026 Driver Date: 08-Feb-2010 DeviceInstanceId PCI\VEN_8086&DEV_3409&SUBSYS_50011458&REV_13\3&13C0B0C5&0&10 PCI Express x2 Bus #1 ----------------------------------------------------- NEC/Renesas Electronics uPD720200 USB 3.0 Host Controller ----------------- [General Information] Device Name: NEC/Renesas Electronics uPD720200 USB 3.0 Host Controller Original Device Name: NEC/Renesas Electronics uPD720200 USB 3.0 Host Controller Device Class: Universal Serial Bus (USB) Revision ID: 3 Bus Number: 1 Device Number: 0 Function Number: 0 PCI Latency Timer: 0 Hardware ID: PCI\VEN_1033&DEV_0194&SUBSYS_50071458&REV_03 [PCI Express] Version: 2.0 Maximum Link Width: 1x Current Link Width: 1x Maximum Link Speed: 5.0 Gb/s Current Link Speed: 5.0 Gb/s Device/Port Type: PCI Express Endpoint Slot Implemented: No Active State Power Management (ASPM) Support: L0s and L1 Active State Power Management (ASPM) Status: Disabled [System Resources] Interrupt Line: N/A Interrupt Pin: INTA# Memory Base Address 0 FBCFE000 [Features] Bus Mastering: Enabled Running At 66 MHz: Not Capable Fast Back-to-Back Transactions: Not Capable [Driver Information] Driver Manufacturer: Renesas Electronics Driver Description: Renesas Electronics USB 3.0 Host Controller Driver Provider: Renesas Electronics Driver Version: 2.0.30.0 Driver Date: 19-Nov-2010 DeviceInstanceId PCI\VEN_1033&DEV_0194&SUBSYS_50071458&REV_03\4&115A8633&0&0010 USB Root Hub -------------------------------------------------------------- [Port1] : No Device Connected --------------------------------------------- [Port2] : No Device Connected --------------------------------------------- [Port3] : No Device Connected --------------------------------------------- [Port4] : No Device Connected --------------------------------------------- Intel 5520/5500/X58/7500 I/O Hub - PCI Express Root Port #3 (x16/x8/x4) --- [General Information] Device Name: Intel 5520/5500/X58/7500 I/O Hub - PCI Express Root Port #3 (x16/x8/x4) Original Device Name: Intel 5520/5500/X58/7500 I/O Hub - PCI Express Root Port #3 (x16/x8/x4) Device Class: PCI-to-PCI Bridge Revision ID: 13 Bus Number: 0 Device Number: 3 Function Number: 0 PCI Latency Timer: 0 Hardware ID: PCI\VEN_8086&DEV_340A&SUBSYS_00000000&REV_13 [PCI Express] Version: 2.0 Maximum Link Width: 16x Current Link Width: 16x Maximum Link Speed: 5.0 Gb/s Current Link Speed: 5.0 Gb/s Device/Port Type: Root Port of PCI Express Root Complex Slot Implemented: Yes Hot-Plug: Not Capable Hot-Plug Surprise: Not Capable Slot Power Limit: 75.000 W Active State Power Management (ASPM) Support: L0s and L1 Active State Power Management (ASPM) Status: Disabled [System Resources] Interrupt Line: IRQ16 Interrupt Pin: INTA# [Features] Bus Mastering: Enabled Running At 66 MHz: Not Capable Fast Back-to-Back Transactions: Not Capable [Driver Information] Driver Manufacturer: Intel Driver Description: Intel(R) 7500/5520/5500/X58 I/O Hub PCI Express Root Port 3 - 340A Driver Provider: Intel Driver Version: 9.1.1.1026 Driver Date: 08-Feb-2010 DeviceInstanceId PCI\VEN_8086&DEV_340A&SUBSYS_50011458&REV_13\3&13C0B0C5&0&18 PCI Express x16 Bus #2 ---------------------------------------------------- nVidia GeForce GTX 570 (p1261) -------------------------------------------- [General Information] Device Name: nVidia GeForce GTX 570 (p1261) Original Device Name: nVIDIA GeForce GTX 570 (GF110) Device Class: VGA Compatible Adapter Revision ID: A1 Bus Number: 2 Device Number: 0 Function Number: 0 PCI Latency Timer: 0 Hardware ID: PCI\VEN_10DE&DEV_1081&SUBSYS_087E10DE&REV_A1 [PCI Express] Version: 2.0 Maximum Link Width: 16x Current Link Width: 16x Maximum Link Speed: 5.0 Gb/s Current Link Speed: 5.0 Gb/s Device/Port Type: PCI Express Endpoint Slot Implemented: No Active State Power Management (ASPM) Support: L0s and L1 Active State Power Management (ASPM) Status: Disabled [System Resources] Interrupt Line: IRQ16 Interrupt Pin: INTA# Memory Base Address 0 F7000000 Memory Base Address 1 D0000000 Memory Base Address 3 DE000000 I/O Base Address 5 AF00 [Features] Bus Mastering: Enabled Running At 66 MHz: Not Capable Fast Back-to-Back Transactions: Not Capable [Driver Information] Driver Manufacturer: NVIDIA Driver Description: NVIDIA GeForce GTX 570 Driver Provider: NVIDIA Driver Version: 8.17.13.142 Driver Date: 15-May-2012 DeviceInstanceId PCI\VEN_10DE&DEV_1081&SUBSYS_087E10DE&REV_A1\4&2ABA1BF6&0&0018 nVIDIA GF110 - High Definition Audio Controller --------------------------- [General Information] Device Name: nVIDIA GF110 - High Definition Audio Controller Original Device Name: nVIDIA GF110 - High Definition Audio Controller Device Class: Mixed mode device Revision ID: A1 Bus Number: 2 Device Number: 0 Function Number: 1 PCI Latency Timer: 0 Hardware ID: |
Nitin Puri Send message Joined: 24 Jul 99 Posts: 10 Credit: 2,574,735 RAC: 1 |
Hi, also Andrew King suggested I add this error message he uncovered: -185 error message for each with this in the Stderr output: "<core_client_version>7.0.28</core_client_version> <![CDATA[ <message> couldn't start Can't write init file: -108: -108 </message>" |
©2024 University of California
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.