Message boards :
Number crunching :
Development BOINC 7.0.62
Message board moderation
Previous · 1 · 2 · 3 · 4 · 5 · Next
Author | Message |
---|---|
MarkJ Send message Joined: 17 Feb 08 Posts: 1139 Credit: 80,854,192 RAC: 5 |
7.0.47 change log - WINSETUP: Change description text for service installs |
TBar Send message Joined: 22 May 99 Posts: 5204 Credit: 840,779,836 RAC: 2,768 |
7.0.45 change log Has anyone noticed 7.0.45 Restarting intermittently? I've noticed this a few times on my MacPro running XPsp3 32-bit. The BOINC Manager activity freezes, the text disappears, then a few seconds later the activity resumes after an obvious Restart. I can't find any log of why this is happening. There are NO Error messages, just a Restart. I've also noticed that this appears to be happening right at the End of an ATI AstroPulse Task. Right when the notorious "Access Violation (0xc0000005)" Error would be preparing to occur. So far, I haven't had any Access Violation (0xc0000005) Errors with 7.0.45, just unexplained restarts. Here is the last AstroPulse task that ran. There is nothing about a restart with one minute left in the task. It happened though, I watched it. With around one minute left in the task, the BOINC Manager Restarted. The task finished normally after the Restart, Task 2816854170 |
TBar Send message Joined: 22 May 99 Posts: 5204 Credit: 840,779,836 RAC: 2,768 |
Oops, wrong task, it was this one Task 2816854176 There is an Error there, but, Now it's listed as a Success. At the very bottom you can see the Restart. So... Now BOINC Restarts and runs the task again? When did this start? Or...Restart? 2/1/2013 2:14:58 PM | | Starting BOINC client version 7.0.45 for windows_intelx86 2/1/2013 2:14:58 PM | | log flags: file_xfer, sched_ops, task 2/1/2013 2:14:58 PM | | Libraries: libcurl/7.25.0 OpenSSL/1.0.1 zlib/1.2.6 2/1/2013 2:14:58 PM | | Data directory: C:\Documents and Settings\All Users\Application Data\BOINC 2/1/2013 2:14:58 PM | | Running under account Tom 2/1/2013 2:14:58 PM | | Processor: 4 GenuineIntel Intel(R) Xeon(R) CPU E5462 @ 2.80GHz [Family 6 Model 23 Stepping 6] 2/1/2013 2:14:58 PM | | Processor: 6.00 MB cache 2/1/2013 2:14:58 PM | | Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss htt tm pni ssse3 cx16 sse4_1 nx lm vmx tm2 dca pbe 2/1/2013 2:14:58 PM | | OS: Microsoft Windows XP: Professional x86 Edition, Service Pack 3, (05.01.2600.00) 2/1/2013 2:14:58 PM | | Memory: 1.99 GB physical, 6.81 GB virtual 2/1/2013 2:14:58 PM | | Disk: 217.90 GB total, 184.63 GB free 2/1/2013 2:14:58 PM | | Local time is UTC -5 hours 2/1/2013 2:14:58 PM | | CUDA: NVIDIA GPU 0: GeForce 8800 GT (driver version 306.81, CUDA version 5.0, compute capability 1.1, 512MB, 466MB available, 504 GFLOPS peak) 2/1/2013 2:14:58 PM | | CAL: ATI GPU 0: AMD Radeon HD 6800 series (Barts) (CAL version 1.4.1664, 1024MB, 992MB available, 2976 GFLOPS peak) 2/1/2013 2:14:58 PM | | OpenCL: NVIDIA GPU 0: GeForce 8800 GT (driver version 306.81, device version OpenCL 1.0 CUDA, 512MB, 466MB available, 504 GFLOPS peak) 2/1/2013 2:14:58 PM | | OpenCL: ATI GPU 0: AMD Radeon HD 6800 series (Barts) (driver version CAL 1.4.1664, device version OpenCL 1.1 AMD-APP (851.4), 1024MB, 992MB available, 2976 GFLOPS peak) 2/1/2013 2:14:58 PM | SETI@home | Found app_info.xml; using anonymous platform 2/1/2013 2:14:58 PM | | Config: simulate 4 CPUs 2/1/2013 2:14:58 PM | | Config: use all coprocessors 2/1/2013 2:14:58 PM | SETI@home | URL http://setiathome.berkeley.edu/; Computer ID 6797524; resource share 100 2/1/2013 2:14:58 PM | SETI@home | General prefs: from SETI@home (last modified 13-Jan-2013 17:48:58) 2/1/2013 2:14:58 PM | SETI@home | Computer location: work 2/1/2013 2:14:58 PM | SETI@home | General prefs: no separate prefs for work; using your defaults 2/1/2013 2:14:58 PM | | Reading preferences override file 2/1/2013 2:14:58 PM | | Preferences: 2/1/2013 2:14:58 PM | | max memory usage when active: 1324.73MB 2/1/2013 2:14:58 PM | | max memory usage when idle: 1528.53MB 2/1/2013 2:14:58 PM | | max disk usage: 30.00GB 2/1/2013 2:14:58 PM | | max CPUs used: 3 2/1/2013 2:14:58 PM | | suspend work if non-BOINC CPU load exceeds 50 % 2/1/2013 2:14:58 PM | | (to change preferences, visit the web site of an attached project, or select Preferences in the Manager) 2/1/2013 2:14:58 PM | | Using proxy info from GUI 2/1/2013 2:14:58 PM | | Not using a proxy 2/1/2013 2:14:59 PM | SETI@home | Started download of ap_17dc12ab_B2_P0_00196_20130201_25387.wu 2/1/2013 2:14:59 PM | SETI@home | Started download of ap_16dc12ad_B6_P1_00297_20130201_27268.wu 2/1/2013 2:14:59 PM | SETI@home | Started download of ap_16dc12ad_B6_P1_00298_20130201_27268.wu 2/1/2013 2:14:59 PM | SETI@home | Started download of ap_17dc12ab_B3_P1_00019_20130201_10842.wu 2/1/2013 2:14:59 PM | SETI@home | Started download of ap_17dc12ad_B2_P0_00204_20130201_10043.wu 2/1/2013 2:14:59 PM | SETI@home | Started download of ap_17dc12ab_B5_P1_00004_20130201_24812.wu 2/1/2013 2:14:59 PM | SETI@home | Started download of 28dc12ab.25537.23139.8.10.176 2/1/2013 2:14:59 PM | SETI@home | Started download of ap_27dc12ab_B1_P0_00305_20130201_05661.wu 2/1/2013 2:14:59 PM | SETI@home | Restarting task ap_03ja13ac_B6_P0_00050_20130127_25613.wu_2 using astropulse_v6 version 601 in slot 4 2/1/2013 2:14:59 PM | SETI@home | Restarting task ap_15dc12aa_B2_P0_00363_20130127_21641.wu_2 using astropulse_v6 version 601 in slot 2 2/1/2013 2:14:59 PM | SETI@home | Restarting task ap_14dc12ac_B5_P1_00025_20130127_06087.wu_2 using astropulse_v6 version 601 in slot 3 2/1/2013 2:14:59 PM | SETI@home | Restarting task ap_03ja13ai_B2_P0_00302_20130130_18386.wu_1 using astropulse_v6 version 604 (ati_opencl_100) in slot 0 2/1/2013 2:14:59 PM | SETI@home | Restarting task 17dc12ab.9030.10292.15.10.112_1 using setiathome_enhanced version 609 (cuda23) in slot 1 2/1/2013 2:15:45 PM | SETI@home | Computation for task ap_03ja13ai_B2_P0_00302_20130130_18386.wu_1 finished 2/1/2013 2:15:45 PM | SETI@home | Starting task ap_03ja13aa_B5_P0_00366_20130130_17826.wu_0 using astropulse_v6 version 604 (ati_opencl_100) in slot 5 2/1/2013 2:15:47 PM | SETI@home | Started upload of ap_03ja13ai_B2_P0_00302_20130130_18386.wu_1_0 2/1/2013 2:16:01 PM | SETI@home | Finished upload of ap_03ja13ai_B2_P0_00302_20130130_18386.wu_1_0 ... BTW, just to let you know, while all that 'debugging' was going on, My Computer Was Going Unresponsive and I was going Nuts trying to figure out what was going on. Now I know. Oh, I thought there might be something wrong with the hard drive because of all your debugging, so I installed RamDisk and placed the Windows page file in Ram. Now the computer doesn't go Unresponsive during your 'debugging'. So, you might find some strange page file activity starting last night when I moved the page file to a Ramdisk. |
MarkJ Send message Joined: 17 Feb 08 Posts: 1139 Credit: 80,854,192 RAC: 5 |
7.0.48 change log - client (Win) fixes/improvements to CPU feature detection, from Robert Kreß |
Ex: "Socialist" Send message Joined: 12 Mar 12 Posts: 3433 Credit: 2,616,158 RAC: 2 |
|
MarkJ Send message Joined: 17 Feb 08 Posts: 1139 Credit: 80,854,192 RAC: 5 |
It seems there is an issue with PAE or service installs, so expect a new version out soon. I believe it only effects windows users. Those windows users that run BOINC as a service might want to hold off on this one. BOINC blog |
Jord Send message Joined: 9 Jun 99 Posts: 15184 Credit: 4,362,181 RAC: 3 |
I believe it only effects windows users. Those windows users that run BOINC as a service might want to hold off on this one. It only affects Windows Home and Windows Basic users. So if your Windows is one of those, don't use this version. The developers are busy throwing out Android versions of BOINC for now, so that's what version 7.0.50 is. Do not use this one on your PC or Mac. |
Mike Davis Send message Joined: 17 May 99 Posts: 240 Credit: 5,402,361 RAC: 0 |
Anyone know what they changed to do with proxies? 7.0.28 would still complete a download if you changed to a proxy after file had started downloading whereas I have tried with 7.0.44 & 7.0.48 both fail download if you switch with a permanent http error |
MarkJ Send message Joined: 17 Feb 08 Posts: 1139 Credit: 80,854,192 RAC: 5 |
7.0.52 change log - WINSETUP: Revert my change to interpret the Service Install checkbox as an integer. Internally if the property contains a value it is true, otherwise false. Confirmed by Kevin 7.0.51 change log - client: job scheduler tweak to avoid CPU idleness in situation where GPU jobs use different CPU fractions 7.0.50 change log - WINSETUP: Update the custom actions that use the ENABLEPROTECTEDAPPLICATIONEXECUTION property 7.0.49 change log - manager: fix some compile warnings on Unix |
Wedge009 Send message Joined: 3 Apr 99 Posts: 451 Credit: 431,396,357 RAC: 553 |
I appreciate this change: client: work fetch: if there are idle devices, we need to ask the highest-prio project for work for all of them (don't scale by the fetchable resource share!). This should fix some device starvation problems. Soli Deo Gloria |
Sutaru Tsureku Send message Joined: 6 Apr 07 Posts: 7105 Credit: 147,663,825 RAC: 5 |
I just could install the v7.0.52 over v7.0.28, or is there something what I must take care about? * Best regards! :-) * Philip J. Fry (formerly Sutaru Tsureku), team seti.international founder. * Optimize your PC for higher RAC. * SETI@home needs your help. * |
Claggy Send message Joined: 5 Jul 99 Posts: 4654 Credit: 47,537,079 RAC: 4 |
I just could install the v7.0.52 over v7.0.28, or is there something what I must take care about? If you don't have flops values in your app_info, you'll want to run your GPU cache down first before upgrading, otherwise existing GPU Wu's will be on the verge of going Maximum Time Exceeded, (because of a increased internal flops value for GPU Wu's) New GPU Wu's will get revised <rsc_fpops_est> and <rsc_fpops_bound> values. Or Reset the project once you're upgraded (only needed to be done at projects where you run an app_info that doesn't have a flops entry). Change Log 7.0.31 --> 7.0.32 Claggy |
TBar Send message Joined: 22 May 99 Posts: 5204 Credit: 840,779,836 RAC: 2,768 |
I'm having trouble with 7.0.44 when trying to add more than one "hostname for which proxy not used" There is a similar entry box in the GUI, I haven't had any luck there either. So, let's stick to the cc_config.xml file; <proxy_info> [ <http_server_name></http_server_name> ] [ <http_server_port>80</http_server_port> ] [ <http_user_name></http_user_name> ] [ <http_user_passwd></http_user_passwd> ] [ <socks_version>5</socks_version> ] [ <socks_server_name></socks_server_name> ] [ <socks_server_port>80</socks_server_port> ] [ <socks5_user_name></socks5_user_name> ] [ <socks5_user_passwd></socks5_user_passwd> ] [ <no_proxy>list of hostnames for which proxy not used</no_proxy> ] </proxy_info> As you see, there isn't any note on what separator to use. I have tried many, none have worked. I then tried using separate entries, the entry for the Upload works, the one for the Scheduler doesn't. Unless I remove the one for the Uploader. It doesn't matter which is listed first, I can't seem to get both entries to work at the same time. This is what I have at the moment, like I said, I have tried many different combinations; <proxy_info> [ <http_server_name>192.168.1.3</http_server_name> ] [ <http_server_port>5555</http_server_port> ] [ <no_proxy>http://setiboincdata.ssl.berkeley.edu/sah_cgi/file_upload_handler http://setiboinc.ssl.berkeley.edu/sah_cgi/cgi</no_proxy> ] </proxy_info> Or; <proxy_info> [ <http_server_name>192.168.1.3</http_server_name> ] [ <http_server_port>5555</http_server_port> ] [ <no_proxy>http://setiboinc.ssl.berkeley.edu/sah_cgi/cgi</no_proxy> ] [ <no_proxy>http://setiboincdata.ssl.berkeley.edu/sah_cgi/file_upload_handler</no_proxy> ] </proxy_info> Suggestions? |
Claggy Send message Joined: 5 Jul 99 Posts: 4654 Credit: 47,537,079 RAC: 4 |
I'm having trouble with 7.0.44 when trying to add more than one "hostname for which proxy not used" There is a similar entry box in the GUI, I haven't had any luck there either. Boinc Manager is the GUI for connecting to Boinc clients eithier locally, or to other clients on your network, my take is that when it says hostnames it means which hosts on your network shouldn't use a proxy, it doesn't ask for url's does it? Claggy |
TBar Send message Joined: 22 May 99 Posts: 5204 Credit: 840,779,836 RAC: 2,768 |
But, it does work with the URL. It just doesn't work with Two URLs. 2/26/2013 5:52:37 PM | SETI@home | Sending scheduler request: To fetch work. 2/26/2013 5:52:37 PM | SETI@home | Reporting 1 completed tasks 2/26/2013 5:52:37 PM | SETI@home | Requesting new tasks for NVIDIA and ATI 2/26/2013 5:52:37 PM | SETI@home | [http] HTTP_OP::init_post(): http://setiboinc.ssl.berkeley.edu/sah_cgi/cgi 2/26/2013 5:52:37 PM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle set 2/26/2013 5:52:37 PM | SETI@home | [http] [ID#1] Info: Connection #2 seems to be dead! 2/26/2013 5:52:37 PM | SETI@home | [http] [ID#1] Info: Closing connection #2 2/26/2013 5:52:37 PM | SETI@home | [http] [ID#1] Info: Connection #3 seems to be dead! 2/26/2013 5:52:37 PM | SETI@home | [http] [ID#1] Info: Closing connection #3 2/26/2013 5:52:38 PM | SETI@home | [http] [ID#1] Info: About to connect() to setiboinc.ssl.berkeley.edu port 80 (#0) 2/26/2013 5:52:38 PM | SETI@home | [http] [ID#1] Info: Trying 208.68.240.20... 2/26/2013 5:52:38 PM | SETI@home | [http] [ID#1] Info: Connected to setiboinc.ssl.berkeley.edu (208.68.240.20) port 80 (#0) 2/26/2013 5:52:38 PM | SETI@home | [http] [ID#1] Info: Connected to setiboinc.ssl.berkeley.edu (208.68.240.20) port 80 (#0) 2/26/2013 5:52:38 PM | SETI@home | [http] [ID#1] Sent header to server: POST /sah_cgi/cgi HTTP/1.1 2/26/2013 5:52:38 PM | SETI@home | [http] [ID#1] Sent header to server: User-Agent: BOINC client (windows_intelx86 7.0.44) 2/26/2013 5:52:38 PM | SETI@home | [http] [ID#1] Sent header to server: Host: setiboinc.ssl.berkeley.edu 2/26/2013 5:52:38 PM | SETI@home | [http] [ID#1] Sent header to server: Accept: */* 2/26/2013 5:52:38 PM | SETI@home | [http] [ID#1] Sent header to server: Accept-Encoding: deflate, gzip 2/26/2013 5:52:38 PM | SETI@home | [http] [ID#1] Sent header to server: Content-Type: application/x-www-form-urlencoded 2/26/2013 5:52:38 PM | SETI@home | [http] [ID#1] Sent header to server: Content-Length: 49232 2/26/2013 5:52:38 PM | SETI@home | [http] [ID#1] Sent header to server: Expect: 100-continue 2/26/2013 5:52:38 PM | SETI@home | [http] [ID#1] Sent header to server: 2/26/2013 5:52:38 PM | SETI@home | [http] [ID#1] Received header from server: HTTP/1.1 100 Continue 2/26/2013 5:52:39 PM | SETI@home | [http] [ID#1] Received header from server: HTTP/1.1 200 OK 2/26/2013 5:52:39 PM | SETI@home | [http] [ID#1] Received header from server: Date: Tue, 26 Feb 2013 22:52:30 GMT 2/26/2013 5:52:39 PM | SETI@home | [http] [ID#1] Received header from server: Server: Apache/2.2.15 (Scientific Linux) 2/26/2013 5:52:39 PM | SETI@home | [http] [ID#1] Received header from server: Connection: close 2/26/2013 5:52:39 PM | SETI@home | [http] [ID#1] Received header from server: Transfer-Encoding: chunked 2/26/2013 5:52:39 PM | SETI@home | [http] [ID#1] Received header from server: Content-Type: text/xml 2/26/2013 5:52:39 PM | SETI@home | [http] [ID#1] Received header from server: 2/26/2013 5:52:40 PM | SETI@home | [http] [ID#1] Info: Closing connection #0 2/26/2013 5:52:41 PM | SETI@home | Scheduler request completed: got 1 new tasks 2/26/2013 5:52:43 PM | SETI@home | [http] HTTP_OP::init_get(): http://boinc2.ssl.berkeley.edu/sah/download_fanout/2a4/06my12ai.31921.8008.10.10.68 2/26/2013 5:52:43 PM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle 'C:\Program Files\BOINC\ca-bundle.crt' 2/26/2013 5:52:43 PM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle set 2/26/2013 5:52:43 PM | SETI@home | Started download of 06my12ai.31921.8008.10.10.68 2/26/2013 5:52:43 PM | SETI@home | [http] [ID#9306] Info: About to connect() to proxy 192.168.1.3 port 5555 (#0) 2/26/2013 5:52:43 PM | SETI@home | [http] [ID#9306] Info: Trying 192.168.1.3... 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Info: Connected to 192.168.1.3 (192.168.1.3) port 5555 (#0) 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Info: Connected to 192.168.1.3 (192.168.1.3) port 5555 (#0) 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Sent header to server: GET http://boinc2.ssl.berkeley.edu/sah/download_fanout/2a4/06my12ai.31921.8008.10.10.68 HTTP/1.1 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Sent header to server: User-Agent: BOINC client (windows_intelx86 7.0.44) 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Sent header to server: Host: boinc2.ssl.berkeley.edu 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Sent header to server: Accept: */* 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Sent header to server: Accept-Encoding: deflate, gzip 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Sent header to server: Proxy-Connection: Keep-Alive 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Sent header to server: Content-Type: application/x-www-form-urlencoded 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Sent header to server: 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Info: HTTP 1.0, assume close after body 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Received header from server: HTTP/1.0 200 OK 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Received header from server: Server: nginx/1.0.15 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Received header from server: Date: Tue, 26 Feb 2013 22:52:37 GMT 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Received header from server: Content-Type: application/octet-stream 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Received header from server: Content-Length: 375542 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Received header from server: Last-Modified: Tue, 26 Feb 2013 15:55:08 GMT 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Received header from server: Accept-Ranges: bytes 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Received header from server: X-Cache: MISS from iSETI 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Received header from server: X-Cache-Lookup: MISS from iSETI:5555 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Received header from server: Via: 1.0 iSETI (squid/3.1.19) 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Info: HTTP/1.0 connection set to keep alive! 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Received header from server: Connection: keep-alive 2/26/2013 5:52:44 PM | SETI@home | [http] [ID#9306] Received header from server: 2/26/2013 5:53:36 PM | SETI@home | [http] [ID#9306] Info: Connection #0 to host 192.168.1.3 left intact 2/26/2013 5:53:37 PM | SETI@home | Finished download of 06my12ai.31921.8008.10.10.68 No Proxy for the Scheduler that time with; <proxy_info> [ <http_server_name>192.168.1.3</http_server_name> ] [ <http_server_port>5555</http_server_port> ] [ <no_proxy>http://setiboinc.ssl.berkeley.edu/sah_cgi/cgi http://setiboincdata.ssl.berkeley.edu/sah_cgi/file_upload_handler</no_proxy> ] </proxy_info> But then I get; 2/26/2013 6:12:04 PM | SETI@home | [http] [ID#9329] Info: Connected to 192.168.1.3 (192.168.1.3) port 5555 (#0) 2/26/2013 6:12:04 PM | SETI@home | [http] [ID#9329] Sent header to server: POST http://setiboincdata.ssl.berkeley.edu/sah_cgi/file_upload_handler HTTP/1.1 2/26/2013 6:12:04 PM | SETI@home | [http] [ID#9329] Sent header to server: User-Agent: BOINC client (windows_intelx86 7.0.44) 2/26/2013 6:12:04 PM | SETI@home | [http] [ID#9329] Sent header to server: Host: setiboincdata.ssl.berkeley.edu 2/26/2013 6:12:04 PM | SETI@home | [http] [ID#9329] Sent header to server: Accept: */* 2/26/2013 6:12:04 PM | SETI@home | [http] [ID#9329] Sent header to server: Accept-Encoding: deflate, gzip 2/26/2013 6:12:04 PM | SETI@home | [http] [ID#9329] Sent header to server: Proxy-Connection: Keep-Alive 2/26/2013 6:12:04 PM | SETI@home | [http] [ID#9329] Sent header to server: Content-Type: application/x-www-form-urlencoded 2/26/2013 6:12:04 PM | SETI@home | [http] [ID#9329] Sent header to server: Content-Length: 30496 2/26/2013 6:12:04 PM | SETI@home | [http] [ID#9329] Sent header to server: Expect: 100-continue 2/26/2013 6:12:04 PM | SETI@home | [http] [ID#9329] Sent header to server: 2/26/2013 6:12:04 PM | SETI@home | [http] [ID#9329] Info: HTTP 1.0, assume close after body 2/26/2013 6:12:04 PM | SETI@home | [http] [ID#9329] Received header from server: HTTP/1.0 417 Expectation Failed 2/26/2013 6:12:04 PM | SETI@home | [http] [ID#9329] Received header from server: Server: squid/3.1.19 2/26/2013 6:12:04 PM | SETI@home | [http] [ID#9329] Received header from server: Mime-Version: 1.0 2/26/2013 6:12:04 PM | SETI@home | [http] [ID#9329] Received header from server: Date: Tue, 26 Feb 2013 23:12:11 GMT 2/26/2013 6:12:04 PM | SETI@home | [http] [ID#9329] Received header from server: Content-Type: text/html 2/26/2013 6:12:04 PM | SETI@home | [http] [ID#9329] Received header from server: Content-Length: 4359 2/26/2013 6:12:04 PM | SETI@home | [http] [ID#9329] Received header from server: X-Squid-Error: ERR_INVALID_REQ 0 But, swap the URLs; 2/26/2013 6:22:03 PM | SETI@home | Started upload of 06my12ai.29501.90607.6.10.147_1_0 2/26/2013 6:22:04 PM | SETI@home | [http] [ID#9345] Info: About to connect() to setiboincdata.ssl.berkeley.edu port 80 (#0) 2/26/2013 6:22:04 PM | SETI@home | [http] [ID#9345] Info: Trying 208.68.240.16... 2/26/2013 6:22:04 PM | SETI@home | [http] [ID#9345] Info: Connected to setiboincdata.ssl.berkeley.edu (208.68.240.16) port 80 (#0) 2/26/2013 6:22:04 PM | SETI@home | [http] [ID#9345] Info: Connected to setiboincdata.ssl.berkeley.edu (208.68.240.16) port 80 (#0) 2/26/2013 6:22:04 PM | SETI@home | [http] [ID#9345] Sent header to server: POST /sah_cgi/file_upload_handler HTTP/1.1 2/26/2013 6:22:04 PM | SETI@home | [http] [ID#9345] Sent header to server: User-Agent: BOINC client (windows_intelx86 7.0.44) 2/26/2013 6:22:04 PM | SETI@home | [http] [ID#9345] Sent header to server: Host: setiboincdata.ssl.berkeley.edu 2/26/2013 6:22:04 PM | SETI@home | [http] [ID#9345] Sent header to server: Accept: */* 2/26/2013 6:22:04 PM | SETI@home | [http] [ID#9345] Sent header to server: Accept-Encoding: deflate, gzip 2/26/2013 6:22:04 PM | SETI@home | [http] [ID#9345] Sent header to server: Content-Type: application/x-www-form-urlencoded 2/26/2013 6:22:04 PM | SETI@home | [http] [ID#9345] Sent header to server: Content-Length: 286 2/26/2013 6:22:04 PM | SETI@home | [http] [ID#9345] Sent header to server: 2/26/2013 6:22:04 PM | SETI@home | [http] [ID#9345] Received header from server: HTTP/1.1 200 OK 2/26/2013 6:22:04 PM | SETI@home | [http] [ID#9345] Received header from server: Date: Tue, 26 Feb 2013 23:21:52 GMT 2/26/2013 6:22:04 PM | SETI@home | [http] [ID#9345] Received header from server: Server: Apache/2.2.15 (Scientific Linux) 2/26/2013 6:22:04 PM | SETI@home | [http] [ID#9345] Received header from server: Connection: close 2/26/2013 6:22:04 PM | SETI@home | [http] [ID#9345] Received header from server: Transfer-Encoding: chunked 2/26/2013 6:22:04 PM | SETI@home | [http] [ID#9345] Received header from server: Content-Type: text/plain; charset=UTF-8 2/26/2013 6:22:04 PM | SETI@home | [http] [ID#9345] Received header from server: 2/26/2013 6:22:05 PM | SETI@home | [http] [ID#9345] Info: Closing connection #0 2/26/2013 6:22:05 PM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle set 2/26/2013 6:22:05 PM | SETI@home | [http] [ID#9345] Info: About to connect() to setiboincdata.ssl.berkeley.edu port 80 (#0) 2/26/2013 6:22:05 PM | SETI@home | [http] [ID#9345] Info: Trying 208.68.240.16... 2/26/2013 6:22:05 PM | SETI@home | [http] [ID#9345] Info: Connected to setiboincdata.ssl.berkeley.edu (208.68.240.16) port 80 (#0) 2/26/2013 6:22:05 PM | SETI@home | [http] [ID#9345] Info: Connected to setiboincdata.ssl.berkeley.edu (208.68.240.16) port 80 (#0) 2/26/2013 6:22:05 PM | SETI@home | [http] [ID#9345] Sent header to server: POST /sah_cgi/file_upload_handler HTTP/1.1 2/26/2013 6:22:05 PM | SETI@home | [http] [ID#9345] Sent header to server: User-Agent: BOINC client (windows_intelx86 7.0.44) 2/26/2013 6:22:05 PM | SETI@home | [http] [ID#9345] Sent header to server: Host: setiboincdata.ssl.berkeley.edu 2/26/2013 6:22:05 PM | SETI@home | [http] [ID#9345] Sent header to server: Accept: */* 2/26/2013 6:22:05 PM | SETI@home | [http] [ID#9345] Sent header to server: Accept-Encoding: deflate, gzip 2/26/2013 6:22:05 PM | SETI@home | [http] [ID#9345] Sent header to server: Content-Type: application/x-www-form-urlencoded 2/26/2013 6:22:05 PM | SETI@home | [http] [ID#9345] Sent header to server: Content-Length: 30496 2/26/2013 6:22:05 PM | SETI@home | [http] [ID#9345] Sent header to server: Expect: 100-continue 2/26/2013 6:22:05 PM | SETI@home | [http] [ID#9345] Sent header to server: 2/26/2013 6:22:05 PM | SETI@home | [http] [ID#9345] Received header from server: HTTP/1.1 100 Continue 2/26/2013 6:22:06 PM | SETI@home | [http] [ID#9345] Received header from server: HTTP/1.1 200 OK 2/26/2013 6:22:06 PM | SETI@home | [http] [ID#9345] Received header from server: Date: Tue, 26 Feb 2013 23:21:53 GMT 2/26/2013 6:22:06 PM | SETI@home | [http] [ID#9345] Received header from server: Server: Apache/2.2.15 (Scientific Linux) 2/26/2013 6:22:06 PM | SETI@home | [http] [ID#9345] Received header from server: Connection: close 2/26/2013 6:22:06 PM | SETI@home | [http] [ID#9345] Received header from server: Transfer-Encoding: chunked 2/26/2013 6:22:06 PM | SETI@home | [http] [ID#9345] Received header from server: Content-Type: text/plain; charset=UTF-8 2/26/2013 6:22:06 PM | SETI@home | [http] [ID#9345] Received header from server: 2/26/2013 6:22:06 PM | SETI@home | [http] [ID#9345] Info: Closing connection #0 2/26/2013 6:22:07 PM | SETI@home | Finished upload of 06my12ai.29501.90607.6.10.147_1_0 |
TBar Send message Joined: 22 May 99 Posts: 5204 Credit: 840,779,836 RAC: 2,768 |
BTW, if you manually hit the Update button, the scheduler Request will usually go through even though it goes through Squid. Why doesn't it work when the Scheduler originates the Request? I make the Request, it usually works. Scheduler makes the Request, Error 417. I tried it with the URLs on different lines this time, still went through the Proxy; proxy_info> [ <http_server_name>192.168.1.3</http_server_name> ] [ <http_server_port>5555</http_server_port> ] [ <no_proxy>http://setiboincdata.ssl.berkeley.edu/sah_cgi/file_upload_handler http://setiboinc.ssl.berkeley.edu/sah_cgi/cgi</no_proxy> ] </proxy_info> My Request usually go through; 2/26/2013 7:22:48 PM | SETI@home | Sending scheduler request: Requested by user. 2/26/2013 7:22:48 PM | SETI@home | Reporting 1 completed tasks 2/26/2013 7:22:48 PM | SETI@home | Requesting new tasks for CPU and NVIDIA and ATI 2/26/2013 7:22:48 PM | SETI@home | [http] HTTP_OP::init_post(): http://setiboinc.ssl.berkeley.edu/sah_cgi/cgi 2/26/2013 7:22:48 PM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle set 2/26/2013 7:22:48 PM | SETI@home | [http] [ID#1] Info: Re-using existing connection! (#0) with host 192.168.1.3 2/26/2013 7:22:48 PM | SETI@home | [http] [ID#1] Info: Connected to 192.168.1.3 (192.168.1.3) port 5555 (#0) 2/26/2013 7:22:48 PM | SETI@home | [http] [ID#1] Sent header to server: POST http://setiboinc.ssl.berkeley.edu/sah_cgi/cgi HTTP/1.0 2/26/2013 7:22:48 PM | SETI@home | [http] [ID#1] Sent header to server: User-Agent: BOINC client (windows_intelx86 7.0.44) 2/26/2013 7:22:48 PM | SETI@home | [http] [ID#1] Sent header to server: Host: setiboinc.ssl.berkeley.edu 2/26/2013 7:22:48 PM | SETI@home | [http] [ID#1] Sent header to server: Accept: */* 2/26/2013 7:22:48 PM | SETI@home | [http] [ID#1] Sent header to server: Accept-Encoding: deflate, gzip 2/26/2013 7:22:48 PM | SETI@home | [http] [ID#1] Sent header to server: Proxy-Connection: Keep-Alive 2/26/2013 7:22:48 PM | SETI@home | [http] [ID#1] Sent header to server: Content-Type: application/x-www-form-urlencoded 2/26/2013 7:22:48 PM | SETI@home | [http] [ID#1] Sent header to server: Content-Length: 49070 2/26/2013 7:22:48 PM | SETI@home | [http] [ID#1] Sent header to server: 2/26/2013 7:22:50 PM | SETI@home | [http] [ID#1] Info: HTTP 1.0, assume close after body 2/26/2013 7:22:50 PM | SETI@home | [http] [ID#1] Received header from server: HTTP/1.0 200 OK 2/26/2013 7:22:50 PM | SETI@home | [http] [ID#1] Received header from server: Date: Wed, 27 Feb 2013 00:22:39 GMT 2/26/2013 7:22:50 PM | SETI@home | [http] [ID#1] Received header from server: Server: Apache/2.2.15 (Scientific Linux) 2/26/2013 7:22:50 PM | SETI@home | [http] [ID#1] Received header from server: Content-Type: text/xml 2/26/2013 7:22:50 PM | SETI@home | [http] [ID#1] Received header from server: X-Cache: MISS from iSETI 2/26/2013 7:22:50 PM | SETI@home | [http] [ID#1] Received header from server: X-Cache-Lookup: MISS from iSETI:5555 2/26/2013 7:22:50 PM | SETI@home | [http] [ID#1] Received header from server: Via: 1.0 iSETI (squid/3.1.19) 2/26/2013 7:22:50 PM | SETI@home | [http] [ID#1] Received header from server: Connection: close 2/26/2013 7:22:50 PM | SETI@home | [http] [ID#1] Received header from server: 2/26/2013 7:22:53 PM | SETI@home | [http] [ID#1] Info: Closing connection #0 2/26/2013 7:22:54 PM | SETI@home | Scheduler request completed: got 2 new tasks 2/26/2013 7:22:56 PM | SETI@home | [http] HTTP_OP::init_get(): http://boinc2.ssl.berkeley.edu/sah/download_fanout/248/17oc12ab.3103.186425.3.10.137 2/26/2013 7:22:56 PM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle 'C:\Program Files\BOINC\ca-bundle.crt' 2/26/2013 7:22:56 PM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle set 2/26/2013 7:22:56 PM | SETI@home | Started download of 17oc12ab.3103.186425.3.10.137 2/26/2013 7:22:56 PM | SETI@home | [http] HTTP_OP::init_get(): http://boinc2.ssl.berkeley.edu/sah/download_fanout/19b/ap_30no12ah_B0_P0_00175_20130226_06429.wu 2/26/2013 7:22:56 PM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle 'C:\Program Files\BOINC\ca-bundle.crt' 2/26/2013 7:22:56 PM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle set 2/26/2013 7:22:56 PM | SETI@home | Started download of ap_30no12ah_B0_P0_00175_20130226_06429.wu 2/26/2013 7:22:56 PM | SETI@home | [http] [ID#9429] Info: About to connect() to proxy 192.168.1.3 port 5555 (#0) 2/26/2013 7:22:56 PM | SETI@home | [http] [ID#9429] Info: Trying 192.168.1.3... 2/26/2013 7:22:56 PM | SETI@home | [http] [ID#9430] Info: About to connect() to proxy 192.168.1.3 port 5555 (#1) 2/26/2013 7:22:56 PM | SETI@home | [http] [ID#9430] Info: Trying 192.168.1.3... 2/26/2013 7:22:57 PM | SETI@home | [http] [ID#9429] Info: Connected to 192.168.1.3 (192.168.1.3) port 5555 (#0) Scheduler has no such luck; 2/26/2013 7:11:12 PM | SETI@home | Sending scheduler request: To fetch work. 2/26/2013 7:11:12 PM | SETI@home | Reporting 1 completed tasks 2/26/2013 7:11:12 PM | SETI@home | Requesting new tasks for NVIDIA 2/26/2013 7:11:12 PM | SETI@home | [http] HTTP_OP::init_post(): http://setiboinc.ssl.berkeley.edu/sah_cgi/cgi 2/26/2013 7:11:12 PM | SETI@home | [http] HTTP_OP::libcurl_exec(): ca-bundle set 2/26/2013 7:11:12 PM | SETI@home | [http] [ID#1] Info: About to connect() to proxy 192.168.1.3 port 5555 (#0) 2/26/2013 7:11:12 PM | SETI@home | [http] [ID#1] Info: Trying 192.168.1.3... 2/26/2013 7:11:12 PM | SETI@home | [http] [ID#1] Info: Connected to 192.168.1.3 (192.168.1.3) port 5555 (#0) 2/26/2013 7:11:12 PM | SETI@home | [http] [ID#1] Info: Connected to 192.168.1.3 (192.168.1.3) port 5555 (#0) 2/26/2013 7:11:12 PM | SETI@home | [http] [ID#1] Sent header to server: POST http://setiboinc.ssl.berkeley.edu/sah_cgi/cgi HTTP/1.1 2/26/2013 7:11:12 PM | SETI@home | [http] [ID#1] Sent header to server: User-Agent: BOINC client (windows_intelx86 7.0.44) 2/26/2013 7:11:12 PM | SETI@home | [http] [ID#1] Sent header to server: Host: setiboinc.ssl.berkeley.edu 2/26/2013 7:11:12 PM | SETI@home | [http] [ID#1] Sent header to server: Accept: */* 2/26/2013 7:11:12 PM | SETI@home | [http] [ID#1] Sent header to server: Accept-Encoding: deflate, gzip 2/26/2013 7:11:12 PM | SETI@home | [http] [ID#1] Sent header to server: Proxy-Connection: Keep-Alive 2/26/2013 7:11:12 PM | SETI@home | [http] [ID#1] Sent header to server: Content-Type: application/x-www-form-urlencoded 2/26/2013 7:11:12 PM | SETI@home | [http] [ID#1] Sent header to server: Content-Length: 49062 2/26/2013 7:11:12 PM | SETI@home | [http] [ID#1] Sent header to server: Expect: 100-continue 2/26/2013 7:11:12 PM | SETI@home | [http] [ID#1] Sent header to server: 2/26/2013 7:11:12 PM | SETI@home | [http] [ID#1] Info: HTTP 1.0, assume close after body 2/26/2013 7:11:12 PM | SETI@home | [http] [ID#1] Received header from server: HTTP/1.0 417 Expectation Failed 2/26/2013 7:11:12 PM | SETI@home | [http] [ID#1] Received header from server: Server: squid/3.1.19 2/26/2013 7:11:12 PM | SETI@home | [http] [ID#1] Received header from server: Mime-Version: 1.0 2/26/2013 7:11:12 PM | SETI@home | [http] [ID#1] Received header from server: Date: Wed, 27 Feb 2013 00:11:18 GMT 2/26/2013 7:11:12 PM | SETI@home | [http] [ID#1] Received header from server: Content-Type: text/html 2/26/2013 7:11:12 PM | SETI@home | [http] [ID#1] Received header from server: Content-Length: 4299 2/26/2013 7:11:12 PM | SETI@home | [http] [ID#1] Received header from server: X-Squid-Error: ERR_INVALID_REQ 0 ---------------------------------------------------- SUCCESS! I think I found it. The separator is.....a comma, WITHOUT A SPACE. So far it appears to be working; <proxy_info> [ <http_server_name>192.168.1.3</http_server_name> ] [ <http_server_port>5555</http_server_port> ] [ <no_proxy>http://setiboincdata.ssl.berkeley.edu/sah_cgi/file_upload_handler,http://setiboinc.ssl.berkeley.edu/sah_cgi/cgi</no_proxy> ] </proxy_info> So far... |
MarkJ Send message Joined: 17 Feb 08 Posts: 1139 Credit: 80,854,192 RAC: 5 |
Its been a while so here are the latest change logs... 7.0.60 change log - Update all_projects_list.xml 7.0.59 change log - Remove Beta/Alpha flag for Linux builds. 7.0.58 change log - XML parser: when skipping unrecognized elements, don't read them into memory 7.0.57 change log -client: alphabetize log flags 7.0.56 change log - MGR: Modify the GUI for the Attach to Project Wizard for the World Community Grid version of the client. These changes should make clearer the difference between attaching to a new BOINC project vs changing which applications a user is choosing to run at World Community Grid. 7.0.55 change log - WINSETUP: When ENABLEUSEBYALLUSERS is true, create the automatic run key in the HKEY_LOCAL_MACHINE registry space. When it is false use HKEY_CURRENT_USER. 7.0.54 change log - MGR: Center the Simple View slide show area, fix wrapping of project description text when project has no slide show |
MarkJ Send message Joined: 17 Feb 08 Posts: 1139 Credit: 80,854,192 RAC: 5 |
7.0.61 change log - Remove more dead projects from project list. |
MarkJ Send message Joined: 17 Feb 08 Posts: 1139 Credit: 80,854,192 RAC: 5 |
7.0.62 change log - MGR: Remove fix of text for the 'reread config files' menu option |
Jord Send message Joined: 9 Jun 99 Posts: 15184 Credit: 4,362,181 RAC: 3 |
7.0.61 change log No, that one is not in 7.0.61 or .62; it'll come to a BOINC near you AFTER 7.0.6x has been released to the public. We first have to test it all. - client: change resource backoff logic. Old: if we requested work and didn't get any, back off from resources for which we requested work. New: for each resource type T: if we requested work for T and didn't get any, back off from T. Also, don't back off if we're already backed off (i.e. if this is a piggyback request). Also, only back off if the RPC was due to an automatic and potentially rapid source (namely: work fetch, result report, trickle up). Also not in it. - client: fix bug that could cause idle GPUs when exclusions are present. The basic problem: the way we assign GPU instances when creating the "run list" is slightly different from the way we assign them when we actually run the jobs; the latter assigns a running job to the instance it's using, but the former doesn't. Solution (kludge): when building the run list, don't reserve instances for currently running jobs. This will result in more jobs in the run list, and avoid starvation. For efficiency, do this only if there are exclusions for this type. Comment (David): this is yet another complexity that would be eliminated if GPU instances were modeled separately. I wish I had time to do that. Guess what? Also not in it. Even - client: don't prefix <task> messages with [task] was not added. What did make it in then? ;-) Preliminary Change Log 7.0.60 --> 7.0.61:
|
©2024 University of California
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.